[sftp-server.c sftp.1 sftp-client.h sftp.c PROTOCOL sftp-client.c]
add a protocol extension to support a hard link operation. It is
available through the "ln" command in the client. The old "ln"
behaviour of creating a symlink is available using its "-s" option
or through the preexisting "symlink" command; based on a patch from
miklos AT szeredi.hu in bz#1555; ok markus@
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
[sftp.1 sftp.c]
sftp.1: put ls -h in the right place
sftp.c: as above, plus add -p to get/put, and shorten their arg names
to keep the help usage nicely aligned
ok djm
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
[sftp-client.h sftp.1 sftp-client.c sftp.c]
recursive transfer support for get/put and on the commandline
work mostly by carlosvsilvapt@gmail.com for the Google Summer of Code
with some tweaks by me; "go for it" deraadt@
[sftp.1 sftp.c]
Swizzle options: "-P sftp_server_path" moves to "-D sftp_server_path",
add "-P port" to match scp(1). Fortunately, the -P option is only really
used by our regression scripts.
part of larger patch from carlosvsilvapt@gmail.com for his Google Summer
of Code work; ok deraadt markus
[sftp.c sftp.1]
support most of scp(1)'s commandline arguments in sftp(1), as a first
step towards making sftp(1) a drop-in replacement for scp(1).
One conflicting option (-P) has not been changed, pending further
discussion.
Patch from carlosvsilvapt@gmail.com as part of his work in the
Google Summer of Code
[sftp.1 sftp.c]
update for the synopses displayed by the 'help' command, there are a
few missing flags; add 'bye' to the output of 'help'; sorting and spacing.
jmc@ suggested replacing .Oo/.Oc with a single .Op macro.
ok jmc@
[sftp-client.c sftp-client.h sftp-server.c sftp.1 sftp.c sftp.h]
introduce sftp extension methods statvfs@openssh.com and
fstatvfs@openssh.com that implement statvfs(2)-like operations,
based on a patch from miklos AT szeredi.hu (bz#1399)
also add a "df" command to the sftp client that uses the
statvfs@openssh.com to produce a df(1)-like display of filesystem
space and inode utilisation
ok markus@
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1
ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8]
convert to new .Dd format;
(We will need to teach mdoc2man.awk to understand this too.)
[scp.1 ssh.1 ssh_config.5 sftp.1]
Document RekeyLimit. Based on patch from jan.iven at cern.ch from mindrot
#1056 with feedback from jmc, djm and markus; ok jmc@ djm@
[sftp.1]
- explain that patterns can be used as arguments in get/put/ls/etc
commands (prodded by Michael Knudsen)
- describe ls flags as a list
- other minor improvements
ok jmc, djm
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
[sftp-int.c sftp.1 sftp.c]
Tidy sftp batchmode handling, eliminate junk to stderr (bugzilla #754) and
enable use of "-b -" to accept batchfile from stdin; ok markus@
[clientloop.c clientloop.h readconf.c readconf.h scp.1 sftp.1 ssh.1]
[ssh.c ssh_config.5]
application layer keep alive (ServerAliveInterval ServerAliveCountMax)
for ssh(1), similar to the sshd(8) option; ok beck@; with help from
jmc and dtucker@
[readconf.c readconf.h scp.1 servconf.c servconf.h sftp.1 ssh.1]
[ssh_config.5 sshconnect.c sshd.c sshd_config.5]
rename keepalive to tcpkeepalive; the old name causes too much
confusion; ok djm, dtucker; with help from jmc@
[scp.1 scp.c sftp-server.8 sftp.1 sftp.c ssh.1 sshd.8]
scp and sftp: add options list and sort options. options list requested
by deraadt@
sshd: use same format as ssh
ssh: remove wrong option from list
sftp-server: Subsystem is documented in ssh_config(5), not sshd(8)
ok deraadt@ markus@
[scp.c sftp.1 sftp.c sftp-client.c sftp-int.c]
sftp progress meter support.
original diffs by Nils Nordman <nino at nforced dot com> via
markus@, merged to -current by me, djm@ ok.
[sftp.1 sftp-client.c sftp-client.h sftp-common.c sftp-common.h]
[sftp-glob.c sftp-glob.h sftp-int.c sftp-server.c]
support for short/long listings and globbing in "ls"; ok markus@
[sftp.1]
> Ic cannot have that many arguments; spotted by mouring@etoh.eviladmin.org
Last Ic on the first line should not have a space between it and the final
comma.
- djm@cvs.openbsd.org 2001/03/07 10:11:23
[sftp-client.c sftp-client.h sftp-int.c sftp-server.c sftp.1 sftp.c sftp.h]
Support for new draft (draft-ietf-secsh-filexfer-01). New symlink handling
functions and small protocol change.
- djm@cvs.openbsd.org 2001/02/07 03:55:13
[sftp-client.c]
Don't free handles before we are done with them. Based on work from
Corinna Vinschen <vinschen@redhat.com>. ok markus@
- djm@cvs.openbsd.org 2001/02/06 22:32:53
[sftp.1]
Punctuation fix from Pekka Savola <pekkas@netcore.fi>
- deraadt@cvs.openbsd.org 2001/02/07 04:07:29
[sftp.1]
pretty up significantly
- itojun@cvs.openbsd.org 2001/02/07 06:49:42
[sftp.1]
.Bl-.El mismatch. markus ok
- djm@cvs.openbsd.org 2001/02/07 06:12:30
[sftp-int.c]
Check that target is a directory before doing ls; ok markus@
- itojun@cvs.openbsd.org 2001/02/07 11:01:18
[scp.c sftp-client.c sftp-server.c]
unsigned long long -> %llu, not %qu. markus ok
- stevesk@cvs.openbsd.org 2001/02/07 11:10:39
[sftp.1 sftp-int.c]
more man page cleanup and sync of help text with man page; ok markus@
- markus@cvs.openbsd.org 2001/02/07 14:58:34
[sftp-client.c]
older servers reply with SSH2_FXP_NAME + count==0 instead of EOF
- djm@cvs.openbsd.org 2001/02/07 15:27:19
[sftp.c]
Don't forward agent and X11 in sftp. Suggestion from Roumen Petrov
<roumen.petrov@skalasoft.com>
- stevesk@cvs.openbsd.org 2001/02/07 15:36:04
[sftp-int.c]
portable; ok markus@
- stevesk@cvs.openbsd.org 2001/02/07 15:55:47
[sftp-int.c]
lowercase cmds[].c also; ok markus@
- markus@cvs.openbsd.org 2001/02/07 17:04:52
[pathnames.h sftp.c]
allow sftp over ssh protocol 1; ok djm@
- deraadt@cvs.openbsd.org 2001/02/08 07:38:55
[scp.c]
memory leak fix, and snprintf throughout
- deraadt@cvs.openbsd.org 2001/02/08 08:02:02
[sftp-int.c]
plug a memory leak
- stevesk@cvs.openbsd.org 2001/02/08 10:11:23
[session.c sftp-client.c]
%i -> %d
- stevesk@cvs.openbsd.org 2001/02/08 10:57:59
[sftp-int.c]
typo
- stevesk@cvs.openbsd.org 2001/02/08 15:28:07
[sftp-int.c pathnames.h]
_PATH_LS; ok markus@
- djm@cvs.openbsd.org 2001/02/09 04:46:25
[sftp-int.c]
Check for NULL attribs for chown, chmod & chgrp operations, only send
relevant attribs back to server; ok markus@
- (djm) Update makefile.in for _PATH_SFTP_SERVER
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
Damien Miller
Darren Tucker
Ben Lindstrom