1956 lines
68 KiB
Plaintext
1956 lines
68 KiB
Plaintext
DISMAN-EVENT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32,
|
|
NOTIFICATION-TYPE, Counter32,
|
|
Gauge32, mib-2, zeroDotZero FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus,
|
|
TruthValue FROM SNMPv2-TC
|
|
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
sysUpTime FROM SNMPv2-MIB
|
|
SnmpTagValue FROM SNMP-TARGET-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
|
|
|
dismanEventMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200010160000Z" -- 16 October 2000
|
|
ORGANIZATION "IETF Distributed Management Working Group"
|
|
CONTACT-INFO "Ramanathan Kavasseri
|
|
Cisco Systems, Inc.
|
|
170 West Tasman Drive,
|
|
San Jose CA 95134-1706.
|
|
Phone: +1 408 526 4527
|
|
Email: ramk@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module for defining event triggers and actions
|
|
for network management purposes."
|
|
-- Revision History
|
|
|
|
REVISION "200010160000Z" -- 16 October 2000
|
|
DESCRIPTION "This is the initial version of this MIB.
|
|
Published as RFC 2981"
|
|
::= { mib-2 88 }
|
|
|
|
dismanEventMIBObjects OBJECT IDENTIFIER ::= { dismanEventMIB 1 }
|
|
|
|
-- Management Triggered Event (MTE) objects
|
|
|
|
mteResource OBJECT IDENTIFIER ::= { dismanEventMIBObjects 1 }
|
|
mteTrigger OBJECT IDENTIFIER ::= { dismanEventMIBObjects 2 }
|
|
mteObjects OBJECT IDENTIFIER ::= { dismanEventMIBObjects 3 }
|
|
mteEvent OBJECT IDENTIFIER ::= { dismanEventMIBObjects 4 }
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
FailureReason ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reasons for failures in an attempt to perform a management
|
|
request.
|
|
|
|
The first group of errors, numbered less than 0, are related
|
|
to problems in sending the request. The existence of a
|
|
particular error code here does not imply that all
|
|
implementations are capable of sensing that error and
|
|
|
|
|
|
returning that code.
|
|
|
|
The second group, numbered greater than 0, are copied
|
|
directly from SNMP protocol operations and are intended to
|
|
carry exactly the meanings defined for the protocol as returned
|
|
in an SNMP response.
|
|
|
|
localResourceLack some local resource such as memory
|
|
lacking or
|
|
mteResourceSampleInstanceMaximum
|
|
exceeded
|
|
badDestination unrecognized domain name or otherwise
|
|
invalid destination address
|
|
destinationUnreachable can't get to destination address
|
|
noResponse no response to SNMP request
|
|
badType the data syntax of a retrieved object
|
|
as not as expected
|
|
sampleOverrun another sample attempt occurred before
|
|
the previous one completed"
|
|
|
|
SYNTAX INTEGER { localResourceLack(-1),
|
|
badDestination(-2),
|
|
destinationUnreachable(-3),
|
|
noResponse(-4),
|
|
badType(-5),
|
|
sampleOverrun(-6),
|
|
|
|
noError(0),
|
|
|
|
tooBig(1),
|
|
noSuchName(2),
|
|
badValue(3),
|
|
readOnly(4),
|
|
genErr(5),
|
|
noAccess(6),
|
|
wrongType(7),
|
|
wrongLength(8),
|
|
wrongEncoding(9),
|
|
wrongValue(10),
|
|
noCreation(11),
|
|
inconsistentValue(12),
|
|
resourceUnavailable(13),
|
|
commitFailed(14),
|
|
undoFailed(15),
|
|
authorizationError(16),
|
|
notWritable(17),
|
|
inconsistentName(18) }
|
|
--
|
|
|
|
|
|
-- Resource Control Section
|
|
--
|
|
|
|
mteResourceSampleMinimum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum mteTriggerFrequency this system will
|
|
accept. A system may use the larger values of this minimum to
|
|
lessen the impact of constant sampling. For larger
|
|
sampling intervals the system samples less often and
|
|
suffers less overhead. This object provides a way to enforce
|
|
such lower overhead for all triggers created after it is
|
|
set.
|
|
|
|
Unless explicitly resource limited, a system's value for
|
|
this object SHOULD be 1, allowing as small as a 1 second
|
|
interval for ongoing trigger sampling.
|
|
|
|
Changing this value will not invalidate an existing setting
|
|
of mteTriggerFrequency."
|
|
::= { mteResource 1 }
|
|
|
|
mteResourceSampleInstanceMaximum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "instances"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of instance entries this system will
|
|
support for sampling.
|
|
|
|
These are the entries that maintain state, one for each
|
|
instance of each sampled object as selected by
|
|
mteTriggerValueID. Note that wildcarded objects result
|
|
in multiple instances of this state.
|
|
|
|
A value of 0 indicates no preset limit, that is, the limit
|
|
is dynamic based on system operation and resources.
|
|
|
|
Unless explicitly resource limited, a system's value for
|
|
this object SHOULD be 0.
|
|
|
|
Changing this value will not eliminate or inhibit existing
|
|
sample state but could prevent allocation of additional state
|
|
information."
|
|
|
|
|
|
::= { mteResource 2 }
|
|
|
|
mteResourceSampleInstances OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "instances"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of currently active instance entries as
|
|
defined for mteResourceSampleInstanceMaximum."
|
|
::= { mteResource 3 }
|
|
|
|
mteResourceSampleInstancesHigh OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "instances"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest value of mteResourceSampleInstances that has
|
|
occurred since initialization of the management system."
|
|
::= { mteResource 4 }
|
|
|
|
mteResourceSampleInstanceLacks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "instances"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this system could not take a new sample
|
|
because that allocation would have exceeded the limit set by
|
|
mteResourceSampleInstanceMaximum."
|
|
::= { mteResource 5 }
|
|
|
|
--
|
|
-- Trigger Section
|
|
--
|
|
|
|
-- Counters
|
|
|
|
mteTriggerFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "failures"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an attempt to check for a trigger
|
|
condition has failed. This counts individually for each
|
|
attempt in a group of targets or each attempt for a
|
|
|
|
|
|
wildcarded object."
|
|
::= { mteTrigger 1 }
|
|
|
|
--
|
|
-- Trigger Table
|
|
--
|
|
|
|
mteTriggerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteTriggerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event trigger information."
|
|
::= { mteTrigger 2 }
|
|
|
|
mteTriggerEntry OBJECT-TYPE
|
|
SYNTAX MteTriggerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single trigger. Applications create and
|
|
delete entries using mteTriggerEntryStatus."
|
|
INDEX { mteOwner, IMPLIED mteTriggerName }
|
|
::= { mteTriggerTable 1 }
|
|
|
|
MteTriggerEntry ::= SEQUENCE {
|
|
mteOwner SnmpAdminString,
|
|
mteTriggerName SnmpAdminString,
|
|
mteTriggerComment SnmpAdminString,
|
|
mteTriggerTest BITS,
|
|
mteTriggerSampleType INTEGER,
|
|
mteTriggerValueID OBJECT IDENTIFIER,
|
|
mteTriggerValueIDWildcard TruthValue,
|
|
mteTriggerTargetTag SnmpTagValue,
|
|
mteTriggerContextName SnmpAdminString,
|
|
mteTriggerContextNameWildcard TruthValue,
|
|
mteTriggerFrequency Unsigned32,
|
|
mteTriggerObjectsOwner SnmpAdminString,
|
|
mteTriggerObjects SnmpAdminString,
|
|
mteTriggerEnabled TruthValue,
|
|
mteTriggerEntryStatus RowStatus
|
|
}
|
|
|
|
mteOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"The owner of this entry. The exact semantics of this
|
|
string are subject to the security policy defined by the
|
|
security administrator."
|
|
::= { mteTriggerEntry 1 }
|
|
|
|
mteTriggerName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A locally-unique, administratively assigned name for the
|
|
trigger within the scope of mteOwner."
|
|
::= { mteTriggerEntry 2 }
|
|
|
|
mteTriggerComment OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the trigger's function and use."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerEntry 3 }
|
|
|
|
mteTriggerTest OBJECT-TYPE
|
|
SYNTAX BITS { existence(0), boolean(1), threshold(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of trigger test to perform. For 'boolean' and
|
|
'threshold' tests, the object at mteTriggerValueID MUST
|
|
evaluate to an integer, that is, anything that ends up encoded
|
|
for transmission (that is, in BER, not ASN.1) as an integer.
|
|
|
|
For 'existence', the specific test is as selected by
|
|
mteTriggerExistenceTest. When an object appears, vanishes
|
|
or changes value, the trigger fires. If the object's
|
|
appearance caused the trigger firing, the object MUST
|
|
vanish before the trigger can be fired again for it, and
|
|
vice versa. If the trigger fired due to a change in the
|
|
object's value, it will be fired again on every successive
|
|
value change for that object.
|
|
|
|
For 'boolean', the specific test is as selected by
|
|
mteTriggerBooleanTest. If the test result is true the trigger
|
|
fires. The trigger will not fire again until the value has
|
|
become false and come back to true.
|
|
|
|
For 'threshold' the test works as described below for
|
|
|
|
|
|
mteTriggerThresholdStartup, mteTriggerThresholdRising, and
|
|
mteTriggerThresholdFalling.
|
|
|
|
Note that combining 'boolean' and 'threshold' tests on the
|
|
same object may be somewhat redundant."
|
|
DEFVAL { { boolean } }
|
|
::= { mteTriggerEntry 4 }
|
|
|
|
mteTriggerSampleType OBJECT-TYPE
|
|
SYNTAX INTEGER { absoluteValue(1), deltaValue(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of sampling to perform.
|
|
|
|
An 'absoluteValue' sample requires only a single sample to be
|
|
meaningful, and is exactly the value of the object at
|
|
mteTriggerValueID at the sample time.
|
|
|
|
A 'deltaValue' requires two samples to be meaningful and is
|
|
thus not available for testing until the second and subsequent
|
|
samples after the object at mteTriggerValueID is first found
|
|
to exist. It is the difference between the two samples. For
|
|
unsigned values it is always positive, based on unsigned
|
|
arithmetic. For signed values it can be positive or negative.
|
|
|
|
For SNMP counters to be meaningful they should be sampled as a
|
|
'deltaValue'.
|
|
|
|
For 'deltaValue' mteTriggerDeltaTable contains further
|
|
parameters.
|
|
|
|
If only 'existence' is set in mteTriggerTest this object has
|
|
no meaning."
|
|
DEFVAL { absoluteValue }
|
|
::= { mteTriggerEntry 5 }
|
|
|
|
mteTriggerValueID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the MIB object to sample to see
|
|
if the trigger should fire.
|
|
|
|
This may be wildcarded by truncating all or part of the
|
|
instance portion, in which case the value is obtained
|
|
as if with a GetNext function, checking multiple values
|
|
|
|
|
|
if they exist. If such wildcarding is applied,
|
|
mteTriggerValueIDWildcard must be 'true' and if not it must
|
|
be 'false'.
|
|
|
|
Bad object identifiers or a mismatch between truncating the
|
|
identifier and the value of mteTriggerValueIDWildcard result
|
|
in operation as one would expect when providing the wrong
|
|
identifier to a Get or GetNext operation. The Get will fail
|
|
or get the wrong object. The GetNext will indeed get whatever
|
|
is next, proceeding until it runs past the initial part of the
|
|
identifier and perhaps many unintended objects for confusing
|
|
results. If the value syntax of those objects is not usable,
|
|
that results in a 'badType' error that terminates the scan.
|
|
|
|
Each instance that fills the wildcard is independent of any
|
|
additional instances, that is, wildcarded objects operate
|
|
as if there were a separate table entry for each instance
|
|
that fills the wildcard without having to actually predict
|
|
all possible instances ahead of time."
|
|
DEFVAL { zeroDotZero }
|
|
::= { mteTriggerEntry 6 }
|
|
|
|
mteTriggerValueIDWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether mteTriggerValueID is to be treated as
|
|
fully-specified or wildcarded, with 'true' indicating wildcard."
|
|
DEFVAL { false }
|
|
::= { mteTriggerEntry 7 }
|
|
|
|
mteTriggerTargetTag OBJECT-TYPE
|
|
SYNTAX SnmpTagValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tag for the target(s) from which to obtain the condition
|
|
for a trigger check.
|
|
|
|
A length of 0 indicates the local system. In this case,
|
|
access to the objects indicated by mteTriggerValueID is under
|
|
the security credentials of the requester that set
|
|
mteTriggerEntryStatus to 'active'. Those credentials are the
|
|
input parameters for isAccessAllowed from the Architecture for
|
|
Describing SNMP Management Frameworks.
|
|
|
|
Otherwise access rights are checked according to the security
|
|
|
|
|
|
parameters resulting from the tag."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerEntry 8 }
|
|
|
|
mteTriggerContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management context from which to obtain mteTriggerValueID.
|
|
|
|
This may be wildcarded by leaving characters off the end. For
|
|
example use 'Repeater' to wildcard to 'Repeater1',
|
|
'Repeater2', 'Repeater-999.87b', and so on. To indicate such
|
|
wildcarding is intended, mteTriggerContextNameWildcard must
|
|
be 'true'.
|
|
|
|
Each instance that fills the wildcard is independent of any
|
|
additional instances, that is, wildcarded objects operate
|
|
as if there were a separate table entry for each instance
|
|
that fills the wildcard without having to actually predict
|
|
all possible instances ahead of time.
|
|
|
|
Operation of this feature assumes that the local system has a
|
|
list of available contexts against which to apply the
|
|
wildcard. If the objects are being read from the local
|
|
system, this is clearly the system's own list of contexts.
|
|
For a remote system a local version of such a list is not
|
|
defined by any current standard and may not be available, so
|
|
this function MAY not be supported."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerEntry 9 }
|
|
|
|
mteTriggerContextNameWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether mteTriggerContextName is to be treated as
|
|
fully-specified or wildcarded, with 'true' indicating wildcard."
|
|
DEFVAL { false }
|
|
::= { mteTriggerEntry 10 }
|
|
|
|
mteTriggerFrequency OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION
|
|
"The number of seconds to wait between trigger samples. To
|
|
encourage consistency in sampling, the interval is measured
|
|
from the beginning of one check to the beginning of the next
|
|
and the timer is restarted immediately when it expires, not
|
|
when the check completes.
|
|
|
|
If the next sample begins before the previous one completed the
|
|
system may either attempt to make the check or treat this as an
|
|
error condition with the error 'sampleOverrun'.
|
|
|
|
A frequency of 0 indicates instantaneous recognition of the
|
|
condition. This is not possible in many cases, but may
|
|
be supported in cases where it makes sense and the system is
|
|
able to do so. This feature allows the MIB to be used in
|
|
implementations where such interrupt-driven behavior is
|
|
possible and is not likely to be supported for all MIB objects
|
|
even then since such sampling generally has to be tightly
|
|
integrated into low-level code.
|
|
|
|
Systems that can support this SHOULD document those cases
|
|
where it can be used. In cases where it can not, setting this
|
|
object to 0 should be disallowed."
|
|
DEFVAL { 600 }
|
|
::= { mteTriggerEntry 11 }
|
|
|
|
mteTriggerObjectsOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerObjects, the mteOwner of a group of
|
|
objects from mteObjectsTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerEntry 12 }
|
|
|
|
mteTriggerObjects OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteObjectsName of a group of objects from
|
|
mteObjectsTable. These objects are to be added to any
|
|
Notification resulting from the firing of this trigger.
|
|
|
|
A list of objects may also be added based on the event or on
|
|
the value of mteTriggerTest.
|
|
|
|
|
|
|
|
A length of 0 indicates no additional objects."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerEntry 13 }
|
|
|
|
mteTriggerEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow a trigger to be configured but not used.
|
|
When the value is 'false' the trigger is not sampled."
|
|
DEFVAL { false }
|
|
::= { mteTriggerEntry 14 }
|
|
|
|
mteTriggerEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows creation and deletion of entries.
|
|
Once made active an entry may not be modified except to
|
|
delete it."
|
|
::= { mteTriggerEntry 15 }
|
|
|
|
--
|
|
-- Trigger Delta Table
|
|
--
|
|
|
|
mteTriggerDeltaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteTriggerDeltaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event trigger information for delta
|
|
sampling."
|
|
::= { mteTrigger 3 }
|
|
|
|
mteTriggerDeltaEntry OBJECT-TYPE
|
|
SYNTAX MteTriggerDeltaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single trigger's delta sampling. Entries
|
|
automatically exist in this this table for each mteTriggerEntry
|
|
that has mteTriggerSampleType set to 'deltaValue'."
|
|
INDEX { mteOwner, IMPLIED mteTriggerName }
|
|
::= { mteTriggerDeltaTable 1 }
|
|
|
|
|
|
|
|
MteTriggerDeltaEntry ::= SEQUENCE {
|
|
mteTriggerDeltaDiscontinuityID OBJECT IDENTIFIER,
|
|
mteTriggerDeltaDiscontinuityIDWildcard TruthValue,
|
|
mteTriggerDeltaDiscontinuityIDType INTEGER
|
|
}
|
|
|
|
sysUpTimeInstance OBJECT IDENTIFIER ::= { sysUpTime 0 }
|
|
|
|
mteTriggerDeltaDiscontinuityID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or
|
|
DateAndTime object that indicates a discontinuity in the value
|
|
at mteTriggerValueID.
|
|
|
|
The OID may be for a leaf object (e.g. sysUpTime.0) or may
|
|
be wildcarded to match mteTriggerValueID.
|
|
|
|
This object supports normal checking for a discontinuity in a
|
|
counter. Note that if this object does not point to sysUpTime
|
|
discontinuity checking MUST still check sysUpTime for an overall
|
|
discontinuity.
|
|
|
|
If the object identified is not accessible the sample attempt
|
|
is in error, with the error code as from an SNMP request.
|
|
|
|
Bad object identifiers or a mismatch between truncating the
|
|
identifier and the value of mteDeltaDiscontinuityIDWildcard
|
|
result in operation as one would expect when providing the
|
|
wrong identifier to a Get operation. The Get will fail or get
|
|
the wrong object. If the value syntax of those objects is not
|
|
usable, that results in an error that terminates the sample
|
|
with a 'badType' error code."
|
|
DEFVAL { sysUpTimeInstance }
|
|
::= { mteTriggerDeltaEntry 1 }
|
|
|
|
mteTriggerDeltaDiscontinuityIDWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether mteTriggerDeltaDiscontinuityID is to be
|
|
treated as fully-specified or wildcarded, with 'true'
|
|
indicating wildcard. Note that the value of this object will
|
|
be the same as that of the corresponding instance of
|
|
mteTriggerValueIDWildcard when the corresponding
|
|
|
|
|
|
mteTriggerSampleType is 'deltaValue'."
|
|
DEFVAL { false }
|
|
::= { mteTriggerDeltaEntry 2 }
|
|
|
|
mteTriggerDeltaDiscontinuityIDType OBJECT-TYPE
|
|
SYNTAX INTEGER { timeTicks(1), timeStamp(2), dateAndTime(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value 'timeTicks' indicates the
|
|
mteTriggerDeltaDiscontinuityID of this row is of syntax
|
|
TimeTicks. The value 'timeStamp' indicates syntax TimeStamp.
|
|
The value 'dateAndTime' indicates syntax DateAndTime."
|
|
DEFVAL { timeTicks }
|
|
::= { mteTriggerDeltaEntry 3 }
|
|
|
|
--
|
|
-- Trigger Existence Table
|
|
--
|
|
|
|
mteTriggerExistenceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteTriggerExistenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event trigger information for existence
|
|
triggers."
|
|
::= { mteTrigger 4 }
|
|
|
|
mteTriggerExistenceEntry OBJECT-TYPE
|
|
SYNTAX MteTriggerExistenceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single existence trigger. Entries
|
|
automatically exist in this this table for each mteTriggerEntry
|
|
that has 'existence' set in mteTriggerTest."
|
|
INDEX { mteOwner, IMPLIED mteTriggerName }
|
|
::= { mteTriggerExistenceTable 1 }
|
|
|
|
MteTriggerExistenceEntry ::= SEQUENCE {
|
|
mteTriggerExistenceTest BITS,
|
|
mteTriggerExistenceStartup BITS,
|
|
mteTriggerExistenceObjectsOwner SnmpAdminString,
|
|
mteTriggerExistenceObjects SnmpAdminString,
|
|
mteTriggerExistenceEventOwner SnmpAdminString,
|
|
mteTriggerExistenceEvent SnmpAdminString
|
|
}
|
|
|
|
|
|
mteTriggerExistenceTest OBJECT-TYPE
|
|
SYNTAX BITS { present(0), absent(1), changed(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of existence test to perform. The trigger fires
|
|
when the object at mteTriggerValueID is seen to go from
|
|
present to absent, from absent to present, or to have it's
|
|
value changed, depending on which tests are selected:
|
|
|
|
present(0) - when this test is selected, the trigger fires
|
|
when the mteTriggerValueID object goes from absent to present.
|
|
|
|
absent(1) - when this test is selected, the trigger fires
|
|
when the mteTriggerValueID object goes from present to absent.
|
|
changed(2) - when this test is selected, the trigger fires
|
|
the mteTriggerValueID object value changes.
|
|
|
|
Once the trigger has fired for either presence or absence it
|
|
will not fire again for that state until the object has been
|
|
to the other state. "
|
|
DEFVAL { { present, absent } }
|
|
::= { mteTriggerExistenceEntry 1 }
|
|
|
|
mteTriggerExistenceStartup OBJECT-TYPE
|
|
SYNTAX BITS { present(0), absent(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether an event may be triggered when this entry
|
|
is first set to 'active' and the test specified by
|
|
mteTriggerExistenceTest is true. Setting an option causes
|
|
that trigger to fire when its test is true."
|
|
DEFVAL { { present, absent } }
|
|
::= { mteTriggerExistenceEntry 2 }
|
|
|
|
mteTriggerExistenceObjectsOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerExistenceObjects, the mteOwner of a
|
|
group of objects from mteObjectsTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerExistenceEntry 3 }
|
|
|
|
mteTriggerExistenceObjects OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteObjectsName of a group of objects from
|
|
mteObjectsTable. These objects are to be added to any
|
|
Notification resulting from the firing of this trigger for
|
|
this test.
|
|
|
|
A list of objects may also be added based on the overall
|
|
trigger, the event or other settings in mteTriggerTest.
|
|
|
|
A length of 0 indicates no additional objects."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerExistenceEntry 4 }
|
|
|
|
mteTriggerExistenceEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerExistenceEvent, the mteOwner of an event
|
|
entry from the mteEventTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerExistenceEntry 5 }
|
|
|
|
mteTriggerExistenceEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'existence' and this trigger fires. A length of 0 indicates no
|
|
event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerExistenceEntry 6 }
|
|
|
|
--
|
|
-- Trigger Boolean Table
|
|
--
|
|
|
|
mteTriggerBooleanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteTriggerBooleanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event trigger information for boolean
|
|
triggers."
|
|
::= { mteTrigger 5 }
|
|
|
|
|
|
mteTriggerBooleanEntry OBJECT-TYPE
|
|
SYNTAX MteTriggerBooleanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single boolean trigger. Entries
|
|
automatically exist in this this table for each mteTriggerEntry
|
|
that has 'boolean' set in mteTriggerTest."
|
|
INDEX { mteOwner, IMPLIED mteTriggerName }
|
|
::= { mteTriggerBooleanTable 1 }
|
|
|
|
MteTriggerBooleanEntry ::= SEQUENCE {
|
|
mteTriggerBooleanComparison INTEGER,
|
|
mteTriggerBooleanValue Integer32,
|
|
mteTriggerBooleanStartup TruthValue,
|
|
mteTriggerBooleanObjectsOwner SnmpAdminString,
|
|
mteTriggerBooleanObjects SnmpAdminString,
|
|
mteTriggerBooleanEventOwner SnmpAdminString,
|
|
mteTriggerBooleanEvent SnmpAdminString
|
|
}
|
|
|
|
mteTriggerBooleanComparison OBJECT-TYPE
|
|
SYNTAX INTEGER { unequal(1), equal(2),
|
|
less(3), lessOrEqual(4),
|
|
greater(5), greaterOrEqual(6) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of boolean comparison to perform.
|
|
|
|
The value at mteTriggerValueID is compared to
|
|
mteTriggerBooleanValue, so for example if
|
|
mteTriggerBooleanComparison is 'less' the result would be true
|
|
if the value at mteTriggerValueID is less than the value of
|
|
mteTriggerBooleanValue."
|
|
DEFVAL { unequal }
|
|
::= { mteTriggerBooleanEntry 1 }
|
|
|
|
mteTriggerBooleanValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to use for the test specified by
|
|
mteTriggerBooleanTest."
|
|
DEFVAL { 0 }
|
|
::= { mteTriggerBooleanEntry 2 }
|
|
|
|
|
|
|
|
mteTriggerBooleanStartup OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether an event may be triggered when this entry
|
|
is first set to 'active' or a new instance of the object at
|
|
mteTriggerValueID is found and the test specified by
|
|
mteTriggerBooleanComparison is true. In that case an event is
|
|
triggered if mteTriggerBooleanStartup is 'true'."
|
|
DEFVAL { true }
|
|
::= { mteTriggerBooleanEntry 3 }
|
|
|
|
mteTriggerBooleanObjectsOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerBooleanObjects, the mteOwner of a group
|
|
of objects from mteObjectsTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerBooleanEntry 4 }
|
|
|
|
mteTriggerBooleanObjects OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteObjectsName of a group of objects from
|
|
mteObjectsTable. These objects are to be added to any
|
|
Notification resulting from the firing of this trigger for
|
|
this test.
|
|
|
|
A list of objects may also be added based on the overall
|
|
trigger, the event or other settings in mteTriggerTest.
|
|
|
|
A length of 0 indicates no additional objects."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerBooleanEntry 5 }
|
|
|
|
mteTriggerBooleanEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerBooleanEvent, the mteOwner of an event
|
|
entry from mteEventTable."
|
|
DEFVAL { ''H }
|
|
|
|
|
|
::= { mteTriggerBooleanEntry 6 }
|
|
|
|
mteTriggerBooleanEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'boolean' and this trigger fires. A length of 0 indicates no
|
|
event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerBooleanEntry 7 }
|
|
|
|
--
|
|
-- Trigger Threshold Table
|
|
--
|
|
|
|
mteTriggerThresholdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteTriggerThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event trigger information for threshold
|
|
triggers."
|
|
::= { mteTrigger 6 }
|
|
|
|
mteTriggerThresholdEntry OBJECT-TYPE
|
|
SYNTAX MteTriggerThresholdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single threshold trigger. Entries
|
|
automatically exist in this table for each mteTriggerEntry
|
|
that has 'threshold' set in mteTriggerTest."
|
|
INDEX { mteOwner, IMPLIED mteTriggerName }
|
|
::= { mteTriggerThresholdTable 1 }
|
|
|
|
MteTriggerThresholdEntry ::= SEQUENCE {
|
|
mteTriggerThresholdStartup INTEGER,
|
|
mteTriggerThresholdRising Integer32,
|
|
mteTriggerThresholdFalling Integer32,
|
|
mteTriggerThresholdDeltaRising Integer32,
|
|
mteTriggerThresholdDeltaFalling Integer32,
|
|
mteTriggerThresholdObjectsOwner SnmpAdminString,
|
|
mteTriggerThresholdObjects SnmpAdminString,
|
|
mteTriggerThresholdRisingEventOwner SnmpAdminString,
|
|
mteTriggerThresholdRisingEvent SnmpAdminString,
|
|
mteTriggerThresholdFallingEventOwner SnmpAdminString,
|
|
|
|
|
|
mteTriggerThresholdFallingEvent SnmpAdminString,
|
|
mteTriggerThresholdDeltaRisingEventOwner SnmpAdminString,
|
|
mteTriggerThresholdDeltaRisingEvent SnmpAdminString,
|
|
mteTriggerThresholdDeltaFallingEventOwner SnmpAdminString,
|
|
mteTriggerThresholdDeltaFallingEvent SnmpAdminString
|
|
}
|
|
|
|
mteTriggerThresholdStartup OBJECT-TYPE
|
|
SYNTAX INTEGER { rising(1), falling(2), risingOrFalling(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The event that may be triggered when this entry is first
|
|
set to 'active' and a new instance of the object at
|
|
mteTriggerValueID is found. If the first sample after this
|
|
instance becomes active is greater than or equal to
|
|
mteTriggerThresholdRising and mteTriggerThresholdStartup is
|
|
equal to 'rising' or 'risingOrFalling', then one
|
|
mteTriggerThresholdRisingEvent is triggered for that instance.
|
|
If the first sample after this entry becomes active is less
|
|
than or equal to mteTriggerThresholdFalling and
|
|
mteTriggerThresholdStartup is equal to 'falling' or
|
|
'risingOrFalling', then one mteTriggerThresholdRisingEvent is
|
|
triggered for that instance."
|
|
DEFVAL { risingOrFalling }
|
|
::= { mteTriggerThresholdEntry 1 }
|
|
|
|
mteTriggerThresholdRising OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold value to check against if mteTriggerType is
|
|
'threshold'.
|
|
|
|
When the current sampled value is greater than or equal to
|
|
this threshold, and the value at the last sampling interval
|
|
was less than this threshold, one
|
|
mteTriggerThresholdRisingEvent is triggered. That event is
|
|
also triggered if the first sample after this entry becomes
|
|
active is greater than or equal to this threshold and
|
|
mteTriggerThresholdStartup is equal to 'rising' or
|
|
'risingOrFalling'.
|
|
|
|
After a rising event is generated, another such event is not
|
|
triggered until the sampled value falls below this threshold
|
|
and reaches mteTriggerThresholdFalling."
|
|
DEFVAL { 0 }
|
|
|
|
|
|
::= { mteTriggerThresholdEntry 2 }
|
|
|
|
mteTriggerThresholdFalling OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold value to check against if mteTriggerType is
|
|
'threshold'.
|
|
|
|
When the current sampled value is less than or equal to this
|
|
threshold, and the value at the last sampling interval was
|
|
greater than this threshold, one
|
|
mteTriggerThresholdFallingEvent is triggered. That event is
|
|
also triggered if the first sample after this entry becomes
|
|
active is less than or equal to this threshold and
|
|
mteTriggerThresholdStartup is equal to 'falling' or
|
|
'risingOrFalling'.
|
|
|
|
After a falling event is generated, another such event is not
|
|
triggered until the sampled value rises above this threshold
|
|
and reaches mteTriggerThresholdRising."
|
|
DEFVAL { 0 }
|
|
::= { mteTriggerThresholdEntry 3 }
|
|
|
|
mteTriggerThresholdDeltaRising OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold value to check against if mteTriggerType is
|
|
'threshold'.
|
|
|
|
When the delta value (difference) between the current sampled
|
|
value (value(n)) and the previous sampled value (value(n-1))
|
|
is greater than or equal to this threshold,
|
|
and the delta value calculated at the last sampling interval
|
|
(i.e. value(n-1) - value(n-2)) was less than this threshold,
|
|
one mteTriggerThresholdDeltaRisingEvent is triggered. That event
|
|
is also triggered if the first delta value calculated after this
|
|
entry becomes active, i.e. value(2) - value(1), where value(1)
|
|
is the first sample taken of that instance, is greater than or
|
|
equal to this threshold.
|
|
|
|
After a rising event is generated, another such event is not
|
|
triggered until the delta value falls below this threshold and
|
|
reaches mteTriggerThresholdDeltaFalling."
|
|
DEFVAL { 0 }
|
|
|
|
|
|
::= { mteTriggerThresholdEntry 4 }
|
|
|
|
mteTriggerThresholdDeltaFalling OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A threshold value to check against if mteTriggerType is
|
|
'threshold'.
|
|
|
|
When the delta value (difference) between the current sampled
|
|
value (value(n)) and the previous sampled value (value(n-1))
|
|
is less than or equal to this threshold,
|
|
and the delta value calculated at the last sampling interval
|
|
(i.e. value(n-1) - value(n-2)) was greater than this threshold,
|
|
one mteTriggerThresholdDeltaFallingEvent is triggered. That event
|
|
is also triggered if the first delta value calculated after this
|
|
entry becomes active, i.e. value(2) - value(1), where value(1)
|
|
is the first sample taken of that instance, is less than or
|
|
equal to this threshold.
|
|
|
|
After a falling event is generated, another such event is not
|
|
triggered until the delta value falls below this threshold and
|
|
reaches mteTriggerThresholdDeltaRising."
|
|
DEFVAL { 0 }
|
|
::= { mteTriggerThresholdEntry 5 }
|
|
|
|
mteTriggerThresholdObjectsOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerThresholdObjects, the mteOwner of a group
|
|
of objects from mteObjectsTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 6 }
|
|
|
|
mteTriggerThresholdObjects OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteObjectsName of a group of objects from
|
|
mteObjectsTable. These objects are to be added to any
|
|
Notification resulting from the firing of this trigger for
|
|
this test.
|
|
|
|
A list of objects may also be added based on the overall
|
|
|
|
|
|
trigger, the event or other settings in mteTriggerTest.
|
|
|
|
A length of 0 indicates no additional objects."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 7 }
|
|
|
|
mteTriggerThresholdRisingEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerThresholdRisingEvent, the mteOwner of an
|
|
event entry from mteEventTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 8 }
|
|
|
|
mteTriggerThresholdRisingEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'threshold' and this trigger fires based on
|
|
mteTriggerThresholdRising. A length of 0 indicates no event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 9 }
|
|
|
|
mteTriggerThresholdFallingEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerThresholdFallingEvent, the mteOwner of an
|
|
event entry from mteEventTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 10 }
|
|
|
|
mteTriggerThresholdFallingEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'threshold' and this trigger fires based on
|
|
mteTriggerThresholdFalling. A length of 0 indicates no event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 11 }
|
|
|
|
|
|
|
|
mteTriggerThresholdDeltaRisingEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner
|
|
of an event entry from mteEventTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 12 }
|
|
|
|
mteTriggerThresholdDeltaRisingEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'threshold' and this trigger fires based on
|
|
mteTriggerThresholdDeltaRising. A length of 0 indicates
|
|
no event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 13 }
|
|
|
|
mteTriggerThresholdDeltaFallingEventOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner
|
|
of an event entry from mteEventTable."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 14 }
|
|
|
|
mteTriggerThresholdDeltaFallingEvent OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteEventName of the event to invoke when mteTriggerType is
|
|
'threshold' and this trigger fires based on
|
|
mteTriggerThresholdDeltaFalling. A length of 0 indicates
|
|
no event."
|
|
DEFVAL { ''H }
|
|
::= { mteTriggerThresholdEntry 15 }
|
|
|
|
--
|
|
-- Objects Table
|
|
--
|
|
|
|
|
|
|
|
mteObjectsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that can be added to notifications based
|
|
on the trigger, trigger test, or event, as pointed to by
|
|
entries in those tables."
|
|
::= { mteObjects 1 }
|
|
|
|
mteObjectsEntry OBJECT-TYPE
|
|
SYNTAX MteObjectsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group of objects. Applications create and delete entries
|
|
using mteObjectsEntryStatus.
|
|
|
|
When adding objects to a notification they are added in the
|
|
lexical order of their index in this table. Those associated
|
|
with a trigger come first, then trigger test, then event."
|
|
INDEX { mteOwner, mteObjectsName, mteObjectsIndex }
|
|
::= { mteObjectsTable 1 }
|
|
|
|
MteObjectsEntry ::= SEQUENCE {
|
|
mteObjectsName SnmpAdminString,
|
|
mteObjectsIndex Unsigned32,
|
|
mteObjectsID OBJECT IDENTIFIER,
|
|
mteObjectsIDWildcard TruthValue,
|
|
mteObjectsEntryStatus RowStatus
|
|
}
|
|
|
|
mteObjectsName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A locally-unique, administratively assigned name for a group
|
|
of objects."
|
|
::= { mteObjectsEntry 1 }
|
|
|
|
mteObjectsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary integer for the purpose of identifying
|
|
individual objects within a mteObjectsName group.
|
|
|
|
|
|
Objects within a group are placed in the notification in the
|
|
numerical order of this index.
|
|
|
|
Groups are placed in the notification in the order of the
|
|
selections for overall trigger, trigger test, and event.
|
|
Within trigger test they are in the same order as the
|
|
numerical values of the bits defined for mteTriggerTest.
|
|
|
|
Bad object identifiers or a mismatch between truncating the
|
|
identifier and the value of mteDeltaDiscontinuityIDWildcard
|
|
result in operation as one would expect when providing the
|
|
wrong identifier to a Get operation. The Get will fail or get
|
|
the wrong object. If the object is not available it is omitted
|
|
from the notification."
|
|
::= { mteObjectsEntry 2 }
|
|
|
|
mteObjectsID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of a MIB object to add to a
|
|
Notification that results from the firing of a trigger.
|
|
|
|
This may be wildcarded by truncating all or part of the
|
|
instance portion, in which case the instance portion of the
|
|
OID for obtaining this object will be the same as that used
|
|
in obtaining the mteTriggerValueID that fired. If such
|
|
wildcarding is applied, mteObjectsIDWildcard must be
|
|
'true' and if not it must be 'false'.
|
|
|
|
Each instance that fills the wildcard is independent of any
|
|
additional instances, that is, wildcarded objects operate
|
|
as if there were a separate table entry for each instance
|
|
that fills the wildcard without having to actually predict
|
|
all possible instances ahead of time."
|
|
DEFVAL { zeroDotZero }
|
|
::= { mteObjectsEntry 3 }
|
|
|
|
mteObjectsIDWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether mteObjectsID is to be treated as
|
|
fully-specified or wildcarded, with 'true' indicating wildcard."
|
|
DEFVAL { false }
|
|
::= { mteObjectsEntry 4 }
|
|
|
|
|
|
mteObjectsEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows creation and deletion of entries.
|
|
Once made active an entry MAY not be modified except to
|
|
delete it."
|
|
::= { mteObjectsEntry 5 }
|
|
|
|
--
|
|
-- Event Section
|
|
--
|
|
|
|
-- Counters
|
|
|
|
mteEventFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an attempt to invoke an event
|
|
has failed. This counts individually for each
|
|
attempt in a group of targets or each attempt for a
|
|
wildcarded trigger object."
|
|
::= { mteEvent 1 }
|
|
|
|
--
|
|
-- Event Table
|
|
--
|
|
|
|
mteEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event action information."
|
|
::= { mteEvent 2 }
|
|
|
|
mteEventEntry OBJECT-TYPE
|
|
SYNTAX MteEventEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single event. Applications create and
|
|
delete entries using mteEventEntryStatus."
|
|
INDEX { mteOwner, IMPLIED mteEventName }
|
|
::= { mteEventTable 1 }
|
|
|
|
|
|
MteEventEntry ::= SEQUENCE {
|
|
mteEventName SnmpAdminString,
|
|
mteEventComment SnmpAdminString,
|
|
mteEventActions BITS,
|
|
mteEventEnabled TruthValue,
|
|
mteEventEntryStatus RowStatus
|
|
}
|
|
|
|
mteEventName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A locally-unique, administratively assigned name for the
|
|
event."
|
|
::= { mteEventEntry 1 }
|
|
|
|
mteEventComment OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A description of the event's function and use."
|
|
DEFVAL { ''H }
|
|
::= { mteEventEntry 2 }
|
|
|
|
mteEventActions OBJECT-TYPE
|
|
SYNTAX BITS { notification(0), set(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actions to perform when this event occurs.
|
|
|
|
For 'notification', Traps and/or Informs are sent according
|
|
to the configuration in the SNMP Notification MIB.
|
|
|
|
For 'set', an SNMP Set operation is performed according to
|
|
control values in this entry."
|
|
DEFVAL { {} } -- No bits set.
|
|
::= { mteEventEntry 3 }
|
|
|
|
mteEventEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to allow an event to be configured but not used.
|
|
When the value is 'false' the event does not execute even if
|
|
|
|
|
|
triggered."
|
|
DEFVAL { false }
|
|
::= { mteEventEntry 4 }
|
|
|
|
mteEventEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows creation and deletion of entries.
|
|
Once made active an entry MAY not be modified except to
|
|
delete it."
|
|
::= { mteEventEntry 5 }
|
|
|
|
--
|
|
-- Event Notification Table
|
|
--
|
|
|
|
mteEventNotificationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteEventNotificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of information about notifications to be sent as a
|
|
consequence of management events."
|
|
::= { mteEvent 3 }
|
|
|
|
mteEventNotificationEntry OBJECT-TYPE
|
|
SYNTAX MteEventNotificationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single event's notification. Entries
|
|
automatically exist in this this table for each mteEventEntry
|
|
that has 'notification' set in mteEventActions."
|
|
INDEX { mteOwner, IMPLIED mteEventName }
|
|
::= { mteEventNotificationTable 1 }
|
|
|
|
MteEventNotificationEntry ::= SEQUENCE {
|
|
mteEventNotification OBJECT IDENTIFIER,
|
|
mteEventNotificationObjectsOwner SnmpAdminString,
|
|
mteEventNotificationObjects SnmpAdminString
|
|
}
|
|
|
|
mteEventNotification OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION
|
|
"The object identifier from the NOTIFICATION-TYPE for the
|
|
notification to use if metEventActions has 'notification' set."
|
|
DEFVAL { zeroDotZero }
|
|
::= { mteEventNotificationEntry 1 }
|
|
|
|
mteEventNotificationObjectsOwner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To go with mteEventNotificationObjects, the mteOwner of a
|
|
group of objects from mteObjectsTable."
|
|
DEFVAL { ''H }
|
|
::= { mteEventNotificationEntry 2 }
|
|
|
|
mteEventNotificationObjects OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mteObjectsName of a group of objects from
|
|
mteObjectsTable if mteEventActions has 'notification' set.
|
|
These objects are to be added to any Notification generated by
|
|
this event.
|
|
|
|
Objects may also be added based on the trigger that stimulated
|
|
the event.
|
|
|
|
A length of 0 indicates no additional objects."
|
|
DEFVAL { ''H }
|
|
::= { mteEventNotificationEntry 3 }
|
|
|
|
--
|
|
-- Event Set Table
|
|
--
|
|
|
|
mteEventSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MteEventSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of management event action information."
|
|
::= { mteEvent 4 }
|
|
|
|
mteEventSetEntry OBJECT-TYPE
|
|
SYNTAX MteEventSetEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single event's set option. Entries
|
|
automatically exist in this this table for each mteEventEntry
|
|
that has 'set' set in mteEventActions."
|
|
INDEX { mteOwner, IMPLIED mteEventName }
|
|
::= { mteEventSetTable 1 }
|
|
|
|
MteEventSetEntry ::= SEQUENCE {
|
|
mteEventSetObject OBJECT IDENTIFIER,
|
|
mteEventSetObjectWildcard TruthValue,
|
|
mteEventSetValue Integer32,
|
|
mteEventSetTargetTag SnmpTagValue,
|
|
mteEventSetContextName SnmpAdminString,
|
|
mteEventSetContextNameWildcard TruthValue
|
|
}
|
|
|
|
mteEventSetObject OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier from the MIB object to set if
|
|
mteEventActions has 'set' set.
|
|
|
|
This object identifier may be wildcarded by leaving
|
|
sub-identifiers off the end, in which case
|
|
nteEventSetObjectWildCard must be 'true'.
|
|
|
|
If mteEventSetObject is wildcarded the instance used to set the
|
|
object to which it points is the same as the instance from the
|
|
value of mteTriggerValueID that triggered the event.
|
|
|
|
Each instance that fills the wildcard is independent of any
|
|
additional instances, that is, wildcarded objects operate
|
|
as if there were a separate table entry for each instance
|
|
that fills the wildcard without having to actually predict
|
|
all possible instances ahead of time.
|
|
|
|
Bad object identifiers or a mismatch between truncating the
|
|
identifier and the value of mteSetObjectWildcard
|
|
result in operation as one would expect when providing the
|
|
wrong identifier to a Set operation. The Set will fail or set
|
|
the wrong object. If the value syntax of the destination
|
|
object is not correct, the Set fails with the normal SNMP
|
|
error code."
|
|
DEFVAL { zeroDotZero }
|
|
::= { mteEventSetEntry 1 }
|
|
|
|
|
|
mteEventSetObjectWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control over whether mteEventSetObject is to be treated as
|
|
fully-specified or wildcarded, with 'true' indicating wildcard
|
|
if mteEventActions has 'set' set."
|
|
DEFVAL { false }
|
|
::= { mteEventSetEntry 2 }
|
|
|
|
mteEventSetValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to which to set the object at mteEventSetObject
|
|
if mteEventActions has 'set' set."
|
|
DEFVAL { 0 }
|
|
::= { mteEventSetEntry 3 }
|
|
|
|
mteEventSetTargetTag OBJECT-TYPE
|
|
SYNTAX SnmpTagValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tag for the target(s) at which to set the object at
|
|
mteEventSetObject to mteEventSetValue if mteEventActions
|
|
has 'set' set.
|
|
|
|
Systems limited to self management MAY reject a non-zero
|
|
length for the value of this object.
|
|
|
|
A length of 0 indicates the local system. In this case,
|
|
access to the objects indicated by mteEventSetObject is under
|
|
the security credentials of the requester that set
|
|
mteTriggerEntryStatus to 'active'. Those credentials are the
|
|
input parameters for isAccessAllowed from the Architecture for
|
|
Describing SNMP Management Frameworks.
|
|
|
|
Otherwise access rights are checked according to the security
|
|
parameters resulting from the tag."
|
|
DEFVAL { ''H }
|
|
::= { mteEventSetEntry 4 }
|
|
|
|
mteEventSetContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management context in which to set mteEventObjectID.
|
|
if mteEventActions has 'set' set.
|
|
|
|
This may be wildcarded by leaving characters off the end. To
|
|
indicate such wildcarding mteEventSetContextNameWildcard must
|
|
be 'true'.
|
|
|
|
If this context name is wildcarded the value used to complete
|
|
the wildcarding of mteTriggerContextName will be appended."
|
|
DEFVAL { ''H }
|
|
::= { mteEventSetEntry 5 }
|
|
|
|
mteEventSetContextNameWildcard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for whether mteEventSetContextName is to be treated as
|
|
fully-specified or wildcarded, with 'true' indicating wildcard
|
|
if mteEventActions has 'set' set."
|
|
DEFVAL { false }
|
|
::= { mteEventSetEntry 6 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
dismanEventMIBNotificationPrefix OBJECT IDENTIFIER ::=
|
|
{ dismanEventMIB 2 }
|
|
dismanEventMIBNotifications OBJECT IDENTIFIER ::=
|
|
{ dismanEventMIBNotificationPrefix 0 }
|
|
dismanEventMIBNotificationObjects OBJECT IDENTIFIER
|
|
::= { dismanEventMIBNotificationPrefix 1 }
|
|
|
|
--
|
|
-- Notification Objects
|
|
--
|
|
|
|
mteHotTrigger OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the trigger causing the notification."
|
|
::= { dismanEventMIBNotificationObjects 1 }
|
|
|
|
|
|
|
|
mteHotTargetName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP Target MIB's snmpTargetAddrName related to the
|
|
notification."
|
|
::= { dismanEventMIBNotificationObjects 2 }
|
|
|
|
mteHotContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The context name related to the notification. This MUST be as
|
|
fully-qualified as possible, including filling in wildcard
|
|
information determined in processing."
|
|
::= { dismanEventMIBNotificationObjects 3 }
|
|
|
|
mteHotOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the destination object related to the
|
|
notification. This MUST be as fully-qualified as possible,
|
|
including filling in wildcard information determined in
|
|
processing.
|
|
|
|
For a trigger-related notification this is from
|
|
mteTriggerValueID.
|
|
|
|
For a set failure this is from mteEventSetObject."
|
|
::= { dismanEventMIBNotificationObjects 4 }
|
|
|
|
mteHotValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the object at mteTriggerValueID when a
|
|
trigger fired."
|
|
::= { dismanEventMIBNotificationObjects 5 }
|
|
|
|
mteFailedReason OBJECT-TYPE
|
|
SYNTAX FailureReason
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION
|
|
"The reason for the failure of an attempt to check for a
|
|
trigger condition or set an object in response to an event."
|
|
::= { dismanEventMIBNotificationObjects 6 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
mteTriggerFired NOTIFICATION-TYPE
|
|
OBJECTS { mteHotTrigger,
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteHotValue }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that the trigger indicated by the object
|
|
instances has fired, for triggers with mteTriggerType
|
|
'boolean' or 'existence'."
|
|
::= { dismanEventMIBNotifications 1 }
|
|
|
|
mteTriggerRising NOTIFICATION-TYPE
|
|
OBJECTS { mteHotTrigger,
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteHotValue }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that the rising threshold was met for triggers
|
|
with mteTriggerType 'threshold'."
|
|
::= { dismanEventMIBNotifications 2 }
|
|
|
|
mteTriggerFalling NOTIFICATION-TYPE
|
|
OBJECTS { mteHotTrigger,
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteHotValue }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that the falling threshold was met for triggers
|
|
with mteTriggerType 'threshold'."
|
|
::= { dismanEventMIBNotifications 3 }
|
|
|
|
mteTriggerFailure NOTIFICATION-TYPE
|
|
OBJECTS { mteHotTrigger,
|
|
|
|
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteFailedReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that an attempt to check a trigger has failed.
|
|
|
|
The network manager must enable this notification only with
|
|
a certain fear and trembling, as it can easily crowd out more
|
|
important information. It should be used only to help diagnose
|
|
a problem that has appeared in the error counters and can not
|
|
be found otherwise."
|
|
::= { dismanEventMIBNotifications 4 }
|
|
|
|
mteEventSetFailure NOTIFICATION-TYPE
|
|
OBJECTS { mteHotTrigger,
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteFailedReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification that an attempt to do a set in response to an
|
|
event has failed.
|
|
|
|
The network manager must enable this notification only with
|
|
a certain fear and trembling, as it can easily crowd out more
|
|
important information. It should be used only to help diagnose
|
|
a problem that has appeared in the error counters and can not
|
|
be found otherwise."
|
|
::= { dismanEventMIBNotifications 5 }
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
|
|
dismanEventMIBConformance OBJECT IDENTIFIER ::= { dismanEventMIB 3 }
|
|
dismanEventMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ dismanEventMIBConformance 1 }
|
|
dismanEventMIBGroups OBJECT IDENTIFIER ::=
|
|
{ dismanEventMIBConformance 2 }
|
|
|
|
-- Compliance
|
|
|
|
dismanEventMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"The compliance statement for entities which implement
|
|
the Event MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
dismanEventResourceGroup,
|
|
dismanEventTriggerGroup,
|
|
dismanEventObjectsGroup,
|
|
dismanEventEventGroup,
|
|
dismanEventNotificationObjectGroup,
|
|
dismanEventNotificationGroup
|
|
}
|
|
|
|
OBJECT mteTriggerTargetTag
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, thus limiting
|
|
monitoring to the local system or pre-configured
|
|
remote systems."
|
|
|
|
OBJECT mteEventSetTargetTag
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, thus limiting
|
|
setting to the local system or pre-configured
|
|
remote systems."
|
|
|
|
OBJECT mteTriggerValueIDWildcard
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, thus allowing
|
|
the system not to implement wildcarding."
|
|
|
|
OBJECT mteTriggerContextNameWildcard
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, thus allowing
|
|
the system not to implement wildcarding."
|
|
|
|
|
|
OBJECT mteObjectsIDWildcard
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, thus allowing
|
|
the system not to implement wildcarding."
|
|
|
|
OBJECT mteEventSetContextNameWildcard
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
|
|
|
|
"Write access is not required, thus allowing
|
|
the system not to implement wildcarding."
|
|
|
|
::= { dismanEventMIBCompliances 1 }
|
|
|
|
-- Units of Conformance
|
|
|
|
dismanEventResourceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mteResourceSampleMinimum,
|
|
mteResourceSampleInstanceMaximum,
|
|
mteResourceSampleInstances,
|
|
mteResourceSampleInstancesHigh,
|
|
mteResourceSampleInstanceLacks
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event resource status and control objects."
|
|
::= { dismanEventMIBGroups 1 }
|
|
|
|
dismanEventTriggerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mteTriggerFailures,
|
|
|
|
mteTriggerComment,
|
|
mteTriggerTest,
|
|
mteTriggerSampleType,
|
|
mteTriggerValueID,
|
|
mteTriggerValueIDWildcard,
|
|
mteTriggerTargetTag,
|
|
mteTriggerContextName,
|
|
mteTriggerContextNameWildcard,
|
|
mteTriggerFrequency,
|
|
mteTriggerObjectsOwner,
|
|
mteTriggerObjects,
|
|
mteTriggerEnabled,
|
|
mteTriggerEntryStatus,
|
|
|
|
mteTriggerDeltaDiscontinuityID,
|
|
mteTriggerDeltaDiscontinuityIDWildcard,
|
|
mteTriggerDeltaDiscontinuityIDType,
|
|
mteTriggerExistenceTest,
|
|
mteTriggerExistenceStartup,
|
|
mteTriggerExistenceObjectsOwner,
|
|
mteTriggerExistenceObjects,
|
|
mteTriggerExistenceEventOwner,
|
|
mteTriggerExistenceEvent,
|
|
|
|
|
|
|
|
mteTriggerBooleanComparison,
|
|
mteTriggerBooleanValue,
|
|
mteTriggerBooleanStartup,
|
|
mteTriggerBooleanObjectsOwner,
|
|
mteTriggerBooleanObjects,
|
|
mteTriggerBooleanEventOwner,
|
|
mteTriggerBooleanEvent,
|
|
|
|
mteTriggerThresholdStartup,
|
|
mteTriggerThresholdObjectsOwner,
|
|
mteTriggerThresholdObjects,
|
|
mteTriggerThresholdRising,
|
|
mteTriggerThresholdFalling,
|
|
mteTriggerThresholdDeltaRising,
|
|
mteTriggerThresholdDeltaFalling,
|
|
mteTriggerThresholdRisingEventOwner,
|
|
mteTriggerThresholdRisingEvent,
|
|
mteTriggerThresholdFallingEventOwner,
|
|
mteTriggerThresholdFallingEvent,
|
|
mteTriggerThresholdDeltaRisingEventOwner,
|
|
mteTriggerThresholdDeltaRisingEvent,
|
|
mteTriggerThresholdDeltaFallingEventOwner,
|
|
mteTriggerThresholdDeltaFallingEvent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Event triggers."
|
|
::= { dismanEventMIBGroups 2 }
|
|
|
|
dismanEventObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mteObjectsID,
|
|
mteObjectsIDWildcard,
|
|
mteObjectsEntryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supplemental objects."
|
|
::= { dismanEventMIBGroups 3 }
|
|
|
|
dismanEventEventGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mteEventFailures,
|
|
|
|
mteEventComment,
|
|
mteEventActions,
|
|
mteEventEnabled,
|
|
mteEventEntryStatus,
|
|
|
|
|
|
mteEventNotification,
|
|
mteEventNotificationObjectsOwner,
|
|
mteEventNotificationObjects,
|
|
|
|
mteEventSetObject,
|
|
mteEventSetObjectWildcard,
|
|
mteEventSetValue,
|
|
mteEventSetTargetTag,
|
|
mteEventSetContextName,
|
|
mteEventSetContextNameWildcard
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Events."
|
|
::= { dismanEventMIBGroups 4 }
|
|
|
|
dismanEventNotificationObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mteHotTrigger,
|
|
mteHotTargetName,
|
|
mteHotContextName,
|
|
mteHotOID,
|
|
mteHotValue,
|
|
mteFailedReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification objects."
|
|
::= { dismanEventMIBGroups 5 }
|
|
|
|
dismanEventNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
mteTriggerFired,
|
|
mteTriggerRising,
|
|
mteTriggerFalling,
|
|
mteTriggerFailure,
|
|
mteEventSetFailure
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notifications."
|
|
::= { dismanEventMIBGroups 6 }
|
|
|
|
END
|