[channels.c channels.h serverloop.c ssh.c]
do not disconnect if local port forwarding fails, e.g. if port is already in
use
- markus@cvs.openbsd.org 2001/02/01 14:58:09
[channels.c]
use ipaddr in channel messages, ietf-secsh wants this
- markus@cvs.openbsd.org 2001/01/31 12:26:20
[channels.c]
ssh.com-2.0.1x does not send additional info in CHANNEL_OPEN_FAILURE messages;
bug report from edmundo@rano.org
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
- markus@cvs.openbsd.org 2000/12/28 14:25:51
[auth.h auth2.c]
count authentication failures only
- markus@cvs.openbsd.org 2000/12/28 14:25:03
[sshconnect.c]
fingerprint for MITM attacks, too.
- markus@cvs.openbsd.org 2000/12/28 12:03:57
[sshd.8 sshd.c]
document -D
- markus@cvs.openbsd.org 2000/12/27 14:19:21
[serverloop.c]
less chatty
- markus@cvs.openbsd.org 2000/12/27 12:34
[auth1.c sshconnect2.c sshd.c]
typo
- markus@cvs.openbsd.org 2000/12/27 12:30:19
[readconf.c readconf.h ssh.1 sshconnect.c]
new option: HostKeyAlias: allow the user to record the host key
under a different name. This is useful for ssh tunneling over
forwarded connections or if you run multiple sshd's on different
ports on the same machine.
- markus@cvs.openbsd.org 2000/12/27 11:51:53
[ssh.1 ssh.c]
multiple -t force pty allocation, document ORIGINAL_COMMAND
- markus@cvs.openbsd.org 2000/12/27 11:41:31
[sshd.8]
update for ssh-2
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
- markus@cvs.openbsd.org 2000/06/26 03:22:29
[authfd.c]
cleanup, less cut&paste
- markus@cvs.openbsd.org 2000/06/26 15:59:19
[servconf.c servconf.h session.c sshd.8 sshd.c]
MaxStartups: limit number of unauthenticated connections, work by
theo and me
- deraadt@cvs.openbsd.org 2000/07/05 14:18:07
[session.c]
use no_x11_forwarding_flag correctly; provos ok
- provos@cvs.openbsd.org 2000/07/05 15:35:57
[sshd.c]
typo
- aaron@cvs.openbsd.org 2000/07/05 22:06:58
[scp.1 ssh-agent.1 ssh-keygen.1 sshd.8]
Insert more missing .El directives. Our troff really should identify
these and spit out a warning.
- todd@cvs.openbsd.org 2000/07/06 21:55:04
[auth-rsa.c auth2.c ssh-keygen.c]
clean code is good code
- deraadt@cvs.openbsd.org 2000/07/07 02:14:29
[serverloop.c]
sense of port forwarding flag test was backwards
- provos@cvs.openbsd.org 2000/07/08 17:17:31
[compat.c readconf.c]
replace strtok with strsep; from David Young <dyoung@onthejob.net>
- deraadt@cvs.openbsd.org 2000/07/08 19:21:15
[auth.h]
KNF
- ho@cvs.openbsd.org 2000/07/08 19:27:33
[compat.c readconf.c]
Better conditions for strsep() ending.
- ho@cvs.openbsd.org 2000/07/10 10:27:05
[readconf.c]
Get the correct message on errors. (niels@ ok)
- ho@cvs.openbsd.org 2000/07/10 10:30:25
[cipher.c kex.c servconf.c]
strtok() --> strsep(). (niels@ ok)
- markus@cvs.openbsd.org
[session.c]
make x11-fwd work w/ localhost (xauth add host/unix:11)
[cipher.c compat.c readconf.c servconf.c]
check strtok() != NULL; ok niels@
[key.c]
fix key_read() for uuencoded keys w/o '='
[serverloop.c]
group ssh1 vs. ssh2 in serverloop
[kex.c kex.h myproposal.h sshconnect2.c sshd.c]
split kexinit/kexdh, factor out common code
[readconf.c ssh.1 ssh.c]
forwardagent defaults to no, add ssh -A
- theo@cvs.openbsd.org
[session.c]
just some line shortening
<Lutz.Jaenicke@aet.TU-Cottbus.DE>
- Use mkinstalldirs script to make directories instead of non-portable
"install -d". Suggested by Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>
[clientloop.c login.c serverloop.c ssh-agent.c ssh.h sshconnect.c sshd.c]
- pid_t
[session.c]
- remove bogus chan_read_failed. this could cause data
corruption (missing data) at end of a SSH2 session.
- [atomicio.c authfd.c scp.c serverloop.c ssh.h sshconnect.c sshd.c]
move atomicio into it's own file. wrap all socket write()s which
were doing write(sock, buf, len) != len, with atomicio() calls.
- [auth-skey.c]
fd leak
- [authfile.c]
properly name fd variable
- [channels.c]
display great hatred towards strcpy
- [pty.c pty.h sshd.c]
use openpty() if it exists (it does on BSD4_4)
- [tildexpand.c]
check for ~ expansion past MAXPATHLEN
- Modified helper.c to use new atomicio function.
- Reformat Makefile a little
- Moved RC4 routines from rc4.[ch] into helper.c
- Added autoconf code to detect /dev/ptmx (Solaris) and /dev/ptc (AIX)
- [auth-krb4.c auth-passwd.c auth-skey.c ssh.
move skey-auth from auth-passwd.c to auth-s
- [auth-rsa.c]
warn only about mismatch if key is _used_
warn about keysize-mismatch with log() not
channels.c readconf.c readconf.h ssh.c ssh.
ports are u_short
- [hostfile.c]
indent, shorter warning
- [nchan.c]
use error() for internal errors
- [packet.c]
set loglevel for SSH_MSG_DISCONNECT to log(
serverloop.c
indent
- [ssh-add.1 ssh-add.c ssh.h]
document , reasonable default
- [ssh.1]
CheckHostIP is not available for connects v
- [sshconnect.c]
typo
easier to read client code for passwd and s
turn of checkhostip for proxy connects, sin
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
- [channels.c]
make this compile, bad markus
- [log.c readconf.c servconf.c ssh.h]
bugfix: loglevels are per host in clientconfig,
factor out common log-level parsing code.
- [servconf.c]
remove unused index (-Wall)
- [ssh-agent.c]
only one 'extern char *__progname'
- [sshd.8]
document SIGHUP, -Q to synopsis
- [sshconnect.c serverloop.c sshd.c packet.c packet.h]
[channels.c clientloop.c]
SSH_CMSG_MAX_PACKET_SIZE, some clients use this, some need this, niels@
[hope this time my ISP stays alive during commit]
- [ChangeLog.Ylonen] noone needs this anymore
- [authfd.c] close-on-exec for auth-socket, ok deraadt
- [hostfile.c]
in known_hosts key lookup the entry for the bits does not need
to match, all the information is contained in n and e. This
solves the problem with buggy servers announcing the wrong
modulus length. markus and me.
- [serverloop.c]
bugfix: check for space if child has terminated, from:
iedowse@maths.tcd.ie
- [ssh-add.1 ssh-add.c ssh-keygen.1 ssh-keygen.c sshconnect.c]
[fingerprint.c fingerprint.h]
rsa key fingerprints, idea from Bjoern Groenvall <bg@sics.se>
- [ssh-agent.1] typo
- [ssh.1] add OpenSSH information to AUTHOR section. okay markus@
- [sshd.c]
force logging to stderr while loading private key file
(lost while converting to new log-levels)
Damien Miller
Ben Lindstrom
Kevin Steves