Add a function to enable security-related malloc_options.
With and ok deraadt@, something similar has been in the snaps for a while.
Upstream-ID: 43a95523b832b7f3b943d2908662191110c380ed
fix some signed/unsigned integer type mismatches in
format strings; reported by Nicholas Lemonias
Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
- Fix error message: passphrase needs to be at least 5
characters, not 4. - Remove unused function argument. - Remove two
unnecessary variables.
OK djm@
Upstream-ID: 13010c05bfa8b523da1c0dc19e81dd180662bc30
When adding keys to the agent, don't ignore the comment
of keys for which the user is prompted for a passphrase.
Tweak and OK djm@
Upstream-ID: dc737c620a5a8d282cc4f66e3b9b624e9abefbec
slightly extend the passphrase prompt if running with -c
in order to give the user a chance to notice if unintentionally running
without it
wording tweak and ok djm@
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
Disables and removes dependency on OpenSSL. Many features don't
work and the set of crypto options is greatly restricted. This
will only work on system with native arc4random or /dev/urandom.
Considered highly experimental for now.
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
[ssh-add.c]
make stdout line-buffered; saves partial output getting lost when
ssh-add fatal()s part-way through (e.g. when listing keys from an
agent that supports key types that ssh-add doesn't);
bz#2234, reported by Phil Pennock
[Makefile.in auth-bsdauth.c auth-chall.c auth-options.c auth-rsa.c
[auth2-none.c auth2-pubkey.c authfile.c authfile.h cipher-3des1.c
[cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h
[digest-libc.c digest-openssl.c digest.h dns.c entropy.c hmac.h
[hostfile.c key.c key.h krl.c monitor.c packet.c rsa.c rsa.h
[ssh-add.c ssh-agent.c ssh-dss.c ssh-ecdsa.c ssh-ed25519.c
[ssh-keygen.c ssh-pkcs11-client.c ssh-pkcs11-helper.c ssh-pkcs11.c
[ssh-rsa.c sshbuf-misc.c sshbuf.h sshconnect.c sshconnect1.c
[sshconnect2.c sshd.c sshkey.c sshkey.h
[openbsd-compat/openssl-compat.c openbsd-compat/openssl-compat.h]
New key API: refactor key-related functions to be more library-like,
existing API is offered as a set of wrappers.
with and ok markus@
Thanks also to Ben Hawkes, David Tomaschik, Ivan Fratric, Matthew
Dempsky and Ron Bowes for a detailed review a few months ago.
NB. This commit also removes portable OpenSSH support for OpenSSL
<0.9.8e.
[ssh-add.1 ssh-add.c]
make deleting explicit keys "ssh-add -d" symmetric with adding keys -
try to delete the corresponding certificate too and respect the -k option
to allow deleting of the key only; feedback and ok markus@
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c]
[auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c]
[sshconnect.c sshconnect2.c sshd.c]
revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the
following changes:
move the nonce field to the beginning of the certificate where it can
better protect against chosen-prefix attacks on the signature hash
Rename "constraints" field to "critical options"
Add a new non-critical "extensions" field
Add a serial number
The older format is still support for authentication and cert generation
(use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate)
ok markus@
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
[authfd.c ssh-add.c authfd.h]
Do not fall back to adding keys without contraints (ssh-add -c / -t ...)
when the agent refuses the constrained add request. This was a useful
migration measure back in 2002 when constraints were new, but just
adds risk now.
bz #1612, report and patch from dkg AT fifthhorseman.net; ok markus@
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat
header to after OpenSSL headers, since some versions of OpenSSL have
SSLeay_add_all_algorithms as a macro already.
dtucker@openbsd.org
mmcc@openbsd.org
djm@openbsd.org
tim@openbsd.org
naddy@openbsd.org
markus@openbsd.org
halex@openbsd.org
deraadt@openbsd.org
Damien Miller
millert@openbsd.org
Darren Tucker