environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
Use strsignal in debug message instead of casting for the
benefit of portable where sig_atomic_t might not be int. "much nicer"
deraadt@
Upstream-ID: 2dac6c1e40511c700bd90664cd263ed2299dcf79
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
return failure rather than fatal() for more cases during
mux negotiations. Causes the session to fall back to a non-mux connection if
they occur. bz#2707 ok dtucker@
Upstream-ID: d2a7892f464d434e1f615334a1c9d0cdb83b29ab
The POSIX APIs that that sockaddrs all ignore the s*_len
field in the incoming socket, so userspace doesn't need to set it unless it
has its own reasons for tracking the size along with the sockaddr.
ok phessler@ deraadt@ florian@
Upstream-ID: ca6e49e2f22f2b9e81d6d924b90ecd7e422e7437
When tearing down ControlMaster connecctions, don't
pollute stderr when LogLevel=quiet. Patch from Tim Kuijsten via tech@.
Upstream-ID: d9b3a68b2a7c2f2fc7f74678e29a4618d55ceced
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
eliminate fallback from untrusted X11 forwarding to trusted
forwarding when the X server disables the SECURITY extension; Reported by
Thomas Hoger; ok deraadt@
Upstream-ID: f76195bd2064615a63ef9674a0e4096b0713f938
adjust pledge promises for ControlMaster: when using
"ask" or "autoask", the process will use ssh-askpass for asking confirmation.
problem found by halex@
ok halex@
Upstream-ID: 38a58b30ae3eef85051c74d3c247216ec0735f80
pledges ssh client: - mux client: which is used when
ControlMaster is in use. will end with "stdio proc tty" (proc is to
permit sending SIGWINCH to mux master on window resize)
- client loop: several levels of pledging depending of your used options
ok deraadt@
Upstream-ID: 21676155a700e51f2ce911e33538e92a2cd1d94b
fix some signed/unsigned integer type mismatches in
format strings; reported by Nicholas Lemonias
Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
[mux.c ssh.c]
reflect stdio-forward ("ssh -W host:port ...") failures in exit status.
previously we were always returning 0. bz#2255 reported by Brendan
Germain; ok dtucker
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[authfile.c bufaux.c buffer.h channels.c krl.c mux.c packet.c packet.h]
[ssh-keygen.c]
buffer_get_string_ptr's return should be const to remind
callers that futzing with it will futz with the actual buffer
contents
[clientloop.h clientloop.c mux.c]
No need for the mux cleanup callback to be visible so restore it to static
and call it through the detach_user function pointer. ok djm@
[clientloop.c clientloop.h mux.c]
Force a clean shutdown of ControlMaster client sessions when the ~. escape
sequence is used. This means that ~. should now work in mux clients even
if the server is no longer responding. Found by tedu, ok djm.
[mux.c]
fix memory leak of passed-in environment variables and connection
context when new session message is malformed; bz#2003 from Bert.Wesarg
AT googlemail.com
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
markus@openbsd.org
djm@openbsd.org
dtucker@openbsd.org
guenther@openbsd.org
Damien Miller
semarie@openbsd.org
deraadt@openbsd.org
Darren Tucker