FAN-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Unsigned32 
        FROM SNMPv2-SMI

    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF

    TEXTUAL-CONVENTION
        FROM SNMPv2-TC

    hpSwitch
        FROM HP-ICF-OID;

hpicfFanMIB MODULE-IDENTITY
    LAST-UPDATED "200808271030Z"   --August  27, 2008 10:30 GMT
    ORGANIZATION "HP Networking"
    CONTACT-INFO "Hewlett-Packard Company
                  8000 Foothills Blvd.
                  Roseville, CA 95747"
    DESCRIPTION  "The MIB module is for representing switch fan entity."
    REVISION     "200808271030Z"   --August  27, 2008 10:30 GMT
    DESCRIPTION  "Revision 01."
    ::= { hpSwitch 54 }

-- ********************************************************************
--  FAN Textual Conventions
-- ********************************************************************
HpicfDcFanIndex ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"   
    STATUS       current
    DESCRIPTION  "A unique value that serves as an index to identify the fan." 
    SYNTAX       Unsigned32

HpicfDcFanType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "An enumerated value that indications the fan types."
    SYNTAX       INTEGER {
       unknown(0),
       mm(1),
       fm(2),
       im(3),
       ps(4),    
       rollup(5),
       maxtype(6)
    }

HpicfDcFanAirflowDirection ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION   "An enumerated value which provides an indication of the
                  fan airflow direction. The Physical fan airflow direction
                  could be either from the port towards the power supply
                  module i.e. portToPower(1), or from the power supply module
                  towards the port i.e. powerToPort(2)"
    SYNTAX        INTEGER {
       portToPower(1),
       powerToPort(2)
    }

HpicfDcFanState ::= TEXTUAL-CONVENTION
    STATUS         current
    DESCRIPTION   "An enumerated value which provides an indication of the
                  fan state."
    SYNTAX        INTEGER  {
       failed(0),
       removed(1),
       off(2),
       underspeed(3),
       overspeed(4),    
       ok(5),
       maxstate(6)
    }

-- ********************************************************************
-- Fan Scalars
-- ********************************************************************

hpicfFanScalars OBJECT IDENTIFIER ::= { hpicfFanMIB 1 }

      hpicfFanUserPrefAirflowDir OBJECT-TYPE
      SYNTAX                     INTEGER {
               portToPower(1),
               powerToPort(2)
      }
      MAX-ACCESS                 read-write
      STATUS                     current
      DESCRIPTION  "The user preferred fan airflow direction. The direction could be
                    powerToPort or portToPower. The actual fan direction has to be 
                    changed manually, this will be used to indicate to the user when
                    when the actual fan airflow direction is different from the user
                    preferred airflow direction."
      DEFVAL { powerToPort }
      ::= { hpicfFanScalars 1 }


-- ********************************************************************
-- FAN entry 
-- ********************************************************************

hpicfEntityFan  OBJECT IDENTIFIER ::= { hpicfFanMIB 2 }

hpicfFanTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpicfFanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "This table contains one row for every fan in the switch entity."
    ::= { hpicfEntityFan 1 }

hpicfFanEntry   OBJECT-TYPE
    SYNTAX      HpicfFanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Information about fan entity table."
    INDEX       { hpicfFanIndex }
    ::= { hpicfFanTable 1 }

HpicfFanEntry ::= SEQUENCE {
      hpicfFanIndex             HpicfDcFanIndex,
      hpicfFanTray              Integer32,
      hpicfFanType              HpicfDcFanType,
      hpicfFanState             HpicfDcFanState,
      hpicfFanRecovering        Integer32,
      hpicfFanNumFailures       Counter32, 
      hpicfFanAirflowDirection  HpicfDcFanAirflowDirection 
}

hpicfFanIndex    OBJECT-TYPE
    SYNTAX       HpicfDcFanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "The index that is used to access the switch fan entry table."
    ::= { hpicfFanEntry 1 }

hpicfFanTray OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  "The tray number in which the fan is docked."
    ::= { hpicfFanEntry 2 }

hpicfFanType OBJECT-TYPE
    SYNTAX      HpicfDcFanType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "An indication of the vendor-specific fan."
    ::= { hpicfFanEntry 3 }

hpicfFanState OBJECT-TYPE
    SYNTAX      HpicfDcFanState 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current state of the fan."
    ::= { hpicfFanEntry 4 }

hpicfFanRecovering OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "An indication that the switch fan entity is faulty.
                 Before declaring a fan to be good after a failure is 
                 detected, the same good indication must happen five (5)
                 times in a row. A failure indication is always TRUE, while
                 a good indication could be FALSE, hence this parameter is 
                 used to count the repeated good indications before 
                 declaring the fan to be good "
    ::= { hpicfFanEntry 5 }

hpicfFanNumFailures OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "The number of times the fan has failed."
    ::= { hpicfFanEntry 6 }

hpicfFanAirflowDirection OBJECT-TYPE
    SYNTAX        HpicfDcFanAirflowDirection 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Indication of the fan air flow direction, either
                  from Power supply towards the port or from the port
                  towards the power supply."
    ::= { hpicfFanEntry 7 }


-- ********************************************************************
-- FAN Conformance
--********************************************************************

   hpicfFanConformance OBJECT IDENTIFIER ::= { hpicfFanMIB 3 }
   hpicfFanCompliance  OBJECT IDENTIFIER ::= { hpicfFanConformance 1 }
   hpicfFanGroups      OBJECT IDENTIFIER ::= { hpicfFanConformance 2 }

-- ********************************************************************
-- FAN Complicance
-- ********************************************************************
   hpicfDcFanCompliance MODULE-COMPLIANCE
      STATUS       current
      DESCRIPTION  "The compliance statement for entries which implement 
                    the FAN MIB."
      MODULE        -- This module
      MANDATORY-GROUPS
      {
          hpicfFanScalarsGroup,
          hpicfFanGroup
      }
      GROUP        hpicfFanGroup
      DESCRIPTION  "Objects associated with switch entity FAN."
      ::= { hpicfFanCompliance 1 } 

--
-- FAN Groups
--
   hpicfFanScalarsGroup OBJECT-GROUP
      OBJECTS
      {
           hpicfFanUserPrefAirflowDir
      }
      STATUS      current
      DESCRIPTION "Basic Scalars required in FAN MIB implementation."
      ::= { hpicfFanGroups 1 }

   hpicfFanGroup OBJECT-GROUP
      OBJECTS
      {
          hpicfFanTray,              
          hpicfFanType,              
          hpicfFanState,            
          hpicfFanRecovering,      
          hpicfFanNumFailures,       
          hpicfFanAirflowDirection
      }
      STATUS      current
      DESCRIPTION "FAN MIB parameters "
      ::= { hpicfFanGroups 2 }
END