[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
openbsd-compat/bindresvport.c openbsd-compat/getrrsetbyname.c
openbsd-compat/port-tun.c openbsd-compat/rresvport.c] Include <arpa/inet.h>
for hton* and ntoh* macros. Required on (at least) HP-UX since we define
_XOPEN_SOURCE_EXTENDED. Found by santhi.amirta at gmail com.
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c]
[gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c]
[servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c]
[ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c]
[openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c]
[openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c]
[openbsd-compat/mktemp.c openbsd-compat/port-linux.c]
[openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c]
[openbsd-compat/setproctitle.c openbsd-compat/xmmap.c]
make the portable tree compile again - sprinkle unistd.h and string.h
back in. Don't redefine __unused, as it turned out to be used in
headers on Linux, and replace its use in auth-pam.c with ARGSUSED
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c]
[clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c]
[monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c]
[ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c]
[xmalloc.c xmalloc.h]
introduce xcalloc() and xasprintf() failure-checked allocations
functions and use them throughout openssh
xcalloc is particularly important because malloc(nmemb * size) is a
dangerous idiom (subject to integer overflow) and it is time for it
to die
feedback and ok deraadt@
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
Implement the diffie-hellman-group-exchange-sha256 key exchange method
using the SHA256 code in libc (and wrapper to make it into an OpenSSL
EVP), interop tested against CVS PuTTY
NB. no portability bits committed yet
[atomicio.c atomicio.h authfd.c monitor_wrap.c msg.c scp.c sftp-client.c]
[ssh-keyscan.c sshconnect.c]
Switch atomicio to use a simpler interface; it now returns a size_t
(containing number of bytes read/written), and indicates error by
returning 0. EOF is signalled by errno==EPIPE.
Typical use now becomes:
if (atomicio(read, ..., len) != len)
err(1,"read");
ok deraadt@, cloder@, djm@
- djm@cvs.openbsd.org 2003/11/23 23:17:34
[ssh-keyscan.c]
from portable - use sysconf to detect fd limit; ok markus@
(tidy diff by adding SSH_SSFDMAX macro to defines.h)
[kex.c kexdh.c kexgex.c kex.h sshconnect2.c sshd.c ssh-keyscan.c]
split kex into client and server code, no need to link
server code into the client; ok provos@
[ssh-keyscan.c]
fix size_t -> int cast (use u_long). markus ok
- markus@cvs.openbsd.org 2001/02/07 22:43:16
[ssh-keyscan.c]
s/getline/Linebuf_getline/; from roumen.petrov@skalasoft.com
- itojun@cvs.openbsd.org 2001/02/09 9:04:59
[ssh-keyscan.c]
do not assume malloc() returns zero-filled region. found by
malloc.conf=AJ.
NEED TO BE GENERATED* =) Refer to to entry "2001/01/16 19:20:06"
for more details.
20010118
- (bal) Super Sized OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/11 22:14:20 GMT 2001 by markus
[sshd.c]
maxfd+1
- markus@cvs.openbsd.org 2001/01/13 17:59:18
[ssh-keygen.1]
small ssh-keygen manpage cleanup; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:03:07
[scp.c ssh-keygen.c sshd.c]
getopt() returns -1 not EOF; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:06:54
[ssh-keyscan.c]
use SSH_DEFAULT_PORT; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:12:47
[ssh-keyscan.c]
free() -> xfree(); fix memory leak; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:14:13
[ssh-add.c]
typo, from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2001/01/13 18:32:50
[packet.c session.c ssh.c sshconnect.c sshd.c]
split out keepalive from packet_interactive (from dale@accentre.com)
set IPTOS_LOWDELAY TCP_NODELAY IPTOS_THROUGHPUT for ssh2, too.
- markus@cvs.openbsd.org 2001/01/13 18:36:45
[packet.c packet.h]
reorder, typo
- markus@cvs.openbsd.org 2001/01/13 18:38:00
[auth-options.c]
fix comment
- markus@cvs.openbsd.org 2001/01/13 18:43:31
[session.c]
Wall
- markus@cvs.openbsd.org 2001/01/13 19:14:08
[clientloop.h clientloop.c ssh.c]
move callback to headerfile
- markus@cvs.openbsd.org 2001/01/15 21:40:10
[ssh.c]
use log() instead of stderr
- markus@cvs.openbsd.org 2001/01/15 21:43:51
[dh.c]
use error() not stderr!
- markus@cvs.openbsd.org 2001/01/15 21:45:29
[sftp-server.c]
rename must fail if newpath exists, debug off by default
- markus@cvs.openbsd.org 2001/01/15 21:46:38
[sftp-server.c]
readable long listing for sftp-server, ok deraadt@
- markus@cvs.openbsd.org 2001/01/16 19:20:06
[key.c ssh-rsa.c]
make "ssh-rsa" key format for ssh2 confirm to the ietf-drafts; from
galb@vandyke.com. note that you have to delete older ssh2-rsa keys,
since they are in the wrong format, too. they must be removed from
.ssh/authorized_keys2 and .ssh/known_hosts2, etc.
(cd; grep -v ssh-rsa .ssh/authorized_keys2 > TMP && mv TMP
.ssh/authorized_keys2) additionally, we now check that
BN_num_bits(rsa->n) >= 768.
- markus@cvs.openbsd.org 2001/01/16 20:54:27
[sftp-server.c]
remove some statics. simpler handles; idea from nisse@lysator.liu.se
- deraadt@cvs.openbsd.org 2001/01/16 23:58:08
[bufaux.c radix.c sshconnect.h sshconnect1.c]
indent
- (bal) Added bsd-strmode.[ch] since some non-OpenBSD platforms may
be missing such feature.
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
- (bal) Fixed spelling of 'authorized_keys' in ssh-copy-id.1 by Christian
Kurz <shorty@debain.org>
20001228
- (bal) SCO patch to not include <sys/queue.h> since it's unrelated
header. Patch by Tim Rice <tim@multitalents.net>
- Updated TODO w/ known HP/UX issue
- (bal) removed extra <netdb.h> noticed by Kevin Steves and removed the
bad reference to 'NeXT including it else were' on the #ifdef version.
- (bal) Typo in configure.in: entut?ent should be endut?ent. Suggested by
Takumi Yamane <yamtak@b-session.com>
- (bal) Checks for getrlimit(), sysconf(), and setdtablesize(). Patch
by Corinna Vinschen <vinschen@redhat.com>