add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
sync -Q in usage() to SYNOPSIS; since it's drastically
shorter, i've reformatted the block to sync with the man (80 cols) and saved
a line;
Upstream-ID: 86e2c65c3989a0777a6258a77e589b9f6f354abd
Plug minor memory leaks when options are used more than
once. bz#2182, patch from Tiago Cunha, ok deraadt djm
Upstream-ID: 5b84d0401e27fe1614c10997010cc55933adb48e
add a debug2() right before DNS resolution; it's a place
where ssh could previously silently hang for a while. bz#2433
Upstream-ID: 52a1a3e0748db66518e7598352c427145692a6a0
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
UpdateHostKeys fixes:
I accidentally changed the format of the hostkeys@openssh.com messages
last week without changing the extension name, and this has been causing
connection failures for people who are running -current. First reported
by sthen@
s/hostkeys@openssh.com/hostkeys-00@openssh.com/
Change the name of the proof message too, and reorder it a little.
Also, UpdateHostKeys=ask is incompatible with ControlPersist (no TTY
available to read the response) so disable UpdateHostKeys if it is in
ask mode and ControlPersist is active (and document this)
when hostname canonicalisation is enabled, try to parse
hostnames as addresses before looking them up for canonicalisation. fixes
bz#2074 and avoids needless DNS lookups in some cases; ok markus
Tweak config reparsing with host canonicalisation
Make the second pass through the config files always run when
hostname canonicalisation is enabled.
Add a "Match canonical" criteria that allows ssh_config Match
blocks to trigger only in the second config pass.
Add a -G option to ssh that causes it to parse its configuration
and dump the result to stdout, similar to "sshd -T"
Allow ssh_config Port options set in the second config parse
phase to be applied (they were being ignored).
bz#2267 bz#2286; ok markus
[mux.c ssh.c]
reflect stdio-forward ("ssh -W host:port ...") failures in exit status.
previously we were always returning 0. bz#2255 reported by Brendan
Germain; ok dtucker
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[ssh.c ssh_config.5]
Add a %C escape sequence for LocalCommand and ControlPath that expands
to a unique identifer based on a has of the tuple of (local host,
remote user, hostname, port).
Helps avoid exceeding sockaddr_un's miserly pathname limits for mux
control paths.
bz#2220, based on patch from mancha1 AT zoho.com; ok markus@
[ssh.c]
don't fatal() when hostname canonicalisation fails with a
ProxyCommand in use; continue and allow the ProxyCommand to
connect anyway (e.g. to a host with a name outside the DNS
behind a bastion)
[readconf.c readconf.h ssh.c ssh_config.5]
reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes
the hostname. This allows users to write configurations that always
refer to canonical hostnames, e.g.
CanonicalizeHostname yes
CanonicalDomains int.example.org example.org
CanonicalizeFallbackLocal no
Host *.int.example.org
Compression off
Host *.example.org
User djm
ok markus@
[ssh.c]
delay lowercasing of hostname until right before hostname
canonicalisation to unbreak case-sensitive matching of ssh_config;
reported by Ike Devolder; ok markus@
[ssh.1 ssh.c]
- put -Q in the right place
- Ar was a poor choice for the arguments to -Q. i've chosen an
admittedly equally poor Cm, at least consistent with the rest
of the docs. also no need for multiple instances
- zap a now redundant Nm
- usage() sync
[Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
[chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
[dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
[ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
cipher "chacha20-poly1305@openssh.com" that combines Daniel
Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode.
Inspired by and similar to Adam Langley's proposal for TLS:
http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
but differs in layout used for the MAC calculation and the use of a
second ChaCha20 instance to separately encrypt packet lengths.
Details are in the PROTOCOL.chacha20poly1305 file.
Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
ok markus@ naddy@
[cipher.c cipher.h kex.c kex.h mac.c mac.h servconf.c ssh.c]
Output the effective values of Ciphers, MACs and KexAlgorithms when
the default has not been overridden. ok markus@
[ssh.c]
fix crash when using ProxyCommand caused by previous commit - was calling
freeaddrinfo(NULL); spotted by sthen@ and Tim Ruehsen, patch by sthen@
[ssh.c]
fix bug introduced in hostname canonicalisation commit: don't try to
resolve hostnames when a ProxyCommand is set unless the user has forced
canonicalisation; spotted by Iain Morgan
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
[ssh.c]
daemonise backgrounded (ControlPersist'ed) multiplexing master to ensure
it is fully detached from its controlling terminal. based on debugging
djm@openbsd.org
jmc@openbsd.org
dtucker@openbsd.org
millert@openbsd.org
deraadt@openbsd.org
krw@openbsd.org
Damien Miller