--- ArubaOS 6.5.2.0_59123
-- vim:set ts=4 sw=4:
ARUBA-TC DEFINITIONS ::= BEGIN

IMPORTS
    ObjectSyntax, TimeTicks, Integer32
        FROM SNMPv2-SMI;


-- definition of textual conventions

ArubaEnableValue ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "Represents a Flag which is either Enabled or Disabled."
    SYNTAX       INTEGER { enabled(1), disabled(2) }


ArubaFrameType ::= TEXTUAL-CONVENTION
   	STATUS       current
   	DESCRIPTION
           "Represents the Frame type."
    SYNTAX       INTEGER {
						associateRequest(0),
						associateResponse(1),
						reassociateRequest(2),
						reassociateResponse(3),
						probeRequest(4),
						probeResponse(5),
						beacon(8),
						atim(9),
						disassociate(10),
						auth(11),
						deauth(12)
				 }

ArubaPhyType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the PHY-type of the access point or client.  Wired clients will
		  show 'wired' in user MIB entries.
		"
	SYNTAX       INTEGER {
		 				dot11a(1),
						dot11b(2),
						dot11g(3),
						dot11ag(4),
						wired(5)
					  }
        
ArubaHTMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the HT status of the access point or client.
		"
	SYNTAX       INTEGER {
		 				none(1),
						ht20(2),
						ht40(3),
						vht20(4),
						vht40(5),
						vht80(6),
						vht160(7),
						vht80plus80(8)
					  }
        
ArubaHTExtChannel ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the extension channel offset relative to the current channel."
	SYNTAX       INTEGER {
		 				none(1),
						above(2),
						below(3),
						eighty(4)
					  }
        
ArubaMonEncryptionType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the encryption type supported by the access point."
	SYNTAX       INTEGER {
		 				open(0),
						wep(1),
						wpa(2),
						wpa2(3)
					  }

ArubaMonEncryptionCipher ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the WPA encryption cipher supported by the access point."
	SYNTAX       INTEGER {
		 				none(0),
						wep40(1),
						wep104(2),
						tkip(3),
                        aesccmp(4),
                        other(5)
					  }

ArubaMonAuthAlgorithm ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the WPA authentication algorithm supported by the access point."
	SYNTAX       INTEGER {
		 				none(0),
						psk(1),
						dot1x(2),
                        other(3)
					  }
                      
ArubaSwitchRole ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the role of the controller"
	SYNTAX       INTEGER {
		 				master(1),
						local(2),
						backupmaster(3)
					  }
          
ArubaSupportStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents if a feature is supported or unsupported."
	SYNTAX       INTEGER {
		 				unsupported(1),
						supported(2)
					  }
         
ArubaActiveState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents if a feature is active or inactive."
	SYNTAX       INTEGER {
		 				active(1),
						inactive(2)
					  }
          
ArubaACLDomain ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents both the source and destination to which an ACL rule will
		  be applied.
		"
	SYNTAX       INTEGER {
		 				alias(1),
						any(2),
						user(3),
						host(4),
						network(5)
					  }
           
ArubaACLNetworkServiceType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the network service in an ACL Rule."
	SYNTAX       INTEGER {
		 				alias(1),
						any(2),
						tcp(3),
						udp(4),
						protocol(5)
					  }
            
ArubaACLAction ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Actions in an ACL rule."
	SYNTAX       INTEGER {
		 				deny(1),
						permit(2),
						srcNAT(3),
						dstNAT(4),
						redirect(5)
					  }
             
ArubaDaysOfWeek ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Actions in an ACL rule."
	SYNTAX       INTEGER {
		 				sun(1),
						mon(2),
						tue(3),
						wed(4),
						thu(5),
						fri(6),
						sat(7)
					  }
              
ArubaAuthenticationMethods ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Authentication Method."
	SYNTAX       INTEGER {
		 				none(0),
		 				web(1),
						mac(2),
						vpn(3),
						dot1x(4),
						kerberos(5),
						secureId(7),
						pubcookie(15),
						xSec(16),
						xSecMachine(17),
						via-vpn(28),
						other(255)
					  }
     
ArubaSubAuthenticationMethods ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Sub Authentication Method (e.g. EAP type)."
	SYNTAX       INTEGER {
		 				authPAP(1),
						authCHAP(2),
						authMSCHAP(3),
						authMSCHAPv2(4),
						eapTLS(5),
						eapTTLS(6),
						eapLEAP(7),
						eapMD5(8),
						eapPEAP(9)
					  }

ArubaEncryptionType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Encryption Method."
	SYNTAX       INTEGER {
		 				none(0),
		 				static-wep(1),
					    dynamic-wep(2),
						wpa-psk-tkip(3),
						wpa-tkip(4),
						wpa-psk-aes(5),
						wpa-aes(6),
						wpa2-psk-tkip(7),
						wpa2-tkip(8),
						wpa2-psk-aes(9),
						wpa2-aes(10),
                        xSec(11),
                        bSec-128(12),
                        bSec-256(13),
                        aes-128-cmac(14),
                        unknown(15)
					  }
     
ArubaUserForwardMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" User Forwarding Mode."
	SYNTAX       INTEGER {
		 				tunnel-encrypted(0),
                        bridge(1),
		 				tunnel-decrypted(2),
					    split-tunnel(3)
					  }

ArubaRogueApType ::= TEXTUAL-CONVENTION
   STATUS	  current
   DESCRIPTION
   		"Represents the Rogue AP Type. "
   SYNTAX      INTEGER {
						valid(1),
						interfering(2),
						unsecure(3),
		 				dos(4),
						unknown(5),
						knownInterfering(6),
						suspectedUnsecure(7)
					 }
          
ArubaAPMatchType ::= TEXTUAL-CONVENTION
   STATUS	  current
   DESCRIPTION
   		"Represents the match type of a suspected rogue AP. "
   SYNTAX      INTEGER {
						unknown(0),
						configuredWiredMac(1),
						ethernetWiredMac(2),
						apWiredMac(3),
		 				externalWiredMac(4),
						manual(5),
						baseBSSIDOverride(6),
						mms(7),
						ethernetGatewayWiredMac(8),
						classificationDisabled(9),
						apBSSID(10),
						propagatedEthernetWiredMac(11),
						apRule(12),
						systemWiredMac(13),
						systemGatewayMac(14)
					 }

ArubaAPMatchMethod ::= TEXTUAL-CONVENTION
   STATUS	  current
   DESCRIPTION
   		"Represents the match method of a suspected rogue AP. "
   SYNTAX      INTEGER {
						notApplicable(0),
						exactMatch(1),
						plusOneMatch(2),
						minusOneMatch(3),
						ouiMatch(4)
					 }

ArubaStationType ::= TEXTUAL-CONVENTION
   STATUS	  current
   DESCRIPTION
   		"Represents the station type. "
   SYNTAX      INTEGER {
						unknown(0),
						valid(1),
						interfering(2),
		 				dos(3)
					 }
          
ArubaEncryptionMethods ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Actions in an ACL rule."
    SYNTAX      BITS{
						disabled(0),
						static-wep(1),
						dynamic-wep(2),
						static-wpa(3),
						dynamic-wpa(4),
						wpa2-psk-aes(5),
						wpa2-8021x-aes(6),
						wpa2PreAuth(7),
						xsec(8),
						wpa-psk-aes(9),
						wpa-aes(10),
						wpa2-psk-tkip(11),
						wpa2-8021x-tkip(12)
						}

 ArubaHashAlgorithms ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Actions in an ACL rule."
	SYNTAX       INTEGER {
		 				md5(1),
						sha(2)
					  }
  
ArubaVlanValidRange	::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the Valid Vlan Id Range."
	SYNTAX		INTEGER(1..4095)
  
ArubaPortMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the controller port mode."
	SYNTAX		INTEGER {
					access(1),
					dot1q(2)
				}
  
ArubaDot1dState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the controller port spanning tree state."
	SYNTAX		INTEGER {
					disabled(1),
					blocked(2),
					listening(3),
					learning(4),
					forwarding(5)
				}
  
ArubaAPDot1dState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the AP port spanning tree state."
	SYNTAX		INTEGER {
					notAvailable(1),
					off(2),
					disabled(3),
					listening(4),
					learning(5),
					forwarding(6),
					blocking(7)
				}
  
ArubaPoeState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the POE mode."
	SYNTAX		INTEGER {
					disabled(1),
					enabled(2),
					enabledCisco(3),
                                        notAvailable(4)
				}
 
ArubaCardType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Type of the hardware module.
		"
	SYNTAX		INTEGER {
					lc1(1),
					lc2(2),
					sc1(3),
					sc2(4),
					sw2400(5),
					sw800(6),
					sw200(7),
					m3mk1(8),
					sw3200(9),
					sw3400(10),
					sw3600(11),
					sw650(12),
					sw651(13),
					reserved1(14),
					reserved2(15),
					sw620(16),
					sw7210(17),
					sw7220(18),
					sw7240(19),
					sw3500(20),
					sw2500(21),
					sw1500(22),
					sw7010(23),
					sw7005(24),
					sw7030(25),
					sw7110(26)
				}
 
ArubaESIServerMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The mode of the ESI server.
		"
	SYNTAX		INTEGER {
					bridged(1),
					routed(2),
					nat(3)
				}
 
ArubaESIServerStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The status of the ESI server.
		"
	SYNTAX		INTEGER {
					up(1),
					down(2)
				}

ArubaIfType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The type of interface referred to by the value of ifIndex.
		"
	SYNTAX		INTEGER {
					port(1),
					vlan(2),
					tunnel(3),
					loopback(4)
				}

ArubaVoipProtocolType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The type of VoIP protocols supported.
		"
	SYNTAX       INTEGER{
		 				sccp(1),
						svp(2),
						vocera(3),
						sip(9),
						ua(11),
						h323(13),
						unknown(15)
		 		 }

ArubaAccessPointMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The mode of the access point.
		"
	SYNTAX       INTEGER{
		 				airMonitor(1),
						accessPoint(2),
						accessPointAndMonitor(3),
						meshPortal(4),
						meshPoint(5),
						rfprotectSensor(6),
						spectrumSensor(7)
		 		 }

ArubaAuthServerType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The type of the auth server.
		"
         SYNTAX       INTEGER{
		 				internaldb(1),
						radius(2),
						ldap(3),
						kerberos(4),
						tacacs(5)
					  }

ArubaAddressType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Address Type. 
		"
	SYNTAX       INTEGER{
		 				srcAddress(1),
						dstAddress(2),
						bssid(3)
		 		 }

ArubaBlackListReason ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Black List Reason. 
		"
	SYNTAX       INTEGER {
		 				userDefined(1),
						mitmAttack(2),
						authFailure(3),
						pingFlood(4),
						sessionFlood(5),
						synFlood(6),
						sessionBlacklist(7),
						ipSpoofing(8),
						esiBlacklist(9),
						other(100)
		 			  }

ArubaDBType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		DataBase Type. 
		"
	SYNTAX       INTEGER {
		 				mssql(1),
						mysql(2)
		 			  }


ArubaVrrpState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		DataBase Type. 
		"
	SYNTAX       INTEGER {
						initialize(1),
						backup(2),
		 				master(3)
		 			  }


ArubaOperStateValue ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "Represents Operational state of an interface."
    SYNTAX       INTEGER { up(1), down(2), testing(3) }



ArubaAntennaSetting ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "Represents the status of the external antenna."
    SYNTAX       INTEGER { notPresent(1), enabled(2), disabled(3) }

ArubaAPStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The status of the access point.
		"
	SYNTAX		INTEGER { up(1), down(2) }

ArubaPortSpeed ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Port Speed.
		"
	SYNTAX		INTEGER { speed10Mbps(1), 
						  speed100Mbps(2), 
						  speed1000Mbps(3), 
						  speedAuto(4),
						  speed10Gbps(5)
						}

ArubaPortDuplex ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Port Duplexity.
		"
	SYNTAX		INTEGER { half(1), 
						  full(2), 
						  auto(3)
						}

ArubaPortType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		Port Type.
		"
	SYNTAX		INTEGER { fastethernet(1), 
						  gigabitethernet(2),
						  xgigabitethernet(3) 
						}

ArubaEnet1Mode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Mode of the Ethernet port on the Access Point"
	SYNTAX       INTEGER {
		 				activeStandby(1),
						tunnel(2),
						bridge(3),
						notApplicable(4),
						split(5)
					  }
 
ArubaUnprovisionedStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents whether the AP is provisioned or not."
	SYNTAX       INTEGER {
		 				yes(1),
						no(2)
					  }
 
ArubaMonitorMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents whether the AP has any radios dedicated to monitoring."
	SYNTAX       INTEGER {
		 				unknown(0),
		 				all(1),
						none(2),
						mixed(3)
					  }
 
ArubaConfigurationState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION	
		"Configuration Transfer Types."
	SYNTAX		INTEGER {
					success(1),
					error(2)
				}
 
ArubaConfigurationChangeType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION	
		"Configuration Change Types."
	SYNTAX		INTEGER {
					create(1),
					delete(2),
					modify(3)
				}

ArubaCallStates ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The Call state.
		"
	SYNTAX		INTEGER {
				idle(0),
				initiated(1),
				connecting(2),
				delivered(3),
				connected(4),
				offered(5),
				alerting(6),
				releasing(7),
				cancelling(8),
				challenging(9),
				transient(10),
				blockwait(11),
				succ(12),
				fail(13),
				aborted(14),
				blocked(15)
			}
   
ArubaVoipProtocol ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  VoIP protocol used
		"
	SYNTAX		INTEGER {
			sccp(1), 
			svp(2), 
			vocera(3), 
			sip(9), 
			ua(11), 
			h323(13)
	}

ArubaVoipRegState ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  VoIP registered state
		"
	SYNTAX		INTEGER {
			unknown(0), 
			registering(1), 
			unregistering(2), 
			challenge(3), 
			registered(4), 
			unregistered(5)
	}

ArubaVoiceCdrDirection ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  VoIP CDR direction
		"
	SYNTAX		INTEGER {
			og(0), 
			ic(1)
	}

ArubaVoiceCacBit ::= TEXTUAL-CONVENTION
	STATUS    current
	DESCRIPTION
		"
			Voice CAC bit flags
		"
	SYNTAX 	BITS {
			cacActiveLoadBalancing(0),
			cacHighCapThresholdReached(1),
			cacHandRsrvThresholdReached(2),
			cacPeakCapacityReached(3)
	}
	
ArubaMeshRole ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  Mesh role
		"
	SYNTAX		INTEGER {
			nonmesh(0),
			point(1), 
			portal(2)
	}

ArubaHTRate ::= TEXTUAL-CONVENTION
   	STATUS       current
   	DESCRIPTION
           "Represents HT rate"
    SYNTAX       INTEGER {
					unknown(0),
					ht6dot5(1),
					ht13(2),
					ht13dot5(3),
					ht15(4),
					ht19dot5(5),
					ht26(6),
					ht27(7),
					ht30(8),
					ht39(9),
					ht40dot5(10),
					ht45(11),
					ht52(12),
					ht54(13),
					ht58dot5(14),
					ht60(15),
					ht65(16),
					ht78(17),
					ht81(18),
					ht90(19),
					ht104(20),
					ht108(21),
					ht117(22),
					ht120(23),
					ht121dot5(24),
					ht130(25),
					ht135(26),
					ht150(27),
					ht162(28),
					ht180(29),
					ht216(30),
					ht240(31),
					ht243(32),
					ht270(33),
					ht300(34)
				 }


ArubaARMChangeReason ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		The reason for ARM based change.
		"
	SYNTAX       INTEGER {
                       radarDetected(1),
                       radarCleared(2),
                       txHang(3),
                       txHangClear(4),
                       fortyMhzIntol(5),
                       cancel40mhzIntol(6),
                       fortyMhzAlign(7),
                       armInterference(8),
                       armInvalidCh(9),
                       armErrorThresh(10),
                       armNoiseThresh(11),
                       armEmptyCh(12),
                       armRogueCont(13),
                       armDecreasePower(14),
                       armIncreasePower(15),
                       armTurnOffRadio(16),
                       armTurnOnRadio(17),
                       armChannelQualityThresh(18)
   }

ArubaAPMasterStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  AP status as seen by the master controller
          (used to indicate a status change).
		"
	SYNTAX		INTEGER {
			up(1),
			down(2), 
			move(3)
	}

ArubaDot3azStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the state of Energy Efficient Ethernet (802.3az)."
    SYNTAX      BITS {
						disabled(0),
						unsupported(1),
						eee100BaseTX(2),
						eee1000BaseT(3),
						eee10GBaseT(4),
						eee1000BaseKX(5),
						eee10GBaseKX4(6),
						eee10GBaseKR(7)
					 }
		
ArubaThresholdResourceType ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the Threshold Resource Types"
    SYNTAX      INTEGER {
					dataPathCpu(0),
					controlPathCpu(1),
					controlPathMemory(2),
					totalTunnelCapacity(3),
					userCapacity(4),
					noofAps(5) ,
					noofLocals(6)
				}

ArubaStackState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The state of the stack element in the stack.

        primary   - the stack element is in primary state.
        secondary - the stack element is in secondary state.
        linecard  - the stack element is in linecard state.
        away      - the stack element is in inactive state.

        primary, secondary and linecard implies active state of the stack
        element."
    SYNTAX      INTEGER {
                   primary(1),
                   secondary(2),
                   linecard(3),
                   away(4)
    }

ArubaStackChangeEvent  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify the event which caused change in topology in stack."
    SYNTAX      INTEGER {
                      other(1),
                      primarySlotChanged(2),
                      secondarySlotChanged(3),
                      lineCardSlotChanged(4),
                      roleChanged(5),
                      priorityChanged(6),
                      versionMismatch(7),
                      slotExceeded(8)
    }

ArubaStackIfTopoJoined ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify whether an interface has joined the stacking
        topology or left the topology."
    SYNTAX      INTEGER {
        connected(1),   -- An interface has joined stacking topology.
        disconnected(2) -- An interface has left stacking topology.
    }

InterfaceIndex ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "A unique value, greater than zero, for each interface or
            interface sub-layer in the managed system.  It is
            recommended that values are assigned contiguously starting
            from 1.  The value for each interface sub-layer must remain
            constant at least from one re-initialization of the entity's
            network management system to the next re-initialization."
    SYNTAX       Integer32 (1..2147483647)

ArubaIfState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify the state of an interface.

        linkUp   - Operational state of this interface is up.
        linkDown - Operational state of this interface is down."
    SYNTAX  INTEGER {
        linkUp(1),
        linkDown(2)
    }

ArubaIfStateChangeReason ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify the reason for interface state change.

        admin       - User has explicitly issued 'shutdown' or 'no shutdown'
                      configuration from CLI on this interface.
        loopProtect - If ifState of an interface changes to linkDown, then
                      it is used to specify that a loop has been detected on
                      this interface by loop protect mechanism.
                      If ifState of an interface changes to linkUp, then
                      it is used to specify that loop-protect error has been
                      cleared out on this interface through port auto-recovery
                      mechanism or through explicit clear error-recovery
                      command.
        macLimit    - If ifState of an interface changes to linkDown, then
                      it is used to specify that number of learnt MACs on this
                      interface exceeds the limit configured.
                      If ifState of an interface changes to linkUp, then it is
                      used to specify that mac-limit error has been cleared out
                      on this interface through port auto-recovery mechanism or
                      through explicit clear error-recovery command.
        raGuard     - If ifState of an interface changes to linkDown, then it
                      is used to specify that invalid router advertisement has
                      been identified on this interface, resulting shutting
                      down of this interface.
                      If ifState of an interface changes to linkUp, then it is
                      used to specify that raGuard error has been cleared out on
                      this interface through port auto-recovery mechanism or
                      through explicit clear error-recovery command.
        bpduGuard   - If ifState of an interface changes to linkDown, then it
                      is used to specify that BPDU is received on this interface
                      resulting shutting down of this interface.
                      If ifState of an interface changes to linkUp, then it is
                      used to specify that BPDU Guard error has been cleared out
                      on this interface through port auto-recovery mechanism or
                      through explicit clear error-recovery command."
    SYNTAX  INTEGER {
        admin(1),
        loopProtect(2),
        macLimit(3),
        raGuard(4),
        bpduGuard(5)
    }

ArubaAPUplinkType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "
          AP uplink type
        "
    SYNTAX       INTEGER {
            ethernet(1),
            usb(2),
            pppoe(3),
            wifi(4)
    }

ArubaAPUplinkChangeReason ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify the reason for AP uplink change.

        linkFailure - The uplink went down
        vpnFailure  - VPN tunnel could not be sustained using the uplink
        preemption  - The uplink was pre-empted by a higher-priority uplink"
    SYNTAX  INTEGER {
        linkFailure(1),
        vpnFailure(2),
        preemption(3)
    }

ArubaPortalServerDownReason ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Used to specify the reason for Portal server down.

        connectFail - Connect Portal server fail"
    SYNTAX  INTEGER {
        connectFail(1)
    }

ArubaHaRole ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the HA role of the Aruba controller"
	SYNTAX       INTEGER {
                             dual(0),
                             active(1),
                             standby(2),
                             disabled(3)
                         }

ArubaHaConnectivityStatus ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
  		" Represents the HA standby connectivity status of the Access Point"
	SYNTAX      INTEGER {
                            haSuccess(0),
                            haNetUnreach(1),
                            haCpUnreach(2),
                            haImageMissMatch(3),
                            haApDenied(4),
                            haHbtFailure(5),
                            haInvalidHelloResponse(6),
                            haStandbyTunnelDown(7)
					    }

ArubaFlexRadioMode ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"
		  Flex Radio Operating Mode
		"
	SYNTAX		INTEGER {
                            single2GHzBand(0),
                            single5GHzBand(1),
                            dual2GHzplus5GHzBand(2), 
                            unknown(3),
                            notApplicable(4)
                       }

END