1044 lines
38 KiB
Plaintext
1044 lines
38 KiB
Plaintext
-- *****************************************************************
|
|
-- OLD-CISCO-SYS-MIB.my: Cisco System MIB file
|
|
--
|
|
-- July 1994, Jeffrey T. Johnson
|
|
--
|
|
-- Copyright (c) 1994-1996 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
-- Prior to 10.2, Cisco's lsystem mib group contained a curious
|
|
-- assortment of mib objects. For 10.2, in order to allow similar
|
|
-- objects to be compiled separately with the mib compiler, the
|
|
-- lsystem group was separated into an envmon group (lenv), a cpu
|
|
-- group (lcpu), a memory group (lmem), and a system group (lsystem).
|
|
-- In order to preserve the OBJECT IDENTIFIERS from release 10.1 to
|
|
-- 10.2, however, all four groups are still based at { local 1 }.
|
|
-- This is fine from the mib compiler point-of-view, but causes
|
|
-- problems for some test tools which don't like the fact that
|
|
-- lsystem, lenv, lmem, and lcpu all have the same OBJECT IDENTIFIER.
|
|
-- In order to work around this problem, this file exists which
|
|
-- is a combination of the four 10.2 "system" mibs, with everything
|
|
-- falling under the lsystem group (as it did in 10.1).
|
|
--
|
|
-- This mib should only be used as a replacement for the four separate
|
|
-- system mibs (OLD-CISCO-CPU.my, OLD-CISCO-ENVMON-MIB.my,
|
|
-- OLD-CISCO-MEMORY-MIB.my, OLD-CISCO-SYSTEM-MIB.my) in test tool
|
|
-- environments. The aforementioned mibs should always be used in
|
|
-- code generation
|
|
|
|
OLD-CISCO-SYS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
local
|
|
FROM CISCO-SMI;
|
|
|
|
lsystem OBJECT IDENTIFIER ::= { local 1 }
|
|
|
|
-- Local Variable Section
|
|
|
|
-- This section describes the local variables within the cisco
|
|
-- product line. Groups may or may not be present depending
|
|
-- on the software options present in the managed device.
|
|
|
|
|
|
-- Local System Group
|
|
|
|
-- This group is present in all products.
|
|
|
|
romId OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains a printable octet
|
|
string which contains the System Bootstrap
|
|
description and version identification."
|
|
::= { lsystem 1 }
|
|
|
|
whyReload OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains a printable octet
|
|
string which contains the reason why the
|
|
system was last restarted."
|
|
::= { lsystem 2 }
|
|
|
|
hostName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable represents the name of the
|
|
host in printable ascii characters."
|
|
::= { lsystem 3 }
|
|
|
|
domainName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the domain portion of the
|
|
domain name of the host."
|
|
::= { lsystem 4 }
|
|
|
|
authAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains the last SNMP
|
|
authorization failure IP address."
|
|
::= { lsystem 5 }
|
|
|
|
bootHost OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the IP address of the host that
|
|
supplied the currently running software."
|
|
::= { lsystem 6 }
|
|
|
|
ping OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The ping mib object is obsolete as of IOS 10.2
|
|
It has been superseded by the Cisco Ping MIB"
|
|
::= { lsystem 7 }
|
|
|
|
freeMem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The freeMem mib object is obsolete as of IOS 11.1
|
|
It has been replaced with the cisco memory pool mib"
|
|
::= { lsystem 8 }
|
|
|
|
bufferElFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free buffer
|
|
elements."
|
|
::= { lsystem 9 }
|
|
|
|
bufferElMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of buffer
|
|
elements."
|
|
::= { lsystem 10 }
|
|
|
|
bufferElHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of buffer element hits."
|
|
::= { lsystem 11 }
|
|
|
|
bufferElMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of buffer element
|
|
misses."
|
|
::= { lsystem 12 }
|
|
|
|
bufferElCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of buffer element
|
|
creates."
|
|
::= { lsystem 13 }
|
|
|
|
bufferSmSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the size of small buffers."
|
|
::= { lsystem 14 }
|
|
|
|
bufferSmTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the total number of small buffers."
|
|
::= { lsystem 15 }
|
|
|
|
bufferSmFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free small buffers."
|
|
::= { lsystem 16 }
|
|
|
|
bufferSmMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of small
|
|
buffers."
|
|
::= { lsystem 17 }
|
|
|
|
bufferSmHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of small buffer hits."
|
|
::= { lsystem 18 }
|
|
|
|
bufferSmMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of small buffer misses."
|
|
::= { lsystem 19 }
|
|
|
|
bufferSmTrim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of small buffer trims."
|
|
::= { lsystem 20 }
|
|
|
|
bufferSmCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of small buffer
|
|
creates."
|
|
::= { lsystem 21 }
|
|
|
|
bufferMdSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the size of medium buffers."
|
|
::= { lsystem 22 }
|
|
|
|
bufferMdTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the total number of medium
|
|
buffers."
|
|
::= { lsystem 23 }
|
|
|
|
bufferMdFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free medium buffers."
|
|
::= { lsystem 24 }
|
|
|
|
bufferMdMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of medium
|
|
buffers."
|
|
::= { lsystem 25 }
|
|
|
|
bufferMdHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of medium buffer hits."
|
|
::= { lsystem 26 }
|
|
|
|
bufferMdMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of medium buffer
|
|
misses."
|
|
::= { lsystem 27 }
|
|
|
|
bufferMdTrim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of medium buffer trims."
|
|
::= { lsystem 28 }
|
|
|
|
bufferMdCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of medium buffer
|
|
creates."
|
|
::= { lsystem 29 }
|
|
|
|
bufferBgSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the size of big buffers."
|
|
::= { lsystem 30 }
|
|
|
|
bufferBgTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the total number of big buffers."
|
|
::= { lsystem 31 }
|
|
|
|
bufferBgFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free big buffers."
|
|
::= { lsystem 32 }
|
|
|
|
bufferBgMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of big buffers."
|
|
::= { lsystem 33 }
|
|
|
|
bufferBgHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of big buffer hits."
|
|
::= { lsystem 34 }
|
|
|
|
bufferBgMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of big buffer misses."
|
|
::= { lsystem 35 }
|
|
|
|
bufferBgTrim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of big buffer trims."
|
|
::= { lsystem 36 }
|
|
|
|
bufferBgCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of big buffer creates."
|
|
::= { lsystem 37 }
|
|
|
|
bufferLgSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the size of large buffers."
|
|
::= { lsystem 38 }
|
|
|
|
bufferLgTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the total number of large buffers."
|
|
::= { lsystem 39 }
|
|
|
|
bufferLgFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free large buffers."
|
|
::= { lsystem 40 }
|
|
|
|
bufferLgMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of large
|
|
buffers."
|
|
::= { lsystem 41 }
|
|
|
|
bufferLgHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of large buffer hits."
|
|
::= { lsystem 42 }
|
|
|
|
bufferLgMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of large buffer misses."
|
|
::= { lsystem 43 }
|
|
|
|
bufferLgTrim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of large buffer trims."
|
|
::= { lsystem 44 }
|
|
|
|
bufferLgCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of large buffer
|
|
creates."
|
|
::= { lsystem 45 }
|
|
|
|
bufferFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of buffer allocation
|
|
failures."
|
|
::= { lsystem 46 }
|
|
|
|
bufferNoMem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of the number of buffer create
|
|
failures due to no free memory."
|
|
::= { lsystem 47 }
|
|
|
|
netConfigAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the address of the host that supplied
|
|
the network-confg file."
|
|
::= { lsystem 48 }
|
|
|
|
netConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the name of the network configuration
|
|
file."
|
|
::= { lsystem 49 }
|
|
|
|
netConfigSet OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Cause the loading of a new network-confg
|
|
file using TFTP."
|
|
::= { lsystem 50 }
|
|
|
|
hostConfigAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Contains the address of the host that
|
|
provided the host-config file."
|
|
::= { lsystem 51 }
|
|
|
|
hostConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Contains the name of the last configured
|
|
host-confg file."
|
|
::= { lsystem 52 }
|
|
|
|
hostConfigSet OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS write-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Cause the loading of a new host-confg file
|
|
using TFTP."
|
|
::= { lsystem 53 }
|
|
|
|
writeMem OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Write configuration into non-volatile memory
|
|
/ erase config memory if 0."
|
|
::= { lsystem 54 }
|
|
|
|
writeNet OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Write configuration to host using TFTP."
|
|
::= { lsystem 55 }
|
|
|
|
busyPer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"CPU busy percentage in the last 5 second
|
|
period. Not the last 5 realtime seconds but
|
|
the last 5 second period in the scheduler."
|
|
::= { lsystem 56 }
|
|
|
|
avgBusy1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"1 minute exponentially-decayed moving
|
|
average of the CPU busy percentage."
|
|
::= { lsystem 57 }
|
|
|
|
avgBusy5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"5 minute exponentially-decayed moving
|
|
average of the CPU busy percentage."
|
|
::= { lsystem 58 }
|
|
|
|
idleCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"cisco internal variable. not to be used"
|
|
::= { lsystem 59 }
|
|
|
|
idleWired OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"cisco internal variable. not to be used"
|
|
::= { lsystem 60 }
|
|
|
|
ciscoContactInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"cisco's name and address"
|
|
::= { lsystem 61 }
|
|
|
|
bufferHgSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the size of huge buffers."
|
|
::= { lsystem 62 }
|
|
|
|
bufferHgTotal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the total number of huge buffers."
|
|
::= { lsystem 63 }
|
|
|
|
bufferHgFree OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of free huge buffers."
|
|
::= { lsystem 64 }
|
|
|
|
bufferHgMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the maximum number of huge
|
|
buffers."
|
|
::= { lsystem 65 }
|
|
|
|
bufferHgHit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of huge buffer hits."
|
|
::= { lsystem 66 }
|
|
|
|
bufferHgMiss OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of huge buffer misses."
|
|
::= { lsystem 67 }
|
|
|
|
bufferHgTrim OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of huge buffer trims."
|
|
::= { lsystem 68 }
|
|
|
|
bufferHgCreate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the number of huge buffer creates."
|
|
::= { lsystem 69 }
|
|
|
|
netConfigProto OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the protocol that supplied the
|
|
network-confg file."
|
|
::= { lsystem 70 }
|
|
|
|
hostConfigProto OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the protocol that supplied the host-
|
|
confg file."
|
|
::= { lsystem 71 }
|
|
|
|
sysConfigAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the address of the host that supplied
|
|
the system boot image."
|
|
::= { lsystem 72 }
|
|
|
|
sysConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the name of the system boot image."
|
|
::= { lsystem 73 }
|
|
|
|
sysConfigProto OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Holds the protocol that supplied the system
|
|
boot image."
|
|
::= { lsystem 74 }
|
|
|
|
sysClearARP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Perform a clearing of the entire ARP cache
|
|
and invalidation of route caches."
|
|
::= { lsystem 75 }
|
|
|
|
sysClearInt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS write-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Clear interface given IfIndex as value."
|
|
::= { lsystem 76 }
|
|
|
|
envPresent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is there an environmental monitor card in
|
|
this box?, 0 - No, 1-AGS card present, wrong
|
|
firmware, 2-AGS CARD present, firmware ok,
|
|
3-7000 support"
|
|
::= { lsystem 77 }
|
|
|
|
envTestPt1Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 1. Typically
|
|
ambient air or the temperature of air
|
|
entering the router"
|
|
::= { lsystem 78 }
|
|
|
|
envTestPt1Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 1. Typically a
|
|
temperature in centigrade."
|
|
::= { lsystem 79 }
|
|
|
|
envTestPt2Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 2. Typically
|
|
airflow or the temperature of air leaving the
|
|
router"
|
|
::= { lsystem 80 }
|
|
|
|
envTestPt2Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 2. Typically a
|
|
temperature in centigrade."
|
|
::= { lsystem 81 }
|
|
|
|
envTestPt3Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 3. Typically
|
|
+5 volt"
|
|
::= { lsystem 82 }
|
|
|
|
envTestPt3Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 3. Typically the
|
|
value in millivolts of the +5v supply"
|
|
::= { lsystem 83 }
|
|
|
|
envTestPt4Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 4. Typically
|
|
+12 volt"
|
|
::= { lsystem 84 }
|
|
|
|
envTestPt4Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 4. Typically the
|
|
value in millivolts of the +12v supply"
|
|
::= { lsystem 85 }
|
|
|
|
envTestPt5Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 5. Typically
|
|
-12 volt"
|
|
::= { lsystem 86 }
|
|
|
|
envTestPt5Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 5. Typically the
|
|
value in millivolts of the -12v supply"
|
|
::= { lsystem 87 }
|
|
|
|
envTestPt6Descr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of the test point 6. Typically
|
|
-5 volt"
|
|
::= { lsystem 88 }
|
|
|
|
envTestPt6Measure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current value of test point 6. Typically the
|
|
value in millivolts of the -5v supply"
|
|
::= { lsystem 89 }
|
|
|
|
envTestPt1MarginVal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value at which the router will shutdown.
|
|
Typically the ambient air temperature that
|
|
will shut the router down. (e.g. 43)"
|
|
::= { lsystem 90 }
|
|
|
|
envTestPt2MarginVal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value at which the router will shutdown.
|
|
Typically the airflow air temperature that
|
|
will shut the router down. (e.g. 58)"
|
|
::= { lsystem 91 }
|
|
|
|
envTestPt3MarginPercent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"+/- Percentage that will shut the router
|
|
down, (e.g. 10%) typically +5 volt"
|
|
::= { lsystem 92 }
|
|
|
|
envTestPt4MarginPercent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"+/- Percentage that will shut the router
|
|
down, (e.g. 15%) typically +12 volt"
|
|
::= { lsystem 93 }
|
|
|
|
envTestPt5MarginPercent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"+/- Percentage that will shut the router
|
|
down, (e.g. 15%) typically -12 volt"
|
|
::= { lsystem 94 }
|
|
|
|
envTestPt6MarginPercent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"+/- Percentage that will shut the router
|
|
down, (e.g. 10%) typically -5 volt"
|
|
::= { lsystem 95 }
|
|
|
|
envTestPt1last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt1 when last shutdown
|
|
occurred."
|
|
::= { lsystem 96 }
|
|
|
|
envTestPt2last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt2 when last shutdown
|
|
occurred."
|
|
::= { lsystem 97 }
|
|
|
|
envTestPt3last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt3 when last shutdown
|
|
occurred."
|
|
::= { lsystem 98 }
|
|
|
|
envTestPt4last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt4 when last shutdown
|
|
occurred."
|
|
::= { lsystem 99 }
|
|
|
|
envTestPt5last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt5 when last shutdown
|
|
occurred."
|
|
::= { lsystem 100 }
|
|
|
|
envTestPt6last OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Value of TestPt6 when last shutdown
|
|
occurred."
|
|
::= { lsystem 101 }
|
|
|
|
envTestPt1warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 102 }
|
|
|
|
envTestPt2warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 103 }
|
|
|
|
envTestPt3warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 104 }
|
|
|
|
envTestPt4warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 105 }
|
|
|
|
envTestPt5warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 106 }
|
|
|
|
envTestPt6warn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
warning(1),
|
|
noWarning(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Is this test point at a warning level?"
|
|
::= { lsystem 107 }
|
|
|
|
envFirmVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Description of Environmental Card firmware"
|
|
::= { lsystem 108 }
|
|
|
|
envTechnicianID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Technician ID"
|
|
::= { lsystem 109 }
|
|
|
|
envType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of environmental card"
|
|
::= { lsystem 110 }
|
|
|
|
envBurnDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The calibration / burn in date"
|
|
::= { lsystem 111 }
|
|
|
|
envSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Serial Number of environmental monitor card"
|
|
::= { lsystem 112 }
|
|
|
|
|
|
END
|