963 lines
26 KiB
Plaintext
963 lines
26 KiB
Plaintext
-- extracted from rfc2674.txt
|
|
-- at Mon Nov 15 17:12:07 1999
|
|
|
|
P-BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB for IEEE 802.1p devices
|
|
-- -------------------------------------------------------------
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64
|
|
FROM SNMPv2-SMI
|
|
TruthValue, TimeInterval, MacAddress, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
dot1dTp, dot1dTpPort, dot1dBridge,
|
|
dot1dBasePortEntry, dot1dBasePort
|
|
FROM BRIDGE-MIB;
|
|
|
|
pBridgeMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9908250000Z"
|
|
ORGANIZATION "IETF Bridge MIB Working Group"
|
|
CONTACT-INFO
|
|
" Les Bell
|
|
Postal: 3Com Europe Ltd.
|
|
3Com Centre, Boundary Way
|
|
Hemel Hempstead, Herts. HP2 7YU
|
|
UK
|
|
Phone: +44 1442 438025
|
|
Email: Les_Bell@3Com.com
|
|
|
|
Andrew Smith
|
|
Postal: Extreme Networks
|
|
3585 Monroe St.
|
|
Santa Clara CA 95051
|
|
USA
|
|
Phone: +1 408 579 2821
|
|
Email: andrew@extremenetworks.com
|
|
|
|
Paul Langille
|
|
Postal: Newbridge Networks
|
|
5 Corporate Drive
|
|
Andover, MA 01810
|
|
USA
|
|
Phone: +1 978 691 4665
|
|
Email: langille@newbridge.com
|
|
|
|
Anil Rijhsinghani
|
|
Postal: Cabletron Systems
|
|
50 Minuteman Road
|
|
Andover, MA 01810
|
|
USA
|
|
Phone: +1 978 684 1295
|
|
Email: anil@cabletron.com
|
|
|
|
Keith McCloghrie
|
|
Postal: cisco Systems, Inc.
|
|
170 West Tasman Drive
|
|
San Jose, CA 95134-1706
|
|
USA
|
|
Phone: +1 408 526 5260
|
|
Email: kzm@cisco.com"
|
|
|
|
DESCRIPTION
|
|
"The Bridge MIB Extension module for managing Priority
|
|
and Multicast Filtering, defined by IEEE 802.1D-1998."
|
|
|
|
-- revision history
|
|
|
|
REVISION "9908250000Z"
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 2674."
|
|
|
|
::= { dot1dBridge 6 }
|
|
|
|
pBridgeMIBObjects OBJECT IDENTIFIER ::= { pBridgeMIB 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
EnabledStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A simple status value for the object."
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- groups in the P-BRIDGE MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dExtBase OBJECT IDENTIFIER ::= { pBridgeMIBObjects 1 }
|
|
dot1dPriority OBJECT IDENTIFIER ::= { pBridgeMIBObjects 2 }
|
|
dot1dGarp OBJECT IDENTIFIER ::= { pBridgeMIBObjects 3 }
|
|
dot1dGmrp OBJECT IDENTIFIER ::= { pBridgeMIBObjects 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the dot1dExtBase group
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dDeviceCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
dot1dExtendedFilteringServices(0),
|
|
-- can perform filtering of
|
|
-- individual multicast addresses
|
|
-- controlled by GMRP.
|
|
dot1dTrafficClasses(1),
|
|
-- can map user priority to
|
|
-- multiple traffic classes.
|
|
|
|
dot1qStaticEntryIndividualPort(2),
|
|
-- dot1qStaticUnicastReceivePort &
|
|
-- dot1qStaticMulticastReceivePort
|
|
-- can represent non-zero entries.
|
|
dot1qIVLCapable(3), -- Independent VLAN Learning.
|
|
dot1qSVLCapable(4), -- Shared VLAN Learning.
|
|
dot1qHybridCapable(5),
|
|
-- both IVL & SVL simultaneously.
|
|
dot1qConfigurablePvidTagging(6),
|
|
-- whether the implementation
|
|
-- supports the ability to
|
|
-- override the default PVID
|
|
-- setting and its egress status
|
|
-- (VLAN-Tagged or Untagged) on
|
|
-- each port.
|
|
dot1dLocalVlanCapable(7)
|
|
-- can support multiple local
|
|
-- bridges, outside of the scope
|
|
-- of 802.1Q defined VLANs.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the optional parts of IEEE 802.1D and 802.1Q
|
|
that are implemented by this device and are manageable
|
|
through this MIB. Capabilities that are allowed on a
|
|
per-port basis are indicated in dot1dPortCapabilities."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 5.2,
|
|
IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2"
|
|
::= { dot1dExtBase 1 }
|
|
|
|
dot1dTrafficClassesEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value true(1) indicates that Traffic Classes are
|
|
enabled on this bridge. When false(2), the bridge
|
|
operates with a single priority level for all traffic."
|
|
DEFVAL { true }
|
|
::= { dot1dExtBase 2 }
|
|
|
|
dot1dGmrpStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative status requested by management for
|
|
GMRP. The value enabled(1) indicates that GMRP should
|
|
be enabled on this device, in all VLANs, on all ports
|
|
for which it has not been specifically disabled. When
|
|
disabled(2), GMRP is disabled, in all VLANs, on all
|
|
ports and all GMRP packets will be forwarded
|
|
transparently. This object affects both Applicant and
|
|
Registrar state machines. A transition from disabled(2)
|
|
to enabled(1) will cause a reset of all GMRP state
|
|
machines on all ports."
|
|
DEFVAL { enabled }
|
|
::= { dot1dExtBase 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Port Capabilities Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dPortCapabilitiesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains capabilities information about
|
|
every port that is associated with this bridge."
|
|
::= { dot1dExtBase 4 }
|
|
|
|
dot1dPortCapabilitiesEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortCapabilitiesEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of capabilities information about this port
|
|
indexed by dot1dBasePort."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { dot1dPortCapabilitiesTable 1 }
|
|
|
|
Dot1dPortCapabilitiesEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortCapabilities
|
|
BITS
|
|
}
|
|
|
|
dot1dPortCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of
|
|
-- frames and GVRP.
|
|
dot1qConfigurableAcceptableFrameTypes(1),
|
|
-- allows modified values of
|
|
-- dot1qPortAcceptableFrameTypes.
|
|
dot1qIngressFiltering(2)
|
|
-- supports the discarding of any
|
|
-- frame received on a Port whose
|
|
-- VLAN classification does not
|
|
-- include that Port in its Member
|
|
-- set.
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the parts of IEEE 802.1D and 802.1Q that are
|
|
optional on a per-port basis that are implemented by
|
|
this device and are manageable through this MIB."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 5.2,
|
|
IEEE 802.1Q/D11 Section 5.2"
|
|
::= { dot1dPortCapabilitiesEntry 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the dot1dPriority group
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Port Priority Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dPortPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port that
|
|
is associated with this transparent bridge."
|
|
::= { dot1dPriority 1 }
|
|
|
|
dot1dPortPriorityEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Default User Priorities for each port of a
|
|
transparent bridge. This is indexed by dot1dBasePort."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { dot1dPortPriorityTable 1 }
|
|
|
|
Dot1dPortPriorityEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortDefaultUserPriority
|
|
INTEGER,
|
|
dot1dPortNumTrafficClasses
|
|
INTEGER
|
|
}
|
|
|
|
dot1dPortDefaultUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default ingress User Priority for this port. This
|
|
only has effect on media, such as Ethernet, that do not
|
|
support native User Priority."
|
|
::= { dot1dPortPriorityEntry 1 }
|
|
|
|
dot1dPortNumTrafficClasses OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of egress traffic classes supported on this
|
|
port. This object may optionally be read-only."
|
|
::= { dot1dPortPriorityEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- User Priority Regeneration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dUserPriorityRegenTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dUserPriorityRegenEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Regenerated User Priorities for each received
|
|
User Priority on each port of a bridge. The Regenerated
|
|
User Priority value may be used to index the Traffic
|
|
Class Table for each input port. This only has effect
|
|
on media that support native User Priority. The default
|
|
values for Regenerated User Priorities are the same as
|
|
the User Priorities."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 6.4"
|
|
::= { dot1dPriority 2 }
|
|
|
|
dot1dUserPriorityRegenEntry OBJECT-TYPE
|
|
SYNTAX Dot1dUserPriorityRegenEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mapping of incoming User Priority to a Regenerated
|
|
User Priority."
|
|
INDEX { dot1dBasePort, dot1dUserPriority }
|
|
::= { dot1dUserPriorityRegenTable 1 }
|
|
|
|
Dot1dUserPriorityRegenEntry ::=
|
|
SEQUENCE {
|
|
dot1dUserPriority
|
|
INTEGER,
|
|
dot1dRegenUserPriority
|
|
INTEGER
|
|
}
|
|
|
|
dot1dUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The User Priority for a frame received on this port."
|
|
::= { dot1dUserPriorityRegenEntry 1 }
|
|
|
|
dot1dRegenUserPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Regenerated User Priority the incoming User
|
|
Priority is mapped to for this port."
|
|
::= { dot1dUserPriorityRegenEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Traffic Class Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dTrafficClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dTrafficClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table mapping evaluated User Priority to Traffic
|
|
Class, for forwarding by the bridge. Traffic class is a
|
|
number in the range (0..(dot1dPortNumTrafficClasses-1))."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Table 7-2"
|
|
::= { dot1dPriority 3 }
|
|
|
|
dot1dTrafficClassEntry OBJECT-TYPE
|
|
SYNTAX Dot1dTrafficClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Priority to Traffic Class mapping."
|
|
INDEX { dot1dBasePort, dot1dTrafficClassPriority }
|
|
::= { dot1dTrafficClassTable 1 }
|
|
|
|
Dot1dTrafficClassEntry ::=
|
|
SEQUENCE {
|
|
dot1dTrafficClassPriority
|
|
INTEGER,
|
|
dot1dTrafficClass
|
|
INTEGER
|
|
}
|
|
|
|
dot1dTrafficClassPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Priority value determined for the received frame.
|
|
This value is equivalent to the priority indicated in
|
|
the tagged frame received, or one of the evaluated
|
|
priorities, determined according to the media-type.
|
|
|
|
For untagged frames received from Ethernet media, this
|
|
value is equal to the dot1dPortDefaultUserPriority value
|
|
for the ingress port.
|
|
|
|
For untagged frames received from non-Ethernet media,
|
|
this value is equal to the dot1dRegenUserPriority value
|
|
for the ingress port and media-specific user priority."
|
|
::= { dot1dTrafficClassEntry 1 }
|
|
|
|
dot1dTrafficClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Traffic Class the received frame is mapped to."
|
|
::= { dot1dTrafficClassEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Outbound Access Priority Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dPortOutboundAccessPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortOutboundAccessPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table mapping Regenerated User Priority to Outbound
|
|
Access Priority. This is a fixed mapping for all port
|
|
types, with two options for 802.5 Token Ring."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Table 7-3"
|
|
::= { dot1dPriority 4 }
|
|
|
|
dot1dPortOutboundAccessPriorityEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortOutboundAccessPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Regenerated User Priority to Outbound Access Priority
|
|
mapping."
|
|
INDEX { dot1dBasePort, dot1dRegenUserPriority }
|
|
::= { dot1dPortOutboundAccessPriorityTable 1 }
|
|
|
|
Dot1dPortOutboundAccessPriorityEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortOutboundAccessPriority
|
|
INTEGER
|
|
}
|
|
|
|
dot1dPortOutboundAccessPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Outbound Access Priority the received frame is
|
|
mapped to."
|
|
::= { dot1dPortOutboundAccessPriorityEntry 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- the dot1dGarp group
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The GARP Port Table
|
|
-- -------------------------------------------------------------
|
|
dot1dPortGarpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortGarpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of GARP control information about every bridge
|
|
port. This is indexed by dot1dBasePort."
|
|
::= { dot1dGarp 1 }
|
|
|
|
dot1dPortGarpEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortGarpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GARP control information for a bridge port."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { dot1dPortGarpTable 1 }
|
|
|
|
Dot1dPortGarpEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortGarpJoinTime
|
|
TimeInterval,
|
|
dot1dPortGarpLeaveTime
|
|
TimeInterval,
|
|
dot1dPortGarpLeaveAllTime
|
|
TimeInterval
|
|
}
|
|
|
|
dot1dPortGarpJoinTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GARP Join time, in centiseconds."
|
|
DEFVAL { 20 }
|
|
::= { dot1dPortGarpEntry 1 }
|
|
|
|
dot1dPortGarpLeaveTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GARP Leave time, in centiseconds."
|
|
DEFVAL { 60 }
|
|
::= { dot1dPortGarpEntry 2 }
|
|
|
|
dot1dPortGarpLeaveAllTime OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GARP LeaveAll time, in centiseconds."
|
|
DEFVAL { 1000 }
|
|
::= { dot1dPortGarpEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The GMRP Port Configuration and Status Table
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dPortGmrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dPortGmrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of GMRP control and status information about
|
|
every bridge port. Augments the dot1dBasePortTable."
|
|
::= { dot1dGmrp 1 }
|
|
|
|
dot1dPortGmrpEntry OBJECT-TYPE
|
|
SYNTAX Dot1dPortGmrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"GMRP control and status information for a bridge port."
|
|
AUGMENTS { dot1dBasePortEntry }
|
|
::= { dot1dPortGmrpTable 1 }
|
|
|
|
Dot1dPortGmrpEntry ::=
|
|
SEQUENCE {
|
|
dot1dPortGmrpStatus
|
|
EnabledStatus,
|
|
dot1dPortGmrpFailedRegistrations
|
|
Counter32,
|
|
dot1dPortGmrpLastPduOrigin
|
|
MacAddress
|
|
}
|
|
|
|
dot1dPortGmrpStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of GMRP operation on this port. The
|
|
value enabled(1) indicates that GMRP is enabled on this port
|
|
in all VLANs as long as dot1dGmrpStatus is also enabled(1).
|
|
A value of disabled(2) indicates that GMRP is disabled on
|
|
this port in all VLANs: any GMRP packets received will
|
|
be silently discarded and no GMRP registrations will be
|
|
propagated from other ports. Setting this to a value of
|
|
enabled(1) will be stored by the agent but will only take
|
|
effect on the GMRP protocol operation if dot1dGmrpStatus
|
|
also indicates the value enabled(1). This object affects
|
|
all GMRP Applicant and Registrar state machines on this
|
|
port. A transition from disabled(2) to enabled(1) will
|
|
cause a reset of all GMRP state machines on this port."
|
|
DEFVAL { enabled }
|
|
::= { dot1dPortGmrpEntry 1 }
|
|
|
|
dot1dPortGmrpFailedRegistrations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of failed GMRP registrations, for any
|
|
reason, in all VLANs, on this port."
|
|
::= { dot1dPortGmrpEntry 2 }
|
|
|
|
dot1dPortGmrpLastPduOrigin OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Source MAC Address of the last GMRP message
|
|
received on this port."
|
|
::= { dot1dPortGmrpEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- High Capacity Port Table for Transparent Bridges
|
|
-- -------------------------------------------------------------
|
|
|
|
dot1dTpHCPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dTpHCPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every high
|
|
capacity port that is associated with this transparent
|
|
bridge."
|
|
::= { dot1dTp 5 }
|
|
|
|
dot1dTpHCPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dTpHCPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistics information for each high capacity port of a
|
|
transparent bridge."
|
|
INDEX { dot1dTpPort }
|
|
::= { dot1dTpHCPortTable 1 }
|
|
|
|
Dot1dTpHCPortEntry ::=
|
|
SEQUENCE {
|
|
dot1dTpHCPortInFrames
|
|
Counter64,
|
|
dot1dTpHCPortOutFrames
|
|
Counter64,
|
|
dot1dTpHCPortInDiscards
|
|
Counter64
|
|
}
|
|
|
|
dot1dTpHCPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been received by this
|
|
port from its segment. Note that a frame received on
|
|
the interface corresponding to this port is only counted
|
|
by this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpHCPortEntry 1 }
|
|
|
|
dot1dTpHCPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been transmitted by this
|
|
port to its segment. Note that a frame transmitted on
|
|
the interface corresponding to this port is only counted
|
|
by this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpHCPortEntry 2 }
|
|
|
|
dot1dTpHCPortInDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of valid frames that have been received by this
|
|
port from its segment which were discarded (i.e.,
|
|
filtered) by the Forwarding Process."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpHCPortEntry 3 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Upper part of High Capacity Port Table for Transparent Bridges
|
|
-- ----------------------------------------------------
|
|
|
|
dot1dTpPortOverflowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dTpPortOverflowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the most-significant bits of
|
|
statistics counters for ports that are associated with this
|
|
transparent bridge that are on high capacity interfaces, as
|
|
defined in the conformance clauses for this table. This table
|
|
is provided as a way to read 64-bit counters for agents which
|
|
support only SNMPv1.
|
|
|
|
Note that the reporting of most-significant and
|
|
least-significant counter bits separately runs the risk of
|
|
missing an overflow of the lower bits in the interval between
|
|
sampling. The manager must be aware of this possibility, even
|
|
within the same varbindlist, when interpreting the results of
|
|
a request or asynchronous notification."
|
|
::= { dot1dTp 6 }
|
|
|
|
dot1dTpPortOverflowEntry OBJECT-TYPE
|
|
SYNTAX Dot1dTpPortOverflowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The most significant bits of statistics counters for a high
|
|
capacity interface of a transparent bridge. Each object is
|
|
associated with a corresponding object in dot1dTpPortTable
|
|
which indicates the least significant bits of the counter."
|
|
INDEX { dot1dTpPort }
|
|
::= { dot1dTpPortOverflowTable 1 }
|
|
|
|
Dot1dTpPortOverflowEntry ::=
|
|
SEQUENCE {
|
|
dot1dTpPortInOverflowFrames
|
|
Counter32,
|
|
dot1dTpPortOutOverflowFrames
|
|
Counter32,
|
|
dot1dTpPortInOverflowDiscards
|
|
Counter32
|
|
}
|
|
|
|
dot1dTpPortInOverflowFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated dot1dTpPortInFrames
|
|
counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpPortOverflowEntry 1 }
|
|
|
|
dot1dTpPortOutOverflowFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated dot1dTpPortOutFrames
|
|
counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpPortOverflowEntry 2 }
|
|
|
|
dot1dTpPortInOverflowDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
dot1dTpPortInDiscards counter has overflowed."
|
|
REFERENCE
|
|
"ISO/IEC 15802-3 Section 14.6.1.1.3"
|
|
::= { dot1dTpPortOverflowEntry 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- IEEE 802.1p MIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
pBridgeConformance OBJECT IDENTIFIER ::= { pBridgeMIB 2 }
|
|
|
|
pBridgeGroups OBJECT IDENTIFIER ::= { pBridgeConformance 1 }
|
|
|
|
pBridgeCompliances OBJECT IDENTIFIER
|
|
::= { pBridgeConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
pBridgeExtCapGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dDeviceCapabilities,
|
|
dot1dPortCapabilities
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicating the optional
|
|
capabilites of the device."
|
|
::= { pBridgeGroups 1 }
|
|
|
|
pBridgeDeviceGmrpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dGmrpStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing device-level control
|
|
for the Multicast Filtering extended bridge services."
|
|
::= { pBridgeGroups 2 }
|
|
|
|
pBridgeDevicePriorityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dTrafficClassesEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing device-level control
|
|
for the Priority services."
|
|
::= { pBridgeGroups 3 }
|
|
|
|
pBridgeDefaultPriorityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dPortDefaultUserPriority
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the User Priority
|
|
applicable to each port for media which do not support
|
|
native User Priority."
|
|
::= { pBridgeGroups 4 }
|
|
|
|
pBridgeRegenPriorityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dRegenUserPriority
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the User Priorities
|
|
applicable to each port for media which support native
|
|
User Priority."
|
|
::= { pBridgeGroups 5 }
|
|
|
|
pBridgePriorityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dPortNumTrafficClasses,
|
|
dot1dTrafficClass
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the traffic classes
|
|
within a bridge for each evaluated User Priority."
|
|
::= { pBridgeGroups 6 }
|
|
|
|
pBridgeAccessPriorityGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dPortOutboundAccessPriority
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects defining the media dependent
|
|
outbound access level for each priority."
|
|
::= { pBridgeGroups 7 }
|
|
|
|
pBridgePortGarpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dPortGarpJoinTime,
|
|
dot1dPortGarpLeaveTime,
|
|
dot1dPortGarpLeaveAllTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing port level control
|
|
and status information for GARP operation."
|
|
::= { pBridgeGroups 8 }
|
|
|
|
pBridgePortGmrpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dPortGmrpStatus,
|
|
dot1dPortGmrpFailedRegistrations,
|
|
dot1dPortGmrpLastPduOrigin
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing port level control
|
|
and status information for GMRP operation."
|
|
::= { pBridgeGroups 9 }
|
|
|
|
pBridgeHCPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dTpHCPortInFrames,
|
|
dot1dTpHCPortOutFrames,
|
|
dot1dTpHCPortInDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing 64-bit statistics
|
|
counters for high capacity bridge ports."
|
|
::= { pBridgeGroups 10 }
|
|
|
|
pBridgePortOverflowGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dTpPortInOverflowFrames,
|
|
dot1dTpPortOutOverflowFrames,
|
|
dot1dTpPortInOverflowDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing overflow statistics
|
|
counters for high capacity bridge ports."
|
|
::= { pBridgeGroups 11 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
pBridgeCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of Priority
|
|
and Multicast Filtering extended bridging services."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { pBridgeExtCapGroup }
|
|
|
|
GROUP pBridgeDeviceGmrpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices supporting the GMRP
|
|
application, defined by IEEE 802.1D Extended Filtering
|
|
Services."
|
|
|
|
GROUP pBridgeDevicePriorityGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for devices supporting
|
|
the priority forwarding operations defined by IEEE
|
|
802.1D."
|
|
|
|
GROUP pBridgeDefaultPriorityGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for devices supporting
|
|
the priority forwarding operations defined by the
|
|
extended bridge services with media types, such as
|
|
Ethernet, that do not support native User Priority."
|
|
|
|
GROUP pBridgeRegenPriorityGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for devices supporting
|
|
the priority forwarding operations defined by IEEE 802.1D
|
|
and which have interface media types that support
|
|
native User Priority e.g. IEEE 802.5."
|
|
|
|
GROUP pBridgePriorityGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for devices supporting
|
|
the priority forwarding operations defined by IEEE 802.1D."
|
|
|
|
GROUP pBridgeAccessPriorityGroup
|
|
DESCRIPTION
|
|
"This group is optional and is relevant only for devices
|
|
supporting the priority forwarding operations defined by
|
|
IEEE 802.1D and which have interface media types that support
|
|
native Access Priority e.g. IEEE 802.5."
|
|
|
|
GROUP pBridgePortGarpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices supporting any
|
|
of the GARP applications: e.g. GMRP, defined by the
|
|
extended filtering services of 802.1D; or GVRP,
|
|
defined by 802.1Q (refer to the Q-BRIDGE-MIB for
|
|
conformance statements for GVRP)."
|
|
|
|
GROUP pBridgePortGmrpGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for devices supporting the
|
|
GMRP application, as defined by IEEE 802.1D Extended
|
|
Filtering Services."
|
|
|
|
GROUP pBridgeHCPortGroup
|
|
DESCRIPTION
|
|
"Support for this group in a device is mandatory for those
|
|
bridge ports which map to network interfaces that have the
|
|
value of the corresponding instance of ifSpeed
|
|
greater than 650,000,000 bits/second."
|
|
|
|
GROUP pBridgePortOverflowGroup
|
|
DESCRIPTION
|
|
"Support for this group in a device is mandatory for those
|
|
bridge ports which map to network interfaces that have the
|
|
value of the corresponding instance of ifSpeed
|
|
greater than 650,000,000 bits/second."
|
|
|
|
OBJECT dot1dPortNumTrafficClasses
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT dot1dTrafficClass
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT dot1dRegenUserPriority
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { pBridgeCompliances 1 }
|
|
|
|
END |