-- -- Juniper Enterprise Specific MIB: Chassis MIB -- -- Copyright (c) 1998-2013, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Gauge32, Counter32 FROM SNMPv2-SMI DisplayString, TimeStamp, TimeInterval, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC jnxMibs, jnxChassisTraps, jnxChassisOKTraps FROM JUNIPER-SMI; jnxBoxAnatomy MODULE-IDENTITY LAST-UPDATED "201305220000Z" -- Wed May 22 00:00:00 2013 UTC ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "The MIB modules representing Juniper Networks' implementation of enterprise specific MIBs supported by a single SNMP agent." REVISION "200403230000Z" DESCRIPTION "Added chassis identification objects." REVISION "200406300000Z" -- July 30, 2004 DESCRIPTION "Added following new traps for chassis alarm conditions: jnxFruFailed, jnxFruOffline and jnxFruOnline." REVISION "200409170000Z" -- Sep 17, 2004 DESCRIPTION "Added new traps for chassis alarm condition jnxFruCheck." REVISION "200507180000Z" -- Jul 18, 2005 DESCRIPTION "Added new fru type FEB in jnxFruType enumeration." REVISION "200507190000Z" -- Jul 19, 2005 DESCRIPTION "Added new offline reason pfeVersionMismatch to jnxFruOfflineReason enumeration." REVISION "200611200000Z" -- Nov 20, 2006 DESCRIPTION "Added new offline reason fruFebOffline to jnxFruOfflineReason enumeration." REVISION "200807310000Z" -- Jul 31, 2008 DESCRIPTION "Added jnxBoxSystemDomainType object." REVISION "200808010000Z" -- Aug 01, 2008 DESCRIPTION "Added new fru type PSD to jnxFruType enumeration and added jcsX chassis IDs to JnxChassisId enumeration." REVISION "200812310000Z" -- Dec 31, 2008 DESCRIPTION "Added nodeX chassis IDs to JnxChassisId enumeration." REVISION "200901090000Z" -- Jan 09, 2009 DESCRIPTION "Added sfcX and lcc4-lcc15 chassis IDs to JnxChassisId enumeration." REVISION "201010220000Z" -- Oct 22, 2010 DESCRIPTION "Added load average variables" REVISION "201109090000Z" -- Sep 09, 2011 DESCRIPTION "Added jnxBoxPersonality for MidRangius Boxes namely MX40/MX10/MX5" REVISION "201202150000Z" -- Feb 02, 2012 DESCRIPTION "Added new offline reason builtinPicBounce to jnxFruOfflineReason enumeration." REVISION "201202210000Z" -- Feb 21, 2012 DESCRIPTION "Added new jnxFruType: PDU and PSM, and new traps: jnxFmLinkErr and jnxFmCellDropErr." REVISION "201208240000Z" -- Aug 24, 2012 DESCRIPTION "Added new offline reason fruTypeConfigMismatch to jnxFruOfflineReason enumeration." REVISION "201208240000Z" -- Aug 24, 2012 DESCRIPTION "Added new offline reason fruTypeConfigMismatch to jnxFruOfflineReason enumeration." REVISION "201210120000Z" -- Oct 12, 2012 DESCRIPTION "Added new offline reason fruPICOfflineOnEccErrors to jnxFruOfflineReason enumeration." REVISION "201211070000Z" -- Nov 07, 2012 DESCRIPTION "Added new offline reasons fruFpcIncompatible and fruFpcFanTrayPEMIncompatible to jnxFruOfflineReason enumeration." REVISION "201301070000Z" -- Jan 07, 2013 DESCRIPTION "Added new offline reason openflowConfigChange to jnxFruOfflineReason enumeration." REVISION "201302280000Z" -- Feb 28, 2013 DESCRIPTION "Added new offline reasons fruFpcScbIncompatible to jnxFruOfflineReason enumeration." REVISION "201303220000Z" -- Mar 22, 2013 DESCRIPTION "Added new offline reason hwError to jnxFruOfflineReason enumeration." REVISION "201305220000Z" -- May 22, 2013 DESCRIPTION "Added new offline reasons fruReUnresponsive to jnxFruOfflineReason enumeration." REVISION "201307170000Z" -- Jul 17, 2013 DESCRIPTION "Added new Fabric plane offline/online/check traps to trap fabric plane offline/online/fault events." REVISION "201309240000Z" -- Sep 24, 2013 DESCRIPTION "Added new offline reason hwError to jnxFruOfflineReason enumeration." REVISION "201310150000Z" -- Oct 15, 2013 DESCRIPTION "Added new offline reason fruIncompatibleWithPEM, fruIncompatibleWithSIB, and sibIncompatibleWithOtherSIB to jnxFruOfflineReason enumeration." REVISION "201311190000Z" -- Nov 19, 2013 DESCRIPTION "Added new offline reason fruPfeErrors to jnxFruOfflineReason enumeration." ::= { jnxMibs 1 } -- -- Textual Conventions -- JnxChassisId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies a specific router chassis." SYNTAX INTEGER { unknown (1), singleChassis (2), scc (3), lcc0 (4), lcc1 (5), lcc2 (6), lcc3 (7), jcs1 (8), jcs2 (9), jcs3 (10), jcs4 (11), node0 (12), node1 (13), sfc0 (14), sfc1 (15), sfc2 (16), sfc3 (17), sfc4 (18), lcc4 (19), lcc5 (20), lcc6 (21), lcc7 (22), lcc8 (23), lcc9 (24), lcc10 (25), lcc11 (26), lcc12 (27), lcc13 (28), lcc14 (29), lcc15 (30), member0 (31), member1 (32), member2 (33), member3 (34), member4 (35), member5 (36), member6 (37), member7 (38), nodeDevice (39), interconnectDevice (40), controlPlaneDevice (41), directorDevice (42) } -- Juniper Box Anatomy MIB -- -- Top level objects jnxBoxClass OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The class of the box, indicating which product line the box is about, for example, 'Internet Router'." ::= { jnxBoxAnatomy 1 } jnxBoxDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name, model, or detailed description of the box, indicating which product the box is about, for example 'M40'." ::= { jnxBoxAnatomy 2 } jnxBoxSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this subject, blank if unknown or unavailable." ::= { jnxBoxAnatomy 3 } jnxBoxRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision of this subject, blank if unknown or unavailable." ::= { jnxBoxAnatomy 4 } jnxBoxInstalled OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up." ::= { jnxBoxAnatomy 5 } -- -- Box Containers Table -- jnxContainersTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxContainersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of containers entries." ::= { jnxBoxAnatomy 6 } jnxContainersEntry OBJECT-TYPE SYNTAX JnxContainersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of containers table." INDEX { jnxContainersIndex } ::= { jnxContainersTable 1 } JnxContainersEntry ::= SEQUENCE { jnxContainersIndex Integer32, jnxContainersView Integer32, jnxContainersLevel Integer32, jnxContainersWithin Integer32, jnxContainersType OBJECT IDENTIFIER, jnxContainersDescr DisplayString, jnxContainersCount Integer32 } jnxContainersIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The index for this entry." ::= { jnxContainersEntry 1 } jnxContainersView OBJECT-TYPE SYNTAX Integer32 (1..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The view(s) from which the specific container appears. This variable indicates that the specific container is embedded and accessible from the corresponding view(s). The value is a bit map represented as a sum. If multiple bits are set, the specified container(s) are located and accessible from that set of views. The various values representing the bit positions and its corresponding views are: 1 front 2 rear 4 top 8 bottom 16 leftHandSide 32 rightHandSide Note 1: LefHandSide and rightHandSide are referred to based on the view from the front. Note 2: If the specified containers are scattered around various views, the numbering is according to the following sequence: front -> rear -> top -> bottom -> leftHandSide -> rightHandSide For each view plane, the numbering sequence is first from left to right, and then from up to down. Note 3: Even though the value in chassis hardware (e.g. slot number) may be labelled from 0, 1, 2, and up, all the indices in MIB start with 1 (not 0) according to network management convention." ::= { jnxContainersEntry 2 } jnxContainersLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The abstraction level of the box or chassis. It is enumerated from the outside to the inside, from the outer layer to the inner layer. For example, top level (i.e. level 0) refers to chassis frame, level 1 FPC slot within chassis frame, level 2 PIC space within FPC slot." ::= { jnxContainersEntry 3 } jnxContainersWithin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of its next higher level container housing this entry. The associated jnxContainersIndex in the jnxContainersTable represents its next higher level container." ::= { jnxContainersEntry 4 } jnxContainersType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this container." ::= { jnxContainersEntry 5 } jnxContainersDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxContainersEntry 6 } jnxContainersCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of containers of this level per container of the next higher level. e.g. if there are six level 2 containers in level 1 container, then jnxContainersCount for level 2 is six." ::= { jnxContainersEntry 7 } -- -- Box Contents Table -- jnxContentsLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the box contents table last changed. Zero if unknown or already existing when the agent was up." ::= { jnxBoxAnatomy 7 } jnxContentsTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxContentsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of contents entries." ::= { jnxBoxAnatomy 8 } jnxContentsEntry OBJECT-TYPE SYNTAX JnxContentsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of contents table." INDEX { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index } ::= { jnxContentsTable 1 } JnxContentsEntry ::= SEQUENCE { jnxContentsContainerIndex Integer32, jnxContentsL1Index Integer32, jnxContentsL2Index Integer32, jnxContentsL3Index Integer32, jnxContentsType OBJECT IDENTIFIER, jnxContentsDescr DisplayString, jnxContentsSerialNo DisplayString, jnxContentsRevision DisplayString, jnxContentsInstalled TimeStamp, jnxContentsPartNo DisplayString, jnxContentsChassisId JnxChassisId, jnxContentsChassisDescr DisplayString, jnxContentsChassisCleiCode DisplayString } jnxContentsContainerIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxContainersIndex in the jnxContainersTable." ::= { jnxContentsEntry 1 } jnxContentsL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxContentsEntry 2 } jnxContentsL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxContentsEntry 3 } jnxContentsL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxContentsEntry 4 } jnxContentsType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this subject. zeroDotZero if unknown." ::= { jnxContentsEntry 5 } jnxContentsDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxContentsEntry 6 } jnxContentsSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this subject, blank if unknown or unavailable." ::= { jnxContentsEntry 7 } jnxContentsRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision of this subject, blank if unknown or unavailable." ::= { jnxContentsEntry 8 } jnxContentsInstalled OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up." ::= { jnxContentsEntry 9 } jnxContentsPartNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of this subject, blank if unknown or unavailable." ::= { jnxContentsEntry 10 } jnxContentsChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxContentsEntry 11 } jnxContentsChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxContentsEntry 12 } jnxContentsChassisCleiCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The clei code of this subject, blank if unknown or unavailable. A CLEI code is an intelligent code that consists of 10 alphanumeric characters with 4 data elements. The first data element is considered the basic code with the first 2 characters indicating the technology or equipment type, and the third and fourth characters denoting the functional sub-category. The second data element represents the features, and its three characters denote functional capabilities or changes. The third data element has one character and denotes a reference to a manufacturer, system ID, specification, or drawing. The fourth data element consists of two characters and contains complementary data. These two characters provide a means of differentiating or providing uniqueness between the eight character CLEI codes by identifying the manufacturing vintage of the product. Names are assigned via procedures defined in [GR485]. The assigned maintenance agent for the CLEI code, Telcordia Technologies, is responsible for assigning certain equipment and other identifiers (e.g., location, manufacturer/supplier) for the telecommunications industry." ::= { jnxContentsEntry 13 } -- -- Box LED Indicators Table -- jnxLEDLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of sysUpTime when the box LED table last changed. Zero if unknown or already at that state when the agent was up." ::= { jnxBoxAnatomy 9 } jnxLEDTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxLEDEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of status entries." ::= { jnxBoxAnatomy 10 } jnxLEDEntry OBJECT-TYPE SYNTAX JnxLEDEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry of status table." INDEX { jnxLEDAssociateTable, jnxLEDAssociateIndex, jnxLEDL1Index, jnxLEDL2Index, jnxLEDL3Index } ::= { jnxLEDTable 1 } JnxLEDEntry ::= SEQUENCE { jnxLEDAssociateTable INTEGER, jnxLEDAssociateIndex Integer32, jnxLEDL1Index Integer32, jnxLEDL2Index Integer32, jnxLEDL3Index Integer32, jnxLEDOriginator OBJECT IDENTIFIER, jnxLEDDescr DisplayString, jnxLEDState INTEGER, jnxLEDStateOrdered INTEGER } jnxLEDAssociateTable OBJECT-TYPE SYNTAX INTEGER { other(1), jnxContainersTable(2), jnxContentsTable(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The associated table that this entry is related." ::= { jnxLEDEntry 1 } jnxLEDAssociateIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The index of the associated table that this entry is related." ::= { jnxLEDEntry 2 } jnxLEDL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The level one index of the associated table that this entry is related. Zero if unavailable or inapplicable." ::= { jnxLEDEntry 3 } jnxLEDL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The level two index of the associated table that this entry is related. Zero if unavailable or inapplicable." ::= { jnxLEDEntry 4 } jnxLEDL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The level three index of the associated table that this entry is related. Zero if unavailable or inapplicable." ::= { jnxLEDEntry 5 } jnxLEDOriginator OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The originator of the this entry." ::= { jnxLEDEntry 6 } jnxLEDDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The name or detailed description of this subject." ::= { jnxLEDEntry 7 } jnxLEDState OBJECT-TYPE SYNTAX INTEGER { other(1), -- unknown or unavailable green(2), -- ok, good, normally working, -- or on-line as a standby backup if -- there is an active primary yellow(3), -- alarm, warning, marginally working red(4), -- alert, failed, not working blue(5), -- ok, on-line as an active primary amber(6) -- alarm, off-line, not running } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of the LED indicator." ::= { jnxLEDEntry 8 } jnxLEDStateOrdered OBJECT-TYPE SYNTAX INTEGER { blue(1), -- ok, on-line as an active primary green(2), -- ok, good, normally working, -- or on-line as a standby backup if -- there is an active primary amber(3), -- alarm, off-line, not running yellow(4), -- alarm, warning, marginally working red(5), -- alert, failed, not working other(6) -- unknown or unavailable } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The state of the LED indicator. Identical to jnxLEDState, but with enums ordered from 'most operational' to 'least operational' states." ::= { jnxLEDEntry 9 } -- -- Box Filled Status Table -- -- This table show the empty/filled status of the container in the -- box containers table. -- jnxFilledLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the box filled status table last changed. Zero if unknown or already at that state when the agent was up." ::= { jnxBoxAnatomy 11 } jnxFilledTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFilledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filled status entries." ::= { jnxBoxAnatomy 12 } jnxFilledEntry OBJECT-TYPE SYNTAX JnxFilledEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of filled status table." INDEX { jnxFilledContainerIndex, jnxFilledL1Index, jnxFilledL2Index, jnxFilledL3Index } ::= { jnxFilledTable 1 } JnxFilledEntry ::= SEQUENCE { jnxFilledContainerIndex Integer32, jnxFilledL1Index Integer32, jnxFilledL2Index Integer32, jnxFilledL3Index Integer32, jnxFilledDescr DisplayString, jnxFilledState INTEGER, jnxFilledChassisId JnxChassisId, jnxFilledChassisDescr DisplayString } jnxFilledContainerIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxContainersIndex in the jnxContainersTable." ::= { jnxFilledEntry 1 } jnxFilledL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFilledEntry 2 } jnxFilledL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFilledEntry 3 } jnxFilledL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index of the container housing this subject. Zero if unavailable or inapplicable." ::= { jnxFilledEntry 4 } jnxFilledDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFilledEntry 5 } jnxFilledState OBJECT-TYPE SYNTAX INTEGER { unknown(1), empty(2), filled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The filled state of this subject." ::= { jnxFilledEntry 6 } jnxFilledChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFilledEntry 7 } jnxFilledChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFilledEntry 8 } -- -- Box Operating Status Table -- -- This table reveals the operating status of some subjects -- of interest in the box contents table. -- jnxOperatingTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxOperatingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of operating status entries." ::= { jnxBoxAnatomy 13 } jnxOperatingEntry OBJECT-TYPE SYNTAX JnxOperatingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of operating status table." INDEX { jnxOperatingContentsIndex, jnxOperatingL1Index, jnxOperatingL2Index, jnxOperatingL3Index } ::= { jnxOperatingTable 1 } JnxOperatingEntry ::= SEQUENCE { jnxOperatingContentsIndex Integer32, jnxOperatingL1Index Integer32, jnxOperatingL2Index Integer32, jnxOperatingL3Index Integer32, jnxOperatingDescr DisplayString, jnxOperatingState INTEGER, jnxOperatingTemp Gauge32, jnxOperatingCPU Gauge32, jnxOperatingISR Gauge32, jnxOperatingDRAMSize Integer32, jnxOperatingBuffer Gauge32, jnxOperatingHeap Gauge32, jnxOperatingUpTime TimeInterval, jnxOperatingLastRestart TimeStamp, jnxOperatingMemory Integer32, jnxOperatingStateOrdered INTEGER, jnxOperatingChassisId JnxChassisId, jnxOperatingChassisDescr DisplayString, jnxOperatingRestartTime DateAndTime, jnxOperating1MinLoadAvg Gauge32, jnxOperating5MinLoadAvg Gauge32, jnxOperating15MinLoadAvg Gauge32 } jnxOperatingContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxContentsContainerIndex in the jnxContentsTable." ::= { jnxOperatingEntry 1 } jnxOperatingL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 2 } jnxOperatingL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 3 } jnxOperatingL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 4 } jnxOperatingDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxOperatingEntry 5 } jnxOperatingState OBJECT-TYPE SYNTAX INTEGER { unknown(1), running(2), -- up and running, -- as a active primary ready(3), -- ready to run, not running yet reset(4), -- held in reset, not ready yet runningAtFullSpeed(5), -- valid for fans only down(6), -- down or off, for power supply standby(7) -- running as a standby backup } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this subject." ::= { jnxOperatingEntry 6 } jnxOperatingTemp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 7 } jnxOperatingCPU OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 8 } jnxOperatingISR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization in percentage of this subject spending in interrupt service routine (ISR). Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 9 } jnxOperatingDRAMSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The DRAM size in bytes of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 10 } jnxOperatingBuffer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 11 } jnxOperatingHeap OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The heap utilization in percentage of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 12 } jnxOperatingUpTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time interval in 10-millisecond period that this subject has been up and running. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 13 } jnxOperatingLastRestart OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject last restarted. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 14 } jnxOperatingMemory OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The installed memory size in Megabytes of this subject. Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 15 } jnxOperatingStateOrdered OBJECT-TYPE SYNTAX INTEGER { running(1), -- up and running, -- as a active primary standby(2), -- running as a standby backup ready(3), -- ready to run, not running yet runningAtFullSpeed(4), -- valid for fans only reset(5), -- held in reset, not ready yet down(6), -- down or off, for power supply unknown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operating state of this subject. Identical to jnxOperatingState, but with enums ordered from 'most operational' to 'least operational' states." ::= { jnxOperatingEntry 16 } jnxOperatingChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxOperatingEntry 17 } jnxOperatingChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxOperatingEntry 18 } jnxOperatingRestartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this entity last restarted." ::= { jnxOperatingEntry 19 } jnxOperating1MinLoadAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 1 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 20 } jnxOperating5MinLoadAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 5 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 21 } jnxOperating15MinLoadAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU Load Average over the last 15 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable." ::= { jnxOperatingEntry 22 } -- -- Box Redundancy Information Table -- -- This table shows the internal configuration setting for the -- available redundant subsystems or components in the box. -- jnxRedundancyTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of redundancy information entries." ::= { jnxBoxAnatomy 14 } jnxRedundancyEntry OBJECT-TYPE SYNTAX JnxRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the redundancy information table." INDEX { jnxRedundancyContentsIndex, jnxRedundancyL1Index, jnxRedundancyL2Index, jnxRedundancyL3Index } ::= { jnxRedundancyTable 1 } JnxRedundancyEntry ::= SEQUENCE { jnxRedundancyContentsIndex Integer32, jnxRedundancyL1Index Integer32, jnxRedundancyL2Index Integer32, jnxRedundancyL3Index Integer32, jnxRedundancyDescr DisplayString, jnxRedundancyConfig INTEGER, jnxRedundancyState INTEGER, jnxRedundancySwitchoverCount Counter32, jnxRedundancySwitchoverTime TimeStamp, jnxRedundancySwitchoverReason INTEGER, jnxRedundancyKeepaliveHeartbeat Integer32, jnxRedundancyKeepaliveTimeout Integer32, jnxRedundancyKeepaliveElapsed Integer32, jnxRedundancyKeepaliveLoss Counter32, jnxRedundancyChassisId JnxChassisId, jnxRedundancyChassisDescr DisplayString } jnxRedundancyContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxContentsContainerIndex in the jnxContentsTable." ::= { jnxRedundancyEntry 1 } jnxRedundancyL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 2 } jnxRedundancyL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 3 } jnxRedundancyL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 4 } jnxRedundancyDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxRedundancyEntry 5 } jnxRedundancyConfig OBJECT-TYPE SYNTAX INTEGER { unknown(1), master(2), -- election priority set as a master backup(3), -- election priority set as a backup disabled(4), -- election disabled notApplicable(5) -- any among the available can be master } MAX-ACCESS read-only STATUS current DESCRIPTION "The election priority of redundancy configuration for this subject. The value 'notApplicable' means no specific instance is configured to be master or backup; whichever component boots up first becomes a master." ::= { jnxRedundancyEntry 6 } jnxRedundancyState OBJECT-TYPE SYNTAX INTEGER { unknown(1), master(2), -- master backup(3), -- backup disabled(4) -- disabled } MAX-ACCESS read-only STATUS current DESCRIPTION "The current running state for this subject." ::= { jnxRedundancyEntry 7 } jnxRedundancySwitchoverCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of switchover as perceived by this subject since routing engine is up and running. The switchover is defined as a change in state of jnxRedundancyState from master to backup or vice versa. Its value is reset when the routing engine is reset or rebooted." ::= { jnxRedundancyEntry 8 } jnxRedundancySwitchoverTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the jnxRedundancyState of this subject was last switched over from master to backup or vice versa. Zero if unknown or never switched over since the routing engine is up and running." ::= { jnxRedundancyEntry 9 } jnxRedundancySwitchoverReason OBJECT-TYPE SYNTAX INTEGER { other(1), -- others neverSwitched(2), -- never switched userSwitched(3), -- user-initiated switchover autoSwitched(4) -- automatic switchover } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason of the last switchover for this subject." ::= { jnxRedundancyEntry 10 } jnxRedundancyKeepaliveHeartbeat OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The period of sending keepalive messages between the master and backup subsystems. It is a system-wide preset value in seconds used by internal mastership resolution. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 11 } jnxRedundancyKeepaliveTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The timeout period in seconds, by the keepalive watchdog timer, before initiating a switch over to the backup subsystem. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 12 } jnxRedundancyKeepaliveElapsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time in seconds by this subject since receiving the last keepalive message from the other subsystems. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 13 } jnxRedundancyKeepaliveLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of losses on keepalive messages between the master and backup subsystems as perceived by this subject since the system is up and running. Zero if unavailable or inapplicable." ::= { jnxRedundancyEntry 14 } jnxRedundancyChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxRedundancyEntry 15 } jnxRedundancyChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxRedundancyEntry 16 } -- -- FRU (Field Replaceable Unit) Status Table -- -- This table shows the status of the FRUs in the chassis. -- jnxFruTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxFruEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of FRU status entries." ::= { jnxBoxAnatomy 15 } jnxFruEntry OBJECT-TYPE SYNTAX JnxFruEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the FRU status table." INDEX { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index } ::= { jnxFruTable 1 } JnxFruEntry ::= SEQUENCE { jnxFruContentsIndex Integer32, jnxFruL1Index Integer32, jnxFruL2Index Integer32, jnxFruL3Index Integer32, jnxFruName DisplayString, jnxFruType INTEGER, jnxFruSlot Integer32, jnxFruState INTEGER, jnxFruTemp Gauge32, jnxFruOfflineReason INTEGER, jnxFruLastPowerOff TimeStamp, jnxFruLastPowerOn TimeStamp, jnxFruPowerUpTime TimeInterval, jnxFruChassisId JnxChassisId, jnxFruChassisDescr DisplayString, jnxFruPsdAssignment Integer32 } jnxFruContentsIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The associated jnxContentsContainerIndex in the jnxContentsTable." ::= { jnxFruEntry 1 } jnxFruL1Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level one index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFruEntry 2 } jnxFruL2Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level two index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFruEntry 3 } jnxFruL3Index OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The level three index associated with this subject. Zero if unavailable or inapplicable." ::= { jnxFruEntry 4 } jnxFruName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name or detailed description of this subject." ::= { jnxFruEntry 5 } jnxFruType OBJECT-TYPE SYNTAX INTEGER { other(1), -- unknown or others clockGenerator(2), -- CG flexiblePicConcentrator(3), -- FPC switchingAndForwardingModule(4), -- SFM controlBoard(5), -- CBD, SCB routingEngine(6), -- RE powerEntryModule(7), -- PEM frontPanelModule(8), -- FPM switchInterfaceBoard(9), -- SIB processorMezzanineBoardForSIB(10), -- SPMB portInterfaceCard(11), -- PIC craftInterfacePanel(12), -- CIP fan(13), -- fan lineCardChassis(14), -- LCC forwardingEngineBoard(15), -- FEB protectedSystemDomain(16), -- PSD powerDistributionUnit(17), -- PDU powerSupplyModule(18), -- PSM switchFabricBoard(19), -- SFB adapterCard(20) -- ADC } MAX-ACCESS read-only STATUS current DESCRIPTION "The FRU type for this subject." ::= { jnxFruEntry 6 } jnxFruSlot OBJECT-TYPE SYNTAX Integer32 (0..'7fffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number of this subject. This is equivalent to jnxFruL1Index in meaning. Zero if unavailable or inapplicable." ::= { jnxFruEntry 7 } jnxFruState OBJECT-TYPE SYNTAX INTEGER { unknown(1), empty(2), present(3), ready(4), announceOnline(5), online(6), anounceOffline(7), offline(8), diagnostic(9), standby(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state for this subject." ::= { jnxFruEntry 8 } jnxFruTemp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable." ::= { jnxFruEntry 9 } jnxFruOfflineReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- unknown or other none(2), -- none error(3), -- error noPower(4), -- no power configPowerOff(5), -- configured to power off configHoldInReset(6), -- configured to hold in reset cliCommand(7), -- offlined by cli command buttonPress(8), -- offlined by button press cliRestart(9), -- restarted by cli command overtempShutdown(10), -- overtemperature shutdown masterClockDown(11), -- master clock down singleSfmModeChange(12), -- single SFM mode change packetSchedulingModeChange(13), -- packet scheduling mode change physicalRemoval(14), -- physical removal unresponsiveRestart(15), -- restarting unresponsive board sonetClockAbsent(16), -- sonet out clock absent rddPowerOff(17), -- RDD power off majorErrors(18), -- major errors minorErrors(19), -- minor errors lccHardRestart(20), -- LCC hard restart lccVersionMismatch(21), -- LCC version mismatch powerCycle(22), -- power cycle reconnect(23), -- reconnect overvoltage(24), -- overvoltage pfeVersionMismatch(25), -- PFE version mismatch febRddCfgChange(26), -- FEB redundancy cfg changed fpcMisconfig(27), -- FPC is misconfigured fruReconnectFail(28), -- FRU did not reconnect fruFwddReset(29), -- FWDD reset the fru fruFebSwitch(30), -- FEB got switched fruFebOffline(31), -- FEB was offlined fruInServSoftUpgradeError(32), -- In Service Software Upgrade Error fruChasdPowerRatingExceed(33), -- Chassis power rating exceeded fruConfigOffline(34), -- Configured offline fruServiceRestartRequest(35), -- restarting request from a service spuResetRequest(36), -- SPU reset request spuFlowdDown(37), -- SPU flowd down spuSpi4Down(38), -- SPU SPI4 down spuWatchdogTimeout(39), -- SPU Watchdog timeout spuCoreDump(40), -- SPU kernel core dump fpgaSpi4LinkDown(41), -- FPGA SPI4 link down i3Spi4LinkDown(42), -- I3 SPI4 link down cppDisconnect(43), -- CPP disconnect cpuNotBoot(44), -- CPU not boot spuCoreDumpComplete(45), -- SPU kernel core dump complete rstOnSpcSpuFailure(46), -- Rst on SPC SPU failure softRstOnSpcSpuFailure(47), -- Soft Reset on SPC SPU failure hwAuthenticationFailure(48), -- HW authentication failure reconnectFpcFail(49), -- Reconnect FPC fail fpcAppFailed(50), -- FPC app failed fpcKernelCrash(51), -- FPC kernel crash spuFlowdDownNoCore(52), -- SPU flowd down, no core dump spuFlowdCoreDumpIncomplete(53), -- SPU flowd crash with incomplete core dump spuFlowdCoreDumpComplete(54), -- SPU flowd crash with complete core dump spuIdpdDownNoCore(55), -- SPU idpd down, no core dump spuIdpdCoreDumpIncomplete(56), -- SPU idpd crash with incomplete core dump spuIdpdCoreDumpComplete(57), -- SPU idpd crash with complete core dump spuCoreDumpIncomplete(58), -- SPU kernel crash with incomplete core dump spuIdpdDown(59), -- SPU idpd down fruPfeReset(60), -- PFE reset fruReconnectNotReady(61), -- FPC not ready to reconnect fruSfLinkDown(62), -- FE - Fabric links down fruFabricDown(63), -- Fabric transitioned from up to down fruAntiCounterfeitRetry(64), -- FPC offlined due to Anti Counterfeit Retry fruFPCChassisClusterDisable(65), -- FPC offlined due to Chassis Cluster Disable spuFipsError(66), -- SPU fips error fruFPCFabricDownOffline(67), -- FPC offlined due to Fabric down febCfgChange(68), -- FEB config change routeLocalizationRoleChange(69), -- Route localization role change fruFpcUnsupported(70), -- FPC unsupported psdVersionMismatch(71), -- PSD version mismatch fruResetThresholdExceeded(72), -- FRU Reset Threshold Exceeded picBounce(73), -- PIC Bounce badVoltage(74), -- bad voltage fruFPCReducedFabricBW(75), -- FPC offlined due to Reduced Fabric Bandwidth fruAutoheal(76), -- FRU offlined due to software autoheal action builtinPicBounce(77), -- Builtin PIC Bounce fruFabricDegraded(78), -- Fabric running in degraded state fruFPCFabricDegradedOffline(79), -- FPC offlined due to degraded fabric action fruUnsupportedSlot(80), -- FRU unsupported in the current slot fruRouteLocalizationMisCfg(81), -- Route Localization - FPC Misconfiguration fruTypeConfigMismatch(82), -- FRU Type configuration mismatch lccModeChanged(83), -- LCC mode changed on the SFC hwFault(84), -- Hardware fault fruPICOfflineOnEccErrors(85), -- PIC offlined on ecc errors cross ceratins limit. fruFpcIncompatible(86), -- FPC imcompatible with other FPCs fruFpcFanTrayPEMIncompatible(87),-- FPC incompatible with FAN-TRAYs ,PEMs fruUnsupportedFirmware(88), -- Firmware on this FRU not supported openflowConfigChange(89), -- Openflow config change offlines FPC fruFpcScbIncompatible(90), -- FPC incompatible with SCB fruReUnresponsive(91), -- Corresponding slot RE unresponsive hwError(92), -- Hardware error fruErrorManagerReqFPCReset(93), -- Error manager requested FPC reset. fruIncompatibleWithPEM(94), -- FRU incompatible with power supply fruIncompatibleWithSIB(95), -- FRU incompatible with SIB sibIncompatibleWithOtherSIB(96), -- FRU incompatible with other SIB fruPfeErrors(97) -- PIC offlined on PFE Errors cross limit. } MAX-ACCESS read-only STATUS current DESCRIPTION "The offline reason of this subject." ::= { jnxFruEntry 10 } jnxFruLastPowerOff OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject was last powered off. Zero if unavailable or inapplicable." ::= { jnxFruEntry 11 } jnxFruLastPowerOn OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this subject was last powered on. Zero if unavailable or inapplicable." ::= { jnxFruEntry 12 } jnxFruPowerUpTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval in 10-millisecond period that this subject has been up and running since the last power on time. Zero if unavailable or inapplicable." ::= { jnxFruEntry 13 } jnxFruChassisId OBJECT-TYPE SYNTAX JnxChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the chassis on which the contents of this row exists." ::= { jnxFruEntry 14 } jnxFruChassisDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the chassis on which the contents of this row exists." ::= { jnxFruEntry 15 } jnxFruPsdAssignment OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The PSD assignment of this subject. Zero if unavailable or not applicable." ::= { jnxFruEntry 16 } -- -- definition of Kernel Memory Used related stuff -- jnxBoxKernelMemoryUsedPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable." ::= { jnxBoxAnatomy 16 } -- -- definition of system domain information -- jnxBoxSystemDomainType OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), rootSystemDomain(2), protectedSystemDomain(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The system domain type of this subject, notApplicable will be returned if this feature is not supported." ::= { jnxBoxAnatomy 17 } -- -- Applicable only for MidRangius Systems (MX5/10/40) -- jnxBoxPersonality OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The personality of the box, indicating which product line it is currently acting as for example, 'MX40'." ::= { jnxBoxAnatomy 18 } -- -- definition of chassis related traps -- -- Traps for chassis alarm conditions jnxPowerSupplyFailure NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxPowerSupplyFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has been in the failure (bad DC output) condition." ::= { jnxChassisTraps 1 } jnxFanFailure NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition." ::= { jnxChassisTraps 2 } jnxOverTemperature NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingTemp } STATUS current DESCRIPTION "A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition." ::= { jnxChassisTraps 3 } jnxRedundancySwitchover NOTIFICATION-TYPE OBJECTS { jnxRedundancyContentsIndex, jnxRedundancyL1Index, jnxRedundancyL2Index, jnxRedundancyL3Index, jnxRedundancyDescr, jnxRedundancyConfig, jnxRedundancyState, jnxRedundancySwitchoverCount, jnxRedundancySwitchoverTime, jnxRedundancySwitchoverReason } STATUS current DESCRIPTION "A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa." ::= { jnxChassisTraps 4 } jnxFruRemoval NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis." ::= { jnxChassisTraps 5 } jnxFruInsertion NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis." ::= { jnxChassisTraps 6 } jnxFruPowerOff NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot, jnxFruOfflineReason, jnxFruLastPowerOff, jnxFruLastPowerOn } STATUS current DESCRIPTION "A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis." ::= { jnxChassisTraps 7 } jnxFruPowerOn NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot, jnxFruOfflineReason, jnxFruLastPowerOff, jnxFruLastPowerOn } STATUS current DESCRIPTION "A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis." ::= { jnxChassisTraps 8 } jnxFruFailed NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due toi some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced." ::= { jnxChassisTraps 9 } jnxFruOffline NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot, jnxFruOfflineReason, jnxFruLastPowerOff, jnxFruLastPowerOn } STATUS current DESCRIPTION "A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone offline in the chassis." ::= { jnxChassisTraps 10 } jnxFruOnline NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis." ::= { jnxChassisTraps 11 } jnxFruCheck NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis." ::= { jnxChassisTraps 12 } jnxFEBSwitchover NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFEBSwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FEB (Forwarding Engine Board) has switched over." ::= { jnxChassisTraps 13 } jnxHardDiskFailed NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxHardDiskFailed trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has encountered some operational errors and gone into failed state in the chassis." ::= { jnxChassisTraps 14 } jnxHardDiskMissing NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A DiskMissing trap signifies that the SNMP entity, acting in an agent role, has detected that hard disk in the specified outing Engine is missing from boot device list." ::= { jnxChassisTraps 15 } jnxBootFromBackup NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxBootFromBackup trap signifies that the SNMP entity, acting in an agent role, has detected that the specified routing-engine/member has booted from the back up root partition" ::= { jnxChassisTraps 16 } jnxFmLinkErr NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A LinkErr trap signifies that the SNMP entity, acting in an agent role, has detected link errors." ::= { jnxChassisTraps 17 } jnxFmCellDropErr NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A CellDropErr trap signifies that the SNMP entity, acting in an agent role, has detected cell drop errors." ::= { jnxChassisTraps 18 } jnxExtSrcLockLost NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A ExtSrcLockLost trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been lost." ::= { jnxChassisTraps 19 } jnxPlaneOffline NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot, jnxFruOfflineReason, jnxFruLastPowerOff, jnxFruLastPowerOn } STATUS current DESCRIPTION "A jnxPlaneOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has gone offline in the chassis." ::= { jnxChassisTraps 20 } jnxPlaneOnline NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxPlaneOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric Plane has gone online in the chassis." ::= { jnxChassisTraps 21 } jnxPlaneCheck NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into check state in the chassis." ::= { jnxChassisTraps 22 } jnxPlaneFault NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into fault state in the chassis." ::= { jnxChassisTraps 23 } jnxPowerSupplyInputFailure NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxPowerSupplyInputFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has been in the failure condition." ::= { jnxChassisTraps 24 } -- Traps for chassis alarm cleared conditions jnxPowerSupplyOK NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition." ::= { jnxChassisOKTraps 1 } jnxFanOK NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition." ::= { jnxChassisOKTraps 2 } jnxTemperatureOK NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingTemp } STATUS current DESCRIPTION "A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition." ::= { jnxChassisOKTraps 3 } jnxFruOK NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis." ::= { jnxChassisOKTraps 4 } jnxExtSrcLockAcquired NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A ExtSrcLockAcquired trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been acquired." ::= { jnxChassisOKTraps 5 } jnxHardDiskOK NOTIFICATION-TYPE OBJECTS { jnxFruContentsIndex, jnxFruL1Index, jnxFruL2Index, jnxFruL3Index, jnxFruName, jnxFruType, jnxFruSlot } STATUS current DESCRIPTION "A jnxHardDiskOK trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has recovered from the failure condition." ::= { jnxChassisOKTraps 6 } jnxPowerSupplyInputOK NOTIFICATION-TYPE OBJECTS { jnxContentsContainerIndex, jnxContentsL1Index, jnxContentsL2Index, jnxContentsL3Index, jnxContentsDescr, jnxOperatingState } STATUS current DESCRIPTION "A jnxPowerSupplyInputOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has recovered from the failure condition." ::= { jnxChassisOKTraps 7 } END