[digest.c digest.h hostfile.c kex.c kex.h kexc25519.c kexc25519c.c]
[kexc25519s.c kexdh.c kexecdh.c kexecdhc.c kexecdhs.c kexgex.c kexgexc.c]
[kexgexs.c key.c key.h roaming_client.c roaming_common.c schnorr.c]
[schnorr.h ssh-dss.c ssh-ecdsa.c ssh-rsa.c sshconnect2.c]
Introduce digest API and use it to perform all hashing operations
rather than calling OpenSSL EVP_Digest* directly. Will make it easier
to build a reduced-feature OpenSSH without OpenSSL in future;
feedback, ok markus@
[Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
[chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
[dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
[ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
cipher "chacha20-poly1305@openssh.com" that combines Daniel
Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode.
Inspired by and similar to Adam Langley's proposal for TLS:
http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
but differs in layout used for the MAC calculation and the use of a
second ChaCha20 instance to separately encrypt packet lengths.
Details are in the PROTOCOL.chacha20poly1305 file.
Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
ok markus@ naddy@
[kex.c kex.h myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
use curve25519 for default key exchange (curve25519-sha256@libssh.org);
initial patch from Aris Adamantiadis; ok djm@
[auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
[krl.c krl.h PROTOCOL.krl]
add support for Key Revocation Lists (KRLs). These are a compact way to
represent lists of revoked keys and certificates, taking as little as
a single bit of incremental cost to revoke a certificate by serial number.
KRLs are loaded via the existing RevokedKeys sshd_config option.
feedback and ok markus@
[servconf.c servconf.h sshd.c sshd_config.5 sandbox-rlimit.c]
[sandbox-systrace.c sandbox.h configure.ac Makefile.in]
introduce sandboxing of the pre-auth privsep child using systrace(4).
This introduces a new "UsePrivilegeSeparation=sandbox" option for
sshd_config that applies mandatory restrictions on the syscalls the
privsep child can perform. This prevents a compromised privsep child
from being used to attack other hosts (by opening sockets and proxying)
or probing local kernel attack surface.
The sandbox is implemented using systrace(4) in unsupervised "fast-path"
mode, where a list of permitted syscalls is supplied. Any syscall not
on the list results in SIGKILL being sent to the privsep child. Note
that this requires a kernel with the new SYSTR_POLICY_KILL option.
UsePrivilegeSeparation=sandbox will become the default in the future
so please start testing it now.
feedback dtucker@; ok markus@
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to
port-linux.c to avoid compilation errors. Add -lselinux to ssh when
building with SELinux support to avoid linking failure; report from
amk AT spamfence.net; ok dtucker
host-key-force target rather than a substitution that is replaced with a
comment so that the Makefile.in is still a syntactically valid Makefile
(useful to run the distprep target)
formatter if it is present, followed by nroff and groff respectively.
Fixes distprep target on OpenBSD (which has bumped groff/nroff to ports
in favour of mandoc). feedback and ok tim
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
- djm@cvs.openbsd.org 2008/06/10 03:57:27
[servconf.c match.h sshd_config.5]
support CIDR address matching in sshd_config "Match address" blocks, with
full support for negation and fall-back to classic wildcard matching.
For example:
Match address 192.0.2.0/24,3ffe:ffff::/32,!10.*
PasswordAuthentication yes
addrmatch.c code mostly lifted from flowd's addr.c
feedback and ok dtucker@
[clientloop.c clientloop.h ssh.c mux.c]
tidy up session multiplexing code, moving it into its own file and
making the function names more consistent - making ssh.c and
clientloop.c a fair bit more readable.
ok markus@
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in chroot
required). ok markus@
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in
chroot required). ok markus@
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
[platform.c platform.h sshd.c openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-solaris.c]
[openbsd-compat/port-solaris.h] Add support for Solaris process
contracts, enabled with --use-solaris-contracts. Patch from Chad
Mynhier, tweaked by dtucker@ and myself; ok dtucker@
[bufaux.c bufbn.c Makefile.in]
Move Buffer bignum functions into their own file, bufbn.c. This means
that sftp and sftp-server (which use the Buffer functions in bufaux.c
but not the bignum ones) no longer need to be linked with libcrypto.
ok markus@
[contrib/redhat/sshd.init openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-linux.c]
[openbsd-compat/port-linux.h] Add support for SELinux, setting
the execution and TTY contexts. based on patch from Daniel Walsh,
bz #880; ok dtucker@
[openbsd-compat/port-tun.c openbsd-compat/port-tun.h] Add support
for tunnel forwarding for FreeBSD and NetBSD. NetBSD's support is
limited to IPv4 tunnels only, and most versions don't support the
tap(4) device at all.
defines.h] Bug #125: Add *EXPERIMENTAL* BSM audit support. Configure
--with-audit=bsm to enable. Patch originally from Sun Microsystems,
parts by John R. Jackson. ok djm@
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125:
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
"make survey" and "make send-survey". This will provide data on the
configure parameters, platform and platform features to the development
team, which will allow (among other things) better targetting of testing.
It's entirely voluntary and is off be default. ok djm@
- hshoexer@cvs.openbsd.org 2004/01/23 17:06:03
[cipher.c]
enable acss for ssh
ok deraadt@ markus@
- (djm) [acss.c acss.h cipher-acss.c] Portable support for ACSS
if libcrypto lacks it
Damien Miller
Darren Tucker
Tim Rice
Ben Lindstrom