[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
[channels.h clientloop.c nchan.c serverloop.c]
unbreak
ssh -2 localhost od /bin/ls | true
ignoring SIGPIPE by adding a new channel message (EOW) that signals
the peer that we're not interested in any data it might send.
fixes bz #85; discussion, debugging and ok djm@
[channels.c channels.h clientloop.c serverloop.c]
Try additional addresses when connecting to a port forward destination
whose DNS name resolves to more than one address. The previous behaviour
was to try the first address and give up.
Reported by stig AT venaas.com in bz#343
great feedback and ok markus@
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
[channels.c channels.h servconf.c servconf.h sshd_config.5]
Make PermitOpen take a list of permitted ports and act more like most
other keywords (ie the first match is the effective setting). This
also makes it easier to override a previously set PermitOpen. ok djm@
[channels.c channels.h servconf.c sshd_config.5]
Add PermitOpen directive to sshd_config which is equivalent to the
"permitopen" key option. Allows server admin to allow TCP port
forwarding only two specific host/port pairs. Useful when combined
with Match.
If permitopen is used in both sshd_config and a key option, both
must allow a given connection before it will be permitted.
Note that users can still use external forwarders such as netcat,
so to be those must be controlled too for the limits to be effective.
Feedback & ok djm@, man page corrections & ok jmc@.
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
[channels.c channels.h session.c]
make sure protocol messages for internal channels are ignored.
allow adjust messages for non-open channels; with and ok djm@
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
[channels.c channels.h clientloop.c serverloop.c session.c]
fix regression I introduced in 4.2: X11 forwardings initiated after
a session has exited (e.g. "(sleep 5; xterm) &") would not start.
bz #1086 reported by t8m AT centrum.cz; ok markus@ dtucker@
- djm@cvs.openbsd.org 2005/07/17 06:49:04
[channels.c channels.h session.c session.h]
Fix a number of X11 forwarding channel leaks:
1. Refuse multiple X11 forwarding requests on the same session
2. Clean up all listeners after a single_connection X11 forward, not just
the one that made the single connection
3. Destroy X11 listeners when the session owning them goes away
testing and ok dtucker@
[channels.h]
race when efd gets closed while there is still buffered data:
change CHANNEL_EFD_OUTPUT_ACTIVE()
1) c->efd must always be valid AND
2a) no EOF has been seen OR
2b) there is buffered data
report, initial fix and testing Chuck Cranor
- djm@cvs.openbsd.org 2005/06/16 03:38:36
[channels.c channels.h clientloop.c clientloop.h ssh.c]
move x11_get_proto from ssh.c to clientloop.c, to make muliplexed xfwd
easier later; ok deraadt@
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
[channels.c channels.h clientloop.c]
fix some window size change bugs for multiplexed connections: windows sizes
were not being updated if they had changed after ~^Z suspends and SIGWINCH
was not being processed unless the first connection had requested a tty;
ok markus
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
[channels.c channels.h clientloop.c serverloop.c ssh.1]
bz #756: add support for the cancel-tcpip-forward request for the server and
the client (through the ~C commandline). reported by z3p AT twistedmatrix.com;
ok markus@
[channels.c channels.h session.c session.h]
display, screen, row, col, xpixel, ypixel are u_int; markus ok
- (bal) Also fixed IPADDR_IN_DISPLAY case where display, screen, row, col,
xpixel are u_int.
[channels.c channels.h compat.c compat.h nchan.c]
don't send stderr data after EOF, accept this from older known (broken)
sshd servers only, fixes http://bugzilla.mindrot.org/show_bug.cgi?id=179
[channels.h session.c ssh.c]
increase the SSH v2 window size to 4 packets. comsumes a little
bit more memory for slow receivers but increases througput.
[channels.c channels.h ssh.c]
generic callbacks are not really used, remove and
add a callback for msg of type SSH2_MSG_CHANNEL_OPEN_CONFIRMATION
ok djm@
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
[channels.c channels.h session.c]
setup x11 listen socket for just one connect if the client requests so.
(v2 only, but the openssh client does not support this feature).
- stevesk@cvs.openbsd.org 2001/11/29 14:10:51
[channels.h channels.c session.c]
sshd X11 fake server will now listen on localhost by default:
$ echo $DISPLAY
localhost:12.0
$ netstat -an|grep 6012
tcp 0 0 127.0.0.1.6012 *.* LISTEN
tcp6 0 0 ::1.6012 *.* LISTEN
sshd_config gatewayports=yes can be used to revert back to the old
behavior. will control this with another option later. ok markus@
- stevesk@cvs.openbsd.org 2001/12/19 08:43:11
[includes.h session.c]
handle utsname.nodename case for FamilyLocal X authorization; ok markus@
- markus@cvs.openbsd.org 2001/10/10 22:18:47
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c session.h]
try to keep channels open until an exit-status message is sent.
don't kill the login shells if the shells stdin/out/err is closed.
this should now work:
ssh -2n localhost 'exec > /dev/null 2>&1; sleep 10; exit 5'; echo ?
[channels.c channels.h clientloop.c]
try to fix agent-forwarding-backconnection-bug, as seen on HPUX,
for example; with Lutz.Jaenicke@aet.TU-Cottbus.DE,
[channels.c channels.h clientloop.c nchan.c serverloop.c]
keep track of both maxfd and the size of the malloc'ed fdsets.
update maxfd if maxfd gets closed.
[channels.c channels.h clientloop.c packet.c serverloop.c]
move from channel_stop_listening to channel_free_all,
call channel_free_all before calling waitpid() in serverloop.
fixes the utmp handling; report from Lutz.Jaenicke@aet.TU-Cottbus.DE
[channels.c channels.h servconf.c servconf.h serverloop.c sshd.8]
Add options ClientAliveInterval and ClientAliveCountMax to sshd.
This gives the ability to do a "keepalive" via the encrypted channel
which can't be spoofed (unlike TCP keepalives). Useful for when you want
to use ssh connections to authenticate people for something, and know
relatively quickly when they are no longer authenticated. Disabled
by default (of course). ok markus@
[buffer.c channels.c channels.h readconf.c ssh.c]
allow the ssh client act as a SOCKS4 proxy (dynamic local
portforwarding). work by Dan Kaminsky <dankamin@cisco.com> and me.
thanks to Dan for this great patch: use 'ssh -D 1080 host' and make
netscape use localhost:1080 as a socks proxy.
[channels.c channels.h clientloop.c kex.c kex.h serverloop.c
sshconnect2.c sshd.c]
more robust rekeying
don't send channel data after rekeying is started.
[auth-options.c channels.c channels.h serverloop.c session.c]
implement "permitopen" key option, restricts -L style forwarding to
to specified host:port pairs. based on work by harlan@genua.de
[channels.c channels.h serverloop.c ssh.c]
do not disconnect if local port forwarding fails, e.g. if port is already in
use
- markus@cvs.openbsd.org 2001/02/01 14:58:09
[channels.c]
use ipaddr in channel messages, ietf-secsh wants this
- markus@cvs.openbsd.org 2001/01/31 12:26:20
[channels.c]
ssh.com-2.0.1x does not send additional info in CHANNEL_OPEN_FAILURE messages;
bug report from edmundo@rano.org
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
- (djm) OpenBSD CVS updates:
- deraadt@cvs.openbsd.org 2000/08/18 20:07:23
[ssh.c]
accept remsh as a valid name as well; roman@buildpoint.com
- deraadt@cvs.openbsd.org 2000/08/18 20:17:13
[deattack.c crc32.c packet.c]
rename crc32() to ssh_crc32() to avoid zlib name clash. do not move to
libz crc32 function yet, because it has ugly "long"'s in it;
oneill@cs.sfu.ca
- deraadt@cvs.openbsd.org 2000/08/18 20:26:08
[scp.1 scp.c]
-S prog support; tv@debian.org
- deraadt@cvs.openbsd.org 2000/08/18 20:50:07
[scp.c]
knf
- deraadt@cvs.openbsd.org 2000/08/18 20:57:33
[log-client.c]
shorten
- markus@cvs.openbsd.org 2000/08/19 12:48:11
[channels.c channels.h clientloop.c ssh.c ssh.h]
support for ~. in ssh2
- deraadt@cvs.openbsd.org 2000/08/19 15:29:40
[crc32.h]
proper prototype
- markus@cvs.openbsd.org 2000/08/19 15:34:44
[authfd.c authfd.h key.c key.h ssh-add.1 ssh-add.c ssh-agent.1]
[ssh-agent.c ssh-keygen.c sshconnect1.c sshconnect2.c Makefile]
[fingerprint.c fingerprint.h]
add SSH2/DSA support to the agent and some other DSA related cleanups.
(note that we cannot talk to ssh.com's ssh2 agents)
- markus@cvs.openbsd.org 2000/08/19 15:55:52
[channels.c channels.h clientloop.c]
more ~ support for ssh2
- markus@cvs.openbsd.org 2000/08/19 16:21:19
[clientloop.c]
oops
- millert@cvs.openbsd.org 2000/08/20 12:25:53
[session.c]
We have to stash the result of get_remote_name_or_ip() before we
close our socket or getpeername() will get EBADF and the process
will exit. Only a problem for "UseLogin yes".
- millert@cvs.openbsd.org 2000/08/20 12:30:59
[session.c]
Only check /etc/nologin if "UseLogin no" since login(1) may have its
own policy on determining who is allowed to login when /etc/nologin
is present. Also use the _PATH_NOLOGIN define.
- millert@cvs.openbsd.org 2000/08/20 12:42:43
[auth1.c auth2.c session.c ssh.c]
Add calls to setusercontext() and login_get*(). We basically call
setusercontext() in most places where previously we did a setlogin().
Add default login.conf file and put root in the "daemon" login class.
- millert@cvs.openbsd.org 2000/08/21 10:23:31
[session.c]
Fix incorrect PATH setting; noted by Markus.
<tibbs@math.uh.edu>
- (djm) OpenBSD CVS updates:
- todd@cvs.openbsd.org
[sshconnect2.c]
teach protocol v2 to count login failures properly and also enable an
explanation of why the password prompt comes up again like v1; this is NOT
crypto
- markus@cvs.openbsd.org
[readconf.c readconf.h servconf.c servconf.h session.c ssh.1 ssh.c sshd.8]
xauth_location support; pr 1234
[readconf.c sshconnect2.c]
typo, unused
[session.c]
allow use_login only for login sessions, otherwise remote commands are
execed with uid==0
[sshd.8]
document UseLogin better
[version.h]
OpenSSH 2.1.1
[auth-rsa.c]
fix match_hostname() logic for auth-rsa: deny access if we have a
negative match or no match at all
[channels.c hostfile.c match.c]
don't panic if mkdtemp fails for authfwd; jkb@yahoo-inc.com via
kris@FreeBSD.org
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
nchan.ms -\
channels.[ch] - remove broken x11 fix and document istate/ostate
ssh-agent.c - call setsid() regardless of argv[]
ssh.c - save a few lines when disabling rhosts-{rsa-}auth
Darren Tucker
Damien Miller
Ben Lindstrom
Kevin Steves