reverse the order in which -J/JumpHost proxies are visited to
be more intuitive and document
reported by and manpage bits naddy@
Upstream-ID: 3a68fd6a841fd6cf8cedf6552a9607ba99df179a
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
Allow ExitOnForwardFailure and ClearAllForwardings to be
overridden when using ssh -W (but still default to yes in that case).
bz#2577, ok djm@.
Upstream-ID: 4b20c419e93ca11a861c81c284090cfabc8c54d4
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
Replace by defining IPPORT_RESERVED to zero on Cygwin, which should have
the same effect without causing problems syncing patches with OpenBSD.
Resync the two affected functions with OpenBSD. ok djm, sanity checked
by Corinna.
don't record duplicate LocalForward and RemoteForward
entries; fixes failure with ExitOnForwardFailure+hostname canonicalisation
where the same forwards are added on the second pass through the
configuration file. bz#2562; ok dtucker@
Upstream-ID: 40a51d68b6300f1cc61deecdb7d4847b8b7b0de1
Allow RekeyLimits in excess of 4G up to 2**63 bits
(limited by the return type of scan_scaled). Part of bz#2521, ok djm.
Upstream-ID: 13bea82be566b9704821b1ea05bf7804335c7979
Disable experimental client-side roaming support. Server
side was disabled/gutted for years already, but this aspect was surprisingly
forgotten. Thanks for report from Qualys
Upstream-ID: 2328004b58f431a554d4c1bf67f5407eae3389df
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
Do not prepend "exec" to the shell command run by "Match
exec" in a config file. It's an unnecessary optimization from repurposed
ProxyCommand code and prevents some things working with some shells.
bz#2471, pointed out by res at qoxp.net. ok markus@
Upstream-ID: a1ead25ae336bfa15fb58d8c6b5589f85b4c33a3
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
Fix \-escaping bug that caused forward path parsing to skip
two characters and skip past the end of the string.
Based on patch by Salvador Fandino; ok dtucker@
Upstream-ID: 7b879dc446335677cbe4cb549495636a0535f3bd
Reorder EscapeChar option parsing to avoid a single-byte
out- of-bounds read. bz#2396 from Jaak Ristioja; ok dtucker@
Upstream-ID: 1dc6b5b63d1c8d9a88619da0b27ade461d79b060
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
Host key rotation support.
Add a hostkeys@openssh.com protocol extension (global request) for
a server to inform a client of all its available host key after
authentication has completed. The client may record the keys in
known_hosts, allowing it to upgrade to better host key algorithms
and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default on).
ok markus@
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
add sshd_config HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options to allow sshd to control what public key types
will be accepted. Currently defaults to all. Feedback & ok markus@
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
Tweak config reparsing with host canonicalisation
Make the second pass through the config files always run when
hostname canonicalisation is enabled.
Add a "Match canonical" criteria that allows ssh_config Match
blocks to trigger only in the second config pass.
Add a -G option to ssh that causes it to parse its configuration
and dump the result to stdout, similar to "sshd -T"
Allow ssh_config Port options set in the second config parse
phase to be applied (they were being ignored).
bz#2267 bz#2286; ok markus
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[readconf.c readconf.h ssh.c ssh_config.5]
reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes
the hostname. This allows users to write configurations that always
refer to canonical hostnames, e.g.
CanonicalizeHostname yes
CanonicalDomains int.example.org example.org
CanonicalizeFallbackLocal no
Host *.int.example.org
Compression off
Host *.example.org
User djm
ok markus@
djm@openbsd.org
naddy@openbsd.org
dtucker@openbsd.org
markus@openbsd.org
Darren Tucker
deraadt@openbsd.org
Damien Miller
jcs@openbsd.org
lteo@openbsd.org