-- Request for Comments: Draft cisco Systems, Inc. -- cisco MIB* -- Wed Apr 8 14:37:15 1992 -- cisco Systems, Inc. -- 1525 O'Brien -- Menlo Park, CA 94025 -- customer-service@cisco.com -- 1. Introduction -- This memo describes the variables that are implemented for -- the cisco Systems, Inc. set of products including the -- Gateway Server, Terminal Server, Trouter, and Protocol -- Translator. The document relies upon the Structure of -- Management Information (SMI), RFC1155. It is presented in -- a format described in RFC1212, the Concise MIB document. -- This document describes the cisco local Management -- Information Base (MIB) variables for -- version 8.3 of the system software. -- 2. Object Definitions CISCO-MIB { iso org(3) dod(6) internet(1) private(4) enterprises(1) 9 } DEFINITIONS ::= BEGIN IMPORTS enterprises, OBJECT-TYPE, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI ifIndex, ipAdEntAddr, ipRouteDest, tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort FROM RFC1213-MIB; -- *This file is machine generated. Do not edit. -- cisco MIB [Page 1] -- -- Request for Comments: Draft cisco Systems, Inc. cisco OBJECT IDENTIFIER ::= { enterprises 9 } products OBJECT IDENTIFIER ::= { cisco 1 } local OBJECT IDENTIFIER ::= { cisco 2 } temporary OBJECT IDENTIFIER ::= { cisco 3 } gateway-server OBJECT IDENTIFIER ::= { products 1 } terminal-server OBJECT IDENTIFIER ::= { products 2 } trouter OBJECT IDENTIFIER ::= { products 3 } protocol-translator OBJECT IDENTIFIER ::= { products 4 } igs OBJECT IDENTIFIER ::= { products 5 } lsystem OBJECT IDENTIFIER ::= { local 1 } linterfaces OBJECT IDENTIFIER ::= { local 2 } lat OBJECT IDENTIFIER ::= { local 3 } lip OBJECT IDENTIFIER ::= { local 4 } licmp OBJECT IDENTIFIER ::= { local 5 } ltcp OBJECT IDENTIFIER ::= { local 6 } ludp OBJECT IDENTIFIER ::= { local 7 } legp OBJECT IDENTIFIER ::= { local 8 } lts OBJECT IDENTIFIER ::= { local 9 } decnet OBJECT IDENTIFIER ::= { temporary 1 } xns OBJECT IDENTIFIER ::= { temporary 2 } appletalk OBJECT IDENTIFIER ::= { temporary 3 } novell OBJECT IDENTIFIER ::= { temporary 4 } vines OBJECT IDENTIFIER ::= { temporary 5 } -- Product Section -- The product section contains the different product's -- object identifiers. Each product has a unique object -- identifier allocated from this section which is referenced -- by the sysObjectID variable from RFC1156. -- gateway-server OBJECT IDENTIFIER ::= { products 1 } -- terminal-server OBJECT IDENTIFIER ::= { products 2 } -- trouter OBJECT IDENTIFIER ::= { products 3 } -- protocol-translator OBJECT IDENTIFIER ::= { products 4 } -- igs OBJECT IDENTIFIER ::= { products 5 } -- New products will be added at the end of this list. -- cisco MIB [Page 2] -- -- Request for Comments: Draft cisco Systems, Inc. -- Local Variable Section -- This section describes the local variables within the cisco -- product line. Groups may or may not be present depending -- on the software options present in the managed device. -- Local System Group -- This group is present in all products. romId OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains a printable octet string which contains the System Bootstrap description and version identification." ::= { lsystem 1 } whyReload OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains a printable octet string which contains the reason why the system was last restarted." ::= { lsystem 2 } hostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the name of the host." ::= { lsystem 3 } domainName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION -- cisco MIB [Page 3] -- -- Request for Comments: Draft cisco Systems, Inc. "This variable is the domain portion of the domain name of the host." ::= { lsystem 4 } authAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the last SNMP authorization failure IP address." ::= { lsystem 5 } bootHost OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Contains the IP address of the host that supplied the currently running software." ::= { lsystem 6 } ping OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Supplies a way to ping a host from this entity. The ping variable takes the following instance identifiers: 1 - IP protocol ping. IP - address to ping. integer - count of packets to send. integer - size of ping packet. integer - timeout delay between packets." ::= { lsystem 7 } freeMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Return the amount of free memory in bytes." ::= { lsystem 8 } bufferElFree OBJECT-TYPE -- cisco MIB [Page 4] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free buffer elements." ::= { lsystem 9 } bufferElMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of buffer elements." ::= { lsystem 10 } bufferElHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element hits." ::= { lsystem 11 } bufferElMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element misses." ::= { lsystem 12 } bufferElCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of buffer element creates." ::= { lsystem 13 } bufferSmSize OBJECT-TYPE SYNTAX INTEGER -- cisco MIB [Page 5] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of small buffers." ::= { lsystem 14 } bufferSmTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of small buffers." ::= { lsystem 15 } bufferSmFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free small buffers." ::= { lsystem 16 } bufferSmMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of small buffers." ::= { lsystem 17 } bufferSmHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer hits." ::= { lsystem 18 } bufferSmMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer misses." -- cisco MIB [Page 6] -- -- Request for Comments: Draft cisco Systems, Inc. ::= { lsystem 19 } bufferSmTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer trims." ::= { lsystem 20 } bufferSmCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of small buffer creates." ::= { lsystem 21 } bufferMdSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of medium buffers." ::= { lsystem 22 } bufferMdTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of medium buffers." ::= { lsystem 23 } bufferMdFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free medium buffers." ::= { lsystem 24 } bufferMdMax OBJECT-TYPE -- cisco MIB [Page 7] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of medium buffers." ::= { lsystem 25 } bufferMdHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer hits." ::= { lsystem 26 } bufferMdMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer misses." ::= { lsystem 27 } bufferMdTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer trims." ::= { lsystem 28 } bufferMdCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of medium buffer creates." ::= { lsystem 29 } bufferBgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 8] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Contains the size of big buffers." ::= { lsystem 30 } bufferBgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of big buffers." ::= { lsystem 31 } bufferBgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free big buffers." ::= { lsystem 32 } bufferBgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of big buffers." ::= { lsystem 33 } bufferBgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer hits." ::= { lsystem 34 } bufferBgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer misses." ::= { lsystem 35 } -- cisco MIB [Page 9] -- -- Request for Comments: Draft cisco Systems, Inc. bufferBgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer trims." ::= { lsystem 36 } bufferBgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of big buffer creates." ::= { lsystem 37 } bufferLgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the size of large buffers." ::= { lsystem 38 } bufferLgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of large buffers." ::= { lsystem 39 } bufferLgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free large buffers." ::= { lsystem 40 } bufferLgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION -- cisco MIB [Page 10] -- -- Request for Comments: Draft cisco Systems, Inc. "Contains the maximum number of large buffers." ::= { lsystem 41 } bufferLgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer hits." ::= { lsystem 42 } bufferLgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer misses." ::= { lsystem 43 } bufferLgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer trims." ::= { lsystem 44 } bufferLgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of large buffer creates." ::= { lsystem 45 } bufferFail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of buffer allocation failures." ::= { lsystem 46 } -- cisco MIB [Page 11] -- -- Request for Comments: Draft cisco Systems, Inc. bufferNoMem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of the number of buffer create failures due to no free memory." ::= { lsystem 47 } netConfigIP OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Holds the IP address of the host that supplied the network-confg file." ::= { lsystem 48 } netConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Holds the name of the network configuration file." ::= { lsystem 49 } netConfigSet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Permit the loading of a new network-confg file using TFTP." ::= { lsystem 50 } hostConfigIP OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Contains the IP address of the host that provided the host-config file." ::= { lsystem 51 } -- cisco MIB [Page 12] -- -- Request for Comments: Draft cisco Systems, Inc. hostConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Contains the name of the last configured host-confg file." ::= { lsystem 52 } hostConfigSet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Permit the loading of a new host-confg file using TFTP." ::= { lsystem 53 } writeMem OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "Write configuration into non-volatile memory / erase config memory if 0" ::= { lsystem 54 } writeNet OBJECT-TYPE SYNTAX DisplayString ACCESS write-only STATUS mandatory DESCRIPTION "Write configuration to host using TFTP." ::= { lsystem 55 } busyPer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler." ::= { lsystem 56 } -- cisco MIB [Page 13] -- -- Request for Comments: Draft cisco Systems, Inc. avgBusy1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "1 minute exponentially-decayed moving average of the CPU busy percentage." ::= { lsystem 57 } avgBusy5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "5 minute exponentially-decayed moving average of the CPU busy percentage." ::= { lsystem 58 } idleCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "cisco internal variable. not to be used" ::= { lsystem 59 } idleWired OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "cisco internal variable. not to be used" ::= { lsystem 60 } ciscoContactInfo OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "cisco's name and address" ::= { lsystem 61 } bufferHgSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 14] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Contains the size of huge buffers." ::= { lsystem 62 } bufferHgTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the total number of huge buffers." ::= { lsystem 63 } bufferHgFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of free huge buffers." ::= { lsystem 64 } bufferHgMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the maximum number of huge buffers." ::= { lsystem 65 } bufferHgHit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer hits." ::= { lsystem 66 } bufferHgMiss OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer misses." ::= { lsystem 67 } -- cisco MIB [Page 15] -- -- Request for Comments: Draft cisco Systems, Inc. bufferHgTrim OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer trims." ::= { lsystem 68 } bufferHgCreate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains the number of huge buffer creates." ::= { lsystem 69 } -- Local Interface Group -- This group is present in all products. -- Local Interface Table -- This group provides additional objects to the table -- defined by RFC1156. lifTable OBJECT-TYPE SYNTAX SEQUENCE OF LIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries." ::= { linterfaces 1 } lifEntry OBJECT-TYPE SYNTAX LIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco interface." INDEX { ifIndex } ::= { lifTable 1 } -- cisco MIB [Page 16] -- -- Request for Comments: Draft cisco Systems, Inc. LIfEntry ::= SEQUENCE { locIfHardType DisplayString, locIfLineProt INTEGER, locIfLastIn INTEGER, locIfLastOut INTEGER, locIfLastOutHang INTEGER, locIfInBitsSec INTEGER, locIfInPktsSec INTEGER, locIfOutBitsSec INTEGER, locIfOutPktsSec INTEGER, locIfInRunts INTEGER, locIfInGiants INTEGER, locIfInCRC INTEGER, locIfInFrame INTEGER, locIfInOverrun INTEGER, locIfInIgnored INTEGER, locIfInAbort INTEGER, locIfResets INTEGER, locIfRestarts INTEGER, locIfKeep INTEGER, locIfReason DisplayString, locIfCarTrans INTEGER, locIfReliab -- cisco MIB [Page 17] -- -- Request for Comments: Draft cisco Systems, Inc. INTEGER, locIfDelay INTEGER, locIfLoad INTEGER, locIfCollisions INTEGER, locIfInputQueueDrops INTEGER, locIfOutputQueueDrops INTEGER } -- The following section describes the components of the -- table. locIfHardType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Returns the type of interface." ::= { lifEntry 1 } locIfLineProt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether interface line protocol is up or not." ::= { lifEntry 2 } locIfLastIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last successful line protocol input packet was received." ::= { lifEntry 3 } locIfLastOut OBJECT-TYPE -- cisco MIB [Page 18] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last successful line protocol output packet was transmitted." ::= { lifEntry 4 } locIfLastOutHang OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elapsed time in milliseconds since last line protocol output packet could not be successfully transmitted." ::= { lifEntry 5 } locIfInBitsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute average of input bits per second." ::= { lifEntry 6 } locIfInPktsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute average of input packets per second." ::= { lifEntry 7 } locIfOutBitsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute average of output bits per second." ::= { lifEntry 8 } -- cisco MIB [Page 19] -- -- Request for Comments: Draft cisco Systems, Inc. locIfOutPktsSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Five minute average of output packets per second." ::= { lifEntry 9 } locIfInRunts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets input which were smaller then the allowable physical media permitted." ::= { lifEntry 10 } locIfInGiants OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were larger then the physical media permitted." ::= { lifEntry 11 } locIfInCRC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which had cyclic redundancy checksum errors." ::= { lifEntry 12 } locIfInFrame OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packet which were misaligned." ::= { lifEntry 13 } -- cisco MIB [Page 20] -- -- Request for Comments: Draft cisco Systems, Inc. locIfInOverrun OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of input which arrived too quickly for the to hardware receive." ::= { lifEntry 14 } locIfInIgnored OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were simply ignored by this interface." ::= { lifEntry 15 } locIfInAbort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of input packets which were aborted." ::= { lifEntry 16 } locIfResets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the interface internally reset." ::= { lifEntry 17 } locIfRestarts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times interface needed to be completely restarted." ::= { lifEntry 18 } locIfKeep OBJECT-TYPE -- cisco MIB [Page 21] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether keepalives are enabled on this interface." ::= { lifEntry 19 } locIfReason OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Reason for interface last status change." ::= { lifEntry 20 } locIfCarTrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times interface saw the carrier signal transition." ::= { lifEntry 21 } locIfReliab OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The reliability of the interface. Used by IGRP." ::= { lifEntry 22 } locIfDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of delay in microseconds of the interface. Used by IGRP." ::= { lifEntry 23 } locIfLoad OBJECT-TYPE SYNTAX INTEGER -- cisco MIB [Page 22] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS read-only STATUS mandatory DESCRIPTION "The loading factor of the interface. Used by IGRP." ::= { lifEntry 24 } locIfCollisions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of output collisions detected on this interface." ::= { lifEntry 25 } locIfInputQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets dropped because the input queue was full." ::= { lifEntry 26 } locIfOutputQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets dropped because the output queue was full." ::= { lifEntry 27 } -- End of table -- Local IP Group -- This group is present in all products which are using the -- IP protocol. -- Local IP Address Table -- cisco MIB [Page 23] -- -- Request for Comments: Draft cisco Systems, Inc. -- This group provides additional objects to the table -- defined by RFC1156. lipAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF LIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP address entries." ::= { lip 1 } lipAddrEntry OBJECT-TYPE SYNTAX LIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco IP implementation." INDEX { ipAdEntAddr } ::= { lipAddrTable 1 } LIpAddrEntry ::= SEQUENCE { locIPHow DisplayString, locIPWho NetworkAddress, locIPHelper NetworkAddress, locIPSecurity INTEGER, locIPRedirects INTEGER, locIPUnreach INTEGER } -- The following section describes the components of the -- table. locIPHow OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory -- cisco MIB [Page 24] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Method of how this interface obtained its IP address." ::= { lipAddrEntry 1 } locIPWho OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of who supplied this interface its IP address." ::= { lipAddrEntry 2 } locIPHelper OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP helper address for broadcast forwarding support." ::= { lipAddrEntry 3 } locIPSecurity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "IP security level. See RFC 1038." ::= { lipAddrEntry 4 } locIPRedirects OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether ICMP redirects will be sent or not." ::= { lipAddrEntry 5 } locIPUnreach OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION -- cisco MIB [Page 25] -- -- Request for Comments: Draft cisco Systems, Inc. "Boolean whether ICMP unreachables will be sent or not." ::= { lipAddrEntry 6 } -- End of table -- Local IP Routing Table -- This group provides additional objects to the table -- defined by RFC1156. lipRoutingTable OBJECT-TYPE SYNTAX SEQUENCE OF LIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP routing entries." ::= { lip 2 } lipRouteEntry OBJECT-TYPE SYNTAX LIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco IP routing implementation." INDEX { ipRouteDest } ::= { lipRoutingTable 1 } LIpRouteEntry ::= SEQUENCE { locRtMask NetworkAddress, locRtCount INTEGER, locRtUses INTEGER } -- The following section describes the components of the -- table. -- cisco MIB [Page 26] -- -- Request for Comments: Draft cisco Systems, Inc. locRtMask OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Routing table network mask." ::= { lipRouteEntry 1 } locRtCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of parallel routes within routing table." ::= { lipRouteEntry 2 } locRtUses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times this route was used in a forward operation." ::= { lipRouteEntry 3 } -- End of table actThresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Threshold of IP accounting records in use before IP traffic will be discarded." ::= { lip 4 } actLostPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lost IP packets due to memory limitations." ::= { lip 5 } -- cisco MIB [Page 27] -- -- Request for Comments: Draft cisco Systems, Inc. actLostByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total bytes of lost IP packets." ::= { lip 6 } -- Local IP Accounting Table -- This group provides access to the cisco IP accounting -- support. lipAccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF LIpAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP accounting entries." ::= { lip 7 } lipAccountEntry OBJECT-TYPE SYNTAX LIpAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects necessary for IP accounting." INDEX { actSrc, actDst } ::= { lipAccountingTable 1 } LIpAccountEntry ::= SEQUENCE { actSrc NetworkAddress, actDst NetworkAddress, actPkts INTEGER, actByts INTEGER } -- cisco MIB [Page 28] -- -- Request for Comments: Draft cisco Systems, Inc. -- The following section describes the components of the -- table. actSrc OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Source address for host traffic matrix." ::= { lipAccountEntry 1 } actDst OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Destination address for host traffic matrix." ::= { lipAccountEntry 2 } actPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of IP packets sent from source to destination." ::= { lipAccountEntry 3 } actByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes in IP packets from source to destination." ::= { lipAccountEntry 4 } -- End of table actAge OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory -- cisco MIB [Page 29] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "The age of the data in the current data matrix." ::= { lip 8 } -- Local IP Checkpoint Accounting Table -- This group provides access to the cisco -- IP checkpoint accounting support. lipCkAccountingTable OBJECT-TYPE SYNTAX SEQUENCE OF LIpCkAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of IP checkpoint accounting entries." ::= { lip 9 } lipCkAccountEntry OBJECT-TYPE SYNTAX LIpCkAccountEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of objects necessary for IP checkpoint accounting." INDEX { ckactSrc, ckactDst } ::= { lipCkAccountingTable 1 } LIpCkAccountEntry ::= SEQUENCE { ckactSrc NetworkAddress, ckactDst NetworkAddress, ckactPkts INTEGER, ckactByts INTEGER } -- The following section describes the components of the -- table. -- cisco MIB [Page 30] -- -- Request for Comments: Draft cisco Systems, Inc. ckactSrc OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Source address for host in checkpoint traffic matrix." ::= { lipCkAccountEntry 1 } ckactDst OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Destination address for host in checkpoint traffic matrix." ::= { lipCkAccountEntry 2 } ckactPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of IP packets sent from source to destination in checkpoint matrix." ::= { lipCkAccountEntry 3 } ckactByts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes in IP packets from source to destination in checkpoint matrix." ::= { lipCkAccountEntry 4 } -- End of table ckactAge OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Age of data in the checkpoint matrix." -- cisco MIB [Page 31] -- -- Request for Comments: Draft cisco Systems, Inc. ::= { lip 10 } actCheckPoint OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Check points the accounting database. This mib variable must be read and then set with the same value for the check point to succeed. The value read and then set will be incremented after a successful set request" ::= { lip 11 } ipNoaccess OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to access control failure." ::= { lip 12 } -- Local TCP Group -- This group is present in all products which are using the -- TCP protocol. -- Local TCP Connection Table -- This group provides additional objects to the table defined -- by RFC1156. ltcpConnTable OBJECT-TYPE SYNTAX SEQUENCE OF LTcpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of TCP connection entries." ::= { ltcp 1 } ltcpConnEntry OBJECT-TYPE SYNTAX LTcpConnEntry -- cisco MIB [Page 32] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of additional objects in the cisco TCP implementation." INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort} ::= { ltcpConnTable 1 } LTcpConnEntry ::= SEQUENCE { loctcpConnInBytes INTEGER, loctcpConnOutBytes INTEGER, loctcpConnInPkts INTEGER, loctcpConnOutPkts INTEGER, loctcpConnElapsed TimeTicks } -- The following section describes the components of the -- table. loctcpConnInBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes input for this TCP connection." ::= { ltcpConnEntry 1 } loctcpConnOutBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bytes output for this TCP connection." ::= { ltcpConnEntry 2 } loctcpConnInPkts OBJECT-TYPE SYNTAX INTEGER -- cisco MIB [Page 33] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS read-only STATUS mandatory DESCRIPTION "Packets input for this TCP connection." ::= { ltcpConnEntry 3 } loctcpConnOutPkts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Packets output for this TCP connection." ::= { ltcpConnEntry 4 } loctcpConnElapsed OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "How long this TCP connection has been established." ::= { ltcpConnEntry 5 } -- End of table -- Local cisco Terminal Server Group -- This group is present in all products which contain -- asynchronous terminal lines. tsLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of physical lines on this device." ::= { lts 1 } -- Local Terminal Server Line Table -- This group contains terminal server specific -- information on a per line basis. -- cisco MIB [Page 34] -- -- Request for Comments: Draft cisco Systems, Inc. ltsLineTable OBJECT-TYPE SYNTAX SEQUENCE OF LTsLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of terminal server line entries." ::= { lts 2 } ltsLineEntry OBJECT-TYPE SYNTAX LTsLineEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of per TTY objects in the cisco Terminal Server implementation." INDEX { INTEGER } ::= { ltsLineTable 1 } LTsLineEntry ::= SEQUENCE { tsLineActive INTEGER, tsLineType INTEGER, tsLineAutobaud INTEGER, tsLineSpeedin INTEGER, tsLineSpeedout INTEGER, tsLineFlow INTEGER, tsLineModem INTEGER, tsLineLoc DisplayString, tsLineTerm DisplayString, tsLineScrlen INTEGER, tsLineScrwid INTEGER, tsLineEsc OCTET STRING, tsLineTmo -- cisco MIB [Page 35] -- -- Request for Comments: Draft cisco Systems, Inc. INTEGER, tsLineSestmo INTEGER, tsLineRotary INTEGER, tsLineUses INTEGER, tsLineNses INTEGER, tsLineUser DisplayString, tsLineNoise INTEGER } -- The following section describes the components of the -- table. tsLineActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether this line is active or not." ::= { ltsLineEntry 1 } tsLineType OBJECT-TYPE SYNTAX INTEGER { unknown(1), console(2), terminal(3), line-printer(4), virtual-terminal(5), auxiliary(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of line." ::= { ltsLineEntry 2 } tsLineAutobaud OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 36] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Boolean whether line will autobaud or not." ::= { ltsLineEntry 3 } tsLineSpeedin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "What input speed the line is running at." ::= { ltsLineEntry 4 } tsLineSpeedout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "What output speed the line is running at." ::= { ltsLineEntry 5 } tsLineFlow OBJECT-TYPE SYNTAX INTEGER { unknown(1), none(2), software-input(3), software-output(4), software-both(5), hardware-input(6), hardware-output(7), hardware-both(8) } ACCESS read-only STATUS mandatory DESCRIPTION "What kind of flow control the line is using." ::= { ltsLineEntry 6 } tsLineModem OBJECT-TYPE SYNTAX INTEGER { unknown(1), none(2), call-in(3), call-out(4), -- cisco MIB [Page 37] -- -- Request for Comments: Draft cisco Systems, Inc. cts-required(5), rs-is-cd(6) } ACCESS read-only STATUS mandatory DESCRIPTION "What kind of modem control the line is using." ::= { ltsLineEntry 7 } tsLineLoc OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Describes the line's physical location." ::= { ltsLineEntry 8 } tsLineTerm OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Describes the line's terminal type." ::= { ltsLineEntry 9 } tsLineScrlen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length in lines of the screen of terminal attached to this line." ::= { ltsLineEntry 10 } tsLineScrwid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Width in characters of the screen of terminal attached to this line." ::= { ltsLineEntry 11 } tsLineEsc OBJECT-TYPE -- cisco MIB [Page 38] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Escape character used to break out of active sessions." ::= { ltsLineEntry 12 } tsLineTmo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line idleness timeout in seconds." ::= { ltsLineEntry 13 } tsLineSestmo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Session idleness timeout in seconds." ::= { ltsLineEntry 14 } tsLineRotary OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Rotary group number the line belongs in." ::= { ltsLineEntry 15 } tsLineUses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a connection has been made to or from this line." ::= { ltsLineEntry 16 } tsLineNses OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory -- cisco MIB [Page 39] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Current number of sessions in use on this line." ::= { ltsLineEntry 17 } tsLineUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "TACACS user name, if TACACS enabled, of user on this line." ::= { ltsLineEntry 18 } tsLineNoise OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of garbage characters received when line inactive." ::= { ltsLineEntry 19 } -- End of table -- Local Terminal Server Line Session Table -- This group contains terminal server specific -- information on a per line and per session basis. ltsLineSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF LTsLineSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of terminal server line and session entries." ::= { lts 3 } ltsLineSessionEntry OBJECT-TYPE SYNTAX LTsLineSessionEntry ACCESS not-accessible STATUS mandatory -- cisco MIB [Page 40] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "A collection of per session and per TTY objects in the cisco Terminal Server implementation." INDEX { INTEGER, INTEGER } ::= { ltsLineSessionTable 1 } LTsLineSessionEntry ::= SEQUENCE { tslineSesType INTEGER, tslineSesDir INTEGER, tslineSesAddr NetworkAddress, tslineSesName DisplayString, tslineSesCur INTEGER, tslineSesIdle INTEGER } -- The following section describes the components of the -- table. tslineSesType OBJECT-TYPE SYNTAX INTEGER { unknown(1), pad(2), stream(3), rlogin(4), telnet(5), tcp(6), lat(7), mop(8), slip(9), xremote(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of session." ::= { ltsLineSessionEntry 1 } -- cisco MIB [Page 41] -- -- Request for Comments: Draft cisco Systems, Inc. tslineSesDir OBJECT-TYPE SYNTAX INTEGER { unknown(1), incoming(2), outgoing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Direction of session." ::= { ltsLineSessionEntry 2 } tslineSesAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Remote host address of session. [What about PAD connections?]" ::= { ltsLineSessionEntry 3 } tslineSesName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Remote host name of session." ::= { ltsLineSessionEntry 4 } tslineSesCur OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Boolean whether session is the currently active one." ::= { ltsLineSessionEntry 5 } tslineSesIdle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time in seconds session has been idle." ::= { ltsLineSessionEntry 6 } -- cisco MIB [Page 42] -- -- Request for Comments: Draft cisco Systems, Inc. -- End of table tsMsgTtyLine OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "tty line to send the message to. -1 will send it to all tty lines" ::= { lts 4 } tsMsgIntervaltim OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Interval between reissuing message in milliseconds. Minimum non-zero setting is 10000. 0 will cause the routine to choose its own intervals becoming more frequent as MessageDuration gets close to expiring. 2hr, 1hr, 30min, 5min, 1min" ::= { lts 5 } tsMsgDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Length of time to reissue message in milliseconds. Minimum non-zero setting is 10000. A setting of 0 will not repeat the message." ::= { lts 6 } tsMsgText OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Up to 256 characters that will make up the message" ::= { lts 7 } tsMsgTmpBanner OBJECT-TYPE -- cisco MIB [Page 43] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER { no(1), additive(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Should the message be used as a temporary banner. 1 - No. 2 - In addition to the normal banner" ::= { lts 8 } tsMsgSend OBJECT-TYPE SYNTAX INTEGER { nothing(1), reload(2), messagedone(3), abort(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sends the message. The value determines what to do after the message has completed." ::= { lts 9 } -- Temporary Variable Section -- This section is equivalent to the experimental -- space defined by the SMI. It contains variables -- that are useful to have but are beyond cisco's -- ability to control and maintain. This section can -- change from release to release without warning. -- This document controls what is contained here for -- this version. -- Temporary DECNET Section -- This group is present in all router based products. dnForward OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 44] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Total count of DECNET packets forwarded." ::= { decnet 1 } dnReceived OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of total DECNET packets received." ::= { decnet 2 } dnFormaterr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of DECNET packets received with header errors." ::= { decnet 3 } dnNotgateway OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received while not routing." ::= { decnet 4 } dnNotimp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of unknown control packets received." ::= { decnet 5 } dnHellos OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION -- cisco MIB [Page 45] -- -- Request for Comments: Draft cisco Systems, Inc. "Total number of Hellos received." ::= { decnet 6 } dnBadhello OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received bad Hellos." ::= { decnet 7 } dnNotlong OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received packets not in long format." ::= { decnet 8 } dnDatas OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received data packets." ::= { decnet 9 } dnBigaddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of too large addresses." ::= { decnet 10 } dnNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to no route present." ::= { decnet 11 } -- cisco MIB [Page 46] -- -- Request for Comments: Draft cisco Systems, Inc. dnNoencap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to output encapsulation failure." ::= { decnet 12 } dnLevel1s OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets received." ::= { decnet 13 } dnBadlevel1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bad Level 1 routing packets received." ::= { decnet 14 } dnToomanyhops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received which visited too many nodes." ::= { decnet 15 } dnHellosent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Hellos output." ::= { decnet 16 } dnLevel1sent OBJECT-TYPE -- cisco MIB [Page 47] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets sent." ::= { decnet 17 } dnNomemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of memory requests denied." ::= { decnet 18 } dnOtherhello OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Hellos received from another area." ::= { decnet 19 } dnOtherlevel1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 1 routing packets received from another area." ::= { decnet 20 } dnLevel2s OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 2 routing packets received." ::= { decnet 21 } dnLevel2sent OBJECT-TYPE SYNTAX INTEGER -- cisco MIB [Page 48] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS read-only STATUS mandatory DESCRIPTION "Total number of Level 2 routing packets sent." ::= { decnet 22 } dnNovector OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of missing routing vectors." ::= { decnet 23 } dnOtherlevel2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of received Level 2 routing packets from another area." ::= { decnet 24 } dnNoaccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets dropped due to access control failure." ::= { decnet 25 } dnAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF DnAreaTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET area routing table" ::= { decnet 26 } dnAreaTableEntry OBJECT-TYPE SYNTAX DnAreaTableEntry ACCESS not-accessible STATUS mandatory -- cisco MIB [Page 49] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "DECNET area routing table" INDEX { dnArea } ::= { dnAreaTable 1 } DnAreaTableEntry ::= SEQUENCE { dnArea INTEGER, dnACost INTEGER, dnAHop INTEGER, dnAIfIndex INTEGER, dnANextHop OCTET STRING, dnAAge INTEGER, dnAPrio INTEGER } -- The following section describes the components of the -- table. dnArea OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DECNet area from the area table." ::= { dnAreaTableEntry 1 } dnACost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of area in the area table." ::= { dnAreaTableEntry 2 } dnAHop OBJECT-TYPE SYNTAX INTEGER -- cisco MIB [Page 50] -- -- Request for Comments: Draft cisco Systems, Inc. ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to area in the area table." ::= { dnAreaTableEntry 3 } dnAIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface to the next hop address to the area. 0 denotes self." ::= { dnAreaTableEntry 4 } dnANextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Next hop DECNet address." ::= { dnAreaTableEntry 5 } dnAAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Age in seconds of area route." ::= { dnAreaTableEntry 6 } dnAPrio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority of next hop router for area route." ::= { dnAreaTableEntry 7 } -- End of table dnHostTable OBJECT-TYPE SYNTAX SEQUENCE OF DnHostTableEntry ACCESS not-accessible -- cisco MIB [Page 51] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "DECNET routing table" ::= { decnet 27 } dnHostTableEntry OBJECT-TYPE SYNTAX DnHostTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET routing table" INDEX { INTEGER, INTEGER } ::= { dnHostTable 1 } DnHostTableEntry ::= SEQUENCE { dnHost INTEGER, dnHCost INTEGER, dnHHop INTEGER, dnHIfIndex INTEGER, dnHNextHop OCTET STRING, dnHAge INTEGER, dnHPrio INTEGER } -- The following section describes the components of the -- table. dnHost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DECNet node address from the routing table." ::= { dnHostTableEntry 1 } dnHCost OBJECT-TYPE -- cisco MIB [Page 52] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of path to node in the routing table." ::= { dnHostTableEntry 2 } dnHHop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to node in the routing table." ::= { dnHostTableEntry 3 } dnHIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface to the next hop address to the node. 0 denotes self." ::= { dnHostTableEntry 4 } dnHNextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Next hop DECNet address." ::= { dnHostTableEntry 5 } dnHAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Age in seconds of route to node." ::= { dnHostTableEntry 6 } dnHPrio OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory -- cisco MIB [Page 53] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Priority of next hop router for node." ::= { dnHostTableEntry 7 } -- End of table dnIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DnIfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET interface table" ::= { decnet 28 } dnIfTableEntry OBJECT-TYPE SYNTAX DnIfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DECNET interface table" INDEX { ifIndex } ::= { dnIfTable 1 } DnIfTableEntry ::= SEQUENCE { dnIfCost INTEGER } -- The following section describes the components of the -- table. dnIfCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Cost of this interface." ::= { dnIfTableEntry 1 } -- End of table -- cisco MIB [Page 54] -- -- Request for Comments: Draft cisco Systems, Inc. -- Temporary XNS Section -- This group is present in all router based products. xnsInput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total input count of number of XNS packets." ::= { xns 1 } xnsLocal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of XNS input packets for this host." ::= { xns 2 } xnsBcastin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input broadcast packets." ::= { xns 3 } xnsForward OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS packets forwarded." ::= { xns 4 } xnsBcastout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS output -- cisco MIB [Page 55] -- -- Request for Comments: Draft cisco Systems, Inc. broadcast packets." ::= { xns 5 } xnsErrin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Error input packets." ::= { xns 6 } xnsErrout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Error output packets." ::= { xns 7 } xnsFormerr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input packets with header errors." ::= { xns 8 } xnsChksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input packets with checksum errors." ::= { xns 9 } xnsNotgate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input packets -- cisco MIB [Page 56] -- -- Request for Comments: Draft cisco Systems, Inc. received while not routing." ::= { xns 10 } xnsHopcnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input packets that have exceeded the maximum hop count." ::= { xns 11 } xnsNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS packets dropped due to no route." ::= { xns 12 } xnsNoencap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS packets dropped due to output encapsulation failure." ::= { xns 13 } xnsOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS output packets." ::= { xns 14 } xnsInmult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS input multicast -- cisco MIB [Page 57] -- -- Request for Comments: Draft cisco Systems, Inc. packets." ::= { xns 15 } xnsUnknown OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of unknown XNS input packets." ::= { xns 16 } xnsFwdbrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS broadcast packets forwarded." ::= { xns 17 } xnsEchoreqin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Echo request packets received." ::= { xns 18 } xnsEchoreqout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Echo request packets sent." ::= { xns 19 } xnsEchorepin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Echo reply -- cisco MIB [Page 58] -- -- Request for Comments: Draft cisco Systems, Inc. packets received." ::= { xns 20 } xnsEchorepout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of XNS Echo reply packets sent." ::= { xns 21 } -- Temporary AppleTalk Section -- This group is present in all router based products. atInput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total input count of number of AppleTalk packets." ::= { appletalk 1 } atLocal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of AppleTalk input packets for this host." ::= { appletalk 2 } atBcastin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk input broadcast packets." ::= { appletalk 3 } atForward OBJECT-TYPE -- cisco MIB [Page 59] -- -- Request for Comments: Draft cisco Systems, Inc. SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk packets forwarded." ::= { appletalk 4 } atBcastout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk output broadcast packets." ::= { appletalk 5 } atChksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk input packets with checksum erors." ::= { appletalk 7 } atNotgate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of AppleTalk input packets received while not routing." ::= { appletalk 8 } atHopcnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk input packets that have exceeded the maximum hop count." ::= { appletalk 9 } -- cisco MIB [Page 60] -- -- Request for Comments: Draft cisco Systems, Inc. atNoaccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of AppleTalk packets dropped due to access control." ::= { appletalk 10 } atNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk packets dropped due to no route." ::= { appletalk 11 } atNoencap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk packets dropped due to output encapsulation failure." ::= { appletalk 12 } atOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk output packets." ::= { appletalk 13 } atInmult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk input multicast packets." ::= { appletalk 14 } -- cisco MIB [Page 61] -- -- Request for Comments: Draft cisco Systems, Inc. atRtmpin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk RTMP packets received." ::= { appletalk 15 } atRtmpout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk RTMP packets sent." ::= { appletalk 16 } atNbpin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk NBP packets received." ::= { appletalk 17 } atNbpout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk NBP packets sent." ::= { appletalk 18 } atAtp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk ATP packets received." ::= { appletalk 19 } -- cisco MIB [Page 62] -- -- Request for Comments: Draft cisco Systems, Inc. atZipin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk ZIP packets received." ::= { appletalk 20 } atZipout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk ZIP packets sent." ::= { appletalk 21 } atEcho OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk Echo packets received." ::= { appletalk 22 } atEchoill OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of illegal AppleTalk Echo packets received." ::= { appletalk 23 } atDdpshort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of short AppleTalk DDP packets received." ::= { appletalk 24 } -- cisco MIB [Page 63] -- -- Request for Comments: Draft cisco Systems, Inc. atDdplong OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of long AppleTalk DDP packets received." ::= { appletalk 25 } atDdpbad OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of illegal sized AppleTalk DDP packets received." ::= { appletalk 26 } atNobuffer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk packets lost due to no memory." ::= { appletalk 27 } atArpreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of input AppleTalk ARP request packets." ::= { appletalk 28 } atArpreply OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of AppleTalk ARP reply packets output." ::= { appletalk 29 } -- cisco MIB [Page 64] -- -- Request for Comments: Draft cisco Systems, Inc. atArpprobe OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of input AppleTalk ARP probe packets." ::= { appletalk 30 } atUnknown OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of unknown AppleTalk input packets." ::= { appletalk 31 } -- Temporary Novell Section -- This group is present in all router based products. novellInput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total input count of number of NOVELL packets." ::= { novell 1 } novellBcastin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL input broadcast packets." ::= { novell 2 } novellForward OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory -- cisco MIB [Page 65] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Total count of number of NOVELL packets forwarded." ::= { novell 3 } novellBcastout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL output broadcast packets." ::= { novell 4 } novellFormerr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL input packets with header errors." ::= { novell 5 } novellChksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL input packets with checksum erors." ::= { novell 6 } novellHopcnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL input packets that have exceeded the maximum hop count." ::= { novell 7 } novellNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 66] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Total count of number of NOVELL packets dropped due to no route." ::= { novell 8 } novellNoencap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL packets dropped due to output encapsulation failure." ::= { novell 9 } novellOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL output packets." ::= { novell 10 } novellInmult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL input multicast packets." ::= { novell 11 } novellLocal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of NOVELL input packets for this host." ::= { novell 12 } novellUnknown OBJECT-TYPE SYNTAX INTEGER ACCESS read-only -- cisco MIB [Page 67] -- -- Request for Comments: Draft cisco Systems, Inc. STATUS mandatory DESCRIPTION "Total count of number of unknown NOVELL input packets." ::= { novell 13 } novellSapreqin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL SAP request packets received." ::= { novell 14 } novellSapresin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL SAP response packets received." ::= { novell 15 } novellSapout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL SAP request packets sent." ::= { novell 16 } novellSapreply OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of NOVELL SAP reply packets sent." ::= { novell 17 } -- Temporary Vines Section -- cisco MIB [Page 68] -- -- Request for Comments: Draft cisco Systems, Inc. -- This group is present in all router based products. vinesInput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total input count of number of Vines packets." ::= { vines 1 } vinesOutput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines output packets." ::= { vines 2 } vinesLocaldest OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of Vines input packets for this host." ::= { vines 3 } vinesForwarded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines packets forwarded." ::= { vines 4 } vinesBcastin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines input broadcast packets." -- cisco MIB [Page 69] -- -- Request for Comments: Draft cisco Systems, Inc. ::= { vines 5 } vinesBcastout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines output broadcast packets." ::= { vines 6 } vinesBcastfwd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines broadcast packets forwarded." ::= { vines 7 } vinesNotlan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines broadcast packets not forwarded to all interfaces because the LAN ONLY bit was set." ::= { vines 8 } vinesNotgt4800 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines broadcast packets not forwarded to all interfaces because the OVER 4800 BPS bit was set." ::= { vines 9 } vinesNocharges OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION -- cisco MIB [Page 70] -- -- Request for Comments: Draft cisco Systems, Inc. "Total count of number of Vines broadcast packets not forwarded to all interfaces because the NO CHARGES only bit was set." ::= { vines 10 } vinesFormaterror OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines input packets with header errors." ::= { vines 11 } vinesCksumerr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines input packets with checksum erors." ::= { vines 12 } vinesHopcount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines input packets that have exceeded the maximum hop count." ::= { vines 13 } vinesNoroute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines packets dropped due to no route." ::= { vines 14 } vinesEncapsfailed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory -- cisco MIB [Page 71] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Total count of number of Vines packets dropped due to output encapsulation failed." ::= { vines 15 } vinesUnknown OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of unknown Vines input packets." ::= { vines 16 } vinesIcpIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines ICP packets received." ::= { vines 17 } vinesIcpOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines ICP packets generaed." ::= { vines 18 } vinesMetricOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines ICP Metric Notification packets generated." ::= { vines 19 } vinesMacEchoIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory -- cisco MIB [Page 72] -- -- Request for Comments: Draft cisco Systems, Inc. DESCRIPTION "Total count of number of Vines MAC level Echo packets received." ::= { vines 20 } vinesMacEchoOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines MAC level Echo packets generated." ::= { vines 21 } vinesEchoIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines Echo packets received." ::= { vines 22 } vinesEchoOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total count of number of Vines Echo packets generated." ::= { vines 23 } END -- cisco MIB [Page 73] --