870 lines
39 KiB
Plaintext
870 lines
39 KiB
Plaintext
-- Changes for RFC1231 (Token Ring MIB):
|
|
-- Changes from RFC-1239 applied which include:
|
|
-- removing import of experimental,
|
|
-- adding import of transmission, changing
|
|
-- dot5 to be { transmission 9 }
|
|
-- instead of { experimental 4 }
|
|
-- Added import for Counter.
|
|
-- Changed the status from optional to mandatory for
|
|
-- dot5StatsFreqErrors.
|
|
-- dperkins@scruznet.com
|
|
|
|
RFC1231-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- RFC1231
|
|
-- May 91
|
|
|
|
-- IEEE 802.5 Token Ring MIB
|
|
|
|
IMPORTS
|
|
Counter
|
|
FROM RFC1155-SMI
|
|
transmission
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
|
|
dot5 OBJECT IDENTIFIER ::= { transmission 9 }
|
|
|
|
|
|
-- All representations of MAC addresses in this MIB Module
|
|
-- use, as a textual convention (i.e. this convention does
|
|
-- not affect their encoding), the data type:
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet
|
|
-- address in the
|
|
-- "canonical" order
|
|
-- defined by IEEE 802.1a, i.e., as if it were transmitted
|
|
-- least significant bit first, even though 802.5 (in
|
|
-- contrast to other 802.x protocols) requires MAC addresses
|
|
-- to be transmitted most significant bit first.
|
|
--
|
|
-- 16-bit addresses, if needed, are represented by setting
|
|
-- their upper 4 octets to all 0's, i.e., AAFF would be
|
|
-- represented as 00000000AAFF.
|
|
|
|
|
|
|
|
-- The Interface Table
|
|
|
|
-- This table contains state and parameter information which
|
|
-- is specific to 802.5 interfaces. It is mandatory that
|
|
-- systems having 802.5 interfaces implement this table in
|
|
-- addition to the generic interfaces table [4,6] and its
|
|
-- generic extensions [11].
|
|
|
|
dot5Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot5Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Token Ring interface
|
|
parameters and state variables, one entry
|
|
per 802.5 interface."
|
|
::= { dot5 1 }
|
|
|
|
dot5Entry OBJECT-TYPE
|
|
SYNTAX Dot5Entry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Token Ring status and parameter
|
|
values for an 802.5 interface."
|
|
INDEX { dot5IfIndex }
|
|
::= { dot5Table 1 }
|
|
|
|
Dot5Entry
|
|
::= SEQUENCE {
|
|
dot5IfIndex
|
|
INTEGER,
|
|
dot5Commands
|
|
INTEGER,
|
|
dot5RingStatus
|
|
INTEGER,
|
|
dot5RingState
|
|
INTEGER,
|
|
dot5RingOpenStatus
|
|
INTEGER,
|
|
dot5RingSpeed
|
|
INTEGER,
|
|
dot5UpStream
|
|
MacAddress,
|
|
dot5ActMonParticipate
|
|
INTEGER,
|
|
dot5Functional
|
|
MacAddress
|
|
}
|
|
|
|
dot5IfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this object identifies the
|
|
802.5 interface for which this entry
|
|
contains management information. The
|
|
value of this object for a particular
|
|
interface has the same value as the
|
|
ifIndex object, defined in [4,6],
|
|
for the same interface."
|
|
::= { dot5Entry 1 }
|
|
|
|
dot5Commands OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-op(1),
|
|
open(2),
|
|
reset(3),
|
|
close(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When this object is set to the value of
|
|
open(2), the station should go into the
|
|
open state. The progress and success of
|
|
the open is given by the values of the
|
|
objects dot5RingState and
|
|
dot5RingOpenStatus.
|
|
When this object is set to the value
|
|
of reset(3), then the station should do
|
|
a reset. On a reset, all MIB counters
|
|
should retain their values, if possible.
|
|
Other side affects are dependent on the
|
|
hardware chip set.
|
|
When this object is set to the value
|
|
of close(4), the station should go into
|
|
the stopped state by removing itself
|
|
from the ring.
|
|
Setting this object to a value of
|
|
no-op(1) has no effect.
|
|
When read, this object always has a
|
|
value of no-op(1)."
|
|
::= { dot5Entry 2 }
|
|
|
|
dot5RingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current interface status which can
|
|
be used to diagnose fluctuating problems
|
|
that can occur on token rings, after a
|
|
station has successfully been added to
|
|
the ring.
|
|
Before an open is completed, this
|
|
object has the value for the 'no status'
|
|
condition. The dot5RingState and
|
|
dot5RingOpenStatus objects provide for
|
|
debugging problems when the station
|
|
can not even enter the ring.
|
|
The object's value is a sum of
|
|
values, one for each currently applicable
|
|
condition. The following values are
|
|
defined for various conditions:
|
|
|
|
0 = No Problems detected
|
|
32 = Ring Recovery
|
|
64 = Single Station
|
|
256 = Remove Received
|
|
512 = reserved
|
|
1024 = Auto-Removal Error
|
|
2048 = Lobe Wire Fault
|
|
4096 = Transmit Beacon
|
|
8192 = Soft Error
|
|
16384 = Hard Error
|
|
32768 = Signal Loss
|
|
131072 = no status, open not completed."
|
|
::= { dot5Entry 3 }
|
|
|
|
dot5RingState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
opened(1),
|
|
closed(2),
|
|
opening(3),
|
|
closing(4),
|
|
openFailure(5),
|
|
ringFailure(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current interface state with respect
|
|
to entering or leaving the ring."
|
|
::= { dot5Entry 4 }
|
|
|
|
dot5RingOpenStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOpen(1), -- no open attempted
|
|
badParam(2),
|
|
lobeFailed(3),
|
|
signalLoss(4),
|
|
insertionTimeout(5),
|
|
ringFailed(6),
|
|
beaconing(7),
|
|
duplicateMAC(8),
|
|
requestFailed(9),
|
|
removeReceived(10),
|
|
open(11) -- last open successful
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object indicates the success, or the
|
|
reason for failure, of the station's most
|
|
recent attempt to enter the ring."
|
|
::= { dot5Entry 5 }
|
|
|
|
dot5RingSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
oneMegabit(2),
|
|
fourMegabit(3),
|
|
sixteenMegabit(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ring's bandwidth."
|
|
::= { dot5Entry 6 }
|
|
|
|
dot5UpStream OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC-address of the up stream neighbor
|
|
station in the ring."
|
|
::= { dot5Entry 7 }
|
|
|
|
dot5ActMonParticipate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If this object has a value of true(1) then
|
|
this interface will participate in the
|
|
active monitor selection process. If the
|
|
value is false(2) then it will not.
|
|
Setting this object might not have an
|
|
effect until the next time the interface
|
|
is opened."
|
|
::= { dot5Entry 8 }
|
|
|
|
dot5Functional OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bit mask of all Token Ring functional
|
|
addresses for which this interface will
|
|
accept frames."
|
|
::= { dot5Entry 9 }
|
|
|
|
|
|
|
|
-- The Statistics Table
|
|
|
|
-- This table contains statistics and error counter which are
|
|
-- specific to 802.5 interfaces. It is mandatory that systems
|
|
-- having 802.5 interfaces implement this table.
|
|
|
|
dot5StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot5StatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing Token Ring statistics,
|
|
one entry per 802.5 interface.
|
|
All the statistics are defined using
|
|
the syntax Counter as 32-bit wrap around
|
|
counters. Thus, if an interface's
|
|
hardware maintains these statistics in
|
|
16-bit counters, then the agent must read
|
|
the hardware's counters frequently enough
|
|
to prevent loss of significance, in order
|
|
to maintain 32-bit counters in software."
|
|
::= { dot5 2 }
|
|
|
|
dot5StatsEntry OBJECT-TYPE
|
|
SYNTAX Dot5StatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry contains the 802.5 statistics
|
|
for a particular interface."
|
|
INDEX { dot5StatsIfIndex }
|
|
::= { dot5StatsTable 1 }
|
|
|
|
Dot5StatsEntry
|
|
::= SEQUENCE {
|
|
dot5StatsIfIndex
|
|
INTEGER,
|
|
dot5StatsLineErrors
|
|
Counter,
|
|
dot5StatsBurstErrors
|
|
Counter,
|
|
dot5StatsACErrors
|
|
Counter,
|
|
dot5StatsAbortTransErrors
|
|
Counter,
|
|
dot5StatsInternalErrors
|
|
Counter,
|
|
dot5StatsLostFrameErrors
|
|
Counter,
|
|
dot5StatsReceiveCongestions
|
|
Counter,
|
|
dot5StatsFrameCopiedErrors
|
|
Counter,
|
|
dot5StatsTokenErrors
|
|
Counter,
|
|
dot5StatsSoftErrors
|
|
Counter,
|
|
dot5StatsHardErrors
|
|
Counter,
|
|
dot5StatsSignalLoss
|
|
Counter,
|
|
dot5StatsTransmitBeacons
|
|
Counter,
|
|
dot5StatsRecoverys
|
|
Counter,
|
|
dot5StatsLobeWires
|
|
Counter,
|
|
dot5StatsRemoves
|
|
Counter,
|
|
dot5StatsSingles
|
|
Counter,
|
|
dot5StatsFreqErrors
|
|
Counter
|
|
}
|
|
|
|
|
|
dot5StatsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this object identifies the
|
|
802.5 interface for which this entry
|
|
contains management information. The
|
|
value of this object for a particular
|
|
interface has the same value as the
|
|
ifIndex object, defined in [4,6], for
|
|
the same interface."
|
|
::= { dot5StatsEntry 1 }
|
|
|
|
dot5StatsLineErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a frame
|
|
or token is copied or repeated by a
|
|
station, the E bit is zero in the frame
|
|
or token and one of the following
|
|
conditions exists: 1) there is a
|
|
non-data bit (J or K bit) between the SD
|
|
and the ED of the frame or token, or
|
|
2) there is an FCS error in the frame."
|
|
::= { dot5StatsEntry 2 }
|
|
|
|
dot5StatsBurstErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
detects the absence of transitions for five
|
|
half-bit timers (burst-five error)."
|
|
::= { dot5StatsEntry 3 }
|
|
|
|
dot5StatsACErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
receives an AMP or SMP frame in which A is
|
|
equal to C is equal to 0, and then receives
|
|
another SMP frame with A is equal to C is
|
|
equal to 0 without first receiving an AMP
|
|
frame. It denotes a station that cannot set
|
|
the AC bits properly."
|
|
::= { dot5StatsEntry 4 }
|
|
|
|
dot5StatsAbortTransErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
transmits an abort delimiter while
|
|
transmitting."
|
|
::= { dot5StatsEntry 5 }
|
|
|
|
dot5StatsInternalErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
recognizes an internal error."
|
|
::= { dot5StatsEntry 6 }
|
|
|
|
dot5StatsLostFrameErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
is transmitting and its TRR timer expires.
|
|
This condition denotes a condition where a
|
|
transmitting station in strip mode does not
|
|
receive the trailer of the frame before the
|
|
TRR timer goes off."
|
|
::= { dot5StatsEntry 7 }
|
|
|
|
dot5StatsReceiveCongestions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
recognizes a frame addressed to its
|
|
specific address, but has no available
|
|
buffer space indicating that the station
|
|
is congested."
|
|
::= { dot5StatsEntry 8 }
|
|
|
|
dot5StatsFrameCopiedErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
recognizes a frame addressed to its
|
|
specific address and detects that the FS
|
|
field A bits are set to 1 indicating a
|
|
possible line hit or duplicate address."
|
|
::= { dot5StatsEntry 9 }
|
|
|
|
dot5StatsTokenErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This counter is incremented when a station
|
|
acting as the active monitor recognizes an
|
|
error condition that needs a token
|
|
transmitted."
|
|
::= { dot5StatsEntry 10 }
|
|
|
|
dot5StatsSoftErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Soft Errors the interface
|
|
has detected. It directly corresponds to
|
|
the number of Report Error MAC frames
|
|
that this interface has transmitted.
|
|
Soft Errors are those which are
|
|
recoverable by the MAC layer protocols."
|
|
::= { dot5StatsEntry 11 }
|
|
|
|
dot5StatsHardErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times this interface has
|
|
detected an immediately recoverable
|
|
fatal error. It denotes the number of
|
|
times this interface is either
|
|
transmitting or receiving beacon MAC
|
|
frames."
|
|
::= { dot5StatsEntry 12 }
|
|
|
|
dot5StatsSignalLoss OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times this interface has
|
|
detected the loss of signal condition from
|
|
the ring."
|
|
::= { dot5StatsEntry 13 }
|
|
|
|
dot5StatsTransmitBeacons OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times this interface has
|
|
transmitted a beacon frame."
|
|
::= { dot5StatsEntry 14 }
|
|
|
|
dot5StatsRecoverys OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Claim Token MAC frames
|
|
received or transmitted after the interface
|
|
has received a Ring Purge MAC frame. This
|
|
counter signifies the number of times the
|
|
ring has been purged and is being recovered
|
|
back into a normal operating state."
|
|
::= { dot5StatsEntry 15 }
|
|
|
|
dot5StatsLobeWires OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the interface has
|
|
detected an open or short circuit in the
|
|
lobe data path. The adapter will be closed
|
|
and dot5RingState will signify this
|
|
condition."
|
|
::= { dot5StatsEntry 16 }
|
|
|
|
dot5StatsRemoves OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the interface has
|
|
received a Remove Ring Station MAC frame
|
|
request. When this frame is received
|
|
the interface will enter the close state
|
|
and dot5RingState will signify this
|
|
condition."
|
|
::= { dot5StatsEntry 17 }
|
|
|
|
dot5StatsSingles OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the interface has
|
|
sensed that it is the only station on the
|
|
ring. This will happen if the interface
|
|
is the first one up on a ring, or if
|
|
there is a hardware problem."
|
|
::= { dot5StatsEntry 18 }
|
|
|
|
dot5StatsFreqErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the interface has
|
|
detected that the frequency of the
|
|
incoming signal differs from the expected
|
|
frequency by more than that specified by
|
|
the IEEE 802.5 standard, see chapter 7
|
|
in [10]."
|
|
::= { dot5StatsEntry 19 }
|
|
|
|
|
|
-- The Timer Table
|
|
|
|
-- This group contains the values of the timers defined in
|
|
-- [10] for 802.5 interfaces. It is optional that systems
|
|
-- having 802.5 interfaces implement this group.
|
|
|
|
dot5TimerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot5TimerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Token Ring interface
|
|
timer values, one entry per 802.5
|
|
interface."
|
|
::= { dot5 5 }
|
|
|
|
dot5TimerEntry OBJECT-TYPE
|
|
SYNTAX Dot5TimerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Token Ring timer values for an
|
|
802.5 interface."
|
|
INDEX { dot5TimerIfIndex }
|
|
::= { dot5TimerTable 1 }
|
|
|
|
Dot5TimerEntry
|
|
::= SEQUENCE {
|
|
dot5TimerIfIndex
|
|
INTEGER,
|
|
dot5TimerReturnRepeat
|
|
INTEGER,
|
|
dot5TimerHolding
|
|
INTEGER,
|
|
dot5TimerQueuePDU
|
|
INTEGER,
|
|
dot5TimerValidTransmit
|
|
INTEGER,
|
|
dot5TimerNoToken
|
|
INTEGER,
|
|
dot5TimerActiveMon
|
|
INTEGER,
|
|
dot5TimerStandbyMon
|
|
INTEGER,
|
|
dot5TimerErrorReport
|
|
INTEGER,
|
|
dot5TimerBeaconTransmit
|
|
INTEGER,
|
|
dot5TimerBeaconReceive
|
|
INTEGER
|
|
}
|
|
|
|
dot5TimerIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this object identifies the
|
|
802.5 interface for which this entry
|
|
contains timer values. The value of
|
|
this object for a particular interface
|
|
has the same value as the ifIndex
|
|
object, defined in [4,6], for the same
|
|
interface."
|
|
::= { dot5TimerEntry 1 }
|
|
|
|
dot5TimerReturnRepeat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value used to ensure the
|
|
interface will return to Repeat State, in
|
|
units of 100 micro-seconds. The value
|
|
should be greater than the maximum ring
|
|
latency.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 2 }
|
|
|
|
dot5TimerHolding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum period of time a station is
|
|
permitted to transmit frames after capturing
|
|
a token, in units of 100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 3 }
|
|
|
|
dot5TimerQueuePDU OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value for enqueuing of an SMP
|
|
PDU after reception of an AMP or SMP
|
|
frame in which the A and C bits were
|
|
equal to 0, in units of 100
|
|
micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 4 }
|
|
|
|
dot5TimerValidTransmit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value used by the active
|
|
monitor to detect the absence of valid
|
|
transmissions, in units of 100
|
|
micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 5 }
|
|
|
|
dot5TimerNoToken OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value used to recover from
|
|
various-related error situations [9].
|
|
If N is the maximum number of stations on
|
|
the ring, the value of this timer is
|
|
normally:
|
|
dot5TimerReturnRepeat + N*dot5TimerHolding.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 6 }
|
|
|
|
dot5TimerActiveMon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value used by the active
|
|
monitor to stimulate the enqueuing of an
|
|
AMP PDU for transmission, in units of
|
|
100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 7 }
|
|
|
|
dot5TimerStandbyMon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value used by the stand-by
|
|
monitors to ensure that there is an active
|
|
monitor on the ring and to detect a
|
|
continuous stream of tokens, in units of
|
|
100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 8 }
|
|
|
|
dot5TimerErrorReport OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value which determines how
|
|
often a station shall send a Report Error
|
|
MAC frame to report its error counters,
|
|
in units of 100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 9 }
|
|
|
|
dot5TimerBeaconTransmit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value which determines how
|
|
long a station shall remain in the state
|
|
of transmitting Beacon frames before
|
|
entering the Bypass state, in units of
|
|
100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 10 }
|
|
|
|
dot5TimerBeaconReceive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time-out value which determines how
|
|
long a station shall receive Beacon
|
|
frames from its downstream neighbor
|
|
before entering the Bypass state, in
|
|
units of 100 micro-seconds.
|
|
Implementors are encouraged to provide
|
|
read-write access to this object if that is
|
|
possible/useful in their system, but giving
|
|
due consideration to the dangers of
|
|
write-able timers."
|
|
::= { dot5TimerEntry 11 }
|
|
|
|
|
|
-- 802.5 Interface Tests
|
|
|
|
dot5Tests OBJECT IDENTIFIER ::= { dot5 3 }
|
|
|
|
-- The extensions to the interfaces table proposed in [11]
|
|
-- define a table object, ifExtnsTestTable, through which a
|
|
-- network manager can instruct an agent to test an interface
|
|
-- for various faults. A test to be performed is identified
|
|
-- (as the value of ifExtnsTestType) via an OBJECT IDENTIFIER.
|
|
--
|
|
-- The Full-Duplex Loop Back Test is a common test, defined
|
|
-- in [11] as:
|
|
--
|
|
-- testFullDuplexLoopBack
|
|
--
|
|
-- Invoking this test on a 802.5 interface causes the
|
|
-- interface to check the path from memory through the
|
|
-- chip set's internal logic and back to memory, thus
|
|
-- checking the proper functioning of the systems's
|
|
-- interface to the chip set.
|
|
|
|
-- The Insert Function test is defined by:
|
|
|
|
testInsertFunc OBJECT IDENTIFIER ::= { dot5Tests 1 }
|
|
|
|
-- Invoking this test causes the station to test the insert
|
|
-- ring logic of the hardware if the station's lobe media
|
|
-- cable is connected to a wiring concentrator. Note that
|
|
-- this command inserts the station into the network, and
|
|
-- thus, could cause problems if the station is connected
|
|
-- to a operational network.
|
|
|
|
|
|
-- 802.5 Hardware Chip Sets
|
|
|
|
dot5ChipSets OBJECT IDENTIFIER ::= { dot5 4 }
|
|
|
|
-- The extensions to the interfaces table proposed in [11]
|
|
-- define an object, ifExtnsChipSet, with the syntax of
|
|
-- OBJECT IDENTIFIER, to identify the hardware chip set in
|
|
-- use by an interface. That definition specifies just
|
|
-- one applicable object identifier:
|
|
--
|
|
-- unknownChipSet
|
|
--
|
|
-- for use as the value of ifExtnsChipSet when the specific
|
|
-- chip set is unknown.
|
|
--
|
|
-- This MIB defines the following for use as values of
|
|
-- ifExtnsChipSet:
|
|
|
|
-- IBM 16/4 Mb/s
|
|
chipSetIBM16 OBJECT IDENTIFIER ::= { dot5ChipSets 1 }
|
|
|
|
-- TI 4Mb/s
|
|
chipSetTItms380 OBJECT IDENTIFIER ::= { dot5ChipSets 2 }
|
|
|
|
-- TI 16/4 Mb/s
|
|
chipSetTItms380c16 OBJECT IDENTIFIER ::= { dot5ChipSets 3 }
|
|
|
|
END
|
|
|
|
|