550 lines
21 KiB
Plaintext
550 lines
21 KiB
Plaintext
|
UDP-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64,
|
||
|
|
Unsigned32, IpAddress, mib-2 FROM SNMPv2-SMI
|
||
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
||
|
|
InetAddress, InetAddressType,
|
||
|
|
InetPortNumber FROM INET-ADDRESS-MIB;
|
||
|
|
|
||
|
|
udpMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200505200000Z" -- May 20, 2005
|
||
|
|
ORGANIZATION
|
||
|
|
"IETF IPv6 Working Group
|
||
|
|
http://www.ietf.org/html.charters/ipv6-charter.html"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Bill Fenner (editor)
|
||
|
|
|
||
|
|
AT&T Labs -- Research
|
||
|
|
75 Willow Rd.
|
||
|
|
Menlo Park, CA 94025
|
||
|
|
|
||
|
|
Phone: +1 650 330-7893
|
||
|
|
Email: <fenner@research.att.com>
|
||
|
|
|
||
|
|
John Flick (editor)
|
||
|
|
|
||
|
|
Hewlett-Packard Company
|
||
|
|
8000 Foothills Blvd. M/S 5557
|
||
|
|
Roseville, CA 95747
|
||
|
|
|
||
|
|
Phone: +1 916 785 4018
|
||
|
|
Email: <john.flick@hp.com>
|
||
|
|
|
||
|
|
Send comments to <ipv6@ietf.org>"
|
||
|
|
DESCRIPTION
|
||
|
|
"The MIB module for managing UDP implementations.
|
||
|
|
Copyright (C) The Internet Society (2005). This
|
||
|
|
version of this MIB module is part of RFC 4113;
|
||
|
|
see the RFC itself for full legal notices."
|
||
|
|
REVISION "200505200000Z" -- May 20, 2005
|
||
|
|
DESCRIPTION
|
||
|
|
"IP version neutral revision, incorporating the
|
||
|
|
following revisions:
|
||
|
|
|
||
|
|
- Added udpHCInDatagrams and udpHCOutDatagrams in order
|
||
|
|
to provide high-capacity counters for fast networks.
|
||
|
|
- Added text to the descriptions of all counter objects
|
||
|
|
to indicate how discontinuities are detected.
|
||
|
|
- Deprecated the IPv4-specific udpTable and replaced it
|
||
|
|
with the version neutral udpEndpointTable. This
|
||
|
|
table includes support for connected UDP endpoints
|
||
|
|
and support for identification of the operating
|
||
|
|
system process associated with a UDP endpoint.
|
||
|
|
- Deprecated the udpGroup and replaced it with object
|
||
|
|
groups representing the current set of objects.
|
||
|
|
- Deprecated udpMIBCompliance and replaced it with
|
||
|
|
udpMIBCompliance2, which includes the compliance
|
||
|
|
information for the new object groups.
|
||
|
|
|
||
|
|
This version published as RFC 4113."
|
||
|
|
REVISION "199411010000Z" -- November 1, 1994
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial SMIv2 version, published as RFC 2013."
|
||
|
|
REVISION "199103310000Z" -- March 31, 1991
|
||
|
|
DESCRIPTION
|
||
|
|
"The initial revision of this MIB module was part of
|
||
|
|
MIB-II, published as RFC 1213."
|
||
|
|
::= { mib-2 50 }
|
||
|
|
|
||
|
|
-- the UDP group
|
||
|
|
|
||
|
|
udp OBJECT IDENTIFIER ::= { mib-2 7 }
|
||
|
|
|
||
|
|
udpInDatagrams OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of UDP datagrams delivered to UDP
|
||
|
|
users.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 1 }
|
||
|
|
|
||
|
|
udpNoPorts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of received UDP datagrams for which
|
||
|
|
there was no application at the destination port.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 2 }
|
||
|
|
|
||
|
|
udpInErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of received UDP datagrams that could not be
|
||
|
|
delivered for reasons other than the lack of an
|
||
|
|
application at the destination port.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 3 }
|
||
|
|
|
||
|
|
udpOutDatagrams OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of UDP datagrams sent from this
|
||
|
|
entity.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 4 }
|
||
|
|
|
||
|
|
udpHCInDatagrams OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of UDP datagrams delivered to UDP
|
||
|
|
users, for devices that can receive more than 1
|
||
|
|
million UDP datagrams per second.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 8 }
|
||
|
|
|
||
|
|
udpHCOutDatagrams OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of UDP datagrams sent from this
|
||
|
|
entity, for devices that can transmit more than 1
|
||
|
|
million UDP datagrams per second.
|
||
|
|
|
||
|
|
Discontinuities in the value of this counter can occur
|
||
|
|
at re-initialization of the management system, and at
|
||
|
|
other times as indicated by discontinuities in the
|
||
|
|
value of sysUpTime."
|
||
|
|
::= { udp 9 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- { udp 6 } was defined as the ipv6UdpTable in RFC2454's
|
||
|
|
-- IPV6-UDP-MIB. This RFC obsoletes RFC 2454, so { udp 6 } is
|
||
|
|
-- obsoleted.
|
||
|
|
--
|
||
|
|
|
||
|
|
-- The UDP "Endpoint" table.
|
||
|
|
|
||
|
|
udpEndpointTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF UdpEndpointEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing information about this entity's UDP
|
||
|
|
endpoints on which a local application is currently
|
||
|
|
accepting or sending datagrams.
|
||
|
|
|
||
|
|
The address type in this table represents the address
|
||
|
|
type used for the communication, irrespective of the
|
||
|
|
higher-layer abstraction. For example, an application
|
||
|
|
using IPv6 'sockets' to communicate via IPv4 between
|
||
|
|
::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
|
||
|
|
InetAddressType ipv4(1).
|
||
|
|
|
||
|
|
Unlike the udpTable in RFC 2013, this table also allows
|
||
|
|
the representation of an application that completely
|
||
|
|
specifies both local and remote addresses and ports. A
|
||
|
|
listening application is represented in three possible
|
||
|
|
ways:
|
||
|
|
|
||
|
|
1) An application that is willing to accept both IPv4
|
||
|
|
and IPv6 datagrams is represented by a
|
||
|
|
udpEndpointLocalAddressType of unknown(0) and a
|
||
|
|
udpEndpointLocalAddress of ''h (a zero-length
|
||
|
|
octet-string).
|
||
|
|
|
||
|
|
2) An application that is willing to accept only IPv4
|
||
|
|
or only IPv6 datagrams is represented by a
|
||
|
|
udpEndpointLocalAddressType of the appropriate
|
||
|
|
address type and a udpEndpointLocalAddress of
|
||
|
|
'0.0.0.0' or '::' respectively.
|
||
|
|
|
||
|
|
3) An application that is listening for datagrams only
|
||
|
|
for a specific IP address but from any remote
|
||
|
|
system is represented by a
|
||
|
|
udpEndpointLocalAddressType of the appropriate
|
||
|
|
address type, with udpEndpointLocalAddress
|
||
|
|
specifying the local address.
|
||
|
|
|
||
|
|
In all cases where the remote is a wildcard, the
|
||
|
|
udpEndpointRemoteAddressType is unknown(0), the
|
||
|
|
udpEndpointRemoteAddress is ''h (a zero-length
|
||
|
|
octet-string), and the udpEndpointRemotePort is 0.
|
||
|
|
|
||
|
|
If the operating system is demultiplexing UDP packets
|
||
|
|
by remote address and port, or if the application has
|
||
|
|
'connected' the socket specifying a default remote
|
||
|
|
address and port, the udpEndpointRemote* values should
|
||
|
|
be used to reflect this."
|
||
|
|
::= { udp 7 }
|
||
|
|
|
||
|
|
udpEndpointEntry OBJECT-TYPE
|
||
|
|
SYNTAX UdpEndpointEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Information about a particular current UDP endpoint.
|
||
|
|
|
||
|
|
Implementers need to be aware that if the total number
|
||
|
|
of elements (octets or sub-identifiers) in
|
||
|
|
udpEndpointLocalAddress and udpEndpointRemoteAddress
|
||
|
|
exceeds 111, then OIDs of column instances in this table
|
||
|
|
will have more than 128 sub-identifiers and cannot be
|
||
|
|
accessed using SNMPv1, SNMPv2c, or SNMPv3."
|
||
|
|
INDEX { udpEndpointLocalAddressType,
|
||
|
|
udpEndpointLocalAddress,
|
||
|
|
udpEndpointLocalPort,
|
||
|
|
udpEndpointRemoteAddressType,
|
||
|
|
udpEndpointRemoteAddress,
|
||
|
|
udpEndpointRemotePort,
|
||
|
|
udpEndpointInstance }
|
||
|
|
::= { udpEndpointTable 1 }
|
||
|
|
|
||
|
|
UdpEndpointEntry ::= SEQUENCE {
|
||
|
|
udpEndpointLocalAddressType InetAddressType,
|
||
|
|
udpEndpointLocalAddress InetAddress,
|
||
|
|
udpEndpointLocalPort InetPortNumber,
|
||
|
|
udpEndpointRemoteAddressType InetAddressType,
|
||
|
|
udpEndpointRemoteAddress InetAddress,
|
||
|
|
udpEndpointRemotePort InetPortNumber,
|
||
|
|
udpEndpointInstance Unsigned32,
|
||
|
|
udpEndpointProcess Unsigned32
|
||
|
|
}
|
||
|
|
|
||
|
|
udpEndpointLocalAddressType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The address type of udpEndpointLocalAddress. Only
|
||
|
|
IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
|
||
|
|
unknown(0) if datagrams for all local IP addresses are
|
||
|
|
accepted."
|
||
|
|
::= { udpEndpointEntry 1 }
|
||
|
|
|
||
|
|
udpEndpointLocalAddress OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local IP address for this UDP endpoint.
|
||
|
|
|
||
|
|
The value of this object can be represented in three
|
||
|
|
|
||
|
|
possible ways, depending on the characteristics of the
|
||
|
|
listening application:
|
||
|
|
|
||
|
|
1. For an application that is willing to accept both
|
||
|
|
IPv4 and IPv6 datagrams, the value of this object
|
||
|
|
must be ''h (a zero-length octet-string), with
|
||
|
|
the value of the corresponding instance of the
|
||
|
|
udpEndpointLocalAddressType object being unknown(0).
|
||
|
|
|
||
|
|
2. For an application that is willing to accept only IPv4
|
||
|
|
or only IPv6 datagrams, the value of this object
|
||
|
|
must be '0.0.0.0' or '::', respectively, while the
|
||
|
|
corresponding instance of the
|
||
|
|
udpEndpointLocalAddressType object represents the
|
||
|
|
appropriate address type.
|
||
|
|
|
||
|
|
3. For an application that is listening for data
|
||
|
|
destined only to a specific IP address, the value
|
||
|
|
of this object is the specific IP address for which
|
||
|
|
this node is receiving packets, with the
|
||
|
|
corresponding instance of the
|
||
|
|
udpEndpointLocalAddressType object representing the
|
||
|
|
appropriate address type.
|
||
|
|
|
||
|
|
As this object is used in the index for the
|
||
|
|
udpEndpointTable, implementors of this table should be
|
||
|
|
careful not to create entries that would result in OIDs
|
||
|
|
with more than 128 subidentifiers; else the information
|
||
|
|
cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
|
||
|
|
::= { udpEndpointEntry 2 }
|
||
|
|
|
||
|
|
udpEndpointLocalPort OBJECT-TYPE
|
||
|
|
SYNTAX InetPortNumber
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local port number for this UDP endpoint."
|
||
|
|
::= { udpEndpointEntry 3 }
|
||
|
|
|
||
|
|
udpEndpointRemoteAddressType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The address type of udpEndpointRemoteAddress. Only
|
||
|
|
IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
|
||
|
|
unknown(0) if datagrams for all remote IP addresses are
|
||
|
|
accepted. Also, note that some combinations of
|
||
|
|
|
||
|
|
udpEndpointLocalAdressType and
|
||
|
|
udpEndpointRemoteAddressType are not supported. In
|
||
|
|
particular, if the value of this object is not
|
||
|
|
unknown(0), it is expected to always refer to the
|
||
|
|
same IP version as udpEndpointLocalAddressType."
|
||
|
|
::= { udpEndpointEntry 4 }
|
||
|
|
|
||
|
|
udpEndpointRemoteAddress OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote IP address for this UDP endpoint. If
|
||
|
|
datagrams from any remote system are to be accepted,
|
||
|
|
this value is ''h (a zero-length octet-string).
|
||
|
|
Otherwise, it has the type described by
|
||
|
|
udpEndpointRemoteAddressType and is the address of the
|
||
|
|
remote system from which datagrams are to be accepted
|
||
|
|
(or to which all datagrams will be sent).
|
||
|
|
|
||
|
|
As this object is used in the index for the
|
||
|
|
udpEndpointTable, implementors of this table should be
|
||
|
|
careful not to create entries that would result in OIDs
|
||
|
|
with more than 128 subidentifiers; else the information
|
||
|
|
cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3."
|
||
|
|
::= { udpEndpointEntry 5 }
|
||
|
|
|
||
|
|
udpEndpointRemotePort OBJECT-TYPE
|
||
|
|
SYNTAX InetPortNumber
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote port number for this UDP endpoint. If
|
||
|
|
datagrams from any remote system are to be accepted,
|
||
|
|
this value is zero."
|
||
|
|
::= { udpEndpointEntry 6 }
|
||
|
|
|
||
|
|
udpEndpointInstance OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..'ffffffff'h)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The instance of this tuple. This object is used to
|
||
|
|
distinguish among multiple processes 'connected' to
|
||
|
|
the same UDP endpoint. For example, on a system
|
||
|
|
implementing the BSD sockets interface, this would be
|
||
|
|
used to support the SO_REUSEADDR and SO_REUSEPORT
|
||
|
|
socket options."
|
||
|
|
::= { udpEndpointEntry 7 }
|
||
|
|
|
||
|
|
udpEndpointProcess OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The system's process ID for the process associated with
|
||
|
|
this endpoint, or zero if there is no such process.
|
||
|
|
This value is expected to be the same as
|
||
|
|
HOST-RESOURCES-MIB::hrSWRunIndex or SYSAPPL-MIB::
|
||
|
|
sysApplElmtRunIndex for some row in the appropriate
|
||
|
|
tables."
|
||
|
|
::= { udpEndpointEntry 8 }
|
||
|
|
|
||
|
|
-- The deprecated UDP Listener table
|
||
|
|
|
||
|
|
-- The deprecated UDP listener table only contains information
|
||
|
|
-- about this entity's IPv4 UDP end-points on which a local
|
||
|
|
-- application is currently accepting datagrams. It does not
|
||
|
|
-- provide more detailed connection information, or information
|
||
|
|
-- about IPv6 endpoints.
|
||
|
|
|
||
|
|
udpTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF UdpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"A table containing IPv4-specific UDP listener
|
||
|
|
information. It contains information about all local
|
||
|
|
IPv4 UDP end-points on which an application is
|
||
|
|
currently accepting datagrams. This table has been
|
||
|
|
deprecated in favor of the version neutral
|
||
|
|
udpEndpointTable."
|
||
|
|
::= { udp 5 }
|
||
|
|
|
||
|
|
udpEntry OBJECT-TYPE
|
||
|
|
SYNTAX UdpEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Information about a particular current UDP listener."
|
||
|
|
INDEX { udpLocalAddress, udpLocalPort }
|
||
|
|
::= { udpTable 1 }
|
||
|
|
|
||
|
|
UdpEntry ::= SEQUENCE {
|
||
|
|
udpLocalAddress IpAddress,
|
||
|
|
udpLocalPort Integer32
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
udpLocalAddress OBJECT-TYPE
|
||
|
|
SYNTAX IpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The local IP address for this UDP listener. In the
|
||
|
|
case of a UDP listener that is willing to accept
|
||
|
|
datagrams for any IP interface associated with the
|
||
|
|
node, the value 0.0.0.0 is used."
|
||
|
|
::= { udpEntry 1 }
|
||
|
|
|
||
|
|
udpLocalPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The local port number for this UDP listener."
|
||
|
|
::= { udpEntry 2 }
|
||
|
|
|
||
|
|
-- conformance information
|
||
|
|
|
||
|
|
udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 }
|
||
|
|
udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 }
|
||
|
|
udpMIBGroups OBJECT IDENTIFIER ::= { udpMIBConformance 2 }
|
||
|
|
|
||
|
|
-- compliance statements
|
||
|
|
|
||
|
|
udpMIBCompliance2 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for systems that implement
|
||
|
|
UDP.
|
||
|
|
|
||
|
|
There are a number of INDEX objects that cannot be
|
||
|
|
represented in the form of OBJECT clauses in SMIv2, but
|
||
|
|
for which we have the following compliance
|
||
|
|
requirements, expressed in OBJECT clause form in this
|
||
|
|
description clause:
|
||
|
|
|
||
|
|
-- OBJECT udpEndpointLocalAddressType
|
||
|
|
-- SYNTAX InetAddressType { unknown(0), ipv4(1),
|
||
|
|
-- ipv6(2), ipv4z(3),
|
||
|
|
-- ipv6z(4) }
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- Support for dns(5) is not required.
|
||
|
|
-- OBJECT udpEndpointLocalAddress
|
||
|
|
|
||
|
|
-- SYNTAX InetAddress (SIZE(0|4|8|16|20))
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- Support is only required for zero-length
|
||
|
|
-- octet-strings, and for scoped and unscoped
|
||
|
|
-- IPv4 and IPv6 addresses.
|
||
|
|
-- OBJECT udpEndpointRemoteAddressType
|
||
|
|
-- SYNTAX InetAddressType { unknown(0), ipv4(1),
|
||
|
|
-- ipv6(2), ipv4z(3),
|
||
|
|
-- ipv6z(4) }
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- Support for dns(5) is not required.
|
||
|
|
-- OBJECT udpEndpointRemoteAddress
|
||
|
|
-- SYNTAX InetAddress (SIZE(0|4|8|16|20))
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- Support is only required for zero-length
|
||
|
|
-- octet-strings, and for scoped and unscoped
|
||
|
|
-- IPv4 and IPv6 addresses.
|
||
|
|
"
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS { udpBaseGroup, udpEndpointGroup }
|
||
|
|
GROUP udpHCGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is mandatory for systems that
|
||
|
|
are capable of receiving or transmitting more than
|
||
|
|
1 million UDP datagrams per second. 1 million
|
||
|
|
datagrams per second will cause a Counter32 to
|
||
|
|
wrap in just over an hour."
|
||
|
|
::= { udpMIBCompliances 2 }
|
||
|
|
|
||
|
|
udpMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for IPv4-only systems that
|
||
|
|
implement UDP. For IP version independence, this
|
||
|
|
compliance statement is deprecated in favor of
|
||
|
|
udpMIBCompliance2. However, agents are still
|
||
|
|
encouraged to implement these objects in order to
|
||
|
|
interoperate with the deployed base of managers."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS { udpGroup }
|
||
|
|
::= { udpMIBCompliances 1 }
|
||
|
|
|
||
|
|
-- units of conformance
|
||
|
|
|
||
|
|
udpGroup OBJECT-GROUP
|
||
|
|
OBJECTS { udpInDatagrams, udpNoPorts,
|
||
|
|
udpInErrors, udpOutDatagrams,
|
||
|
|
udpLocalAddress, udpLocalPort }
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The deprecated group of objects providing for
|
||
|
|
management of UDP over IPv4."
|
||
|
|
::= { udpMIBGroups 1 }
|
||
|
|
|
||
|
|
udpBaseGroup OBJECT-GROUP
|
||
|
|
OBJECTS { udpInDatagrams, udpNoPorts, udpInErrors,
|
||
|
|
udpOutDatagrams }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The group of objects providing for counters of UDP
|
||
|
|
statistics."
|
||
|
|
::= { udpMIBGroups 2 }
|
||
|
|
|
||
|
|
udpHCGroup OBJECT-GROUP
|
||
|
|
OBJECTS { udpHCInDatagrams, udpHCOutDatagrams }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The group of objects providing for counters of high
|
||
|
|
speed UDP implementations."
|
||
|
|
::= { udpMIBGroups 3 }
|
||
|
|
|
||
|
|
udpEndpointGroup OBJECT-GROUP
|
||
|
|
OBJECTS { udpEndpointProcess }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The group of objects providing for the IP version
|
||
|
|
independent management of UDP 'endpoints'."
|
||
|
|
::= { udpMIBGroups 4 }
|
||
|
|
|
||
|
|
END
|