[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
[readconf.c ssh_config.5]
support negated Host matching, e.g.
Host *.example.org !c.example.org
User mekmitasdigoat
Will match "a.example.org", "b.example.org", but not "c.example.org"
ok markus@
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
- markus@cvs.openbsd.org 2009/10/08 14:03:41
[sshd_config readconf.c ssh_config.5 servconf.c sshd_config.5]
disable protocol 1 by default (after a transition period of about 10 years)
ok deraadt
[readconf.h readconf.c]
Add client option UseRoaming. It doesn't do anything yet but will
control whether the client tries to use roaming if enabled on the
server. From Martin Forssen.
ok markus@
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
[readconf.c]
1) use obsolete instead of alias for consistency
2) oUserKnownHostsFile not obsolete but oGlobalKnownHostsFile2 is
so move the comment.
3) reorder so like options are together
ok djm@
[readconf.c]
don't leave junk (free'd) pointers around in Forward *fwd argument on
failure; avoids double-free in ~C -L handler when given an invalid
forwarding specification; bz#1539 report from adejong AT debian.org
via Colin Watson; ok markus@ dtucker@
[readconf.c]
because parse_forward() is now used to parse all forward types (DLR),
and it malloc's space for host variables, we don't need to malloc
here. fixes small memory leaks.
previously dynamic forwards were not parsed in parse_forward() and
space was not malloc'd in that case.
ok djm@
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
[readconf.c readconf.h ssh.1 ssh_config.5 sshconnect.c]
Move SSH Fingerprint Visualization away from sharing the config option
CheckHostIP to an own config option named VisualHostKey.
While there, fix the behaviour that ssh would draw a random art picture
on every newly seen host even when the option was not enabled.
prodded by deraadt@, discussions,
help and ok markus@ djm@ dtucker@
[ssh_config.5 key.h readconf.c readconf.h ssh-keygen.1 ssh-keygen.c key.c
sshconnect.c]
Introduce SSH Fingerprint ASCII Visualization, a technique inspired by the
graphical hash visualization schemes known as "random art", and by
Dan Kaminsky's musings on the subject during a BlackOp talk at the
23C3 in Berlin.
Scientific publication (original paper):
"Hash Visualization: a New Technique to improve Real-World Security",
Perrig A. and Song D., 1999, International Workshop on Cryptographic
Techniques and E-Commerce (CrypTEC '99)
http://sparrow.ece.cmu.edu/~adrian/projects/validation/validation.pdf
The algorithm used here is a worm crawling over a discrete plane,
leaving a trace (augmenting the field) everywhere it goes.
Movement is taken from dgst_raw 2bit-wise. Bumping into walls
makes the respective movement vector be ignored for this turn,
thus switching to the other color of the chessboard.
Graphs are not unambiguous for now, because circles in graphs can be
walked in either direction.
discussions with several people,
help, corrections and ok markus@ djm@
[readconf.c readconf.h sshconnect2.c]
promote rekeylimit to a int64 so it can hold the maximum useful limit
of 2^32; report and patch from Jan.Pechanec AT Sun.COM, ok dtucker@
[readconf.c]
Honour activep for times (eg ServerAliveInterval) while parsing
ssh_config and ~/.ssh/config so they work properly with Host directives.
From mario.lorenz@wincor-nixdorf.com via bz #1275. ok markus@
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c]
[gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c]
[servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c]
[ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c]
[openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c]
[openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c]
[openbsd-compat/mktemp.c openbsd-compat/port-linux.c]
[openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c]
[openbsd-compat/setproctitle.c openbsd-compat/xmmap.c]
make the portable tree compile again - sprinkle unistd.h and string.h
back in. Don't redefine __unused, as it turned out to be used in
headers on Linux, and replace its use in auth-pam.c with ARGSUSED
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
Damien Miller
Darren Tucker