command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
The signal handlers from the original ssh1 code on which OpenSSH
is based assume unreliable signals and reinstall their handlers.
Since OpenBSD (and pretty much every current system) has reliable
signals this is not needed. In the unlikely even that -portable
is still being used on such systems we will deal with it in the
compat layer. ok deraadt@
OpenBSD-Commit-ID: f53a1015cb6908431b92116130d285d71589612c
Drop compatibility hacks for some ancient SSH
implementations, including ssh.com <=2.* and OpenSSH <= 3.*.
These versions were all released in or before 2001 and predate the
final SSH RFCs. The hacks in question aren't necessary for RFC-
compliant SSH implementations.
ok markus@
OpenBSD-Commit-ID: 4be81c67db57647f907f4e881fb9341448606138
don't attempt to force hostnames that are addresses to
lowercase, but instead canonicalise them through getnameinfo/getaddrinfo to
remove ambiguities (e.g. ::0001 => ::1) before they are matched against
known_hosts; bz#2763, ok dtucker@
OpenBSD-Commit-ID: ba0863ff087e61e5c65efdbe53be3cb92c9aefa0
fix broken stdout in ControlPersist mode, introduced by me in
r1.467 and reported by Alf Schlichting
OpenBSD-Commit-ID: 3750a16e02108fc25f747e4ebcedb7123c1ef509
transfer ownership of stdout to the session channel by
dup2'ing /dev/null to fd 1. This allows propagation of remote stdout close to
the local side; reported by David Newall, ok markus@
Upstream-ID: 8d9ac18a11d89e6b0415f0cbf67b928ac67f0e79
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
make "--" before the hostname terminate command-line
option processing completely; previous behaviour would not prevent further
options appearing after the hostname (ssh has a supported options after the
hostname for >20 years, so that's too late to change).
ok deraadt@
Upstream-ID: ef5ee50571b98ad94dcdf8282204e877ec88ad89
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
fix regression in 7.4 server-sig-algs, where we were
accidentally excluding SHA2 RSA signature methods. bz#2680, patch from Nuno
Goncalves; ok dtucker@
Upstream-ID: 81ac8bfb30960447740b9b8f6a214dcf322f12e8
quote [host]:port in generated ProxyJump commandline; the
[ / ] characters can confuse some shells (e.g. zsh). Reported by Lauri
Tirkkonen via bugs@
Upstream-ID: 65cdd161460e1351c3d778e974c1c2a4fa4bc182
For ProxyJump/-J, surround host name with brackets to
allow literal IPv6 addresses. From Dick Visser; ok dtucker@
Upstream-ID: 3a5d3b0171250daf6a5235e91bce09c1d5746bf1
Turkish locales are unique in their handling of the letters 'i' and
'I' (yes, they are different letters) and OpenSSH isn't remotely
prepared to deal with that. For now, the best we can do is to force
OpenSSH to use the C/POSIX locale and try to preserve the UTF-8
encoding if possible.
ok dtucker@
make IdentityFile successfully load and use certificates that
have no corresponding bare public key. E.g. just a private id_rsa and
certificate id_rsa-cert.pub (and no id_rsa.pub).
bz#2617 ok dtucker@
Upstream-ID: c1e9699b8c0e3b63cc4189e6972e3522b6292604
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
list all supported signature algorithms in the
server-sig-algs Reported by mb AT smartftp.com in bz#2547 and (independantly)
Ron Frederick; ok markus@
Upstream-ID: ddf702d721f54646b11ef2cee6d916666cb685cd
support UTF-8 characters in ssh(1) banners using
schwarze@'s safe fmprintf printer; bz#2058
feedback schwarze@ ok dtucker@
Upstream-ID: a72ce4e3644c957643c9524eea2959e41b91eea7
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
Allow ExitOnForwardFailure and ClearAllForwardings to be
overridden when using ssh -W (but still default to yes in that case).
bz#2577, ok djm@.
Upstream-ID: 4b20c419e93ca11a861c81c284090cfabc8c54d4
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
close ControlPersist background process stderr when not
in debug mode or when logging to a file or syslog. bz#1988 ok dtucker
Upstream-ID: 4fb726f0fdcb155ad419913cea10dc4afd409d24
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
Add a function to enable security-related malloc_options.
With and ok deraadt@, something similar has been in the snaps for a while.
Upstream-ID: 43a95523b832b7f3b943d2908662191110c380ed
Disable experimental client-side roaming support. Server
side was disabled/gutted for years already, but this aspect was surprisingly
forgotten. Thanks for report from Qualys
Upstream-ID: 2328004b58f431a554d4c1bf67f5407eae3389df
eliminate fallback from untrusted X11 forwarding to trusted
forwarding when the X server disables the SECURITY extension; Reported by
Thomas Hoger; ok deraadt@
Upstream-ID: f76195bd2064615a63ef9674a0e4096b0713f938
don't try to load SSHv1 private key when compiled without
SSHv1 support. From Iain Morgan bz#2505
Upstream-ID: 8b8e7b02a448cf5e5635979df2d83028f58868a7
ban ConnectionAttempts=0, it makes no sense and would cause
ssh_connect_direct() to print an uninitialised stack variable; bz#2500
reported by dvw AT phas.ubc.ca
Upstream-ID: 32b5134c608270583a90b93a07b3feb3cbd5f7d5
Expand tildes in filenames passed to -i before checking
whether or not the identity file exists. This means that if the shell
doesn't do the expansion (eg because the option and filename were given as a
single argument) then we'll still add the key. bz#2481, ok markus@
Upstream-ID: db1757178a14ac519e9a3e1a2dbd21113cb3bfc6
better handle anchored FQDNs (e.g. 'cvs.openbsd.org.') in
hostname canonicalisation - treat them as already canonical and remove the
trailing '.' before matching ssh_config; ok markus@
Upstream-ID: f7619652e074ac3febe8363f19622aa4853b679a
markus@openbsd.org
djm@openbsd.org
dtucker@openbsd.org
djm@openbsd.org@openbsd.org
millert@openbsd.org
bluhm@openbsd.org
jmc@openbsd.org
Damien Miller
deraadt@openbsd.org
mmcc@openbsd.org