- provos@cvs.openbsd.org 2000/07/13 16:53:22
[aux.c readconf.c servconf.c ssh.h]
allow multiple whitespace but only one '=' between tokens, bug report from
Ralf S. Engelschall <rse@engelschall.com> but different fix. okay deraadt@
- provos@cvs.openbsd.org 2000/07/13 17:14:09
[clientloop.c]
typo; todd@fries.net
- provos@cvs.openbsd.org 2000/07/13 17:19:31
[scp.c]
close can fail on AFS, report error; from Greg Hudson <ghudson@mit.edu>
- markus@cvs.openbsd.org 2000/07/14 16:59:46
[readconf.c servconf.c]
allow leading whitespace. ok niels
- djm@cvs.openbsd.org 2000/07/14 22:01:38
[ssh-keygen.c ssh.c]
Always create ~/.ssh with mode 700; ok Markus
- markus@cvs.openbsd.org 2000/06/26 03:22:29
[authfd.c]
cleanup, less cut&paste
- markus@cvs.openbsd.org 2000/06/26 15:59:19
[servconf.c servconf.h session.c sshd.8 sshd.c]
MaxStartups: limit number of unauthenticated connections, work by
theo and me
- deraadt@cvs.openbsd.org 2000/07/05 14:18:07
[session.c]
use no_x11_forwarding_flag correctly; provos ok
- provos@cvs.openbsd.org 2000/07/05 15:35:57
[sshd.c]
typo
- aaron@cvs.openbsd.org 2000/07/05 22:06:58
[scp.1 ssh-agent.1 ssh-keygen.1 sshd.8]
Insert more missing .El directives. Our troff really should identify
these and spit out a warning.
- todd@cvs.openbsd.org 2000/07/06 21:55:04
[auth-rsa.c auth2.c ssh-keygen.c]
clean code is good code
- deraadt@cvs.openbsd.org 2000/07/07 02:14:29
[serverloop.c]
sense of port forwarding flag test was backwards
- provos@cvs.openbsd.org 2000/07/08 17:17:31
[compat.c readconf.c]
replace strtok with strsep; from David Young <dyoung@onthejob.net>
- deraadt@cvs.openbsd.org 2000/07/08 19:21:15
[auth.h]
KNF
- ho@cvs.openbsd.org 2000/07/08 19:27:33
[compat.c readconf.c]
Better conditions for strsep() ending.
- ho@cvs.openbsd.org 2000/07/10 10:27:05
[readconf.c]
Get the correct message on errors. (niels@ ok)
- ho@cvs.openbsd.org 2000/07/10 10:30:25
[cipher.c kex.c servconf.c]
strtok() --> strsep(). (niels@ ok)
- (djm) Cleanup entropy collection code a little more. Split initialisation
from seeding, perform intialisation immediatly at start, be careful with
uids. Based on problem report from Jim Watt <jimw@peisj.pebio.com>
<tibbs@math.uh.edu>
- (djm) OpenBSD CVS updates:
- todd@cvs.openbsd.org
[sshconnect2.c]
teach protocol v2 to count login failures properly and also enable an
explanation of why the password prompt comes up again like v1; this is NOT
crypto
- markus@cvs.openbsd.org
[readconf.c readconf.h servconf.c servconf.h session.c ssh.1 ssh.c sshd.8]
xauth_location support; pr 1234
[readconf.c sshconnect2.c]
typo, unused
[session.c]
allow use_login only for login sessions, otherwise remote commands are
execed with uid==0
[sshd.8]
document UseLogin better
[version.h]
OpenSSH 2.1.1
[auth-rsa.c]
fix match_hostname() logic for auth-rsa: deny access if we have a
negative match or no match at all
[channels.c hostfile.c match.c]
don't panic if mkdtemp fails for authfwd; jkb@yahoo-inc.com via
kris@FreeBSD.org
- fix very rare EAGAIN/EINTR issues; based on work by djm
[packet.c]
- less debug, rm unused
[auth2.c]
- disable kerb,s/key in ssh2
[sshd.8]
- Minor tweaks and typo fixes.
[ssh-keygen.c]
- Put -d into usage and reorder. markus ok.
[ssh.h atomicio.c]
- int atomicio -> ssize_t (for alpha). ok deraadt@
[auth-rsa.c]
- delay MD5 computation until client sends response, free() early, cleanup.
[cipher.c]
- void* -> unsigned char*, ok niels@
[hostfile.c]
- remove unused variable 'len'. fix comments.
- remove unused variable
[log-client.c log-server.c]
- rename a cpp symbol, to avoid param.h collision
[packet.c]
- missing xfree()
- getsockname() requires initialized tolen; andy@guildsoftware.com
- use getpeername() in packet_connection_is_on_socket(), fixes sshd -i;
from Holger.Trapp@Informatik.TU-Chemnitz.DE
[pty.c pty.h]
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
[readconf.c]
- turn off x11-fwd for the client, too.
[rsa.c]
- PKCS#1 padding
[scp.c]
- allow '.' in usernames; from jedgar@fxp.org
[servconf.c]
- typo: ignore_user_known_hosts int->flag; naddy@mips.rhein-neckar.de
- sync with sshd_config
[ssh-keygen.c]
- enable ssh-keygen -l -f ~/.ssh/known_hosts, ok deraadt@
[ssh.1]
- Change invalid 'CHAT' loglevel to 'VERBOSE'
[ssh.c]
- suppress AAAA query host when '-4' is used; from shin@nd.net.fujitsu.co.jp
- turn off x11-fwd for the client, too.
[sshconnect.c]
- missing xfree()
- retry rresvport_af(), too. from sumikawa@ebina.hitachi.co.jp.
- read error vs. "Connection closed by remote host"
[sshd.8]
- ie. -> i.e.,
- do not link to a commercial page..
- sync with sshd_config
[sshd.c]
- no need for poll.h; from bright@wintelcom.net
- log with level log() not fatal() if peer behaves badly.
- don't panic if client behaves strange. ok deraadt@
- make no-port-forwarding for RSA keys deny both -L and -R style fwding
- delay close() of pty until the pty has been chowned back to root
- oops, fix comment, too.
- missing xfree()
- move XAUTHORITY to subdir. ok dugsong@. fixes debian bug #57907, too.
(http://cgi.debian.org/cgi-bin/bugreport.cgi?archive=no&bug=57907)
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
- create x11 cookie file
- fix pr 1113, fclose() -> pclose(), todo: remote popen()
- version 1.2.3
- Cleaned up
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
- [ssh-keygen.c]
don't create ~/.ssh only if the user wants to store the private
key there. show fingerprint instead of public-key after
keygeneration. ok niels@
- [ssh-keygen.c]
replace xstrdup+strcat with strlcat+fixed buffer, fixes OF (bad me)
exit if writing the key fails (no infinit loop)
print usage() everytime we get bad options
- [ssh-keygen.c] overflow, djm@mindrot.org
- [sshd.c] fix sigchld race; cjc5@po.cwru.edu
- [ChangeLog.Ylonen] noone needs this anymore
- [authfd.c] close-on-exec for auth-socket, ok deraadt
- [hostfile.c]
in known_hosts key lookup the entry for the bits does not need
to match, all the information is contained in n and e. This
solves the problem with buggy servers announcing the wrong
modulus length. markus and me.
- [serverloop.c]
bugfix: check for space if child has terminated, from:
iedowse@maths.tcd.ie
- [ssh-add.1 ssh-add.c ssh-keygen.1 ssh-keygen.c sshconnect.c]
[fingerprint.c fingerprint.h]
rsa key fingerprints, idea from Bjoern Groenvall <bg@sics.se>
- [ssh-agent.1] typo
- [ssh.1] add OpenSSH information to AUTHOR section. okay markus@
- [sshd.c]
force logging to stderr while loading private key file
(lost while converting to new log-levels)
- [auth-rh-rsa.c auth-rhosts.c auth-rsa.c channels.c clientloop.c]
[ssh.c ssh.h sshconnect.c sshd.c]
make all access to options via 'extern Options options'
and 'extern ServerOptions options' respectively;
options are no longer passed as arguments:
* make options handling more consistent
* remove #include "readconf.h" from ssh.h
* readconf.h is only included if necessary
- [mpaux.c] clear temp buffer
- [servconf.c] print _all_ bad options found in configfile
- Removed lots of unnecessary checks from autoconf
- Added support and autoconf test for openpty() function (Unix98 pty support)
- Fix for scp not finding ssh if not installed as /usr/bin/ssh
- Added TODO file
- Merged parts of Debian patch From Phil Hands <phil@hands.com>:
- Added ssh-askpass program
- Added ssh-askpass support to ssh-add.c
- Create symlinks for slogin on install
- Fix "distclean" target in makefile
- Added example for ssh-agent to manpage
- Added support for PAM_TEXT_INFO messages
- Disable internal /etc/nologin support if PAM enabled
- Merged latest OpenBSD CVS changes:
- [sshd.c] don't send fail-msg but disconnect if too many authentication
failures
- [sshd.c] replace assert() with error, fatal or packet_disconnect
- [sshd.c] remove unused argument. ok dugsong
- [sshd.c] typo
- [rsa.c] clear buffers used for encryption. ok: niels
- [rsa.c] replace assert() with error, fatal or packet_disconnect
- Fixed coredump after merge of OpenBSD rsa.c patch
Damien Miller