"ssh-keygen -K". This will save public/private keys into the current
directory.
This is handy if you move a token between hosts.
feedback & ok markus@
OpenBSD-Commit-ID: d57c1f9802f7850f00a117a1d36682a6c6d10da6
Define some well-known error codes in the SK API and pass
them back via ssh-sk-helper.
Use the new "wrong PIN" error code to retry PIN prompting during
ssh-keygen of resident keys.
feedback and ok markus@
OpenBSD-Commit-ID: 9663c6a2bb7a0bc8deaccc6c30d9a2983b481620
Allow passing a PIN via the SK API (API major crank) and let the
ssh-sk-helper API follow.
Also enhance the ssh-sk-helper API to support passing back an error
code instead of a complete reply. Will be used to signal "wrong PIN",
etc.
feedback and ok markus@
OpenBSD-Commit-ID: a1bd6b0a2421646919a0c139b8183ad76d28fb71
"ssh-keygen -t ecdsa-sk|ed25519-sk -x resident" will generate a
device-resident key.
feedback and ok markus@
OpenBSD-Commit-ID: 8e1b3c56a4b11d85047bd6c6c705b7eef4d58431
Move all moduli generation options to live under the -O flag.
Frees up seven single-letter flags.
NB. this change break existing ssh-keygen commandline syntax for moduli-
related operations. Very few people use these fortunately.
feedback and ok markus@
OpenBSD-Commit-ID: d498f3eaf28128484826a4fcb343612764927935
Move list of available certificate options in ssh-keygen.1 to the
CERTIFICATES section.
Collect options specified by -O but delay parsing/validation of
certificate options until we're sure that we're acting as a CA.
ok markus@
OpenBSD-Commit-ID: 33e6bcc29cfca43606f6fa09bd84b955ee3a4106
The ssh-sk-helper client API gives us a nice place to disable
security key support when it is wasn't enabled at compile time,
so we don't need to check everywere.
Also, verification of security key signatures can remain enabled
all the time - it has no additional dependencies. So sshd can
accept security key pubkeys in authorized_keys, etc regardless of
the host's support for dlopen, etc.
security key keypair to request one that does not require a touch for each
authentication attempt. The default remains to require touch.
feedback deraadt; ok markus@
OpenBSD-Commit-ID: 887e7084b2e89c0c62d1598ac378aad8e434bcbd
a similar extension for certificates. This option disables the default
requirement that security key signatures attest that the user touched their
key to authorize them.
feedback deraadt, ok markus
OpenBSD-Commit-ID: f1fb56151ba68d55d554d0f6d3d4dba0cf1a452e
This is populated during signature verification with additional fields
that are present in and covered by the signature. At the moment, it is
only used to record security key-specific options, especially the flags
field.
with and ok markus@
OpenBSD-Commit-ID: 338a1f0e04904008836130bedb9ece4faafd4e49
linking against the (previously external) USB HID middleware. The dlopen()
capability still exists for alternate middlewares, e.g. for Bluetooth, NFC
and test/debugging.
OpenBSD-Commit-ID: 14446cf170ac0351f0d4792ba0bca53024930069
order to perform a signature operation. Notify the user when this is expected
via the TTY (if available) or $SSH_ASKPASS if we can.
ok markus@
OpenBSD-Commit-ID: 0ef90a99a85d4a2a07217a58efb4df8444818609
Mention the new key types, the ~/.ssh/id_ecdsa_sk file, ssh's
SecurityKeyProvider keyword, the SSH_SK_PROVIDER environment variable,
and ssh-keygen's new -w and -x options.
Copy the ssh-sk-helper man page from ssh-pkcs11-helper with minimal
substitutions.
ok djm@
OpenBSD-Commit-ID: ef2e8f83d0c0ce11ad9b8c28945747e5ca337ac4
including the new U2F signatures.
Don't use sshsk_ecdsa_sign() directly, instead make it reachable via
sshkey_sign() like all other signature operations. This means that
we need to add a provider argument to sshkey_sign(), so most of this
change is mechanically adding that.
Suggested by / ok markus@
OpenBSD-Commit-ID: d5193a03fcfa895085d91b2b83d984a9fde76c8c
that a signature came from a trusted signer. To discourage accidental or
unintentional use, this is invoked by the deliberately ugly option name
"check-novalidate"
from Sebastian Kinne
OpenBSD-Commit-ID: cea42c36ab7d6b70890e2d8635c1b5b943adcc0b
for OpenSSH
This adds a simple manual signature scheme to OpenSSH.
Signatures can be made and verified using ssh-keygen -Y sign|verify
Signatures embed the key used to make them. At verification time, this
is matched via principal name against an authorized_keys-like list
of allowed signers.
Mostly by Sebastian Kinne w/ some tweaks by me
ok markus@
OpenBSD-Commit-ID: 2ab568e7114c933346616392579d72be65a4b8fb
the size restrictions and apply the default size only to the matching key
type. tweak and ok dtucker@
OpenBSD-Commit-ID: b825de92d79cc4cba19b298c61e99909488ff57e
functionality there (wrapping of base64-encoded data) to sshbuf functions;
feedback and ok markus@
OpenBSD-Commit-ID: 4dba6735d88c57232f6fccec8a08bdcfea44ac4c
private keys, enabled via "ssh-keygen -m PKCS8" on operations that save
private keys to disk.
The OpenSSH native key format remains the default, but PKCS8 is a
superior format to PEM if interoperability with non-OpenSSH software
is required, as it may use a less terrible KDF (IIRC PEM uses a single
round of MD5 as a KDF).
adapted from patch by Jakub Jelen via bz3013; ok markus
OpenBSD-Commit-ID: 027824e3bc0b1c243dc5188504526d73a55accb1
sftp-server use ahead of OpenBSD's realpath changing to match POSIX;
ok deraadt@ (thanks for snaps testing)
OpenBSD-Commit-ID: 4f8cbf7ed8679f6237264301d104ecec64885d55
some arbitrary value < 0. errno is only updated in this case. Change all
(most?) callers of syscalls to follow this better, and let's see if this
strictness helps us in the future.
OpenBSD-Commit-ID: 48081f00db7518e3b712a49dca06efc2a5428075
speculation and memory sidechannel attacks like Spectre, Meltdown, Rowhammer
and Rambleed. This change encrypts private keys when they are not in use with
a symmetic key that is derived from a relatively large "prekey" consisting of
random data (currently 16KB).
Attackers must recover the entire prekey with high accuracy before
they can attempt to decrypt the shielded private key, but the current
generation of attacks have bit error rates that, when applied
cumulatively to the entire prekey, make this unlikely.
Implementation-wise, keys are encrypted "shielded" when loaded and then
automatically and transparently unshielded when used for signatures or
when being saved/serialised.
Hopefully we can remove this in a few years time when computer
architecture has become less unsafe.
been in snaps for a bit already; thanks deraadt@
ok dtucker@ deraadt@
OpenBSD-Commit-ID: 19767213c312e46f94b303a512ef8e9218a39bd4
malloc_options. Prepares for changes in the way malloc is initialized. ok
guenther@ dtucker@
OpenBSD-Commit-ID: 154f4e3e174f614b09f792d4d06575e08de58a6b
changing a key pair's comments (using -c and -C) more applicable to both
methods. ok and suggestions djm@ dtucker@
OpenBSD-Commit-ID: b379338118109eb36e14a65bc0a12735205b3de6
the estimates from NIST Special Publication 800-57, 3k bits provides security
equivalent to 128 bits which is the smallest symmetric cipher we enable by
default. ok markus@ deraadt@
OpenBSD-Commit-ID: 461dd32ebe808f88f4fc3ec74749b0e6bef2276b
Don't call OpenSSL_add_all_algorithms() unless OpenSSL actually
supports it.
Move all libcrypto initialisation to a single function, and call that
from seed_rng() that is called early in each tool's main().
Prompted by patch from Rosen Penev
suported by OpenSSH >= 6.5 (released January 2014), so it should be supported
by most OpenSSH versions in active use.
It is possible to convert new-format private keys to the older
format using "ssh-keygen -f /path/key -pm PEM".
ok deraadt dtucker
OpenBSD-Commit-ID: e3bd4f2509a2103bfa2f710733426af3ad6d8ab8
known_hosts entries in a single operation (ssh-keygen -HF hostname); bz2772
Report and fix from Anton Kremenetsky
OpenBSD-Commit-ID: ac10ca13eb9bb0bc50fcd42ad11c56c317437b58
Refuse to create a certificate with an unusable number of
principals; Prompted by gdestuynder via github
OpenBSD-Commit-ID: 8cfae2451e8f07810e3e2546dfdcce66984cbd29
fatal if we're unable to write all the public key; previously
we would silently ignore errors writing the comment and terminating newline.
Prompted by github PR from WillerZ; ok dtucker
OpenBSD-Commit-ID: 18fbfcfd4e8c6adbc84820039b64d70906e49831
Remove some #ifdef notyet code from OpenSSL 0.9.8 days.
These functions have never appeared in OpenSSL and are likely never to do
so.
"kill it with fire" djm@
OpenBSD-Commit-ID: fee9560e283fd836efc2631ef381658cc673d23e
pass negotiated signing algorithm though to
sshkey_verify() and check that the negotiated algorithm matches the type in
the signature (only matters for RSA SHA1/SHA2 sigs). ok markus@
OpenBSD-Commit-ID: 735fb15bf4adc060d3bee9d047a4bcaaa81b1af9
allow certificate validity intervals that specify only a
start or stop time (we already support specifying both or neither)
OpenBSD-Commit-ID: 9be486545603c003030bdb5c467d1318b46b4e42
When generating all hostkeys (ssh-keygen -A), clobber
existing keys if they exist but are zero length. zero-length keys could
previously be made if ssh-keygen failed part way through generating them, so
avoid that case too. bz#2561 reported by Krzysztof Cieplucha; ok dtucker@
Upstream-ID: f662201c28ab8e1f086b5d43c59cddab5ade4044
remove post-SSHv1 removal dead code from rsa.c and merge
the remaining bit that it still used into ssh-rsa.c; ok markus
Upstream-ID: ac8a048d24dcd89594b0052ea5e3404b473bfa2f
Allow ssh-keygen to use a key held in ssh-agent as a CA when
signing certificates. bz#2377 ok markus
Upstream-ID: fb42e920b592edcbb5b50465739a867c09329c8f
Refuse RSA keys <1024 bits in length. Improve reporting
for keys that do not meet this requirement. ok markus@
Upstream-ID: b385e2a7b13b1484792ee681daaf79e1e203df6c
allow ssh-keygen to include arbitrary string or flag
certificate extensions and critical options. ok markus@ dtucker@
Upstream-ID: 2cf28dd6c5489eb9fc136e0b667ac3ea10241646
ensure hostname is lower-case before hashing it;
bz#2591 reported by Griff Miller II; ok dtucker@
Upstream-ID: c3b8b93804f376bd00d859b8bcd9fc0d86b4db17
fix ssh-keygen -H accidentally corrupting known_hosts that
contained already-hashed entries. HKF_MATCH_HOST_HASHED is only set by
hostkeys_foreach() when hostname matching is in use, so we need to look for
the hash marker explicitly.
Upstream-ID: da82ad653b93e8a753580d3cf5cd448bc2520528
Sanitise escape sequences in key comments sent to printf
but preserve valid UTF-8 when the locale supports it; bz#2520 ok dtucker@
Upstream-ID: e8eed28712ba7b22d49be534237eed019875bd1e
djm@openbsd.org
Damien Miller
naddy@openbsd.org
Darren Tucker
markus@openbsd.org
jmc@openbsd.org
deraadt@openbsd.org
dtucker@openbsd.org
otto@openbsd.org
lum@openbsd.org
benno@openbsd.org
Manoj Ampalam
jsing@openbsd.org
djm@openbsd.org@openbsd.org
millert@openbsd.org
Darren Tucker