add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
add a "quiet" flag to exited_cleanly() that supresses
errors about exit status (failure due to signal is still reported)
Upstream-ID: db85c39c3aa08e6ff67fc1fb4ffa89f807a9d2f0
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
Allow IPQoS=none in ssh/sshd to not set an explicit
ToS/DSCP value and just use the operating system default; ok dtucker@
Upstream-ID: 77906ff8c7b660b02ba7cb1e47b17d66f54f1f7e
Switch to recallocarray() for a few operations. Both
growth and shrinkage are handled safely, and there also is no need for
preallocation dances. Future changes in this area will be less error prone.
Review and one bug found by markus
Upstream-ID: 822d664d6a5a1d10eccb23acdd53578a679d5065
Check for integer overflow when parsing times in
convtime(). Reported by nicolas.iooss at m4x.org, ok djm@
Upstream-ID: 35e6a4e98f6fa24df50bfb8ba1307cf70e966f13
On startup, check to see if sshd is already daemonized
and if so, skip the call to daemon() and do not rewrite the PidFile. This
means that when sshd re-execs itself on SIGHUP the process ID will no longer
change. Should address bz#2641. ok djm@ markus@.
Upstream-ID: 5ea0355580056fb3b25c1fd6364307d9638a37b9
Factor out "can bind to low ports" check into its own function. This will
make it easier for Portable to support platforms with permissions models
other than uid==0 (eg bz#2625). ok djm@, "doesn't offend me too much"
deraadt@.
Upstream-ID: 86213df4183e92b8f189a6d2dac858c994bfface
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
don't record duplicate LocalForward and RemoteForward
entries; fixes failure with ExitOnForwardFailure+hostname canonicalisation
where the same forwards are added on the second pass through the
configuration file. bz#2562; ok dtucker@
Upstream-ID: 40a51d68b6300f1cc61deecdb7d4847b8b7b0de1
Another use for fcntl() and thus of the superfluous 3rd
parameter is when sanitising standard fd's before calling daemon().
Use a tweaked version of the ssh(1) function in all three places
found using fcntl() this way.
ok jca@ beck@
Upstream-ID: f16811ffa19a1c5f4ef383c5f0fecb843c84e218
Improve precision of progressmeter for sftp and scp by
storing sub-second timestamps. Pointed out by mmcc@, ok deraadt@ markus@
Upstream-ID: 38fd83a3d83dbf81c8ff7b5d1302382fe54970ab
Handle the split of tun(4) "link0" into tap(4) in ssh
tun-forwarding. Adapted from portable (using separate devices for this is the
normal case in most OS). ok djm@
Upstream-ID: 90facf4c59ce73d6741db1bc926e578ef465cd39
don't try to change tun device flags if they are already
what we need; makes it possible to use tun/tap networking as non- root user
if device permissions and interface flags are pre-established; based on patch
by Ossi Herrala
Upstream-ID: 89099ac4634cd477b066865acf54cb230780fd21
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
when it is available. It takes into account time spent suspended,
thereby ensuring timeouts (e.g. for expiring agent keys) fire
correctly. bz#2228 reported by John Haxby
[misc.c misc.h umac.c]
use get/put_u32 to load values rather than *((UINT32 *)p) that breaks on
strict-alignment architectures; reported by and ok stsp@
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
CLOCK_MONOTONIC...) fails. Some older versions of RHEL have the
CLOCK_MONOTONIC define but don't actually support it. Found and tested
by Kevin Brott, ok djm.
[misc.c]
in ssh_gai_strerror() don't fallback to strerror for EAI_SYSTEM when
errno == 0. Avoids confusing error message in some broken resolver
cases. bz#2122 patch from plautrba AT redhat.com; ok dtucker
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
Damien Miller
djm@openbsd.org
millert@openbsd.org
deraadt@openbsd.org
dtucker@openbsd.org
krw@openbsd.org
Darren Tucker
tobias@openbsd.org
sthen@openbsd.org
lteo@openbsd.org