ensure hostname is lower-case before hashing it;
bz#2591 reported by Griff Miller II; ok dtucker@
Upstream-ID: c3b8b93804f376bd00d859b8bcd9fc0d86b4db17
Avoid confusing error message when attempting to use
ssh-keyscan built without SSH protocol v.1 to scan for v.1 keys; bz#2583
Upstream-ID: 5d214abd3a21337d67c6dcc5aa6f313298d0d165
add support for additional fixed DH groups from
draft-ietf-curdle-ssh-kex-sha2-03
diffie-hellman-group14-sha256 (2K group)
diffie-hellman-group16-sha512 (4K group)
diffie-hellman-group18-sha512 (8K group)
based on patch from Mark D. Baushke and Darren Tucker
ok markus@
Upstream-ID: ac00406ada4f0dfec41585ca0839f039545bc46f
Add a function to enable security-related malloc_options.
With and ok deraadt@, something similar has been in the snaps for a while.
Upstream-ID: 43a95523b832b7f3b943d2908662191110c380ed
fix keyscan output for multiple hosts/addrs on one line
when host hashing or a non standard port is in use; bz#2479 ok dtucker@
Upstream-ID: 5321dabfaeceba343da3c8a8b5754c6f4a0a307b
repeatedly):
- markus@cvs.openbsd.org 2014/03/25 09:40:03
[myproposal.h]
trimm default proposals.
This commit removes the weaker pre-SHA2 hashes, the broken ciphers
(arcfour), and the broken modes (CBC) from the default configuration
(the patch only changes the default, all the modes are still available
for the config files).
ok djm@, reminded by tedu@ & naddy@ and discussed with many
- deraadt@cvs.openbsd.org 2014/03/26 17:16:26
[myproposal.h]
The current sharing of myproposal[] between both client and server code
makes the previous diff highly unpallatable. We want to go in that
direction for the server, but not for the client. Sigh.
Brought up by naddy.
- markus@cvs.openbsd.org 2014/03/27 23:01:27
[myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
disable weak proposals in sshd, but keep them in ssh; ok djm@
[kex.c kex.h myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
use curve25519 for default key exchange (curve25519-sha256@libssh.org);
initial patch from Aris Adamantiadis; ok djm@
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
openbsd-compat/bindresvport.c openbsd-compat/getrrsetbyname.c
openbsd-compat/port-tun.c openbsd-compat/rresvport.c] Include <arpa/inet.h>
for hton* and ntoh* macros. Required on (at least) HP-UX since we define
_XOPEN_SOURCE_EXTENDED. Found by santhi.amirta at gmail com.
markus@openbsd.org
djm@openbsd.org
dtucker@openbsd.org
jmc@openbsd.org
miod@openbsd.org
Darren Tucker
Damien Miller
deraadt@openbsd.org