tyler.durden
/
pandorafms
mirror of https://github.com/pandorafms/pandorafms.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
pandorafms/pandora_console/attachment/mibs/CPQSTSYS-MIB

4059 lines
132 KiB
Plaintext
Raw Blame History

-- ****************************************************************************
--
-- Storage Systems
-- Management Information Base for SNMP Network Management
--
--
-- Copyright 1992,2007 Hewlett-Packard Development Company, L.P.
-- Hewlett-Packard Company shall not be liable for technical or
-- editorial errors or omissions contained herein. The information in
-- this document is provided "as is" without warranty of any kind and
-- is subject to change without notice. The warranties for HP products
-- are set forth in the express limited warranty statements
-- accompanying such products. Nothing herein should be construed as
-- constituting an additional warranty.
--
-- Confidential computer software. Valid license from HP required for
-- possession, use or copying. Consistent with FAR 12.211 and 12.212,
-- Commercial Computer Software, Computer Software Documentation, and
-- Technical Data for Commercial Items are licensed to the U.S.
-- Government under vendor's standard commercial license.
--
-- Refer to the READMIB.RDM file for more information about the
-- organization of the information in the Compaq Enterprise.
--
-- The Compaq Enterprise number is 232.
-- The ASN.1 prefix to, and including the Compaq Enterprise is:
-- 1.3.6.1.4.1.232
--
-- ****************************************************************************
CPQSTSYS-MIB DEFINITIONS ::= BEGIN
IMPORTS
compaq FROM CPQHOST-MIB
-- enterprises FROM RFC1155-SMI
Counter FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
sysName FROM RFC1213-MIB
cpqHoTrapFlags FROM CPQHOST-MIB;
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
cpqSsStorageSys OBJECT IDENTIFIER ::= { compaq 8 }
cpqSsMibRev OBJECT IDENTIFIER ::= { cpqSsStorageSys 1 }
cpqSsDrvBox OBJECT IDENTIFIER ::= { cpqSsStorageSys 2 }
cpqSsTrap OBJECT IDENTIFIER ::= { cpqSsStorageSys 3 }
cpqSsRaidSystem OBJECT IDENTIFIER ::= { cpqSsStorageSys 4 }
cpqSsBoxExtended OBJECT IDENTIFIER ::= { cpqSsDrvBox 2 }
-- ****************************************************************************
-- Storage System MIB Revision
-- ===========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsMibRev Group (1.3.6.1.4.1.232.8.1)
--
--
-- An agent conforming to this document will return a cpqSsMibRevMajor
-- of one (1) and a cpqSsMibRevMinor of thirty one (31).
--
-- Implementation of the MibRev group is mandatory.
--
-- ****************************************************************************
cpqSsMibRevMajor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Major Revision level.
A change in the major revision level represents a major change in
the architecture of the MIB. A change in the major revision level
may indicate a significant change in the information supported
and/or the meaning of the supported information, correct
interpretation of data may require a MIB document with the same
major revision level."
::= { cpqSsMibRev 1 }
cpqSsMibRevMinor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Minor Revision level.
A change in the minor revision level may represent some minor
additional support; no changes to any pre-existing information
has occurred."
::= { cpqSsMibRev 2 }
cpqSsMibCondition OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The overall condition (status) of the system represented by
this MIB."
::= { cpqSsMibRev 3 }
-- ****************************************************************************
-- Storage System Drive Box Group
-- ==============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsDrvBoxTable (1.3.6.1.4.1.232.8.2.1)
--
-- Implementation of the Drive Box group is mandatory.
--
-- ****************************************************************************
cpqSsDrvBoxTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsDrvBoxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Box Table."
::= { cpqSsDrvBox 1 }
cpqSsDrvBoxEntry OBJECT-TYPE
SYNTAX CpqSsDrvBoxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Box Entry."
INDEX { cpqSsBoxCntlrIndex, cpqSsBoxBusIndex }
::= { cpqSsDrvBoxTable 1 }
CpqSsDrvBoxEntry ::= SEQUENCE
{
cpqSsBoxCntlrIndex INTEGER,
cpqSsBoxBusIndex INTEGER,
cpqSsBoxType INTEGER,
cpqSsBoxModel DisplayString,
cpqSsBoxFWRev DisplayString,
cpqSsBoxVendor DisplayString,
cpqSsBoxFanStatus INTEGER,
cpqSsBoxCondition INTEGER,
cpqSsBoxTempStatus INTEGER,
cpqSsBoxSidePanelStatus INTEGER,
cpqSsBoxFltTolPwrSupplyStatus INTEGER,
cpqSsBoxBackPlaneVersion INTEGER,
cpqSsBoxTotalBays INTEGER,
cpqSsBoxPlacement INTEGER,
cpqSsBoxDuplexOption INTEGER,
cpqSsBoxBoardRevision INTEGER,
cpqSsBoxSerialNumber DisplayString,
cpqSsBoxCntlrHwLocation DisplayString,
cpqSsBoxBackplaneSpeed INTEGER,
cpqSsBoxConnectionType INTEGER,
cpqSsBoxHostConnector DisplayString,
cpqSsBoxBoxOnConnector INTEGER,
cpqSsBoxLocationString DisplayString
}
cpqSsBoxCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Controller Index.
The controller index indicates to which adapter card instance
this table entry belongs."
::= { cpqSsDrvBoxEntry 1 }
cpqSsBoxBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Bus Index.
The bus index indicates to which bus instance on an adapter card
this table entry belongs."
::= { cpqSsDrvBoxEntry 2 }
cpqSsBoxType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
proLiant(2),
proLiant2(3),
proLiant2Internal(4),
proLiant2DuplexTop(5),
proLiant2DuplexBottom(6),
proLiant2InternalDuplexTop(7),
proLiant2InternalDuplexBottom(8)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Box Type.
This is the type of drive box. The following types are defined:
other(1)
The agent does not recognize this drive storage system.
proLiant(2)
This is a ProLiant Storage System.
proLiant2(3)
This is a ProLiant-2 Storage System.
proLiant2Internal(4)
This is an internal ProLiant-2 Storage System that is found
in some servers.
proLiant2DuplexTop(5)
This is the top portion of a ProLiant-2 Storage System that
has dual SCSI busses which are duplexed.
proLiant2DuplexBottom(6)
This is the bottom portion of a ProLiant-2 Storage System that
has dual SCSI busses which are duplexed.
proLiant2InternalDuplexTop(7)
This is the top portion of a ProLiant Server into which the
internal SCSI busses are duplexed.
proLiant2InternalDuplexBottom(8)
This is the bottom portion of a ProLiant Server into which the
internal SCSI busses are duplexed."
::= { cpqSsDrvBoxEntry 3 }
cpqSsBoxModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Model.
This is a description of the drive box's model.
This can be used for identification purposes."
::= { cpqSsDrvBoxEntry 4 }
cpqSsBoxFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Firmware Revision.
This is the revision level of the drive box.
This can be used for identification purposes."
::= { cpqSsDrvBoxEntry 5 }
cpqSsBoxVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Vendor
This is the drive box's vendor name.
This can be used for identification purposes."
::= { cpqSsDrvBoxEntry 6 }
cpqSsBoxFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
noFan(4),
degraded(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Fan Status.
This is the current status of the fans in the drive box.
This value will be one of the following:
other(1)
Fan monitoring is not supported by this system
or it is not supported by the driver.
ok(2)
All fans are working normally.
failed(3)
One or more storage system fans have failed. The fan(s) should
be replaced immediately to avoid hardware damage.
noFan(4)
This unit does not support fan monitoring.
degraded(5)
At least one storage system fan has failed, but there is still
sufficient cooling capacity to allow the system to continue.
The fan should be replaced."
::= { cpqSsDrvBoxEntry 7 }
cpqSsBoxCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Drive Box Condition.
This is the overall condition of the drive box.
The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The storage system is operating normally. No user
action is required.
degraded(3)
The storage system is degraded. You need to check the
temperature status or power supply status of this
storage system. Additionally, if the side panel for
the storage system is removed, the air flow changes
could result in improper cooling of the drives and affect
the temperature status.
failed(4)
The storage system has failed."
::= { cpqSsDrvBoxEntry 8 }
cpqSsBoxTempStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4),
noTemp(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the drive system.
This value will be one of the following:
other(1)
Temperature monitoring is not supported by this system
or it is not supported by the driver.
ok(2)
The temperature is within normal operating range.
degraded(3)
The temperature is outside of normal operating range.
failed(4)
The temperature could permanently damage the system.
The storage system will automatically shutdown if this
condition is detected.
noTemp(5)
This unit does not support temperature monitoring."
::= { cpqSsDrvBoxEntry 9 }
cpqSsBoxSidePanelStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sidePanelInPlace(2),
sidePanelRemoved(3),
noSidePanelStatus(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Side Panel Status.
This value will be one of the following:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
sidePanelInPlace(2)
The side panel is properly installed on the storage system.
sidePanelRemoved(3)
The side panel is not properly installed on the storage system.
noSidePanelStatus(4)
This unit does not support side panel status monitoring."
::= { cpqSsDrvBoxEntry 10 }
cpqSsBoxFltTolPwrSupplyStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4),
noFltTolPower(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value specifies the overall status of the fault tolerant
power supply sub-system in a drive box.
This value will be one of the following:
other(1)
The power supply status cannot be determined.
ok(2)
There are no detected power supply failures.
degraded(3)
One of the power supply units in a fault tolerant power
supply has failed.
failed(4)
No failure conditions can currently be determined.
noFltTolPower(5)
This unit does not support fault tolerant power supply
monitoring."
::= { cpqSsDrvBoxEntry 11 }
cpqSsBoxBackPlaneVersion OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
proLiant(2),
proLiant2(3),
proLiant3(4),
proLiant4(5),
proLiant5(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Back Plane Version.
This is the version of the drive box back plane. The following
types are defined:
other(1)
The agent does not recognize this drive storage system back
plane.
proLiant(2)
This is a ProLiant Storage System.
proLiant2(3)
This is a ProLiant-2 Storage System.
proLiant3(4)
This is a ProLiant-3 Storage System.
proLiant4(5)
This is a 4th generation Proliant Storage System.
proLiant5(6)
This is a 5th generation ProLiant Storage System."
::= { cpqSsDrvBoxEntry 12 }
cpqSsBoxTotalBays OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Total Bays.
This is the total number of bays in this storage system."
::= { cpqSsDrvBoxEntry 13 }
cpqSsBoxPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Placement.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
located internal or external to the system chassis.
internal(2)
The storage system is located in the system chassis.
external(3)
The storage system is located outside the system chassis
in an expansion box."
::= { cpqSsDrvBoxEntry 14 }
cpqSsBoxDuplexOption OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notDuplexed(2),
duplexTop(3),
duplexBottom(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Duplex Option.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
duplexed.
notDuplexed(2)
This storage system is not duplexed.
duplexTop(3)
This is the top portion of a duplexed storage system.
duplexBottom(4)
This is the bottom portion of a duplexed storage system."
::= { cpqSsDrvBoxEntry 15 }
cpqSsBoxBoardRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Board Revision.
This is the board revision of this storage system backplane."
::= { cpqSsDrvBoxEntry 16 }
cpqSsBoxSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Serial Number.
This is the drive box's serial number which is normally display
on the front panel. This can be used for identification
purposes."
::= { cpqSsDrvBoxEntry 17 }
cpqSsBoxCntlrHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the hardware location of the controller
to which this box is attached. A NULL string indicates that
the hardware location could not be determined or is irrelevant."
::= { cpqSsDrvBoxEntry 18 }
cpqSsBoxBackplaneSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ultra3(2),
ultra320(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Backplane Speed.
The following values are defined:
other(1)
The agent is unable to determine the backplane speed for this
storage system.
ultra3(2)
This storage system is capable of Ultra3 speeds.
ultra320(3)
This storage system is capable of Ultra320 speeds."
::= { cpqSsDrvBoxEntry 19 }
cpqSsBoxConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
scsiAttached(2),
sasAttached(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Connection Type.
The following values are defined:
other(1)
The agent is unable to determine the type of connection to
this storage system.
scsiAttached(2)
This storage system is attached to the host via SCSI.
sasAttached(3)
This storage system is attached to the host via SAS."
::= { cpqSsDrvBoxEntry 20 }
cpqSsBoxHostConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Host Connector.
This is the host connector to which the drive box is attached.
If the host connector cannot be determined, the agent will
return a NULL string."
::= { cpqSsDrvBoxEntry 21 }
cpqSsBoxBoxOnConnector OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box, Box on Connector.
The box on connector indicates which box instance this table
entry belongs. The instances start at one and increment for
each box attached to a connector. If the value cannot be
determined or does not apply, -1 is returned."
::= { cpqSsDrvBoxEntry 22 }
cpqSsBoxLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Location String.
This string describes the location of the drive box in relation
to the controller to which it is attached. If the location
string cannot be determined, the agent will return a NULL string."
::= { cpqSsDrvBoxEntry 23 }
-- ****************************************************************************
-- Storage System Chassis Group
-- ============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsChassisTable (1.3.6.1.4.1.232.8.2.2.1)
--
-- ****************************************************************************
cpqSsChassisTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsChassisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Chassis Table."
::= { cpqSsBoxExtended 1 }
cpqSsChassisEntry OBJECT-TYPE
SYNTAX CpqSsChassisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Chassis Entry."
INDEX { cpqSsChassisIndex }
::= { cpqSsChassisTable 1 }
CpqSsChassisEntry ::= SEQUENCE
{
cpqSsChassisIndex INTEGER,
cpqSsChassisConnectionType INTEGER,
cpqSsChassisSerialNumber DisplayString,
cpqSsChassisName DisplayString,
cpqSsChassisSystemBoardSerNum DisplayString,
cpqSsChassisSystemBoardRev DisplayString,
cpqSsChassisPowerBoardSerNum DisplayString,
cpqSsChassisPowerBoardRev DisplayString,
cpqSsChassisScsiBoardSerNum DisplayString,
cpqSsChassisScsiBoardRev DisplayString,
cpqSsChassisOverallCondition INTEGER,
cpqSsChassisPowerSupplyCondition INTEGER,
cpqSsChassisFanCondition INTEGER,
cpqSsChassisTemperatureCondition INTEGER,
cpqSsChassisFcaCntlrCondition INTEGER,
cpqSsChassisFcaLogicalDriveCondition INTEGER,
cpqSsChassisFcaPhysDrvCondition INTEGER,
cpqSsChassisTime INTEGER,
cpqSsChassisModel INTEGER,
cpqSsChassisBackplaneCondition INTEGER,
cpqSsChassisFcaTapeDrvCondition INTEGER,
cpqSsChassisRsoStatus INTEGER,
cpqSsChassisRsoCondition INTEGER,
cpqSsChassisScsiIoModuleType INTEGER,
cpqSsChassisPreferredPathMode INTEGER,
cpqSsChassisProductId DisplayString
}
cpqSsChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsChassisEntry 1 }
cpqSsChassisConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
fibreAttached(2),
scsiAttached(3),
iScsiAttached(4),
sasAttached(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Connection Type.
The following values are defined:
other(1)
The agent is unable to determine the type of connection to
this chassis.
fibreAttached(2)
This chassis is attached to the server via Fibre Channel.
scsiAttached(3)
This chassis is attached to the server via SCSI.
iScsiAttached(4)
This chassis is attached to the server via iSCSI.
sasAttached(5)
This chassis is attached to the server via SAS."
::= { cpqSsChassisEntry 2 }
cpqSsChassisSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Serial Number.
This is the storage system chassis's serial number which is normally
displayed on the front panel. This can be used for identification
purposes."
::= { cpqSsChassisEntry 3 }
cpqSsChassisName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Name.
This is a user defined name for this storage system chassis."
::= { cpqSsChassisEntry 4 }
cpqSsChassisSystemBoardSerNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis System Controller Board Serial Number.
This is the system controller board's serial number. This can be
used for identification purposes."
::= { cpqSsChassisEntry 5 }
cpqSsChassisSystemBoardRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis System Controller Board Revision.
This is the system controller board revision."
::= { cpqSsChassisEntry 6 }
cpqSsChassisPowerBoardSerNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Power Backplane Board Serial Number.
This is the power backplane board's serial number. This can be used
for identification purposes."
::= { cpqSsChassisEntry 7 }
cpqSsChassisPowerBoardRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Power Backplane Board Revision.
This is the power backplane board revision."
::= { cpqSsChassisEntry 8 }
cpqSsChassisScsiBoardSerNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis SCSI Drive Backplane Board Serial
Number.
This is the SCSI drive backplane board's serial number. This can be
used for identification purposes."
::= { cpqSsChassisEntry 9 }
cpqSsChassisScsiBoardRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis SCSI Drive Backplane Board Revision.
This is the SCSI drive backplane board revision."
::= { cpqSsChassisEntry 10 }
cpqSsChassisOverallCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Overall Condition.
This is the condition of the storage system chassis and all of its
components. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The storage system is operating normally. No user
action is required.
degraded(3)
The storage system chassis is degraded.
failed(4)
The storage system chassis is failed."
::= { cpqSsChassisEntry 11 }
cpqSsChassisPowerSupplyCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Condition.
This is the aggregate condition of all power supplies in
the storage system chassis. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
All power supplies are operating normally.
degraded(3)
At least one power supply is degraded or failed.
failed(4)
All power supplies are failed."
::= { cpqSsChassisEntry 12 }
cpqSsChassisFanCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Condition.
This is the aggregate condition of all fan modules in the
storage system chassis. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
All fan modules are operating normally.
degraded(3)
At least one fan module is degraded.
failed(4)
At least one fan module is failed."
::= { cpqSsChassisEntry 13 }
cpqSsChassisTemperatureCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Condition.
This is the aggregate condition of all the temperatur sensors
in the storage system chassis. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
All temperature sensors are reading within normal limits.
degraded(3)
At least one temperature sensor is reading degraded.
failed(4)
At least one temperature sensor is reading failed."
::= { cpqSsChassisEntry 14 }
cpqSsChassisFcaCntlrCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Channel Array Controller Condition.
This is the aggregate condition of all Fibre Channel Array controllers
in the storage system chassis. The following values are defined:
other(1)
The condition cannot be determined or is not supported on
this storage system.
ok(2)
All Fibre Channel Array Controllers are operating normally.
degraded(3)
At least one Fibre Channel Array Controller is degraded or
failed.
failed(4)
All Fibre Channel Array Controllers are failed."
::= { cpqSsChassisEntry 15 }
cpqSsChassisFcaLogicalDriveCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Channel Array Logical Drive Condition.
This is the aggregate condition of all Fibre Channel Array Logical
Drives in this storage system chassis.
The following values are defined:
other(1)
The condition cannot be determined or is not supported on
this storage system.
ok(2)
All Fibre Channel Array Controllers Logical Drives are
operating normally.
degraded(3)
At least one Fibre Channel Array Controller Logical Drive
is degraded.
failed(4)
At least one Fibre Channel Array Controller Logical Drive
is failed."
::= { cpqSsChassisEntry 16 }
cpqSsChassisFcaPhysDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Channel Array Physical Drive Condition.
This is the aggregate condition of all Fibre Channel Array Physical
Drives in this storage system chassis.
The following values are defined:
other(1)
The condition cannot be determined or is not supported on
this storage system.
ok(2)
All Fibre Channel Array Controllers Physical Drives are
operating normally.
degraded(3)
At least one Fibre Channel Array Controller Physical Drive
is degraded.
failed(4)
At least one Fibre Channel Array Controller Physical Drive
is failed."
::= { cpqSsChassisEntry 17 }
cpqSsChassisTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Time.
This is the storage system chassis's time in tenths of seconds.
If the chassis time is not supported, the agent will return 0."
::= { cpqSsChassisEntry 18 }
cpqSsChassisModel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ra4x00(2),
msa1000(3),
smartArrayClusterStorage(4),
enterpriseModularArray(5),
enterpriseVirtualArray(6),
msa500G2(7),
msa20(8),
msa1500cs(9),
msa1510i(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Model.
The following values are defined:
other(1)
The agent is unable to determine the model of this chassis.
ra4x00(2)
Compaq StorageWorks RAID Array 4000/4100.
msa1000(3)
Compaq StorageWorks Modular Smart Array 1000.
smartArrayClusterStorage(4)
HP StorageWorks Modular Smart Array 500
(Formerly Smart Array Cluster Storage).
enterpriseModularArray(5)
Compaq StorageWorks Enterprise/Modular RAID Array.
enterpriseVirtualArray(6)
Compaq StorageWorks Enterprise Virtual Array.
msa500G2(7)
HP StorageWorks Modular Smart Array 500 G2.
msa20(8)
HP StorageWorks Modular Smart Array 20.
msa1500cs(9)
HP StorageWorks Modular Smart Array 1500 CS.
msa1510i(10)
HP StorageWorks Modular Smart Array 1510i.
Reserved(11)
Reserved(12)"
::= { cpqSsChassisEntry 19 }
cpqSsChassisBackplaneCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Condition.
This is the aggregate condition of all the backplanes for the
storage system chassis. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
All backplanes are operating normally.
degraded(3)
At least one storage system is degraded.
failed(4)
At least one storage system is failed."
::= { cpqSsChassisEntry 20 }
cpqSsChassisFcaTapeDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Array Tape Drive Condition.
This is the aggregate condition of all tape drives in this storage
system chassis.
The following values are defined:
other(1)
The condition cannot be determined or is not supported on
this storage system.
ok(2)
All tape drives are operating normally.
degraded(3)
At least one tape drive is degraded.
failed(4)
At least one tape drive is failed."
::= { cpqSsChassisEntry 21 }
cpqSsChassisRsoStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
notConfigured(3),
disabled(4),
daemonDownDisabled(5),
ok(6),
daemonDownActive(7),
noSecondary(8),
daemonDownNoSecondary(9),
linkDown(10),
daemonDownLinkDown(11),
secondaryRunningAuto(12),
secondaryRunningUser(13),
evTimeoutError(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Recovery Server Option Status.
The following values are defined:
other(1)
The recovery server option status cannot be determined for
this storage system.
notSupported(2)
The recovery server option is not supported for this storage
system.
notConfigured(3)
The recovery server option is supported, but is not
configured on this storage system.
disabled(4)
The recovery server option is configured as primary, but
has been disabled by software.
daemonDownDisabled(5)
The recovery server option operating system daemon is no
longer running. The last status of RSO was disabled(4).
ok(6)
The recovery server option is configured as primary and
everything is working correctly.
daemonDownActive(7)
The recovery server option operating system daemon is no
longer running. The last status of RSO was ok(6).
noSecondary(8)
The recovery server option is configured as primary, but
communication with the standby server has not been established.
daemonDownNoSecondary(9)
The recovery server option operating system daemon is no
longer running. The last status of RSO was noSecondary(8).
linkDown(10)
The recovery server option is configured as primary, but
communication with the standby server has failed.
daemonDownLinkDown(11)
The recovery server option operating system daemon is no
longer running. The last status of RSO was linkDown(10).
secondaryRunningAuto(12)
The recovery server option is configured and the standby
server is running. The secondary server assumed control
after communication with the primary server failed.
secondaryRunningUser(13)
The recovery server option is configured and the standby
server is running. A user forced the secondary server to
assume control.
evTimeoutError(14)
The recovery server option environment variable cannot be
accessed."
::= { cpqSsChassisEntry 22 }
cpqSsChassisRsoCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Recovery Server Option Condition.
This is the condition of the recovery server option. The
following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The recovery server option is operating normally. No user
action is required.
degraded(3)
The recovery server option is degraded.
failed(4)
The recovery server option is failed."
::= { cpqSsChassisEntry 23 }
cpqSsChassisScsiIoModuleType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
io2port(2),
io4portUpgradeFirmware(3),
io4port(4),
io2port320(5),
io4port320(6),
io1port320(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis SCSI I/O Module Type.
The following values are defined:
other(1)
The agent does not recognize SCSI I/O module type. You may
need to upgrade your software.
io2port(2)
A 2-Port Ultra3 SCSI I/O Module is installed.
io4portUpgradeFirmware(3)
A 4-Port Shared Storage Module for Smart Array Cluster Storage
is installed, but the current controller firmware does not
support it. Upgrade your controller firmware.
io4port(4)
A 4-Port Shared Storage Module for Smart Array Cluster Storage
is installed.
io2port320(5)
A 2-Port Ultra320 SCSI I/O Module is installed.
io4port320(6)
A 4-Port Ultra320 SCSI I/O Module is installed.
io1port320(7)
A 1-Port Ultra320 SCSI I/O Module is installed."
::= { cpqSsChassisEntry 24 }
cpqSsChassisPreferredPathMode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notActiveActive(2),
automatic(3),
manual(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Preferred Path Mode.
This is the storage system active/active preferred path mode.
The following values are valid:
other (1)
Indicates that the agent does not recognize the preferred path
mode of the storage system. You may need to upgrade the agent.
notActiveActive (2)
The storage system is not configured as active/active.
automatic (3)
The storage system automatically selects the preferred path
for each logical drive based on host I/O patterns.
manual (4)
The preferred path for each logical drive is manually
configured by the storage system administrator."
::= { cpqSsChassisEntry 25 }
cpqSsChassisProductId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Chassis Product Identifier.
This is the storage system chassis's product identifier. This can
be used for identification purposes. If the product identifier can
not be determined, the agent will return a NULL string."
::= { cpqSsChassisEntry 26 }
-- ****************************************************************************
-- Storage System I/O Slot Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsIoSlotTable (1.3.6.1.4.1.232.8.2.2.2)
--
-- ****************************************************************************
cpqSsIoSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsIoSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System I/O Slot Table."
::= { cpqSsBoxExtended 2 }
cpqSsIoSlotEntry OBJECT-TYPE
SYNTAX CpqSsIoSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System I/O Slot Entry."
INDEX { cpqSsIoSlotChassisIndex, cpqSsIoSlotIndex }
::= { cpqSsIoSlotTable 1 }
CpqSsIoSlotEntry ::= SEQUENCE
{
cpqSsIoSlotChassisIndex INTEGER,
cpqSsIoSlotIndex INTEGER,
cpqSsIoSlotControllerType INTEGER
}
cpqSsIoSlotChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System I/O Slot Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsIoSlotEntry 1 }
cpqSsIoSlotIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System I/O Slot Index.
This index uniquely identifies a storage system I/O Slot."
::= { cpqSsIoSlotEntry 2 }
cpqSsIoSlotControllerType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notInstalled(2),
unknownBoard(3),
fibreArray(4),
scsiArray(5),
noSlot(6),
iScsiArray(7),
sasArray(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System I/O Slot Controller Type.
The following values are defined:
other(1)
The agent is unable to determine if anything is installed in
this storage system I/O slot.
notInstalled(2)
Nothing is installed in this storage system I/O slot.
unknownBoardInstalled(3)
An unknown controller is installed in this storage system
I/O slot.
fibreArray(4)
A Fibre Channel Array controller is installed in this storage
system I/O slot.
scsiArray(5)
A SCSI Array controller is installed in this storage system
I/O slot.
noSlot(6)
The slot does not exist on this chassis.
iScsiArray(7)
An iSCSI Array controller is installed in this storage system
I/O slot.
sasArray(8)
A SAS Array controller is installed in this storage system
I/O slot."
::= { cpqSsIoSlotEntry 3 }
-- ****************************************************************************
-- Storage System Power Supply Table
-- =================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsPowerSupplyTable (1.3.6.1.4.1.232.8.2.2.3)
--
-- ****************************************************************************
cpqSsPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Table."
::= { cpqSsBoxExtended 3 }
cpqSsPowerSupplyEntry OBJECT-TYPE
SYNTAX CpqSsPowerSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Entry."
INDEX { cpqSsPowerSupplyChassisIndex, cpqSsPowerSupplyIndex }
::= { cpqSsPowerSupplyTable 1 }
CpqSsPowerSupplyEntry ::= SEQUENCE
{
cpqSsPowerSupplyChassisIndex INTEGER,
cpqSsPowerSupplyIndex INTEGER,
cpqSsPowerSupplyBay INTEGER,
cpqSsPowerSupplyStatus INTEGER,
cpqSsPowerSupplyUpsStatus INTEGER,
cpqSsPowerSupplyCondition INTEGER,
cpqSsPowerSupplySerialNumber DisplayString,
cpqSsPowerSupplyBoardRevision DisplayString,
cpqSsPowerSupplyFirmwareRevision DisplayString
}
cpqSsPowerSupplyChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsPowerSupplyEntry 1 }
cpqSsPowerSupplyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Bay.
This index uniquely identifies a power supply bay."
::= { cpqSsPowerSupplyEntry 2 }
cpqSsPowerSupplyBay OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
powerBay1(2),
powerBay2(3),
composite(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Bay.
The following values are defined:
other(1)
The agent does not recognize the bay. You may need to upgrade
your software.
powerBay1(2)
The power supply is installed in the first power supply bay.
powerBay2(3)
The power supply is installed in the second power supply bay.
composite(4)
The power supply information is a composite of all power
supplies in the storage system."
::= { cpqSsPowerSupplyEntry 3 }
cpqSsPowerSupplyStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notInstalled(2),
ok(3),
failed(4),
degraded(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Status.
The following values are defined:
other(1)
The agent is unable to determine if this storage system power
supply bay is occupied.
notInstalled(2)
Nothing is installed in this power supply bay.
ok(3)
A power supply is installed and operating normally.
failed(4)
A power supply is installed and is no longer operating.
Replace the power supply.
degraded(5)
For composite power supplies, this indicates that at least one
power supply has failed or lost power."
::= { cpqSsPowerSupplyEntry 4 }
cpqSsPowerSupplyUpsStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noUps(2),
ok(3),
powerFailed(4),
batteryLow(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Uninterruptible Power Supply (UPS)
Status.
The following values are defined:
other(1)
The agent is unable to determine if this power supply is
attached to an Uninterruptible Power Supply (UPS).
noUps(2)
No UPS is attached to the power supply.
ok(3)
A UPS is attached to the power supply and is operating
normally.
powerFailed(4)
A UPS is attached to the power supply and the AC power has
failed.
batteryLow(5)
A UPS is attached to the power supply, the AC power has
failed and the UPS battery is low."
::= { cpqSsPowerSupplyEntry 5 }
cpqSsPowerSupplyCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Condition.
This is the condition of the storage system chassis and all of
its components. The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The power supply is operating normally. No user action is
required.
degraded(3)
The power supply is degraded. You need to check the power
supply or its attached UPS for problems.
failed(4)
The power supply has failed."
::= { cpqSsPowerSupplyEntry 6 }
cpqSsPowerSupplySerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Serial Number.
This is the power supply's serial number. This can be used
for identification purposes. If the serial number is not supported,
the agent will return a NULL string."
::= { cpqSsPowerSupplyEntry 7 }
cpqSsPowerSupplyBoardRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Board Revision.
This is the power supply board revision. If the board revision is
not supported, the agent will return a NULL string."
::= { cpqSsPowerSupplyEntry 8 }
cpqSsPowerSupplyFirmwareRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Power Supply Firmware Revision.
This is the power supply firmware revision. If the firmware revision
is not supported, the agent will return a NULL string."
::= { cpqSsPowerSupplyEntry 9 }
-- ****************************************************************************
-- Storage System Fan Module Table
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsFanModuleTable (1.3.6.1.4.1.232.8.2.2.4)
--
-- ****************************************************************************
cpqSsFanModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsFanModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Table."
::= { cpqSsBoxExtended 4 }
cpqSsFanModuleEntry OBJECT-TYPE
SYNTAX CpqSsFanModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Entry."
INDEX { cpqSsFanModuleChassisIndex, cpqSsFanModuleIndex }
::= { cpqSsFanModuleTable 1 }
CpqSsFanModuleEntry ::= SEQUENCE
{
cpqSsFanModuleChassisIndex INTEGER,
cpqSsFanModuleIndex INTEGER,
cpqSsFanModuleStatus INTEGER,
cpqSsFanModuleCondition INTEGER,
cpqSsFanModuleLocation INTEGER,
cpqSsFanModuleSerialNumber DisplayString,
cpqSsFanModuleBoardRevision DisplayString
}
cpqSsFanModuleChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsFanModuleEntry 1 }
cpqSsFanModuleIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Index.
This index uniquely identifies a storage system fan module."
::= { cpqSsFanModuleEntry 2 }
cpqSsFanModuleStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notInstalled(2),
ok(3),
degraded(4),
failed(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Status.
The following values are defined:
other(1)
The agent is unable to determine if this storage system fan
module is installed.
notInstalled(3)
The fan module is not installed.
ok(2)
The fan module is installed and operating normally.
degraded(4)
The fan module degraded.
failed(5)
The fan module is failed. Replace the fan module."
::= { cpqSsFanModuleEntry 3 }
cpqSsFanModuleCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Condition.
This is the condition of the storage system fan module.
The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The fan module is operating normally. No user action is
required.
degraded(3)
The fan module is degraded. You need to check the fan module
for problems.
failed(4)
The fan module has failed. Replace the fan module."
::= { cpqSsFanModuleEntry 4 }
cpqSsFanModuleLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
fanBay(2),
composite(3),
fanBay2(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Location.
The following values are defined:
other(1)
The agent is unable to determine the location of this storage
system fan module.
fanBay(2)
This fan module is installed in the first fan bay.
composite(3)
The fan information is a composite of all fans in the storage
system.
fanBay2(4)
This fan module is installed in the second fan bay."
::= { cpqSsFanModuleEntry 5 }
cpqSsFanModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Serial Number.
This is the fan module's serial number. This can be used
for identification purposes."
::= { cpqSsFanModuleEntry 6 }
cpqSsFanModuleBoardRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Board Revision.
This is the fan module board revision."
::= { cpqSsFanModuleEntry 7 }
-- ****************************************************************************
-- Storage System Temperature Sensor Table
-- =======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsTempSensorTable (1.3.6.1.4.1.232.8.2.2.5)
--
-- ****************************************************************************
cpqSsTempSensorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsTempSensorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Table."
::= { cpqSsBoxExtended 5 }
cpqSsTempSensorEntry OBJECT-TYPE
SYNTAX CpqSsTempSensorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Entry."
INDEX { cpqSsTempSensorChassisIndex, cpqSsTempSensorIndex }
::= { cpqSsTempSensorTable 1 }
CpqSsTempSensorEntry ::= SEQUENCE
{
cpqSsTempSensorChassisIndex INTEGER,
cpqSsTempSensorIndex INTEGER,
cpqSsTempSensorStatus INTEGER,
cpqSsTempSensorCondition INTEGER,
cpqSsTempSensorLocation INTEGER,
cpqSsTempSensorCurrentValue INTEGER,
cpqSsTempSensorLimitValue INTEGER,
cpqSsTempSensorHysteresisValue INTEGER
}
cpqSsTempSensorChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsTempSensorEntry 1 }
cpqSsTempSensorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Index.
This index uniquely identifies a temperature sensor."
::= { cpqSsTempSensorEntry 2 }
cpqSsTempSensorStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Status.
The following values are defined:
other(1)
The agent is unable to determine if the storage system
temperature sensor status.
ok(2)
The temperature is OK.
degraded(3)
The temperature is degraded.
failed(4)
The temperature is failed."
::= { cpqSsTempSensorEntry 3 }
cpqSsTempSensorCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Condition.
This is the condition of the storage system temperature sensor.
The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The temperature is within normal operating range. No user
action is required.
degraded(3)
The temperature is outside of normal operating range.
failed(4)
The temperature could permanently damage the system.
The storage system will automatically shutdown if this
condition is detected."
::= { cpqSsTempSensorEntry 4 }
cpqSsTempSensorLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
fanBay(2),
backplane(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fan Module Location.
The following values are defined:
other(1)
The agent is unable to determine the location of this storage
system temperature sensor.
fanBay(2)
This temperature sensor is located on the fan module in the
fan bay.
backplane(3)
This temperature is located on the SCSI drive backplane."
::= { cpqSsTempSensorEntry 5 }
cpqSsTempSensorCurrentValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Current Value.
The current value of the temperature sensor in degrees Celsius."
::= { cpqSsTempSensorEntry 6 }
cpqSsTempSensorLimitValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Limit Value.
The limit value of the temperature sensor in degrees Celsius."
::= { cpqSsTempSensorEntry 7 }
cpqSsTempSensorHysteresisValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Temperature Sensor Hysteresis Value.
The hysteresis value of the temperature sensor in degrees Celsius."
::= { cpqSsTempSensorEntry 8 }
-- ****************************************************************************
-- Storage System SCSI Backplane Table
-- ===================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsBackplaneTable (1.3.6.1.4.1.232.8.2.2.6)
--
-- ****************************************************************************
cpqSsBackplaneTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsBackplaneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System SCSI Backplane Table."
::= { cpqSsBoxExtended 6 }
cpqSsBackplaneEntry OBJECT-TYPE
SYNTAX CpqSsBackplaneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System SCSI Backplane Entry."
INDEX { cpqSsBackplaneChassisIndex, cpqSsBackplaneIndex }
::= { cpqSsBackplaneTable 1 }
CpqSsBackplaneEntry ::= SEQUENCE
{
cpqSsBackplaneChassisIndex INTEGER,
cpqSsBackplaneIndex INTEGER,
cpqSsBackplaneFWRev DisplayString,
cpqSsBackplaneDriveBays INTEGER,
cpqSsBackplaneDuplexOption INTEGER,
cpqSsBackplaneCondition INTEGER,
cpqSsBackplaneVersion INTEGER,
cpqSsBackplaneVendor DisplayString,
cpqSsBackplaneModel DisplayString,
cpqSsBackplaneFanStatus INTEGER,
cpqSsBackplaneTempStatus INTEGER,
cpqSsBackplaneFtpsStatus INTEGER,
cpqSsBackplaneSerialNumber DisplayString,
cpqSsBackplanePlacement INTEGER,
cpqSsBackplaneBoardRevision INTEGER,
cpqSsBackplaneSpeed INTEGER,
cpqSsBackplaneConnectionType INTEGER,
cpqSsBackplaneConnector DisplayString,
cpqSsBackplaneOnConnector INTEGER,
cpqSsBackplaneLocationString DisplayString
}
cpqSsBackplaneChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Chassis Index.
The chassis index uniquely identifies a storage system chassis."
::= { cpqSsBackplaneEntry 1 }
cpqSsBackplaneIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Index.
This index uniquely identifies a storage system backplane."
::= { cpqSsBackplaneEntry 2 }
cpqSsBackplaneFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Firmware Revision.
This is the revision level of storage system backplane."
::= { cpqSsBackplaneEntry 3 }
cpqSsBackplaneDriveBays OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Drive Bays.
This is the number of bays on this storage system backplane."
::= { cpqSsBackplaneEntry 4 }
cpqSsBackplaneDuplexOption OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notDuplexed(2),
duplexTop(3),
duplexBottom(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Duplex Option.
The following values are defined:
other (1)
The agent is unable to determine if this storage
system is duplexed.
notDuplexed(2)
This storage system is not duplexed.
duplexTop(3)
This is the top portion of a duplexed storage system.
duplexBottom(4)
This is the bottom portion of a duplexed storage system."
::= { cpqSsBackplaneEntry 5 }
cpqSsBackplaneCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Condition.
This is the overall condition of the backplane.
The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The storage system is operating normally. No user
action is required.
degraded(3)
The storage system is degraded. You need to check the
temperature status or power supply status of this
storage system.
failed(4)
The storage system has failed."
::= { cpqSsBackplaneEntry 6 }
cpqSsBackplaneVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Version.
This is the version of the drive box back plane."
::= { cpqSsBackplaneEntry 7 }
cpqSsBackplaneVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Vendor
This is the storage box's vendor name.
This can be used for identification purposes."
::= { cpqSsBackplaneEntry 8 }
cpqSsBackplaneModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Model.
This is a description of the storage system's model.
This can be used for identification purposes."
::= { cpqSsBackplaneEntry 9 }
cpqSsBackplaneFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notInstalled(2),
ok(3),
degraded(4),
failed(5),
notSupported(6),
degraded-Fan1Failed(7),
degraded-Fan2Failed(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Fan Status.
This is the current status of the fans in the storage system.
This value will be one of the following:
other(1)
The agent is unable to determine if this storage system has
fan monitoring.
notInstalled(2)
This unit does not support fan monitoring.
ok(3)
All fans are working normally.
degraded(4)
At least one storage system fan has failed, but there is still
sufficient cooling capacity to allow the system to continue.
The fan should be replaced.
failed(5)
One or more storage system fans have failed. The fan(s) should
be replaced immediately to avoid hardware damage.
notSupported(6)
The storage system does not support reporting fan status
through this backplane. The fan status is reported through the
first backplane on this storage system.
degraded-Fan1Failed(7)
Fan 1 has failed, but there is still sufficient cooling
capacity to allow the system to continue. The fan should be
replaced.
degraded-Fan2Failed(8)
Fan 2 has failed, but there is still sufficient cooling
capacity to allow the system to continue. The fan should be
replaced."
::= { cpqSsBackplaneEntry 10 }
cpqSsBackplaneTempStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noTemp(2),
ok(3),
degraded(4),
failed(5),
notSupported(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Fan Status.
This value will be one of the following:
other(1)
The agent is unable to determine if this storage system has
temperature monitoring.
noTemp(2)
This unit does not support temperature monitoring.
ok(3)
The temperature is within normal operating range.
degraded(4)
The temperature is outside of normal operating range.
failed(5)
The temperature could permanently damage the system.
notSupported(6)
The storage system does not support reporting temperature
status through this backplane. The temperature status is
reported through the first backplane on this storage system."
::= { cpqSsBackplaneEntry 11 }
cpqSsBackplaneFtpsStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noFltTolPower(2),
ok(3),
degraded(4),
failed(5),
notSupported(6),
noFltTolPower-Bay1Missing(7),
noFltTolPower-Bay2Missing(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Fault Tolerant Power Supply Status.
This value specifies the overall status of the redundant power
supply in a drive box. This value will be one of the following:
other(1)
The agent is unable to determine if this storage system has
redundant power supplies.
noFltTolPower(2)
This unit does not have a redundant supply.
ok(3)
There are no detected power supply failures.
degraded(4)
One of the power supply units has failed.
failed(5)
All of the power supplies have failed. A status of failed can
not currently be determined.
notSupported(6)
The storage system does not support reporting fault tolerant
power supply status through this backplane. The fault tolerant
power supply status is reported through the first backplane on
this storage system.
noFltTolPower-Bay1Missing(7),
This unit does not have a redundant supply. The power supply
in bay 1 is missing.
noFltTolPower-Bay2Missing(8)
This unit does not have a redundant supply. The power supply
in bay 2 is missing."
::= { cpqSsBackplaneEntry 12 }
cpqSsBackplaneSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Serial Number.
This is the storage system backplane serial number which is normally
displayed on the front bezel. This can be used for identification
purposes."
::= { cpqSsBackplaneEntry 13 }
cpqSsBackplanePlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Placement.
The following values are defined:
other(1)
The agent is unable to determine if this storage system is
located internal or external to the system chassis.
internal(2)
The storage system is located in the system chassis.
external(3)
The storage system is located outside the system chassis
in an expansion box."
::= { cpqSsBackplaneEntry 14 }
cpqSsBackplaneBoardRevision OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Board Revision.
This is the board revision of this storage system backplane."
::= { cpqSsBackplaneEntry 15 }
cpqSsBackplaneSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ultra3(2),
ultra320(3),
sata(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Backplane Speed.
The following values are defined:
other(1)
The agent is unable to determine the backplane speed for this
storage system.
ultra3(2)
This storage system is capable of Ultra3 speeds.
ultra320(3)
This storage system is capable of Ultra320 speeds.
sata(4)
This storage system is capable of SATA speeds."
::= { cpqSsBackplaneEntry 16 }
cpqSsBackplaneConnectionType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
scsiAttached(2),
sasAttached(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Backlane Box Connection Type.
The following values are defined:
other(1)
The agent is unable to determine the type of connection to
this backplane.
scsiAttached(2)
This backplane is attached to the host via SCSI.
sasAttached(3)
This backplane is attached to the host via SAS."
::= { cpqSsBackplaneEntry 17 }
cpqSsBackplaneConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Backplane Connector.
This is the connector to which the backplane is attached.
If the backplane connector cannot be determined, the agent will
return a NULL string."
::= { cpqSsBackplaneEntry 18 }
cpqSsBackplaneOnConnector OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Backplane on Connector.
The backplane on connector indicates to which backplane instance
this table entry belongs. The instances start at one and
increment for each backplane attached to a connector."
::= { cpqSsBackplaneEntry 19 }
cpqSsBackplaneLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Backplane Location String.
This string describes the location of the backplane in relation
to the controller to which it is attached. If the location
string cannot be determined, the agent will return a NULL string."
::= { cpqSsBackplaneEntry 20 }
-- ****************************************************************************
-- Storage System Fibre Attachment Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsFibreAttachmentTable (1.3.6.1.4.1.232.8.2.2.7)
--
-- The Storage System Fibre Attachment Group contains associations between
-- Fibre channel host controllers and the Fibre devices that are attached to
-- them. Since there can be multiple paths to some Fibre devices, there may
-- be multiple entries for a given device.
--
-- ****************************************************************************
cpqSsFibreAttachmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsFibreAttachmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Table."
::= { cpqSsBoxExtended 7 }
cpqSsFibreAttachmentEntry OBJECT-TYPE
SYNTAX CpqSsFibreAttachmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Entry."
INDEX { cpqSsFibreAttachmentIndex }
::= { cpqSsFibreAttachmentTable 1 }
CpqSsFibreAttachmentEntry ::= SEQUENCE
{
cpqSsFibreAttachmentIndex INTEGER,
cpqSsFibreAttachmentHostControllerIndex INTEGER,
cpqSsFibreAttachmentHostControllerPort INTEGER,
cpqSsFibreAttachmentDeviceType INTEGER,
cpqSsFibreAttachmentDeviceIndex INTEGER,
cpqSsFibreAttachmentDevicePort INTEGER
}
cpqSsFibreAttachmentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Index.
The index uniquely identifies a Fibre Attachment association entry."
::= { cpqSsFibreAttachmentEntry 1 }
cpqSsFibreAttachmentHostControllerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Host Controller Index.
The host controller index indicates which host controller is
associated with this entry. This is equal to cpqFcaHostCntlrIndex,
from the Fibre Channel Host Controller Table."
::= { cpqSsFibreAttachmentEntry 2 }
cpqSsFibreAttachmentHostControllerPort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Host Controller Port.
This is the Fibre port number of the host controller. For each host
controller, the port number starts at 1 and increments for each port.
This is currently set to 1."
::= { cpqSsFibreAttachmentEntry 3 }
cpqSsFibreAttachmentDeviceType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
storageBox(2),
tapeController(3),
fibreChannelSwitch(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Device Type.
This is the type of device associated with this entry.
The following values are defined:
other(1)
The agent is unable to determine if the type of this device.
storageBox(2)
The device is a Fibre attached storage system.
tapeController(3)
The device is a Fibre attached tape controller.
fibreChannelSwitch(4)
The device is a Fibre channel switch."
::= { cpqSsFibreAttachmentEntry 4 }
cpqSsFibreAttachmentDeviceIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Device Index.
The is the index for the Fibre attached device. For a Fibre
attached storage system, this is equal to cpqSsChassisIndex from the
Storage System Chassis Table. For a Fibre attached tape controller,
this is equal to cpqFcTapeCntlrIndex from the Fibre Channel Tape
Controller Table. For a Fibre channel switch, this is equal to
cpqFcSwitchIndex from the Fibre Channel Switch Table."
::= { cpqSsFibreAttachmentEntry 5 }
cpqSsFibreAttachmentDevicePort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System Fibre Attachment Device Port.
This is the Fibre port on a device. For a Fibre attached storage
system, this is equal to cpqFcaCntlrBoxIoSlot from the Fibre Channel
Array Controller Table. For a Fibre attached tape controller,
this is currently set to 1. For a Fibre channel switch, this is
currently set to 1."
::= { cpqSsFibreAttachmentEntry 6 }
-- ****************************************************************************
-- Storage System Scsi Attachment Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsBoxExtended Group (1.3.6.1.4.1.232.8.2.2)
-- cpqSsScsiAttachmentTable (1.3.6.1.4.1.232.8.2.2.8)
--
-- The Storage System Scsi Attachment Group contains associations between
-- internal array controllers and the external arrays that are attached to
-- them. Since there can be multiple paths to some external arrays, there
-- may be multiple entries for a given device.
--
-- ****************************************************************************
cpqSsScsiAttachmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsScsiAttachmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Table."
::= { cpqSsBoxExtended 8 }
cpqSsScsiAttachmentEntry OBJECT-TYPE
SYNTAX CpqSsScsiAttachmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Entry."
INDEX { cpqSsScsiAttachmentIndex }
::= { cpqSsScsiAttachmentTable 1 }
CpqSsScsiAttachmentEntry ::= SEQUENCE
{
cpqSsScsiAttachmentIndex INTEGER,
cpqSsScsiAttachmentControllerIndex INTEGER,
cpqSsScsiAttachmentControllerPort INTEGER,
cpqSsScsiAttachmentControllerTarget INTEGER,
cpqSsScsiAttachmentControllerLun INTEGER,
cpqSsScsiAttachmentChassisIndex INTEGER,
cpqSsScsiAttachmentChassisIoSlot INTEGER,
cpqSsScsiAttachmentPathStatus INTEGER,
cpqSsScsiAttachmentPathCondition INTEGER
}
cpqSsScsiAttachmentIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Index.
The index uniquely identifies a SCSI Attachment association entry."
::= { cpqSsScsiAttachmentEntry 1 }
cpqSsScsiAttachmentControllerIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Controller Index.
The controller index indicates which internal array controller is
associated with this entry. This is equal to cpqDaCntlrIndex,
from the Array Controller Table."
::= { cpqSsScsiAttachmentEntry 2 }
cpqSsScsiAttachmentControllerPort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Controller Port.
The controller port indicates which SCSI port of an internal
controller is associated with this entry."
::= { cpqSsScsiAttachmentEntry 3 }
cpqSsScsiAttachmentControllerTarget OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Controller Target.
The controller target indicates which SCSI target is associated with
this entry."
::= { cpqSsScsiAttachmentEntry 4 }
cpqSsScsiAttachmentControllerLun OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Controller Lun.
The controller Lun indicates which SCSI Lun is associated with this
entry."
::= { cpqSsScsiAttachmentEntry 5 }
cpqSsScsiAttachmentChassisIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Chassis Index.
The is the index for the SCSI attached storage system. This is equal
to cpqSsChassisIndex from the Storage System Chassis Table."
::= { cpqSsScsiAttachmentEntry 6 }
cpqSsScsiAttachmentChassisIoSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Chassis I/O Slot.
This is the I/O slot in the SCSI attached storage system. This is
equal to cpqFcaCntlrBoxIoSlot from the Fibre Channel Array Controller
Table."
::= { cpqSsScsiAttachmentEntry 7 }
cpqSsScsiAttachmentPathStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
offline(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Path Status.
This is the status of this path to the chassis. The following
values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The path is operating normally.
offline(3)
The path is offline."
::= { cpqSsScsiAttachmentEntry 8 }
cpqSsScsiAttachmentPathCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Storage System SCSI Attachment Path Condition.
This is the condition of this path to the chassis."
::= { cpqSsScsiAttachmentEntry 9 }
-- ****************************************************************************
-- Storage System Drive Box Access Path Group
-- ==========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsDrvBox Group (1.3.6.1.4.1.232.8.2)
-- cpqSsDrvBoxPathTable (1.3.6.1.4.1.232.8.2.3)
--
-- ****************************************************************************
cpqSsDrvBoxPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsDrvBoxPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Table."
::= { cpqSsDrvBox 3 }
cpqSsDrvBoxPathEntry OBJECT-TYPE
SYNTAX CpqSsDrvBoxPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Entry."
INDEX { cpqSsDrvBoxPathCntlrIndex, cpqSsDrvBoxPathBoxIndex,
cpqSsDrvBoxPathIndex }
::= { cpqSsDrvBoxPathTable 1 }
CpqSsDrvBoxPathEntry ::= SEQUENCE
{
cpqSsDrvBoxPathCntlrIndex INTEGER,
cpqSsDrvBoxPathBoxIndex INTEGER,
cpqSsDrvBoxPathIndex INTEGER,
cpqSsDrvBoxPathStatus INTEGER,
cpqSsDrvBoxPathCurrentRole INTEGER,
cpqSsDrvBoxPathHostConnector DisplayString,
cpqSsDrvBoxPathBoxOnConnector INTEGER,
cpqSsDrvBoxPathLocationString DisplayString
}
cpqSsDrvBoxPathCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Controller Index.
The controller index indicates to which adapter card instance
this table entry belongs."
::= { cpqSsDrvBoxPathEntry 1 }
cpqSsDrvBoxPathBoxIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Box Index.
The box index indicates to which box instance on an adapter card
this table entry belongs. The value of this index is the same as
cpqSsDrvBoxBusIndex used under the drive box table."
::= { cpqSsDrvBoxPathEntry 2 }
cpqSsDrvBoxPathIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Index.
This path index keeps track of multiple instances of access
paths from a controller to a storage box. This number, along with
the cpqSsDrvBoxPathCntlrIndex and cpqSsDrvBoxPathDrvIndex uniquely
identify a specific storage box access path"
::= { cpqSsDrvBoxPathEntry 3 }
cpqSsDrvBoxPathStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
linkDown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Status.
This shows the status of the drive box access path. The
following values are valid:
Other (1)
Indicates that the instrument agent can not determine the
status of this access path.
OK (2)
Indicates the access path is functioning properly.
Link Down (3)
Indicates that the controller can no longer access the drive box
through this path."
::= { cpqSsDrvBoxPathEntry 4 }
cpqSsDrvBoxPathCurrentRole OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
active(2),
alternate(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Current Role.
This shows the current role of drive box acess path. The
following values are valid:
Other (1)
Indicates that the instrument agent does not recognize the
role of this access path.
Active (2)
Indicates that this path is currently the default active
I/O path to access the drive box from the controller.
Alternate (3)
Indicates that this path is currently the alternate I/O
path to access the physical drive from the controller."
::= { cpqSsDrvBoxPathEntry 5 }
cpqSsDrvBoxPathHostConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Host Connector.
This is the host connector to which the access path is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string."
::= { cpqSsDrvBoxPathEntry 6 }
cpqSsDrvBoxPathBoxOnConnector OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Box on Connector.
The box on connector indicates to which box instance this
access path belongs."
::= { cpqSsDrvBoxPathEntry 7 }
cpqSsDrvBoxPathLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Box Access Path Location String.
This string describes drive box access path in relation to the
controller to which it is attached. If the location string
cannot be determined, the agent will return a NULL string."
::= { cpqSsDrvBoxPathEntry 8 }
-- ****************************************************************************
-- Storage System Trap Group
-- =========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsTrap Group (1.3.6.1.4.1.232.8.3) (deprecated)
--
--
-- The trap group maintains information about the number of traps issued
-- from the storageSys enterprise. The trap group also maintains a table of
-- the last several traps issued. This table is intended to give a
-- management application some recent status information immediately upon
-- accessing the agent.
--
-- Implementation of the Trap group is optional for agents.
-- The trap group has been deprecated for Insight v2.00 Agents.
--
-- ****************************************************************************
cpqSsTrapPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of trap packets issued by the enterprise since
the instrument agent was loaded."
::= { cpqSsTrap 1 }
cpqSsTrapLogMaxSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of entries that will currently be kept in
the trap log. If the maximum size has been reached and a new
trap occurs the oldest trap will be removed."
::= { cpqSsTrap 2 }
-- ****************************************************************************
-- Storage System Trap Log Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsTrap Group (1.3.6.1.4.1.232.8.3) (deprecated)
-- cpqSsTrapLogTable (1.3.6.1.4.1.232.8.3.3) (deprecated)
--
-- ****************************************************************************
cpqSsTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An ordered list of trap log entries (conceptually a queue).
The trap log entries will be kept in the order in which they
were generated with the most recent trap at index 1 and the
oldest trap entry at index trapLogMaxSize. If the maximum
number size has been reached and a new trap occurs the oldest
trap will be removed when the new trap is added so the
trapMaxLogSize is not exceeded."
::= { cpqSsTrap 3 }
cpqSsTrapLogEntry OBJECT-TYPE
SYNTAX CpqSsTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a trap event."
INDEX { cpqSsTrapLogIndex }
::= { cpqSsTrapLogTable 1 }
CpqSsTrapLogEntry ::= SEQUENCE
{
cpqSsTrapLogIndex INTEGER,
cpqSsTrapType INTEGER,
cpqSsTrapTime OCTET STRING
}
cpqSsTrapLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of this object uniquely identifies this trapLogEntry
at this time. The most recent trap will have an index of 1 and
the oldest trap will have an index of trapLogMaxSize. Because of
the queue-like nature of the trapLog this particular trap event's
index will change as new traps are issued."
::= { cpqSsTrapLogEntry 1 }
cpqSsTrapType OBJECT-TYPE
SYNTAX INTEGER
{
cpqSsFanStatusChange(1),
cpqSs2FanStatusChange(8001),
cpqSsTempFailed(8002),
cpqSsTempDegraded(8003),
cpqSsTempOk(8004),
cpqSsSidePanelInPlace(8005),
cpqSsSidePanelRemoved(8006)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of the trap event that this entry describes. This
number refers to an entry in a list of traps enumerating the
possible traps the agent may issue."
::= { cpqSsTrapLogEntry 2 }
cpqSsTrapTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time of the trap event that this entry describes. The time
is given in year (first octet), month, day of month, hour,
minute, second (last octet) order. Each octet gives the value in
BCD."
::= { cpqSsTrapLogEntry 3 }
-- ****************************************************************************
-- RAID Storage System Group
-- ==============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqSsStorageSys Group (1.3.6.1.4.1.232.8)
-- cpqSsRaidSystem Group (1.3.6.1.4.1.232.8.4)
-- cpqSsRaidSystemTable (1.3.6.1.4.1.232.8.4.1)
--
-- Implementation of the RAID Storage System group is mandatory.
--
-- ****************************************************************************
cpqSsRaidSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqSsRaidSystemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RAID Storage System Table."
::= { cpqSsRaidSystem 1 }
cpqSsRaidSystemEntry OBJECT-TYPE
SYNTAX CpqSsRaidSystemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RAID Storage System Entry."
INDEX { cpqSsRaidSystemIndex }
::= { cpqSsRaidSystemTable 1 }
CpqSsRaidSystemEntry ::= SEQUENCE
{
cpqSsRaidSystemIndex INTEGER,
cpqSsRaidSystemName DisplayString,
cpqSsRaidSystemStatus INTEGER,
cpqSsRaidSystemCondition INTEGER,
cpqSsRaidSystemCntlr1SerialNumber DisplayString,
cpqSsRaidSystemCntlr2SerialNumber DisplayString
}
cpqSsRaidSystemIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Index.
The RAID Storage System index indicates to which storage system instance
this table entry belongs."
::= { cpqSsRaidSystemEntry 1 }
cpqSsRaidSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Name.
This is a description of the RAID Storage System's name.
This can be used for identification purposes."
::= { cpqSsRaidSystemEntry 2 }
cpqSsRaidSystemStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
agentNotRunning(2),
good(3),
warning(4),
communicationLoss(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Status.
This is the current status of the RAID Storage System.
This value will be one of the following:
other(1)
Indicates that the agent does not recognize the state of the
RAID Storage System. You may need to upgrade the agent.
agentNotRunning(2)
Indicates that the Storage Work agent is not running. You need
to restart the Storage Work agent.
good(3)
Indicates that the system is operating properly.
warning(4)
At least one component of the system failed.
communicationLoss(5)
The RAID Storage System has a cable or communication problem.
Please check all cable connects to the host server."
::= { cpqSsRaidSystemEntry 3 }
cpqSsRaidSystemCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Condition.
This is the overall condition of the storage system.
The following values are defined:
other(1)
The agent does not recognize the status. You may need to
upgrade your software.
ok(2)
The storage system is operating normally. No user
action is required.
degraded(3)
The storage system is degraded. At least one component
of the storage system failed.
failed(4)
The storage system has failed."
::= { cpqSsRaidSystemEntry 4 }
cpqSsRaidSystemCntlr1SerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Controller 1 Serial Number.
This is the controller number 1's serial number which is normally
display on the front panel. This can be used for
identification purposes."
::= { cpqSsRaidSystemEntry 5 }
cpqSsRaidSystemCntlr2SerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAID Storage System Controller 2 Serial Number.
This is the controller number 2's serial number which is normally
display on the front panel. This can be used for
identification purposes."
::= { cpqSsRaidSystemEntry 6 }
-- ****************************************************************************
-- Storage System Trap Definitions
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
--
-- The SNMP trap messages must not be bigger than 484 octets (bytes).
--
-- Trap support in an SNMP agent implementation is optional. An SNMP
-- agent implementation may support all, some, or none of the traps.
-- If traps are supported, The user should be provided with the option of
-- disabling traps.
--
-- **************************************************************************
cpqSsFanStatusChange TRAP-TYPE
ENTERPRISE cpqSsStorageSys
VARIABLES { cpqSsBoxFanStatus }
DESCRIPTION
"Storage System fan status change.
The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current
fan status."
--#TYPE "Fan Status Change (1)"
--#SUMMARY "Storage System fan status changed to %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 1
cpqSs2FanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxFanStatus }
DESCRIPTION
"Storage System fan status change.
The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current
fan status."
--#TYPE "Fan Status Change (8001)"
--#SUMMARY "Storage System fan status changed to %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8001
cpqSsTempFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature failure.
The agent has detected that a temperature status has been set
to failed. The storage system will be shutdown."
--#TYPE "Storage System Temperature Failure (8002)"
--#SUMMARY "Storage System will be shutdown."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE NONOPERATIONAL
::= 8002
cpqSsTempDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature degraded.
The agent has detected a temperature status that has been set to
degraded. The storage system's temperature is outside of the
normal operating range."
--#TYPE "Storage System Temp Degraded (8003)"
--#SUMMARY "Temp is outside of normal range."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8003
cpqSsTempOk TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature ok.
The temperature status has been set to OK. The storage
system's temperature has returned to normal operating range.
It may be reactivated by the administrator."
--#TYPE "Storage System Temp OK (8004)"
--#SUMMARY "Storage System temperature ok."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
::= 8004
cpqSsSidePanelInPlace TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxSidePanelStatus }
DESCRIPTION
"Storage System side panel is in place.
The side panel status has been set to in place. The storage
system's side panel has returned to a properly installed state."
--#TYPE "Storage System side panel is in place (8005)"
--#SUMMARY "Side panel is re-installed on unit."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
::= 8005
cpqSsSidePanelRemoved TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqSsBoxSidePanelStatus }
DESCRIPTION
"Storage System side panel is removed.
The side panel status has been set to removed. The storage
system's side panel is not in a properly installed state. This
situation may result in improper cooling of the drives in the
storage system due to air flow changes caused by the missing
side panel."
--#TYPE "Storage System side panel is removed (8006)"
--#SUMMARY "Side panel is removed from unit."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8006
cpqSsPwrSupplyDegraded TRAP-TYPE
ENTERPRISE compaq
DESCRIPTION
"A storage system power supply status has been set to degraded."
--#TYPE "Power Supply Degraded (8007)"
--#SUMMARY "A storage system power supply unit has become degraded"
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8007
cpqSs3FanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxFanStatus }
DESCRIPTION
"Storage System fan status change.
The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current
fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Fan Status Change (8008)"
--#SUMMARY "Storage System fan status changed to %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8008
cpqSs3TempFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature failure.
The agent has detected that a temperature status has been set to
failed. The storage system will be shutdown.
User Action: Shutdown the storage system as soon as possible.
Insure that the storage system environment is being cooled
properly and that no components are overheated."
--#TYPE "Storage System Temperature Failure (8009)"
--#SUMMARY "Storage System will be shutdown."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE NONOPERATIONAL
::= 8009
cpqSs3TempDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature degraded.
The agent has detected a temperature status that has been set to
degraded. The storage system's temperature is outside of the
normal operating range.
User Action: Shutdown the storage system as soon as possible.
Insure that the storage system environment is being cooled
properly and that no components are overheated."
--#TYPE "Storage System Temp Degraded (8010)"
--#SUMMARY "Temp is outside of normal range."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8010
cpqSs3TempOk TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature ok.
The temperature status has been set to OK. The storage
system's temperature has returned to normal operating range.
It may be reactivated by the administrator.
User Action: None."
--#TYPE "Storage System Temp OK (8011)"
--#SUMMARY "Storage System temperature ok."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
::= 8011
cpqSs3SidePanelInPlace TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxSidePanelStatus }
DESCRIPTION
"Storage System side panel is in place.
The side panel status has been set to in place. The storage
system's side panel has returned to a properly installed state.
User Action: None."
--#TYPE "Storage System side panel is in place (8012)"
--#SUMMARY "Side panel is re-installed on unit."
--#ARGUMENTS {}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
--#STATE OPERATIONAL
::= 8012
cpqSs3SidePanelRemoved TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxSidePanelStatus }
DESCRIPTION
"Storage System side panel is removed.
The side panel status has been set to removed. The storage
system's side panel is not in a properly installed state. This
situation may result in improper cooling of the drives in the
storage system due to air flow changes caused by the missing
side panel.
User Action: Replace the storage system side panel."
--#TYPE "Storage System side panel is removed (8013)"
--#SUMMARY "Side panel is removed from unit."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8013
cpqSs3PwrSupplyDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags }
DESCRIPTION
"A storage system power supply status has been set to degraded."
--#TYPE "Power Supply Degraded (8014)"
--#SUMMARY "A storage system power supply unit has become degraded"
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8014
cpqSs4PwrSupplyDegraded TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxFltTolPwrSupplyStatus }
DESCRIPTION
"A storage system power supply status has been set to degraded.
User Action: Take action to restore power or replace any failed
storage system power supply."
--#TYPE "Power Supply Degraded (8015)"
--#SUMMARY "A storage system power supply unit has become degraded"
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#STATE DEGRADED
::= 8015
cpqSsExFanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsFanModuleLocation,
cpqSsFanModuleStatus }
DESCRIPTION
"Storage system fan status change.
The agent has detected a change in the Fan Module Status of a
storage system. The variable cpqSsFanModuleStatus indicates the
current fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Fan Status Change (8016)"
--#SUMMARY "Storage system fan status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8016
cpqSsExPowerSupplyStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsPowerSupplyBay,
cpqSsPowerSupplyStatus }
DESCRIPTION
"Storage system power supply status change.
The agent has detected a change in the power supply status of a
storage system. The variable cpqSsPowerSupplyStatus indicates
the current status.
User Action: If the power supply status is failed, take action to
restore power or replace the failed power supply."
--#TYPE "Power Supply Status Change (8017)"
--#SUMMARY "Storage system power supply status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8017
cpqSsExPowerSupplyUpsStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsPowerSupplyBay,
cpqSsPowerSupplyUpsStatus }
DESCRIPTION
"Storage system power supply UPS status change.
The agent has detected a change status of a UPS attached to a
storage system power supply. The variable
cpqSsPowerSupplyUpsStatus indicates the current status.
User Action: If the UPS status is powerFailed(4) or batteryLow(5),
take action to restore power to the UPS."
--#TYPE "Power Supply UPS Status Change (8018)"
--#SUMMARY "Storage system power supply UPS status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8018
cpqSsExTempSensorStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsTempSensorLocation,
cpqSsTempSensorStatus, cpqSsTempSensorCurrentValue }
DESCRIPTION
"Storage system temperature sensor status change.
The agent has detected a change in the status of a storage
system temperature sensor. The variable cpqSsTempSensorStatus
indicates the current status.
User Action: If the temperature status is degraded or failed,
shutdown the storage system as soon as possible. Insure that
the storage system environment is being cooled properly and that
no components are overheated."
--#TYPE "Temperature Sensor Status Change (8019)"
--#SUMMARY "Storage system temperature sensor status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8019
cpqSsEx2FanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsFanModuleLocation,
cpqSsFanModuleStatus, cpqSsFanModuleSerialNumber,
cpqSsFanModuleBoardRevision }
DESCRIPTION
"Storage system fan status change.
The agent has detected a change in the fan module status of a
storage system. The variable cpqSsFanModuleStatus indicates the
current fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Fan Status Change (8020)"
--#SUMMARY "Storage system fan status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8020
cpqSsEx2PowerSupplyStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsPowerSupplyBay,
cpqSsPowerSupplyStatus, cpqSsPowerSupplySerialNumber,
cpqSsPowerSupplyBoardRevision,
cpqSsPowerSupplyFirmwareRevision }
DESCRIPTION
"Storage system power supply status change.
The agent has detected a change in the power supply status of a
storage system. The variable cpqSsPowerSupplyStatus indicates
the current status.
User Action: If the power supply status is failed, take action to
restore power or replace the failed power supply."
--#TYPE "Power Supply Status Change (8021)"
--#SUMMARY "Storage system power supply status changed to %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8021
cpqSsExBackplaneFanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsBackplaneIndex,
cpqSsBackplaneVendor, cpqSsBackplaneModel,
cpqSsBackplaneSerialNumber, cpqSsBackplaneFanStatus }
DESCRIPTION
"Storage system fan status change.
The agent has detected a change in the fan status of a storage
system. The variable cpqSsBackplaneFanStatus indicates the
current fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Storage System Fan Status Change (8022)"
--#SUMMARY "Storage system fan status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8022
cpqSsExBackplaneTempStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsBackplaneIndex,
cpqSsBackplaneVendor, cpqSsBackplaneModel,
cpqSsBackplaneSerialNumber, cpqSsBackplaneTempStatus }
DESCRIPTION
"Storage system temperature status change.
The agent has detected a change in the status of the temperature
in a storage system. The variable cpqSsBackplaneTempStatus
indicates the current status.
User Action: If the temperature status is degraded or failed,
shutdown the storage system as soon as possible. Insure that
the storage system environment is being cooled properly and that
no components are overheated."
--#TYPE "Storage System Temperature Status Change (8023)"
--#SUMMARY "Storage system temperature status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8023
cpqSsExBackplanePowerSupplyStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsBackplaneIndex,
cpqSsBackplaneVendor, cpqSsBackplaneModel,
cpqSsBackplaneSerialNumber, cpqSsBackplaneFtpsStatus }
DESCRIPTION
"Storage system power supply status change.
The agent has detected a change in the power supply status of a
storage system. The variable cpqSsBackplaneFtpsStatus indicates
the current status.
User Action: If the power supply status is degraded, take action to
restore power or replace the failed power supply."
--#TYPE "Power Supply Status Change (8024)"
--#SUMMARY "Storage system power supply status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8024
cpqSsExRecoveryServerStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsChassisName,
cpqSsChassisTime, cpqSsChassisRsoStatus,
cpqSsChassisIndex }
DESCRIPTION
"Storage system recovery server option status change.
The agent has detected a change in the recovery server option
status of a storage system. The variable cpqSsChassisRsoStatus
indicates the current status.
User Action: If the RSO status is noSecondary(6) or linkDown(7),
insure the secondary server is operational and all cables are
connected properly. If the RSO status is secondaryRunningAuto(8)
or secondaryRunningUser(9), examine the the primary server for
failed components."
--#TYPE "Recovery Server Option Status Change (8025)"
--#SUMMARY "Storage system recovery server option status changed to %d."
--#ARGUMENTS {4}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8025
cpqSs5FanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber, cpqSsBoxFanStatus }
DESCRIPTION
"Storage System fan status change.
The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current
fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Fan Status Change (8026)"
--#SUMMARY "Storage System fan status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8026
cpqSs5TempStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber, cpqSsBoxTempStatus }
DESCRIPTION
"Storage System temperature status change.
The agent has detected a change in the temperature status of a
storage system. The variable cpqSsBoxTempStatus indicates the
current temperature status.
User Action: If the temperature status is degraded or failed,
shutdown the storage system as soon as possible. Insure that
the storage system environment is being cooled properly and that
no components are overheated."
--#TYPE "Temperature Status Change (8027)"
--#SUMMARY "Storage System temperature status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8027
cpqSs5PwrSupplyStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber,
cpqSsBoxFltTolPwrSupplyStatus }
DESCRIPTION
"Storage system power supply status change.
The agent has detected a change in the power supply status of a
storage system. The variable cpqSsBoxFltTolPwrSupplyStatus
indicates the current power supply status.
User Action: If the power supply status is degraded, take action
to restore power or replace the failed power supply."
--#TYPE "Power Supply Status Change (8028)"
--#SUMMARY "Storage system power supply status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 8028
cpqSs6FanStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber,
cpqSsBoxFanStatus, cpqSsBoxLocationString }
DESCRIPTION
"Storage System fan status change.
The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current
fan status.
User Action: If the fan status is degraded or failed, replace
any failed fans."
--#TYPE "Fan Status Change (8029)"
--#SUMMARY "Storage System fan status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8029
cpqSs6TempStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber,
cpqSsBoxTempStatus, cpqSsBoxLocationString }
DESCRIPTION
"Storage System temperature status change.
The agent has detected a change in the temperature status of a
storage system. The variable cpqSsBoxTempStatus indicates the
current temperature status.
User Action: If the temperature status is degraded or failed,
shutdown the storage system as soon as possible. Insure that
the storage system environment is being cooled properly and that
no components are overheated."
--#TYPE "Temperature Status Change (8030)"
--#SUMMARY "Storage System temperature status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8030
cpqSs6PwrSupplyStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqSsBoxCntlrHwLocation,
cpqSsBoxCntlrIndex, cpqSsBoxBusIndex, cpqSsBoxVendor,
cpqSsBoxModel, cpqSsBoxSerialNumber,
cpqSsBoxFltTolPwrSupplyStatus, cpqSsBoxLocationString }
DESCRIPTION
"Storage system power supply status change.
The agent has detected a change in the power supply status of a
storage system. The variable cpqSsBoxFltTolPwrSupplyStatus
indicates the current power supply status.
User Action: If the power supply status is degraded, take action
to restore power or replace the failed power supply."
--#TYPE "Power Supply Status Change (8031)"
--#SUMMARY "Storage system power supply status changed to %d."
--#ARGUMENTS {8}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
::= 8031
END
Reference in New Issue View Git Blame Copy Permalink