pandorafms/pandora_console/attachment/mibs/ARUBA-TC

1076 lines
25 KiB
Plaintext

--- ArubaOS 6.5.2.0_59123
-- vim:set ts=4 sw=4:
ARUBA-TC DEFINITIONS ::= BEGIN
IMPORTS
ObjectSyntax, TimeTicks, Integer32
FROM SNMPv2-SMI;
-- definition of textual conventions
ArubaEnableValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Flag which is either Enabled or Disabled."
SYNTAX INTEGER { enabled(1), disabled(2) }
ArubaFrameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Frame type."
SYNTAX INTEGER {
associateRequest(0),
associateResponse(1),
reassociateRequest(2),
reassociateResponse(3),
probeRequest(4),
probeResponse(5),
beacon(8),
atim(9),
disassociate(10),
auth(11),
deauth(12)
}
ArubaPhyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the PHY-type of the access point or client. Wired clients will
show 'wired' in user MIB entries.
"
SYNTAX INTEGER {
dot11a(1),
dot11b(2),
dot11g(3),
dot11ag(4),
wired(5)
}
ArubaHTMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the HT status of the access point or client.
"
SYNTAX INTEGER {
none(1),
ht20(2),
ht40(3),
vht20(4),
vht40(5),
vht80(6),
vht160(7),
vht80plus80(8)
}
ArubaHTExtChannel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the extension channel offset relative to the current channel."
SYNTAX INTEGER {
none(1),
above(2),
below(3),
eighty(4)
}
ArubaMonEncryptionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the encryption type supported by the access point."
SYNTAX INTEGER {
open(0),
wep(1),
wpa(2),
wpa2(3)
}
ArubaMonEncryptionCipher ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the WPA encryption cipher supported by the access point."
SYNTAX INTEGER {
none(0),
wep40(1),
wep104(2),
tkip(3),
aesccmp(4),
other(5)
}
ArubaMonAuthAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the WPA authentication algorithm supported by the access point."
SYNTAX INTEGER {
none(0),
psk(1),
dot1x(2),
other(3)
}
ArubaSwitchRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the role of the controller"
SYNTAX INTEGER {
master(1),
local(2),
backupmaster(3)
}
ArubaSupportStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents if a feature is supported or unsupported."
SYNTAX INTEGER {
unsupported(1),
supported(2)
}
ArubaActiveState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents if a feature is active or inactive."
SYNTAX INTEGER {
active(1),
inactive(2)
}
ArubaACLDomain ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents both the source and destination to which an ACL rule will
be applied.
"
SYNTAX INTEGER {
alias(1),
any(2),
user(3),
host(4),
network(5)
}
ArubaACLNetworkServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the network service in an ACL Rule."
SYNTAX INTEGER {
alias(1),
any(2),
tcp(3),
udp(4),
protocol(5)
}
ArubaACLAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Actions in an ACL rule."
SYNTAX INTEGER {
deny(1),
permit(2),
srcNAT(3),
dstNAT(4),
redirect(5)
}
ArubaDaysOfWeek ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Actions in an ACL rule."
SYNTAX INTEGER {
sun(1),
mon(2),
tue(3),
wed(4),
thu(5),
fri(6),
sat(7)
}
ArubaAuthenticationMethods ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Authentication Method."
SYNTAX INTEGER {
none(0),
web(1),
mac(2),
vpn(3),
dot1x(4),
kerberos(5),
secureId(7),
pubcookie(15),
xSec(16),
xSecMachine(17),
via-vpn(28),
other(255)
}
ArubaSubAuthenticationMethods ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Sub Authentication Method (e.g. EAP type)."
SYNTAX INTEGER {
authPAP(1),
authCHAP(2),
authMSCHAP(3),
authMSCHAPv2(4),
eapTLS(5),
eapTTLS(6),
eapLEAP(7),
eapMD5(8),
eapPEAP(9)
}
ArubaEncryptionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Encryption Method."
SYNTAX INTEGER {
none(0),
static-wep(1),
dynamic-wep(2),
wpa-psk-tkip(3),
wpa-tkip(4),
wpa-psk-aes(5),
wpa-aes(6),
wpa2-psk-tkip(7),
wpa2-tkip(8),
wpa2-psk-aes(9),
wpa2-aes(10),
xSec(11),
bSec-128(12),
bSec-256(13),
aes-128-cmac(14),
unknown(15)
}
ArubaUserForwardMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" User Forwarding Mode."
SYNTAX INTEGER {
tunnel-encrypted(0),
bridge(1),
tunnel-decrypted(2),
split-tunnel(3)
}
ArubaRogueApType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Rogue AP Type. "
SYNTAX INTEGER {
valid(1),
interfering(2),
unsecure(3),
dos(4),
unknown(5),
knownInterfering(6),
suspectedUnsecure(7)
}
ArubaAPMatchType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the match type of a suspected rogue AP. "
SYNTAX INTEGER {
unknown(0),
configuredWiredMac(1),
ethernetWiredMac(2),
apWiredMac(3),
externalWiredMac(4),
manual(5),
baseBSSIDOverride(6),
mms(7),
ethernetGatewayWiredMac(8),
classificationDisabled(9),
apBSSID(10),
propagatedEthernetWiredMac(11),
apRule(12),
systemWiredMac(13),
systemGatewayMac(14)
}
ArubaAPMatchMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the match method of a suspected rogue AP. "
SYNTAX INTEGER {
notApplicable(0),
exactMatch(1),
plusOneMatch(2),
minusOneMatch(3),
ouiMatch(4)
}
ArubaStationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the station type. "
SYNTAX INTEGER {
unknown(0),
valid(1),
interfering(2),
dos(3)
}
ArubaEncryptionMethods ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Actions in an ACL rule."
SYNTAX BITS{
disabled(0),
static-wep(1),
dynamic-wep(2),
static-wpa(3),
dynamic-wpa(4),
wpa2-psk-aes(5),
wpa2-8021x-aes(6),
wpa2PreAuth(7),
xsec(8),
wpa-psk-aes(9),
wpa-aes(10),
wpa2-psk-tkip(11),
wpa2-8021x-tkip(12)
}
ArubaHashAlgorithms ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Actions in an ACL rule."
SYNTAX INTEGER {
md5(1),
sha(2)
}
ArubaVlanValidRange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Valid Vlan Id Range."
SYNTAX INTEGER(1..4095)
ArubaPortMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the controller port mode."
SYNTAX INTEGER {
access(1),
dot1q(2)
}
ArubaDot1dState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the controller port spanning tree state."
SYNTAX INTEGER {
disabled(1),
blocked(2),
listening(3),
learning(4),
forwarding(5)
}
ArubaAPDot1dState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the AP port spanning tree state."
SYNTAX INTEGER {
notAvailable(1),
off(2),
disabled(3),
listening(4),
learning(5),
forwarding(6),
blocking(7)
}
ArubaPoeState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the POE mode."
SYNTAX INTEGER {
disabled(1),
enabled(2),
enabledCisco(3),
notAvailable(4)
}
ArubaCardType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Type of the hardware module.
"
SYNTAX INTEGER {
lc1(1),
lc2(2),
sc1(3),
sc2(4),
sw2400(5),
sw800(6),
sw200(7),
m3mk1(8),
sw3200(9),
sw3400(10),
sw3600(11),
sw650(12),
sw651(13),
reserved1(14),
reserved2(15),
sw620(16),
sw7210(17),
sw7220(18),
sw7240(19),
sw3500(20),
sw2500(21),
sw1500(22),
sw7010(23),
sw7005(24),
sw7030(25),
sw7110(26)
}
ArubaESIServerMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The mode of the ESI server.
"
SYNTAX INTEGER {
bridged(1),
routed(2),
nat(3)
}
ArubaESIServerStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The status of the ESI server.
"
SYNTAX INTEGER {
up(1),
down(2)
}
ArubaIfType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The type of interface referred to by the value of ifIndex.
"
SYNTAX INTEGER {
port(1),
vlan(2),
tunnel(3),
loopback(4)
}
ArubaVoipProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The type of VoIP protocols supported.
"
SYNTAX INTEGER{
sccp(1),
svp(2),
vocera(3),
sip(9),
ua(11),
h323(13),
unknown(15)
}
ArubaAccessPointMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The mode of the access point.
"
SYNTAX INTEGER{
airMonitor(1),
accessPoint(2),
accessPointAndMonitor(3),
meshPortal(4),
meshPoint(5),
rfprotectSensor(6),
spectrumSensor(7)
}
ArubaAuthServerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The type of the auth server.
"
SYNTAX INTEGER{
internaldb(1),
radius(2),
ldap(3),
kerberos(4),
tacacs(5)
}
ArubaAddressType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Address Type.
"
SYNTAX INTEGER{
srcAddress(1),
dstAddress(2),
bssid(3)
}
ArubaBlackListReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Black List Reason.
"
SYNTAX INTEGER {
userDefined(1),
mitmAttack(2),
authFailure(3),
pingFlood(4),
sessionFlood(5),
synFlood(6),
sessionBlacklist(7),
ipSpoofing(8),
esiBlacklist(9),
other(100)
}
ArubaDBType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
DataBase Type.
"
SYNTAX INTEGER {
mssql(1),
mysql(2)
}
ArubaVrrpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
DataBase Type.
"
SYNTAX INTEGER {
initialize(1),
backup(2),
master(3)
}
ArubaOperStateValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents Operational state of an interface."
SYNTAX INTEGER { up(1), down(2), testing(3) }
ArubaAntennaSetting ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the status of the external antenna."
SYNTAX INTEGER { notPresent(1), enabled(2), disabled(3) }
ArubaAPStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The status of the access point.
"
SYNTAX INTEGER { up(1), down(2) }
ArubaPortSpeed ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Port Speed.
"
SYNTAX INTEGER { speed10Mbps(1),
speed100Mbps(2),
speed1000Mbps(3),
speedAuto(4),
speed10Gbps(5)
}
ArubaPortDuplex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Port Duplexity.
"
SYNTAX INTEGER { half(1),
full(2),
auto(3)
}
ArubaPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Port Type.
"
SYNTAX INTEGER { fastethernet(1),
gigabitethernet(2),
xgigabitethernet(3)
}
ArubaEnet1Mode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Mode of the Ethernet port on the Access Point"
SYNTAX INTEGER {
activeStandby(1),
tunnel(2),
bridge(3),
notApplicable(4),
split(5)
}
ArubaUnprovisionedStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents whether the AP is provisioned or not."
SYNTAX INTEGER {
yes(1),
no(2)
}
ArubaMonitorMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents whether the AP has any radios dedicated to monitoring."
SYNTAX INTEGER {
unknown(0),
all(1),
none(2),
mixed(3)
}
ArubaConfigurationState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Configuration Transfer Types."
SYNTAX INTEGER {
success(1),
error(2)
}
ArubaConfigurationChangeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Configuration Change Types."
SYNTAX INTEGER {
create(1),
delete(2),
modify(3)
}
ArubaCallStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The Call state.
"
SYNTAX INTEGER {
idle(0),
initiated(1),
connecting(2),
delivered(3),
connected(4),
offered(5),
alerting(6),
releasing(7),
cancelling(8),
challenging(9),
transient(10),
blockwait(11),
succ(12),
fail(13),
aborted(14),
blocked(15)
}
ArubaVoipProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
VoIP protocol used
"
SYNTAX INTEGER {
sccp(1),
svp(2),
vocera(3),
sip(9),
ua(11),
h323(13)
}
ArubaVoipRegState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
VoIP registered state
"
SYNTAX INTEGER {
unknown(0),
registering(1),
unregistering(2),
challenge(3),
registered(4),
unregistered(5)
}
ArubaVoiceCdrDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
VoIP CDR direction
"
SYNTAX INTEGER {
og(0),
ic(1)
}
ArubaVoiceCacBit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Voice CAC bit flags
"
SYNTAX BITS {
cacActiveLoadBalancing(0),
cacHighCapThresholdReached(1),
cacHandRsrvThresholdReached(2),
cacPeakCapacityReached(3)
}
ArubaMeshRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Mesh role
"
SYNTAX INTEGER {
nonmesh(0),
point(1),
portal(2)
}
ArubaHTRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents HT rate"
SYNTAX INTEGER {
unknown(0),
ht6dot5(1),
ht13(2),
ht13dot5(3),
ht15(4),
ht19dot5(5),
ht26(6),
ht27(7),
ht30(8),
ht39(9),
ht40dot5(10),
ht45(11),
ht52(12),
ht54(13),
ht58dot5(14),
ht60(15),
ht65(16),
ht78(17),
ht81(18),
ht90(19),
ht104(20),
ht108(21),
ht117(22),
ht120(23),
ht121dot5(24),
ht130(25),
ht135(26),
ht150(27),
ht162(28),
ht180(29),
ht216(30),
ht240(31),
ht243(32),
ht270(33),
ht300(34)
}
ArubaARMChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The reason for ARM based change.
"
SYNTAX INTEGER {
radarDetected(1),
radarCleared(2),
txHang(3),
txHangClear(4),
fortyMhzIntol(5),
cancel40mhzIntol(6),
fortyMhzAlign(7),
armInterference(8),
armInvalidCh(9),
armErrorThresh(10),
armNoiseThresh(11),
armEmptyCh(12),
armRogueCont(13),
armDecreasePower(14),
armIncreasePower(15),
armTurnOffRadio(16),
armTurnOnRadio(17),
armChannelQualityThresh(18)
}
ArubaAPMasterStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
AP status as seen by the master controller
(used to indicate a status change).
"
SYNTAX INTEGER {
up(1),
down(2),
move(3)
}
ArubaDot3azStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the state of Energy Efficient Ethernet (802.3az)."
SYNTAX BITS {
disabled(0),
unsupported(1),
eee100BaseTX(2),
eee1000BaseT(3),
eee10GBaseT(4),
eee1000BaseKX(5),
eee10GBaseKX4(6),
eee10GBaseKR(7)
}
ArubaThresholdResourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the Threshold Resource Types"
SYNTAX INTEGER {
dataPathCpu(0),
controlPathCpu(1),
controlPathMemory(2),
totalTunnelCapacity(3),
userCapacity(4),
noofAps(5) ,
noofLocals(6)
}
ArubaStackState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of the stack element in the stack.
primary - the stack element is in primary state.
secondary - the stack element is in secondary state.
linecard - the stack element is in linecard state.
away - the stack element is in inactive state.
primary, secondary and linecard implies active state of the stack
element."
SYNTAX INTEGER {
primary(1),
secondary(2),
linecard(3),
away(4)
}
ArubaStackChangeEvent ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify the event which caused change in topology in stack."
SYNTAX INTEGER {
other(1),
primarySlotChanged(2),
secondarySlotChanged(3),
lineCardSlotChanged(4),
roleChanged(5),
priorityChanged(6),
versionMismatch(7),
slotExceeded(8)
}
ArubaStackIfTopoJoined ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify whether an interface has joined the stacking
topology or left the topology."
SYNTAX INTEGER {
connected(1), -- An interface has joined stacking topology.
disconnected(2) -- An interface has left stacking topology.
}
InterfaceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must remain
constant at least from one re-initialization of the entity's
network management system to the next re-initialization."
SYNTAX Integer32 (1..2147483647)
ArubaIfState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify the state of an interface.
linkUp - Operational state of this interface is up.
linkDown - Operational state of this interface is down."
SYNTAX INTEGER {
linkUp(1),
linkDown(2)
}
ArubaIfStateChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify the reason for interface state change.
admin - User has explicitly issued 'shutdown' or 'no shutdown'
configuration from CLI on this interface.
loopProtect - If ifState of an interface changes to linkDown, then
it is used to specify that a loop has been detected on
this interface by loop protect mechanism.
If ifState of an interface changes to linkUp, then
it is used to specify that loop-protect error has been
cleared out on this interface through port auto-recovery
mechanism or through explicit clear error-recovery
command.
macLimit - If ifState of an interface changes to linkDown, then
it is used to specify that number of learnt MACs on this
interface exceeds the limit configured.
If ifState of an interface changes to linkUp, then it is
used to specify that mac-limit error has been cleared out
on this interface through port auto-recovery mechanism or
through explicit clear error-recovery command.
raGuard - If ifState of an interface changes to linkDown, then it
is used to specify that invalid router advertisement has
been identified on this interface, resulting shutting
down of this interface.
If ifState of an interface changes to linkUp, then it is
used to specify that raGuard error has been cleared out on
this interface through port auto-recovery mechanism or
through explicit clear error-recovery command.
bpduGuard - If ifState of an interface changes to linkDown, then it
is used to specify that BPDU is received on this interface
resulting shutting down of this interface.
If ifState of an interface changes to linkUp, then it is
used to specify that BPDU Guard error has been cleared out
on this interface through port auto-recovery mechanism or
through explicit clear error-recovery command."
SYNTAX INTEGER {
admin(1),
loopProtect(2),
macLimit(3),
raGuard(4),
bpduGuard(5)
}
ArubaAPUplinkType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
AP uplink type
"
SYNTAX INTEGER {
ethernet(1),
usb(2),
pppoe(3),
wifi(4)
}
ArubaAPUplinkChangeReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify the reason for AP uplink change.
linkFailure - The uplink went down
vpnFailure - VPN tunnel could not be sustained using the uplink
preemption - The uplink was pre-empted by a higher-priority uplink"
SYNTAX INTEGER {
linkFailure(1),
vpnFailure(2),
preemption(3)
}
ArubaPortalServerDownReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to specify the reason for Portal server down.
connectFail - Connect Portal server fail"
SYNTAX INTEGER {
connectFail(1)
}
ArubaHaRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the HA role of the Aruba controller"
SYNTAX INTEGER {
dual(0),
active(1),
standby(2),
disabled(3)
}
ArubaHaConnectivityStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the HA standby connectivity status of the Access Point"
SYNTAX INTEGER {
haSuccess(0),
haNetUnreach(1),
haCpUnreach(2),
haImageMissMatch(3),
haApDenied(4),
haHbtFailure(5),
haInvalidHelloResponse(6),
haStandbyTunnelDown(7)
}
ArubaFlexRadioMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Flex Radio Operating Mode
"
SYNTAX INTEGER {
single2GHzBand(0),
single5GHzBand(1),
dual2GHzplus5GHzBand(2),
unknown(3),
notApplicable(4)
}
END