Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
Make ""Killed by signal 1" LogLevel verbose so it's not
shown at the default level. Prevents it from appearing during ssh -J and
equivalent ProxyCommand configs. bz#1906, bz#2744, feedback&ok markus@
Upstream-ID: debfaa7e859b272246c2f2633335d288d2e2ae28
When using the escape sequence &~ the code path is
client_loop() -> client_simple_escape_filter() -> process_escapes() -> fork()
and the pledge for this path lacks the proc promise and therefore aborts the
process. The solution is to just add proc the promise to this specific
pledge.
Reported by Gregoire Jadi gjadi ! omecha.info
Insight with tb@, OK jca@
Upstream-ID: 63c05e30c28209519f476023b65b0b1b0387a05b
Switch to recallocarray() for a few operations. Both
growth and shrinkage are handled safely, and there also is no need for
preallocation dances. Future changes in this area will be less error prone.
Review and one bug found by markus
Upstream-ID: 822d664d6a5a1d10eccb23acdd53578a679d5065
When updating hostkeys, accept RSA keys if
HostkeyAlgorithms contains any RSA keytype. Previously, ssh could ignore RSA
keys when any of the ssh-rsa-sha2-* methods was enabled in HostkeyAlgorithms
nit ssh-rsa (SHA1 signatures) was not. bz#2650 reported by Luis Ressel; ok
dtucker@
Upstream-ID: c5e8cfee15c42f4a05d126158a0766ea06da79d2
Fix typo in ~C error message for bad port forward
cancellation. bz#2672, from Brad Marshall via Colin Watson and Ubuntu's
bugtracker.
Upstream-ID: 0d4a7e5ead6cc59c9a44b4c1e5435ab3aada09af
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
Add missing "recvfd" pledge promise: Raf Czlonka reported
ssh coredumps when Control* keywords were set in ssh_config. This patch also
fixes similar problems with scp and sftp.
ok deraadt, looks good to millert
Upstream-ID: ca2099eade1ef3e87a79614fefa26a0297ad8a3b
refactor activation of rekeying
This makes automatic rekeying internal to the packet code (previously
the server and client loops needed to assist). In doing to it makes
application of rekey limits more accurate by accounting for packets
about to be sent as well as packets queued during rekeying events
themselves.
Based on a patch from dtucker@ which was in turn based on a patch
Aleksander Adamowski in bz#2521; ok markus@
Upstream-ID: a441227fd64f9739850ca97b4cf794202860fcd8
Avoid ugly "DISPLAY "(null)" invalid; disabling X11
forwarding" message when DISPLAY is not set. This could also result in a
crash on systems with a printf that doesn't handle NULL. OK djm@
Upstream-ID: 20ee0cfbda678a247264c20ed75362042b90b412
Zero a stack buffer with explicit_bzero() instead of
memset() when returning from client_loop() for consistency with
buffer_free()/sshbuf_free().
ok dtucker@ deraadt@ djm@
Upstream-ID: bc9975b2095339811c3b954694d7d15ea5c58f66
eliminate fallback from untrusted X11 forwarding to trusted
forwarding when the X server disables the SECURITY extension; Reported by
Thomas Hoger; ok deraadt@
Upstream-ID: f76195bd2064615a63ef9674a0e4096b0713f938
adjust pledge promises for ControlMaster: when using
"ask" or "autoask", the process will use ssh-askpass for asking confirmation.
problem found by halex@
ok halex@
Upstream-ID: 38a58b30ae3eef85051c74d3c247216ec0735f80
pledges ssh client: - mux client: which is used when
ControlMaster is in use. will end with "stdio proc tty" (proc is to
permit sending SIGWINCH to mux master on window resize)
- client loop: several levels of pledging depending of your used options
ok deraadt@
Upstream-ID: 21676155a700e51f2ce911e33538e92a2cd1d94b
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
UpdateHostKeys fixes:
I accidentally changed the format of the hostkeys@openssh.com messages
last week without changing the extension name, and this has been causing
connection failures for people who are running -current. First reported
by sthen@
s/hostkeys@openssh.com/hostkeys-00@openssh.com/
Change the name of the proof message too, and reorder it a little.
Also, UpdateHostKeys=ask is incompatible with ControlPersist (no TTY
available to read the response) so disable UpdateHostKeys if it is in
ask mode and ControlPersist is active (and document this)
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
Refactor hostkeys_foreach() and dependent code Deal with
IP addresses (i.e. CheckHostIP) Don't clobber known_hosts when nothing
changed ok markus@ as part of larger commit
Host key rotation support.
Add a hostkeys@openssh.com protocol extension (global request) for
a server to inform a client of all its available host key after
authentication has completed. The client may record the keys in
known_hosts, allowing it to upgrade to better host key algorithms
and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default on).
ok markus@
update packet.c & isolate, introduce struct ssh a) switch
packet.c to buffer api and isolate per-connection info into struct ssh b)
(de)serialization of the state is moved from monitor to packet.c c) the old
packet.c API is implemented in opacket.[ch] d) compress.c/h is removed and
integrated into packet.c with and ok djm@
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[clientloop.c serverloop.c]
bz#1818 - don't send channel success/failre replies on channels that
have sent a close already; analysis and patch from Simon Tatham;
ok markus@
djm@openbsd.org
Damien Miller
dtucker@openbsd.org
mestre@openbsd.org
deraadt@openbsd.org
markus@openbsd.org
naddy@openbsd.org
tedu@openbsd.org
tb@openbsd.org
millert@openbsd.org
jsg@openbsd.org
semarie@openbsd.org
mmcc@openbsd.org