pandorafms/pandora_console/attachment/mibs/STATISTICS-MIB.mib

1524 lines
58 KiB
Plaintext
Raw Normal View History

2020-02-28 11:32:33 +01:00
-- HP Enterprise Switch Statistics MIB
STATISTICS-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter, IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
HpSwitchPortType, VidList
FROM HP-ICF-TC
InetAddress, InetAddressType,
InetPortNumber
FROM INET-ADDRESS-MIB
hpSwitch
FROM HP-ICF-OID;
-- Icf Switch Specific
hpSwitchStatistics OBJECT IDENTIFIER ::= { hpSwitch 9 }
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
-- in the
-- "canonical"
-- order
VlanID ::= INTEGER (1..65535)
-- ###########################################################
-- the hpSwitchStatistics Group
-- This group contains switch statistics related variables.
-- These variables keep the operational value of the variable
-- while the similar variable in the hpConfig group keep the
-- config. value which will take effect after reboot the
-- switch.
-- ###########################################################
-- The IPX Operational Table
hpSwitchIpxStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 1 }
hpSwitchIpxStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchIpxStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
operational IPX status of the virtual LAN in this
device."
::= { hpSwitchIpxStat 1 }
hpSwitchIpxStatEntry OBJECT-TYPE
SYNTAX HpSwitchIpxStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Information about the operational IPX status of a
virtual LAN in this device."
INDEX { hpSwitchIpxStatIndex }
::= { hpSwitchIpxStatTable 1 }
HpSwitchIpxStatEntry ::=
SEQUENCE {
hpSwitchIpxStatIndex VlanID,
hpSwitchIpxStatNodeAddr MacAddress,
hpSwitchIpxStatGatewayAddr MacAddress,
hpSwitchIpxStatGatewayEncap INTEGER,
hpSwitchIpxStatAdminStatus INTEGER
}
hpSwitchIpxStatIndex OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS mandatory
DESCRIPTION "An index that uniquely identifies the operational
IPX status of a virtual LAN for which this entry
contains information."
::= { hpSwitchIpxStatEntry 1 }
hpSwitchIpxStatNodeAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The current IPX node address of this virtual LAN."
::= { hpSwitchIpxStatEntry 2 }
hpSwitchIpxStatGatewayAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The current IPX node address of the gateway for
this virtual LAN."
::= { hpSwitchIpxStatEntry 3 }
hpSwitchIpxStatGatewayEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernetII(1),
ieee8022(2),
snap(3),
ieee8023Raw(4),
noGateway(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The current type of encapsulation of the gateway."
::= { hpSwitchIpxStatEntry 4 }
hpSwitchIpxStatAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The operational status of the IPX protocol entity."
::= { hpSwitchIpxStatEntry 5 }
-- The IP Operational Table
hpSwitchIpStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 2 }
hpSwitchIpStatTimepAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION "The operational status of the Time protocol."
::= { hpSwitchIpStat 1 }
hpSwitchIpStatTimepServerAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION "The current IP address of the Time server."
::= { hpSwitchIpStat 2 }
hpSwitchIpStatTimepPollInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS obsolete
DESCRIPTION "The current client poll interval of the Time server
in minute."
::= { hpSwitchIpStat 3 }
hpSwitchIpStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchIpStatEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION "A table that contains information about the current
IP status of the virtual LAN in this device."
::= { hpSwitchIpStat 4 }
hpSwitchIpStatEntry OBJECT-TYPE
SYNTAX HpSwitchIpStatEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Information about the IP status of a specific virtual
LAN in this device."
INDEX { hpSwitchIpStatIndex }
::= { hpSwitchIpStatTable 1 }
HpSwitchIpStatEntry ::=
SEQUENCE {
hpSwitchIpStatIndex VlanID,
hpSwitchIpStatAddr IpAddress,
hpSwitchIpStatMask IpAddress,
hpSwitchIpStatGatewayAddr IpAddress,
hpSwitchIpStatAdminStatus INTEGER
}
hpSwitchIpStatIndex OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS obsolete
DESCRIPTION "An index that uniquely identifies the IP status of
a virtual LAN for which this entry contains
information."
::= { hpSwitchIpStatEntry 1 }
hpSwitchIpStatAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION "The current IP address of this Virtual LAN."
::= { hpSwitchIpStatEntry 2 }
hpSwitchIpStatMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION "The current IP subnet mask of this virtual LAN."
::= { hpSwitchIpStatEntry 3 }
hpSwitchIpStatGatewayAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION "The current IP address of the gateway for this
virtual LAN."
::= { hpSwitchIpStatEntry 4 }
hpSwitchIpStatAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
bootp(3)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION "The operational status of the IP protocol for this
virtual LAN. If the value of this variable is 3, the
IP protocol entity will utilize BOOTP during
initialization."
::= { hpSwitchIpStatEntry 5 }
-- The Forwarding Database for VLAN
hpSwitchFdbInfo OBJECT IDENTIFIER ::= { hpSwitchStatistics 4 }
hpSwitchVlanFdbAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchVlanFdbAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about unicast
entries for which the VLAN has forwarding and/or
filtering information. This information is used
by the VLAN bridging function in determining how
to propagate a received frame."
::= { hpSwitchFdbInfo 1 }
hpSwitchVlanFdbAddrEntry OBJECT-TYPE
SYNTAX HpSwitchVlanFdbAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Information about a specific unicast MAC address
for which the VLAN has some forwarding and/or
filtering information."
INDEX { hpSwitchVlanFdbId, hpSwitchVlanFdbAddress }
::= { hpSwitchVlanFdbAddrTable 1 }
HpSwitchVlanFdbAddrEntry ::=
SEQUENCE {
hpSwitchVlanFdbId VlanID,
hpSwitchVlanFdbAddress MacAddress,
hpSwitchVlanFdbPort INTEGER
}
hpSwitchVlanFdbId OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS mandatory
DESCRIPTION "An index that uniquely identifies a virtual LAN
for which this entry contains information."
::= { hpSwitchVlanFdbAddrEntry 1 }
hpSwitchVlanFdbAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "A unicast MAC address for which the VLAN has
forwarding and/or filtering information."
::= { hpSwitchVlanFdbAddrEntry 2 }
hpSwitchVlanFdbPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The port number of the port on which a frame
having a source address equal to the value of
the corresponding instance of hpSwitchVlanFdbAddress
has been seen."
::= { hpSwitchVlanFdbAddrEntry 3 }
hpSwitchPortFdbAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchPortFdbAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about unicast
entries for which the port has forwarding and/or
filtering information. This information is used
by the bridging function in determining how to
propagate a received frame."
::= { hpSwitchFdbInfo 2 }
hpSwitchPortFdbAddrEntry OBJECT-TYPE
SYNTAX HpSwitchPortFdbAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Information about a specific unicast MAC address
for which the port has some forwarding and/or
filtering information."
INDEX { hpSwitchPortFdbId, hpSwitchPortFdbAddress }
::= { hpSwitchPortFdbAddrTable 1 }
HpSwitchPortFdbAddrEntry ::=
SEQUENCE {
hpSwitchPortFdbId INTEGER,
hpSwitchPortFdbAddress MacAddress,
hpSwitchPortFdbVlanId VlanID,
hpSwitchPortFdbVidList VidList
}
hpSwitchPortFdbId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table. The corresponding row in the
Interfaces Table must exist prior to the index being
used in this table."
::= { hpSwitchPortFdbAddrEntry 1 }
hpSwitchPortFdbAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "A unicast MAC address for which the port has
forwarding and/or filtering information."
::= { hpSwitchPortFdbAddrEntry 2 }
hpSwitchPortFdbVlanId OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS deprecated
DESCRIPTION "The VLAN ID to which this entry belongs.
Deprecated - hpSwitchPortFdbVidList
should be used instead."
::= { hpSwitchPortFdbAddrEntry 3 }
hpSwitchPortFdbVidList OBJECT-TYPE
SYNTAX VidList
ACCESS read-only
STATUS mandatory
DESCRIPTION "A VidList of VLAN IDs to which this entry belongs."
::= { hpSwitchPortFdbAddrEntry 4 }
hpSwitchStpStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 5 }
hpSwitchStpStatAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The operational status of the spanning tree protocol."
::= { hpSwitchStpStat 1 }
hpSwitchMiscStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 6 }
hpSwitchCpuStat OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The CPU utilization in percent(%)."
::= { hpSwitchMiscStat 1 }
-- The FDDI IP Fragmentation Statistic Group
hpSwitchFddiIpFragStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 7 }
-- The FDDI IP Fragmentation Statistic Table
hpSwitchFddiIpFragStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchFddiIpFragStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A list of IP fragmentation statistics
for the FDDI cards in the switch."
::= { hpSwitchFddiIpFragStat 1 }
hpSwitchFddiIpFragStatEntry OBJECT-TYPE
SYNTAX HpSwitchFddiIpFragStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An Fddi IP fragmentation entry which is
containing statistics for the FDDI
cards in the switch."
INDEX { hpSwitchFddiIpFragStatIndex }
::= { hpSwitchFddiIpFragStatTable 1 }
HpSwitchFddiIpFragStatEntry ::=
SEQUENCE {
hpSwitchFddiIpFragStatIndex INTEGER,
hpSwitchFddiIpFragFramesFragmented Counter,
hpSwitchFddiIpFragFramesCreated Counter,
hpSwitchFddiIpFragFrameErrors Counter
}
hpSwitchFddiIpFragStatIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "A unique value for each FDDI Card.
The value for each FDDI card must remain constant
at least from one re-initialization of the entity's
network management system to the next
re-initialization."
::= { hpSwitchFddiIpFragStatEntry 1 }
hpSwitchFddiIpFragFramesFragmented OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of FDDI Frames which get fragmented when they
are larger than Ethernet Frame size, 1518 bytes."
::= { hpSwitchFddiIpFragStatEntry 2 }
hpSwitchFddiIpFragFramesCreated OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of inbound FDDI frames which get created when
they larger than Ethernet Frame size, 1518 bytes."
::= { hpSwitchFddiIpFragStatEntry 3 }
hpSwitchFddiIpFragFrameErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "Number of large inbound FDDI frames that contains
error which preventing them from being fragmented
when they are larger than Ethernet Frame size, 1518
bytes. Or number of large frames which are dropped
because the FDDI IP fragmentation is disabled "
::= { hpSwitchFddiIpFragStatEntry 4 }
-- The FDDI System Information and Statistic Group
hpSwitchFddiSystemStat OBJECT IDENTIFIER ::= { hpSwitchStatistics 8 }
-- The FDDI System Information and Statistic Table
hpSwitchFddiSystemStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchFddiSystemStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A list of system infomations and statistics
for the FDDI cards in the switch."
::= { hpSwitchFddiSystemStat 1 }
hpSwitchFddiSystemStatEntry OBJECT-TYPE
SYNTAX HpSwitchFddiSystemStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "An Fddi system entry which is
containing statistics for the FDDI
cards in the switch."
INDEX { hpSwitchFddiSystemStatIndex }
::= { hpSwitchFddiSystemStatTable 1 }
HpSwitchFddiSystemStatEntry ::=
SEQUENCE {
hpSwitchFddiSystemStatIndex INTEGER,
hpSwitchFddiSystemOsVersion DisplayString,
hpSwitchFddiSystemRomVersion DisplayString,
hpSwitchFddiSystemMemoryTotal INTEGER,
hpSwitchFddiSystemMemoryFree INTEGER,
hpSwitchFddiSystemCpuUtil INTEGER,
hpSwitchFddiSystemBuildDirectory OCTET STRING,
hpSwitchFddiSystemBuildDate OCTET STRING,
hpSwitchFddiSystemBuildNumber OCTET STRING
}
hpSwitchFddiSystemStatIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "A unique value for each FDDI Card.
The value for each FDDI card must remain constant
at least from one re-initialization of the entity's
network management system to the next
re-initialization."
::= { hpSwitchFddiSystemStatEntry 1 }
hpSwitchFddiSystemOsVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10))
ACCESS read-only
STATUS mandatory
DESCRIPTION "Contains the operating code version number (also
known as software or firmware). For example, a
software version such as A.08.01 is described as
follows:
A the function set available in your switch
08 the common release number
01 updates to the current common release"
::= { hpSwitchFddiSystemStatEntry 2 }
hpSwitchFddiSystemRomVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..10) )
ACCESS read-only
STATUS mandatory
DESCRIPTION "Contains the ROM version number (such as A.08.01
is described as follows:
A the function set available in your router
08 the common release number
01 updates to the current common release"
::= { hpSwitchFddiSystemStatEntry 3 }
hpSwitchFddiSystemMemoryTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of currently installed bytes."
::= { hpSwitchFddiSystemStatEntry 4 }
hpSwitchFddiSystemMemoryFree OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of available (unallocated) bytes."
::= { hpSwitchFddiSystemStatEntry 5 }
hpSwitchFddiSystemCpuUtil OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The CPU utilization in percent(%)."
::= { hpSwitchFddiSystemStatEntry 6 }
hpSwitchFddiSystemBuildDirectory OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (80))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The Build directory the FDDI firmware image "
::= { hpSwitchFddiSystemStatEntry 7 }
hpSwitchFddiSystemBuildDate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (40))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The Build date and time of the FDDI firmware image"
::= { hpSwitchFddiSystemStatEntry 8 }
hpSwitchFddiSystemBuildNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The Build number of the FDDI firmware image"
::= { hpSwitchFddiSystemStatEntry 9 }
-- The Automatic Broadcast Control (ABC) Statistic Group
hpABCStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 9 }
hpABCStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpABCStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains statistic information about
Automatic Broadcast Control on any given VLAN on
the switch."
::= { hpABCStats 1 }
hpABCStatsEntry OBJECT-TYPE
SYNTAX HpABCStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with each row in the
ABC Statistics Table."
INDEX { hpABCStatsVlanIndex,hpABCStatsPortIndex }
::= { hpABCStatsTable 1 }
HpABCStatsEntry ::=
SEQUENCE {
hpABCStatsVlanIndex VlanID,
hpABCStatsPortIndex INTEGER,
hpABCStatsPortType HpSwitchPortType,
hpABCStatsArpReplies Counter,
hpABCStatsIpxReplies Counter,
hpABCStatsIpRipControl INTEGER,
hpABCStatsIpxRipSapControl INTEGER
}
hpABCStatsVlanIndex OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS mandatory
DESCRIPTION "The value which uniquely identifies configuration of
a virtual LAN for which entry contains information."
::= { hpABCStatsEntry 1 }
hpABCStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpABCStatsEntry 2 }
hpABCStatsPortType OBJECT-TYPE
SYNTAX HpSwitchPortType
ACCESS read-only
STATUS mandatory
DESCRIPTION "The type of port."
::= { hpABCStatsEntry 3 }
hpABCStatsArpReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "This counter reports the number of ARP responses sent
out by the switch (running ABC) to proxy respond for
hosts learned in the switch ARP cashe."
::= { hpABCStatsEntry 4 }
hpABCStatsIpxReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "This counter reports the number of RIP and SAP
responses sent out by the switch (running ABC) to
proxy respond for routes and services learned by
switch."
::= { hpABCStatsEntry 5 }
hpABCStatsIpRipControl OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
notforwarding(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This status field shows if IP RIP packets are being
forwarded or not forwarded on the ports shown."
::= { hpABCStatsEntry 6 }
hpABCStatsIpxRipSapControl OBJECT-TYPE
SYNTAX INTEGER {
forwarding(1),
notforwarding(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This status field shows if IPX RIP and/or IPX SAP
packets are being forwarded or not forwarded on the
ports shown."
::= { hpABCStatsEntry 7 }
-- The IGMP Statistic Group
hpIgmpStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 10 }
hpIgmpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpIgmpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains statistic information about
Multicast Groups on any given VLAN on the switch."
::= { hpIgmpStats 1 }
hpIgmpStatsEntry OBJECT-TYPE
SYNTAX HpIgmpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with each member in
particular multicast group."
INDEX { hpIgmpStatsVlanIndex, hpIgmpStatsActiveGroupAddr }
::= { hpIgmpStatsTable 1 }
HpIgmpStatsEntry ::=
SEQUENCE {
hpIgmpStatsVlanIndex VlanID,
hpIgmpStatsActiveGroupAddr IpAddress,
hpIgmpStatsReports Counter,
hpIgmpStatsQueries Counter,
hpIgmpStatsQuerierAccessPort INTEGER
}
hpIgmpStatsVlanIndex OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS mandatory
DESCRIPTION "The value which uniquely identifies configuration of
a virtual LAN for which entry contains information."
::= { hpIgmpStatsEntry 1 }
hpIgmpStatsActiveGroupAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "An IP Multicast Group Membership address that has been
sent, via IGMP Membership Reports, through the switch
to querier."
::= { hpIgmpStatsEntry 2 }
hpIgmpStatsReports OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IGMP report packets that the switch has
seen for this group address."
::= { hpIgmpStatsEntry 3 }
hpIgmpStatsQueries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IGMP query packets the switch has seen
for this group address. Note: This object is based
on a group, thus if a query is heard before this
object's group joins, the value will be zero. It will
be non-zero when an all host query, or group specific
query for the associated group, is heard after the
associated group has joined."
::= { hpIgmpStatsEntry 4 }
hpIgmpStatsQuerierAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The port on which the switch detects IGMP query
packets from the querier (device sending out query
packets). If no queries are heard, the value of the
object is zero and we are querier or electing to be
querier. Anytime a querier besides our switch is
heard the value of the object becomes the port number
on which the other querier was heard and the query
election process will be halted if currently running."
::= { hpIgmpStatsEntry 5 }
hpIgmpStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpIgmpStatsPortEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION "A table that contains information about status
of the IGMP port configurations on this switch."
::= { hpIgmpStats 2 }
hpIgmpStatsPortEntry OBJECT-TYPE
SYNTAX HpIgmpStatsPortEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION "The information associated with status of each IGMP
port configuration."
INDEX { hpIgmpStatsActiveGroupAddr, hpIgmpStatsPortIndex }
::= { hpIgmpStatsPortTable 1 }
HpIgmpStatsPortEntry ::=
SEQUENCE {
hpIgmpStatsPortIndex INTEGER,
hpIgmpStatsPortType HpSwitchPortType,
hpIgmpStatsPortAccess INTEGER
}
hpIgmpStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS deprecated
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpIgmpStatsPortEntry 1 }
hpIgmpStatsPortType OBJECT-TYPE
SYNTAX HpSwitchPortType
ACCESS read-only
STATUS deprecated
DESCRIPTION "The type of port."
::= { hpIgmpStatsPortEntry 2 }
hpIgmpStatsPortAccess OBJECT-TYPE
SYNTAX INTEGER{
host(1),
router(2),
host-router(3)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION "If this value is host then this port has seen IGMP
report packets for this active group address. If this
value is router then this port has detected IGMP query
packets from the querier (device sending out query
packets). If this value is host-router then this port
has seen report packets, and IGMP query packets from
the querier."
::= { hpIgmpStatsPortEntry 3 }
hpIgmpStatsPortTable2 OBJECT-TYPE
SYNTAX SEQUENCE OF HpIgmpStatsPortEntry2
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about status
of the IGMP port configurations on this switch.
This table2 is supersedes hpIgmpStatsPortTable for
switches which support multiple vlans per port."
::= { hpIgmpStats 3 }
hpIgmpStatsPortEntry2 OBJECT-TYPE
SYNTAX HpIgmpStatsPortEntry2
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with status of each IGMP
port configuration."
INDEX { hpIgmpStatsVlanIndex,
hpIgmpStatsActiveGroupAddr,
hpIgmpStatsPortIndex2 }
::= { hpIgmpStatsPortTable2 1 }
HpIgmpStatsPortEntry2 ::=
SEQUENCE {
hpIgmpStatsPortIndex2 INTEGER,
hpIgmpStatsPortType2 HpSwitchPortType,
hpIgmpStatsPortAccess2 INTEGER,
hpIgmpStatsPortAgeTimer2 INTEGER,
hpIgmpStatsPortLeaveTimer2 INTEGER
}
hpIgmpStatsPortIndex2 OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpIgmpStatsPortEntry2 1 }
hpIgmpStatsPortType2 OBJECT-TYPE
SYNTAX HpSwitchPortType
ACCESS read-only
STATUS mandatory
DESCRIPTION "The type of port."
::= { hpIgmpStatsPortEntry2 2 }
hpIgmpStatsPortAccess2 OBJECT-TYPE
SYNTAX INTEGER{
host(1),
router(2),
host-router(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "If this value is host then this port has seen IGMP
report packets for this active group address. If this
value is router then this port has detected IGMP query
packets from the querier (device sending out query
packets). If this value is host-router then this port
has seen report packets, and IGMP query packets from
the querier."
::= { hpIgmpStatsPortEntry2 3 }
hpIgmpStatsPortAgeTimer2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The timer is set when the switch hears a report
and is waiting for the group queries. If the timer
expires the group is considered non-active on the
specific port. The value returned shows how many
seconds left before the timer expires or 0 if the
timer has expired."
::= { hpIgmpStatsPortEntry2 4 }
hpIgmpStatsPortLeaveTimer2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The timer is set when the switch is waiting for a
report response for queries. If the timer expires the
group is considered non-active on the specific port.
The value returned shows how many seconds left before
the timer expires or 0 if the timer has expired."
::= { hpIgmpStatsPortEntry2 5 }
-- IGMP Statistic end
-- The Load Balance Protocol Statistics Group
hpLdbalStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 11 }
hpLdbalStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpLdbalStatsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
operational status of the load balancing ports on
this switch."
::= { hpLdbalStats 1 }
hpLdbalStatsPortEntry OBJECT-TYPE
SYNTAX HpLdbalStatsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with ports configured
for load balancing."
INDEX { hpLdbalStatsPortIndex }
::= { hpLdbalStatsPortTable 1 }
HpLdbalStatsPortEntry ::=
SEQUENCE {
hpLdbalStatsPortIndex INTEGER,
hpLdbalStatsPortState INTEGER,
hpLdbalStatsAdjacentSwitch MacAddress,
hpLdbalStatsPeerPort MacAddress,
hpLdbalStatsAdjacentHost DisplayString,
hpLdbalStatsMeshWarningStatus INTEGER
}
hpLdbalStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpLdbalStatsPortEntry 1 }
hpLdbalStatsPortState OBJECT-TYPE
SYNTAX INTEGER{
disabled(1),
error (2),
initial(3),
notEstablished(4),
established(5),
topologyError(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable describes the load balancing port state.
A disabled state indicates the port does not have a
link beat. An initial state indicates the port has
recently established a link beat and is detecting
whether or not it is in the load balancing domain. An
established state indicates that the port is inside
the load balancing domain, directly connected to
another load balancing port, and learning addresses
via the reception of MAC address learn information
packets. A notEstablished state indicates that the
port is outside the load balancing domain, not
directly connected to a load balancing port, and
learning MAC address by receiving unknown source
address packets. An error state indicates the port
has detected a direct connection to more than one
load balancing port and is blocked, only accepting
load balancing protocol packets. When the error
condition clears, the port transitions either into
the established or not established state."
::= { hpLdbalStatsPortEntry 2 }
hpLdbalStatsAdjacentSwitch OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The switch identifier of the adjacent switch connected
to the corresponding load balancing established port.
If load balancing has not been established on this
port then this value is void."
::= { hpLdbalStatsPortEntry 3 }
hpLdbalStatsPeerPort OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The port identifier of the peer port connected to
the corresponding load balancing established port. If
load balancing has not been established on this port
then this value is void."
::= { hpLdbalStatsPortEntry 4 }
hpLdbalStatsAdjacentHost OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The name of the adjacent Host"
::= { hpLdbalStatsPortEntry 5 }
hpLdbalStatsMeshWarningStatus OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This variable provides a high level summary of any
mismatch in the mesh configuration and remind users
to check the log for any mesh warning messages.
If it is Yes then there is at least one warning
message and will be No if there are no warning
messages"
::= { hpLdbalStatsPortEntry 6 }
-- Load Balance Protocol Statistics end
hpSwitchMacStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 12 }
hpSwitchFdbAddressCount OBJECT-TYPE
SYNTAX INTEGER (0..16384)
ACCESS read-only
STATUS mandatory
DESCRIPTION "Keep a counter for the total number of MAC
Addresses currently learnt on the box."
::= { hpSwitchMacStats 1 }
-- Flow Control Status Table
hpSwitchFlowControlStatus OBJECT IDENTIFIER ::= { hpSwitchStatistics 13 }
hpSwitchFlowControlStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchFlowControlStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
operational status of flow control on this switch."
::= { hpSwitchFlowControlStatus 1 }
hpSwitchFlowControlStatusEntry OBJECT-TYPE
SYNTAX HpSwitchFlowControlStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The flow control status per port basis."
INDEX { hpSwitchFlowControlStatusPortIndex }
::= { hpSwitchFlowControlStatusTable 1 }
HpSwitchFlowControlStatusEntry ::=
SEQUENCE {
hpSwitchFlowControlStatusPortIndex INTEGER,
hpSwitchFlowControlState INTEGER
}
hpSwitchFlowControlStatusPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpSwitchFlowControlStatusEntry 1 }
hpSwitchFlowControlState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2),
on-rx(3),
on-tx(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Gets the current Flow Control State from hardware."
::= { hpSwitchFlowControlStatusEntry 2 }
-- Fast EtherChannel Trunk Statistics Group
hpFECStatsTrunk OBJECT IDENTIFIER ::= { hpSwitchStatistics 14 }
hpFECStatsTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpFECStatsTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
operational status of flow control on this switch."
::= { hpFECStatsTrunk 1 }
hpFECStatsTrunkEntry OBJECT-TYPE
SYNTAX HpFECStatsTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The flow control status per port basis."
INDEX { hpFECStatsTrunkIndex }
::= { hpFECStatsTrunkTable 1 }
HpFECStatsTrunkEntry ::=
SEQUENCE {
hpFECStatsTrunkIndex INTEGER,
hpFECStatsTrunkName DisplayString,
hpFECStatsTrunkNegotiationStatus INTEGER,
hpFECStatsTrunkForwardingMode INTEGER,
hpFECStatsTrunkFlushPktsEchoed Counter
}
hpFECStatsTrunkIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The trunk Index value which uniquely identifies a
row in the Trunk Table."
::= { hpFECStatsTrunkEntry 1 }
hpFECStatsTrunkName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The name of the trunk group"
::= { hpFECStatsTrunkEntry 2}
hpFECStatsTrunkNegotiationStatus OBJECT-TYPE
SYNTAX INTEGER {
successful(1),
failed(2),
initialized(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Whether the trunk has been successfully negotiated"
::= { hpFECStatsTrunkEntry 3 }
hpFECStatsTrunkForwardingMode OBJECT-TYPE
SYNTAX INTEGER {
sa-only(1),
sa-da(2),
none(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Whether the trunk has been successfully negotiated"
::= { hpFECStatsTrunkEntry 4 }
hpFECStatsTrunkFlushPktsEchoed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of FEC flush packets echoed"
::= { hpFECStatsTrunkEntry 5 }
-- Fast EtherChannel Port Statistics Group
hpFECStatsPort OBJECT IDENTIFIER ::= { hpSwitchStatistics 15 }
hpFECStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpFECStatsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
operational status of flow control on this switch."
::= { hpFECStatsPort 1 }
hpFECStatsPortEntry OBJECT-TYPE
SYNTAX HpFECStatsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The flow control status per port basis."
INDEX { hpFECStatsPortIndex }
::= { hpFECStatsPortTable 1 }
HpFECStatsPortEntry ::=
SEQUENCE {
hpFECStatsPortIndex INTEGER,
hpFECStatsPortTrunkNumber INTEGER,
hpFECStatsPortTrunkName DisplayString,
hpFECStatsPortMode INTEGER,
hpFECStatsPortNegotiationStatus INTEGER,
hpFECStatsPortHellosSent Counter,
hpFECStatsPortHellosReceived Counter,
hpFECStatsPortMySlowHello INTEGER,
hpFECStatsPortMyAutoMode INTEGER,
hpFECStatsPortPartner MacAddress,
hpFECStatsPortFlushPktsEchoed Counter
}
hpFECStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpFECStatsPortEntry 1 }
hpFECStatsPortTrunkNumber OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The internal trunk ID"
::= { hpFECStatsPortEntry 2 }
hpFECStatsPortTrunkName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "The name of the trunk group"
::= { hpFECStatsPortEntry 3 }
hpFECStatsPortMode OBJECT-TYPE
SYNTAX INTEGER {
down(1),
forwarding(2),
blocking(3),
up(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "FEC port mode"
::= { hpFECStatsPortEntry 4 }
hpFECStatsPortNegotiationStatus OBJECT-TYPE
SYNTAX INTEGER {
successful(1),
failed(2),
initialized(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "FEC port negotiation state"
::= { hpFECStatsPortEntry 5 }
hpFECStatsPortHellosSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of FEC hello packets sent"
::= { hpFECStatsPortEntry 6 }
hpFECStatsPortHellosReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of FEC hello packets received"
::= { hpFECStatsPortEntry 7 }
hpFECStatsPortMySlowHello OBJECT-TYPE
SYNTAX INTEGER {
fast(1),
slow(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Currently running fast or slow FEC hello state"
::= { hpFECStatsPortEntry 8 }
hpFECStatsPortMyAutoMode OBJECT-TYPE
SYNTAX INTEGER {
desirable(1),
auto(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Silent partner mode"
::= { hpFECStatsPortEntry 9 }
hpFECStatsPortPartner OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The address of the adjacent device(switch, router,
server, etc.)"
::= { hpFECStatsPortEntry 10 }
hpFECStatsPortFlushPktsEchoed OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of FEC flush packets echoed"
::= { hpFECStatsPortEntry 11 }
hpGvrpStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 16 }
hpGvrpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGvrpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains statistic information about
GVRP on any given VLAN on the switch."
::= { hpGvrpStats 1 }
hpGvrpStatsEntry OBJECT-TYPE
SYNTAX HpGvrpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with each row in the
GVRP Statistics Table."
INDEX { hpGvrpStatsVlanIndex,hpGvrpStatsPortIndex }
::= { hpGvrpStatsTable 1 }
HpGvrpStatsEntry ::=
SEQUENCE {
hpGvrpStatsVlanIndex VlanID,
hpGvrpStatsPortIndex INTEGER,
hpGvrpStatsPortVlanMember INTEGER,
hpGvrpPortIfOperStatus INTEGER,
hpPortGvrpCtrlStatus INTEGER
}
hpGvrpStatsVlanIndex OBJECT-TYPE
SYNTAX VlanID
ACCESS read-only
STATUS mandatory
DESCRIPTION "The value which uniquely identifies configuration
of a virtual LAN for which entry contains
information."
::= { hpGvrpStatsEntry 1 }
hpGvrpStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpGvrpStatsEntry 2 }
hpGvrpStatsPortVlanMember OBJECT-TYPE
SYNTAX INTEGER {
pending(1),
yes(2),
no(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This value reflects the state of the port with
respect to its membership in a VLAN"
::= { hpGvrpStatsEntry 3 }
hpGvrpPortIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The current operational state of the interface."
::= { hpGvrpStatsEntry 4 }
hpPortGvrpCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
learn(1),
block(2),
disable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The status of Gvrp Control on this port."
::= { hpGvrpStatsEntry 5}
hpSshStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 17 }
hpSshStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSshStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains statistic information about
SSH connections on the switch."
::= { hpSshStats 1 }
hpSshStatsEntry OBJECT-TYPE
SYNTAX HpSshStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with each row in the
SSH Statistics Table."
INDEX { hpSshStatsSesIndex }
::= { hpSshStatsTable 1 }
HpSshStatsEntry ::=
SEQUENCE {
hpSshStatsSesIndex INTEGER,
hpSshStatsSesType INTEGER,
hpSshStatsSourceIpPort DisplayString,
hpSshStatsSesVersion INTEGER,
hpSshStatsSourceIpType InetAddressType,
hpSshStatsSourceIpAddress InetAddress,
hpSshStatsSourceIpPortNum InetPortNumber
}
hpSshStatsSesIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The value which uniquely identifies a row
in the SSH Statistics Table."
::= { hpSshStatsEntry 1 }
hpSshStatsSesType OBJECT-TYPE
SYNTAX INTEGER {
console(1),
telnet(2),
ssh(3),
inactive(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The type of session on the switch."
::= { hpSshStatsEntry 2 }
hpSshStatsSourceIpPort OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-only
STATUS deprecated
DESCRIPTION "Contains the information about source ip address and
port number of active SSH session (e.g. 192.168.31.114:1722).
This object has been deprecated as its not big enough to store
IPv6 addresses. It is loosely replaced by hpSshStatsSourceIpAddress
and hpSshStatsSourceIpPortNum"
::= { hpSshStatsEntry 3 }
hpSshStatsSesVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
noConnect(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Specifies the SSH protocol version in use for a
given session."
::= { hpSshStatsEntry 4 }
hpSshStatsSourceIpType OBJECT-TYPE
SYNTAX InetAddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION "Specifies the Address type of source ip
address of active SSH session."
::= { hpSshStatsEntry 5 }
hpSshStatsSourceIpAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "Specifies the source ip address of
active SSH session."
::= { hpSshStatsEntry 6 }
hpSshStatsSourceIpPortNum OBJECT-TYPE
SYNTAX InetPortNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "Specifies the source port number of
active SSH session."
::= { hpSshStatsEntry 7 }
hpSwitchPhysicalPort OBJECT IDENTIFIER ::= { hpSwitchStatistics 18 }
hpSwitchPhysicalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchPhysicalPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains information about the
physical ports of this device."
::= { hpSwitchPhysicalPort 1 }
hpSwitchPhysicalPortEntry OBJECT-TYPE
SYNTAX HpSwitchPhysicalPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Information about the physical ports of this device."
INDEX { hpSwitchPhysicalPortIndex }
::= { hpSwitchPhysicalPortTable 1 }
HpSwitchPhysicalPortEntry ::=
SEQUENCE {
hpSwitchPhysicalPortIndex INTEGER,
hpSwitchPhysicalPortType HpSwitchPortType
}
hpSwitchPhysicalPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "An index that uniquely identifies a row in the physical
port table."
::= { hpSwitchPhysicalPortEntry 1 }
hpSwitchPhysicalPortType OBJECT-TYPE
SYNTAX HpSwitchPortType
ACCESS read-only
STATUS mandatory
DESCRIPTION "The type for this port."
::= { hpSwitchPhysicalPortEntry 2 }
hpSwitchCosStats OBJECT IDENTIFIER ::= { hpSwitchStatistics 19 }
hpSwitchQueueWatchStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSwitchQueueWatchStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "A table that contains statistic information about
Egress Queue drops on the switch."
::= { hpSwitchCosStats 1 }
hpSwitchQueueWatchStatsEntry OBJECT-TYPE
SYNTAX HpSwitchQueueWatchStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The information associated with each row in the
Queue Watch Statistics Table."
INDEX { hpSwitchQueueWatchStatsPortIndex,hpSwitchQueueWatchStatsQueueIndex }
::= { hpSwitchQueueWatchStatsTable 1 }
HpSwitchQueueWatchStatsEntry ::=
SEQUENCE {
hpSwitchQueueWatchStatsPortIndex INTEGER,
hpSwitchQueueWatchStatsQueueIndex INTEGER,
hpSwitchQueueWatchStatsQueueDrops Counter
}
hpSwitchQueueWatchStatsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The ifIndex value which uniquely identifies a row
in the Interfaces Table."
::= { hpSwitchQueueWatchStatsEntry 1 }
hpSwitchQueueWatchStatsQueueIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION "The specific value which uniquely identifies a specific port queue."
::= { hpSwitchQueueWatchStatsEntry 2 }
hpSwitchQueueWatchStatsQueueDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of packets dropped for a particular egress port queue."
::= { hpSwitchQueueWatchStatsEntry 3 }
END