[auth1.c auth2.c]
auth_root_allowed() is handled by the monitor in the privsep case,
so skip this for use_privsep, ok stevesk@, fixes bugzilla #387/325
[auth.h auth2.c auth2-hostbased.c auth2-kbdint.c auth2-none.c
auth2-passwd.c auth2-pubkey.c Makefile.in]
split auth2.c into one file per method; ok provos@/deraadt@
NOTE: Merged back noticable cygwin and pam stuff. May need review to
ensure I did not miss anything.
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
[auth2.c dispatch.c dispatch.h kex.c]
a single dispatch_protocol_error() that sends a message of type 'UNIMPLEMENTED'
dispatch_range(): set handler for a ranges message types
use dispatch_protocol_ignore() for authentication requests after
successful authentication (the drafts requirement).
serverloop/clientloop now send a 'UNIMPLEMENTED' message instead of exiting.
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
do_authenticated. Call loginfailed for protocol 2 failures > MAX like
we do for protocol 1. Reports from Ralf Wenk <wera0003@fh-karlsruhe.de>,
K.Wolkersdorfer@fz-juelich.de and others
[auth2.c auth.c auth.h auth-rh-rsa.c]
*known_hosts2 is obsolete for hostbased authentication and
only used for backward compat. merge ssh1/2 hostkey check
and move it to auth.c
[auth2.c auth-rsa.c pathnames.h ssh.1 sshd.8 sshd_config
ssh-keygen.1]
merge authorized_keys2 into authorized_keys.
authorized_keys2 is used for backward compat.
(just append authorized_keys2 to authorized_keys).
pain will be over.]
- markus@cvs.openbsd.org 2001/05/31 10:30:17
[auth-options.c auth2.c channels.c channels.h clientloop.c nchan.c
packet.c serverloop.c session.c ssh.c]
undo the .c file split, just merge the header and keep the cvs
history
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
[auth2.c compat.c sshconnect2.c]
more ssh v2 hostbased-auth interop: ssh.com >= 2.1.0 works now
(however the 2.1.0 server seems to work only if debug is enabled...)
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth2.c channels.c session.c
ssh.c sshconnect.c sshconnect.h uidswap.c uidswap.h]
do gid/groups-swap in addition to uid-swap, should help if /home/group
is chmod 750 + chgrp grp /home/group/, work be deraadt and me, thanks
to olar@openwall.com is comments. we had many requests for this.
[auth-passwd.c auth.c auth.h auth1.c auth2.c servconf.c servconf.h
ssh-keygen.c sshd.8]
PermitRootLogin={yes,without-password,forced-commands-only,no}
(before this change, root could login even if PermitRootLogin==no)
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2000/12/28 14:25:51
[auth.h auth2.c]
count authentication failures only
- markus@cvs.openbsd.org 2000/12/28 14:25:03
[sshconnect.c]
fingerprint for MITM attacks, too.
- markus@cvs.openbsd.org 2000/12/28 12:03:57
[sshd.8 sshd.c]
document -D
- markus@cvs.openbsd.org 2000/12/27 14:19:21
[serverloop.c]
less chatty
- markus@cvs.openbsd.org 2000/12/27 12:34
[auth1.c sshconnect2.c sshd.c]
typo
- markus@cvs.openbsd.org 2000/12/27 12:30:19
[readconf.c readconf.h ssh.1 sshconnect.c]
new option: HostKeyAlias: allow the user to record the host key
under a different name. This is useful for ssh tunneling over
forwarded connections or if you run multiple sshd's on different
ports on the same machine.
- markus@cvs.openbsd.org 2000/12/27 11:51:53
[ssh.1 ssh.c]
multiple -t force pty allocation, document ORIGINAL_COMMAND
- markus@cvs.openbsd.org 2000/12/27 11:41:31
[sshd.8]
update for ssh-2
- (bal) More C functions defined in NeXT that are unaccessable without
defining -POSIX.
- (bal) OpenBSD CVS updates:
- markus@cvs.openbsd.org 2000/12/03 11:29:04
[compat.c]
remove fallback to SSH_BUG_HMAC now that the drafts are updated
- markus@cvs.openbsd.org 2000/12/03 11:27:55
[compat.c]
correctly match "2.1.0.pl2 SSH" etc; from pekkas@netcore.fi/bugzilla.redhat
- markus@cvs.openbsd.org 2000/12/03 11:15:03
[auth2.c compat.c compat.h sshconnect2.c]
support f-secure/ssh.com 2.0.12; ok niels@
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
Damien Miller
Darren Tucker
Ben Lindstrom
Tim Rice
Kevin Steves