The file descriptors for socket, stdin, stdout and stderr
aren't necessarily distinct, so check if they are the same to avoid closing
the same fd several times.
ok djm
OpenBSD-Commit-ID: 60d71fd22e9a32f5639d4ba6e25a2f417fc36ac1
Drop compatibility hacks for some ancient SSH
implementations, including ssh.com <=2.* and OpenSSH <= 3.*.
These versions were all released in or before 2001 and predate the
final SSH RFCs. The hacks in question aren't necessary for RFC-
compliant SSH implementations.
ok markus@
OpenBSD-Commit-ID: 4be81c67db57647f907f4e881fb9341448606138
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
fix inverted test on channel open failure path that
"upgraded" a transient failure into a fatal error; reported by sthen and also
seen by benno@; ok sthen@
Upstream-ID: b58b3fbb79ba224599c6cd6b60c934fc46c68472
write the correct buffer when tunnel forwarding; doesn't
matter on OpenBSD (they are the same) but does matter on portable where we
use an output filter to translate os-specific tun/tap headers
Upstream-ID: f1ca94eff48404827b12e1d12f6139ee99a72284
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
Use explicit_bzero() instead of bzero() before free() to
prevent the compiler from optimizing away the bzero() call. OK djm@
Upstream-ID: cdc6197e64c9684c7250e23d60863ee1b53cef1d
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
Return true reason for port forwarding failures where
feasible rather than always "administratively prohibited". bz#2674, ok djm@
Upstream-ID: d901d9887951774e604ca970e1827afaaef9e419
Remove channel_input_port_forward_request(); the only caller
was the recently-removed SSH1 server code so it's now dead code. ok markus@
Upstream-ID: 05453983230a1f439562535fec2818f63f297af9
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
Allow wildcard for PermitOpen hosts as well as ports.
bz#2582, patch from openssh at mzpqnxow.com and jjelen at redhat.com. ok
markus@
Upstream-ID: af0294e9b9394c4e16e991424ca0a47a7cc605f2
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
Only check errno if read() has returned an error. EOF is
not an error. This fixes a problem where the mux master would sporadically
fail to notice that the client had exited. ok mikeb@ djm@
Upstream-ID: 3c2dadc21fac6ef64665688aac8a75fffd57ae53
fix some signed/unsigned integer type mismatches in
format strings; reported by Nicholas Lemonias
Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
fatal() when a remote window update causes the window
value to overflow. Reported by Georg Wicherski, ok markus@
Upstream-ID: ead397a9aceb3bf74ebfa5fcaf259d72e569f351
Fix math error in remote window calculations that causes
eventual stalls for datagram channels. Reported by Georg Wicherski, ok
markus@
Upstream-ID: be54059d11bf64e0d85061f7257f53067842e2ab
For "ssh -L 12345:/tmp/sock" don't fail with "No forward host
name." (we have a path, not a host name). Based on a diff from Jared
Yanovich. OK djm@
Upstream-ID: 2846b0a8c7de037e33657f95afbd282837fc213f
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[channels.c]
allow explicit ::1 and 127.0.0.1 forwarding bind addresses when
GatewayPorts=no; allows client to choose address family;
bz#2222 ok markus@
tb@openbsd.org
djm@openbsd.org
markus@openbsd.org
millert@openbsd.org
deraadt@openbsd.org
Darren Tucker
dtucker@openbsd.org
natano@openbsd.org
naddy@openbsd.org
Damien Miller