-- Changes for RFC1233 (DS3 MIB): -- Changes from RFC-1239 applied which include: -- removing import of experimental, -- adding import of transmission, changing -- ds3 to be { transmission 30 } -- instead of { experimental 15 } -- Changed defintions and references from "DS3" to "Ds3" for -- the following: DS3ConfigEntry, DS3IntervalEntry, -- DS3CurrentEntry, DS3TotalEntry -- Question: should the description for ds3SendCode say -- "DS3" instead of "DS1"? -- dperkins@scruznet.com RFC1233-MIB DEFINITIONS ::= BEGIN -- RFC1233 -- May 91 IMPORTS Counter FROM RFC1155-SMI DisplayString, transmission FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- this is the MIB module for the DS3 objects ds3 OBJECT IDENTIFIER ::= { transmission 30 } -- the DS3 Configuration group -- Although the objects in this group are read-only, at -- the agent's discretion they may be made read-write -- so that the management station, when appropriately -- authorized, may change the behavior of the CSU, -- e.g., to place the device into a loopback state. -- Implementation of this group is mandatory for all -- systems that attach to a DS3 Interface. ds3ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Ds3 Configuration table." ::= { ds3 1 } ds3ConfigEntry OBJECT-TYPE SYNTAX Ds3ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Ds3 Configuration table." INDEX { ds3CSUIndex } ::= { ds3ConfigTable 1 } Ds3ConfigEntry ::= SEQUENCE { ds3CSUIndex INTEGER, ds3Index INTEGER, ds3TimeElapsed INTEGER (1..900), ds3ValidIntervals INTEGER (0..96), ds3LineType INTEGER, ds3ZeroCoding INTEGER, ds3Loopback INTEGER, ds3SendCode INTEGER, ds3YellowAlarm INTEGER, ds3RedAlarm INTEGER, ds3CircuitIdentifier DisplayString (SIZE (0..255)) } ds3CSUIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the CSU to which this entry is applicable." ::= { ds3ConfigEntry 1 } ds3Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies a DS3 Interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance." ::= { ds3ConfigEntry 2 } ds3TimeElapsed OBJECT-TYPE SYNTAX INTEGER (1..900) ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds, including partial seconds, that have elapsed since the beginning of the current error-measurement period." ::= { ds3ConfigEntry 3 } ds3ValidIntervals OBJECT-TYPE SYNTAX INTEGER (0..96) ACCESS read-only STATUS mandatory DESCRIPTION "The number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the CSU has been online." ::= { ds3ConfigEntry 4 } ds3LineType OBJECT-TYPE SYNTAX INTEGER { other(1), ds3M23(2), ds3SYNTRAN(3), ds3CbitParity(4), ds3ClearChannel(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the variety of DS3 C-bit application implementing this circuit. The type of circuit affects the interpretation of the usage and error statistics. The rate of all of them is 44.736 Mbps. The values, in sequence, describe: TITLE: SPECIFICATION: ds3M23 ANSI T1.107-1988 [10] ds3SYNTRAN ANSI T1.107-1988 [10] ds3C-bitParity ANSI T1.107a-1989 [10a] ds3ClearChannel ANSI T1.102-1987 [9] " ::= { ds3ConfigEntry 5 } ds3ZeroCoding OBJECT-TYPE SYNTAX INTEGER { ds3other(1), ds3B3ZS(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. ds3B3ZS refers to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length." ::= { ds3ConfigEntry 6 } ds3Loopback OBJECT-TYPE SYNTAX INTEGER { ds3NoLoop(1), ds3LocalLoopbackLocalSide(2), ds3LocalLoopbackRemoteSide(3), ds3RemoteLoopbackLocalSide(4), ds3RemoteLoopbackRemoteSide(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state that the CSU does not support. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on either interface shall always return this as it's value. ds3LocalLoopbackLocalSide Signal received from the local side of the device is looped back at the local connector (eg, without involving the CSU). ds3LocalLoopbackRemoteSide Signal received from the local side of the device is looped back at the remote connector (eg, through the CSU). ds3RemoteLoopbackLocalSide Signal received from the remote side of the device is looped back at the local connector (eg, through the CSU). ds3RemoteLoopbackRemoteSide Signal received from the remote side of the device is looped back at the remote connector (eg, without involving the CSU). Note that M23 and ClearChannel interfaces do not support the Loopback managed object." ::= { ds3ConfigEntry 7 } ds3SendCode OBJECT-TYPE SYNTAX INTEGER { ds3SendTestMessage(1), ds3SendNoCode(2), ds3SendSetCode(3), ds3SendLoopbackCode(4), ds3SendResetCode(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates what type of code is being sent across the DS1 circuit by the CSU. The values mean: ds3SendNoCode sending looped or normal data ds3SendSetCode sending a loopback request ds3SendLoopbackCode sending the code to choose a specific loopback ds3SendResetCode sending a loopback termination request ds3SendTestMessage sending a Test pattern as defined in T1.107a-1989 [10a]. " ::= { ds3ConfigEntry 8 } ds3YellowAlarm OBJECT-TYPE SYNTAX INTEGER { ds3YellowAlarm(1), ds3NoYellowAlarm(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if a Yellow Alarm condition exists." ::= { ds3ConfigEntry 9 } ds3RedAlarm OBJECT-TYPE SYNTAX INTEGER { ds3RedAlarm(1), ds3NoRedAlarm(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if a Red Alarm condition exists." ::= { ds3ConfigEntry 10 } ds3CircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { ds3ConfigEntry 11 } -- the DS3 Interval group -- Implementation of this group is mandatory for all -- systems that attach to a DS3 interface. -- The DS3 Interval Table contains various statistics -- collected by each CSU over the previous 24 hours of -- operation. The past 24 hours are broken into 96 -- completed 15 minute intervals. ds3IntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3 Interval table." ::= { ds3 2 } ds3IntervalEntry OBJECT-TYPE SYNTAX Ds3IntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3 Interval table." INDEX { ds3IntervalIndex, ds3IntervalNumber } ::= { ds3IntervalTable 1 } Ds3IntervalEntry ::= SEQUENCE { ds3IntervalIndex INTEGER, ds3IntervalNumber INTEGER (1..96), ds3IntervalESs Counter, ds3IntervalSESs Counter, ds3IntervalSEFSs Counter, ds3IntervalUASs Counter, ds3IntervalCSSs Counter, ds3IntervalBPVs Counter, ds3IntervalCVs Counter } ds3IntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance." ::= { ds3IntervalEntry 1 } ds3IntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..96) ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid)." ::= { ds3IntervalEntry 2 } ds3IntervalESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 3 } ds3IntervalSESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 4 } ds3IntervalSEFSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 5 } ds3IntervalUASs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 6 } ds3IntervalCSSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible." ::= { ds3IntervalEntry 7} ds3IntervalBPVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 8 } ds3IntervalCVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, intervals." ::= { ds3IntervalEntry 9 } -- the DS3 Current group -- Implementation of this group is mandatory for all systems -- that attach to a DS3 Interface. -- The DS3 current table contains various statistics being -- collected for the current 15 minute interval. ds3CurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3 Current table." ::= { ds3 3 } ds3CurrentEntry OBJECT-TYPE SYNTAX Ds3CurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3 Current table." INDEX { ds3CurrentIndex } ::= { ds3CurrentTable 1 } Ds3CurrentEntry ::= SEQUENCE { ds3CurrentIndex INTEGER, ds3CurrentESs Counter, ds3CurrentSESs Counter, ds3CurrentSEFSs Counter, ds3CurrentUASs Counter, ds3CurrentCSSs Counter, ds3CurrentBPVs Counter, ds3CurrentCVs Counter } ds3CurrentIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance." ::= { ds3CurrentEntry 1 } ds3CurrentESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 2 } ds3CurrentSESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 3 } ds3CurrentSEFSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 4 } ds3CurrentUASs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 5 } ds3CurrentCSSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible." ::= { ds3CurrentEntry 6 } ds3CurrentBPVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 7} ds3CurrentCVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval." ::= { ds3CurrentEntry 8 } -- the DS3 Total group -- Implementation of this group is mandatory for all systems -- that attach to a DS3. -- The DS3 Total Table contains the cumulative sum of the -- various statistics for the 24 hour interval preceding the -- first valid interval in the DS3CurrentTable. ds3TotalTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DS3 Total table. 24 hour interval." ::= { ds3 4 } ds3TotalEntry OBJECT-TYPE SYNTAX Ds3TotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the DS3 Total table." INDEX { ds3TotalIndex } ::= { ds3TotalTable 1 } Ds3TotalEntry ::= SEQUENCE { ds3TotalIndex INTEGER, ds3TotalESs Counter, ds3TotalSESs Counter, ds3TotalSEFSs Counter, ds3TotalUASs Counter, ds3TotalCSSs Counter, ds3TotalBPVs Counter, ds3TotalCVs Counter } ds3TotalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an DS3CSUIndex object instance." ::= { ds3TotalEntry 1 } ds3TotalESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 2 } ds3TotalSESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 3 } ds3TotalSEFSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 4 } ds3TotalUASs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 5 } ds3TotalCSSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval. Note that SYNTRAN interfaces are the only interfaces that support the Controlled Slip Seconds managed object. Accordingly, agents configured with non-SYNTRAN interfaces may treat this object as having an ACCESS clause value of not-accessible." ::= { ds3TotalEntry 6 } ds3TotalBPVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 7 } ds3TotalCVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval." ::= { ds3TotalEntry 8 } END