668 lines
23 KiB
Plaintext
668 lines
23 KiB
Plaintext
-- Changes to RFC1658 - CHARACTER-MIB
|
|
-- Added IMPORT of TEXTUAL-CONVENTION macro.
|
|
-- Added IMPORT of DisplayString.
|
|
-- Removed unused IMPORT of NOTIFICATION-TYPE.
|
|
-- Removed unused IMPORT of transmission.
|
|
-- Need to add the following object-types to an object-group:
|
|
-- charPortInFlowType & charPortOutFlowType.
|
|
-- Syntax of object charSessConnectionId changed from
|
|
-- InstancePointer to OBJECT IDENTIFIER and import
|
|
-- of InstancePointer removed.
|
|
-- dperkins@scruznet.com
|
|
|
|
CHARACTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Counter32, Integer32, Gauge32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
AutonomousType,
|
|
-- InstancePointer,
|
|
DisplayString, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
mib-2
|
|
FROM RFC1213-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
|
|
char MODULE-IDENTITY
|
|
LAST-UPDATED "9405261700Z"
|
|
ORGANIZATION "IETF Character MIB Working Group"
|
|
CONTACT-INFO
|
|
" Bob Stewart
|
|
Postal: Xyplex, Inc.
|
|
295 Foster Street
|
|
Littleton, MA 01460
|
|
|
|
Tel: 508-952-4816
|
|
Fax: 508-952-4887
|
|
|
|
E-mail: rlstewart@eng.xyplex.com"
|
|
DESCRIPTION
|
|
"The MIB module for character stream devices."
|
|
::= { mib-2 19 }
|
|
|
|
PortIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each
|
|
character port in the managed system. It is
|
|
recommended that values are assigned contiguously
|
|
starting from 1. The value for each interface sub-
|
|
layer must remain constant at least from one re-
|
|
initialization of the entity's network management
|
|
system to the next re-initialization.
|
|
|
|
In a system where the character ports are attached
|
|
to hardware represented by an ifIndex, it is
|
|
conventional, but not required, to make the
|
|
character port index equal to the corresponding
|
|
ifIndex."
|
|
SYNTAX Integer32
|
|
|
|
|
|
-- Generic Character information
|
|
|
|
charNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of entries in charPortTable, regardless
|
|
of their current state."
|
|
::= { char 1 }
|
|
|
|
|
|
-- the Character Port table
|
|
|
|
charPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CharPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port entries. The number of entries is
|
|
given by the value of charNumber."
|
|
::= { char 2 }
|
|
|
|
charPortEntry OBJECT-TYPE
|
|
SYNTAX CharPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for a character port."
|
|
INDEX { charPortIndex }
|
|
::= { charPortTable 1 }
|
|
|
|
CharPortEntry ::=
|
|
SEQUENCE {
|
|
charPortIndex
|
|
PortIndex,
|
|
charPortName
|
|
DisplayString,
|
|
charPortType
|
|
INTEGER,
|
|
charPortHardware
|
|
AutonomousType,
|
|
charPortReset
|
|
INTEGER,
|
|
charPortAdminStatus
|
|
INTEGER,
|
|
charPortOperStatus
|
|
INTEGER,
|
|
charPortLastChange
|
|
TimeTicks,
|
|
charPortInFlowType
|
|
INTEGER,
|
|
charPortOutFlowType
|
|
INTEGER,
|
|
charPortInFlowState
|
|
INTEGER,
|
|
charPortOutFlowState
|
|
INTEGER,
|
|
charPortInCharacters
|
|
Counter32,
|
|
charPortOutCharacters
|
|
Counter32,
|
|
charPortAdminOrigin
|
|
INTEGER,
|
|
charPortSessionMaximum
|
|
INTEGER,
|
|
charPortSessionNumber
|
|
Gauge32,
|
|
charPortSessionIndex
|
|
INTEGER,
|
|
charPortInFlowTypes
|
|
OCTET STRING,
|
|
charPortOutFlowTypes
|
|
OCTET STRING,
|
|
charPortLowerIfIndex
|
|
InterfaceIndex
|
|
}
|
|
|
|
charPortIndex OBJECT-TYPE
|
|
SYNTAX PortIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value for each character port, perhaps
|
|
corresponding to the same value of ifIndex when the
|
|
character port is associated with a hardware port
|
|
represented by an ifIndex."
|
|
::= { charPortEntry 1 }
|
|
|
|
charPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively assigned name for the port,
|
|
typically with some local significance."
|
|
::= { charPortEntry 2 }
|
|
|
|
charPortType OBJECT-TYPE
|
|
SYNTAX INTEGER { physical(1), virtual(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's type, 'physical' if the port represents
|
|
an external hardware connector, 'virtual' if it does
|
|
not."
|
|
::= { charPortEntry 3 }
|
|
|
|
charPortHardware OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to hardware MIB definitions specific to
|
|
a physical port's external connector. For example,
|
|
if the connector is RS-232, then the value of this
|
|
object refers to a MIB sub-tree defining objects
|
|
specific to RS-232. If an agent is not configured
|
|
to have such values, the agent returns the object
|
|
identifier:
|
|
|
|
nullHardware OBJECT IDENTIFIER ::= { 0 0 }
|
|
"
|
|
::= { charPortEntry 4 }
|
|
|
|
charPortReset OBJECT-TYPE
|
|
SYNTAX INTEGER { ready(1), execute(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to force the port into a clean, initial
|
|
state, both hardware and software, disconnecting all
|
|
the port's existing sessions. In response to a
|
|
get-request or get-next-request, the agent always
|
|
returns 'ready' as the value. Setting the value to
|
|
'execute' causes a reset."
|
|
::= { charPortEntry 5 }
|
|
|
|
charPortAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2), off(3),
|
|
maintenance(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's desired state, independent of flow
|
|
control. 'enabled' indicates that the port is
|
|
allowed to pass characters and form new sessions.
|
|
'disabled' indicates that the port is allowed to
|
|
pass characters but not form new sessions. 'off'
|
|
indicates that the port is not allowed to pass
|
|
characters or have any sessions. 'maintenance'
|
|
indicates a maintenance mode, exclusive of normal
|
|
operation, such as running a test.
|
|
|
|
'enabled' corresponds to ifAdminStatus 'up'.
|
|
'disabled' and 'off' correspond to ifAdminStatus
|
|
'down'. 'maintenance' corresponds to ifAdminStatus
|
|
'test'."
|
|
::= { charPortEntry 6 }
|
|
|
|
charPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { up(1), down(2),
|
|
maintenance(3), absent(4), active(5) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's actual, operational state, independent
|
|
of flow control. 'up' indicates able to function
|
|
normally. 'down' indicates inability to function
|
|
for administrative or operational reasons.
|
|
'maintenance' indicates a maintenance mode,
|
|
exclusive of normal operation, such as running a
|
|
test. 'absent' indicates that port hardware is not
|
|
present. 'active' indicates up with a user present
|
|
(e.g. logged in).
|
|
|
|
'up' and 'active' correspond to ifOperStatus 'up'.
|
|
'down' and 'absent' correspond to ifOperStatus
|
|
'down'. 'maintenance' corresponds to ifOperStatus
|
|
'test'."
|
|
::= { charPortEntry 7 }
|
|
|
|
charPortLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the port entered
|
|
its current operational state. If the current state
|
|
was entered prior to the last reinitialization of
|
|
the local network management subsystem, then this
|
|
object contains a zero value."
|
|
::= { charPortEntry 8 }
|
|
|
|
-- charPortInFlowType is deprecated in favor of
|
|
-- charPortInFlowTypes
|
|
|
|
charPortInFlowType OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
|
|
ctsRts(4), dsrDtr(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port's type of input flow control. 'none'
|
|
indicates no flow control at this level or below.
|
|
'xonXoff' indicates software flow control by
|
|
recognizing XON and XOFF characters. 'hardware'
|
|
indicates flow control delegated to the lower level,
|
|
for example a parallel port.
|
|
|
|
'ctsRts' and 'dsrDtr' are specific to RS-232-like
|
|
ports. Although not architecturally pure, they are
|
|
included here for simplicity's sake."
|
|
::= { charPortEntry 9 }
|
|
|
|
|
|
-- charPortOutFlowType is deprecated in favor of
|
|
-- charPortOutFlowTypes
|
|
|
|
charPortOutFlowType OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),
|
|
ctsRts(4), dsrDtr(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port's type of output flow control. 'none'
|
|
indicates no flow control at this level or below.
|
|
'xonXoff' indicates software flow control by
|
|
recognizing XON and XOFF characters. 'hardware'
|
|
indicates flow control delegated to the lower level,
|
|
for example a parallel port.
|
|
|
|
'ctsRts' and 'dsrDtr' are specific to RS-232-like
|
|
ports. Although not architecturally pure, they are
|
|
included here for simplicy's sake."
|
|
::= { charPortEntry 10 }
|
|
|
|
charPortInFlowState OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of input flow control
|
|
on the port. 'none' indicates not applicable.
|
|
'unknown' indicates this level does not know.
|
|
'stop' indicates flow not allowed. 'go' indicates
|
|
flow allowed."
|
|
::= { charPortEntry 11 }
|
|
|
|
charPortOutFlowState OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of output flow
|
|
control on the port. 'none' indicates not
|
|
applicable. 'unknown' indicates this level does not
|
|
know. 'stop' indicates flow not allowed. 'go'
|
|
indicates flow allowed."
|
|
::= { charPortEntry 12 }
|
|
|
|
charPortInCharacters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of characters detected as input from
|
|
the port since system re-initialization and while
|
|
the port operational state was 'up', 'active', or
|
|
'maintenance', including, for example, framing, flow
|
|
control (i.e. XON and XOFF), each occurrence of a
|
|
BREAK condition, locally-processed input, and input
|
|
sent to all sessions."
|
|
::= { charPortEntry 13 }
|
|
|
|
charPortOutCharacters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of characters detected as output to
|
|
the port since system re-initialization and while
|
|
the port operational state was 'up', 'active', or
|
|
'maintenance', including, for example, framing, flow
|
|
control (i.e. XON and XOFF), each occurrence of a
|
|
BREAK condition, locally-created output, and output
|
|
received from all sessions."
|
|
::= { charPortEntry 14 }
|
|
|
|
charPortAdminOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER { dynamic(1), network(2), local(3),
|
|
none(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively allowed origin for
|
|
establishing session on the port. 'dynamic' allows
|
|
'network' or 'local' session establishment. 'none'
|
|
disallows session establishment."
|
|
::= { charPortEntry 15 }
|
|
|
|
charPortSessionMaximum OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of concurrent sessions allowed
|
|
on the port. A value of -1 indicates no maximum.
|
|
Setting the maximum to less than the current number
|
|
of sessions has unspecified results."
|
|
::= { charPortEntry 16 }
|
|
|
|
charPortSessionNumber OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of open sessions on the port that are in
|
|
the connecting, connected, or disconnecting state."
|
|
::= { charPortEntry 17 }
|
|
|
|
charPortSessionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of charSessIndex for the port's first or
|
|
only active session. If the port has no active
|
|
session, the agent returns the value zero."
|
|
::= { charPortEntry 18 }
|
|
|
|
charPortInFlowTypes OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's types of input flow control at the
|
|
software level. Hardware-level flow control is
|
|
independently controlled by the appropriate
|
|
hardware-level MIB.
|
|
|
|
A value of zero indicates no flow control.
|
|
Depending on the specific implementation, any or
|
|
all combinations of flow control may be chosen by
|
|
adding the values:
|
|
|
|
128 xonXoff, recognizing XON and XOFF characters
|
|
64 enqHost, ENQ/ACK to allow input to host
|
|
32 enqTerm, ACK to allow output to port
|
|
"
|
|
::= { charPortEntry 19 }
|
|
|
|
charPortOutFlowTypes OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's types of output flow control at the
|
|
software level. Hardware-level flow control is
|
|
independently controlled by the appropriate
|
|
hardware-level MIB.
|
|
|
|
A value of zero indicates no flow control.
|
|
Depending on the specific implementation, any or
|
|
all combinations of flow control may be chosen by
|
|
adding the values:
|
|
|
|
128 xonXoff, recognizing XON and XOFF characters
|
|
64 enqHost, ENQ/ACK to allow input to host
|
|
32 enqTerm, ACK to allow output to port
|
|
"
|
|
::= { charPortEntry 20 }
|
|
|
|
charPortLowerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the lower level hardware supporting
|
|
this character port, zero if none."
|
|
::= { charPortEntry 21 }
|
|
|
|
|
|
-- the Character Session table
|
|
|
|
charSessTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CharSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of port session entries."
|
|
::= { char 3 }
|
|
|
|
charSessEntry OBJECT-TYPE
|
|
SYNTAX CharSessEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status and parameter values for a character port
|
|
session."
|
|
INDEX { charSessPortIndex, charSessIndex }
|
|
::= { charSessTable 1 }
|
|
|
|
CharSessEntry ::=
|
|
SEQUENCE {
|
|
charSessPortIndex
|
|
PortIndex,
|
|
charSessIndex
|
|
INTEGER,
|
|
charSessKill
|
|
INTEGER,
|
|
charSessState
|
|
INTEGER,
|
|
charSessProtocol
|
|
AutonomousType,
|
|
charSessOperOrigin
|
|
INTEGER,
|
|
charSessInCharacters
|
|
Counter32,
|
|
charSessOutCharacters
|
|
Counter32,
|
|
charSessConnectionId
|
|
-- InstancePointer,
|
|
OBJECT IDENTIFIER,
|
|
charSessStartTime
|
|
TimeTicks
|
|
}
|
|
|
|
charSessPortIndex OBJECT-TYPE
|
|
SYNTAX PortIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of charPortIndex for the port to which
|
|
this session belongs."
|
|
::= { charSessEntry 1 }
|
|
|
|
charSessIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The session index in the context of the port, a
|
|
non-zero positive integer. Session indexes within a
|
|
port need not be sequential. Session indexes may be
|
|
reused for different ports. For example, port 1 and
|
|
port 3 may both have a session 2 at the same time.
|
|
Session indexes may have any valid integer value,
|
|
with any meaning convenient to the agent
|
|
implementation."
|
|
::= { charSessEntry 2 }
|
|
|
|
charSessKill OBJECT-TYPE
|
|
SYNTAX INTEGER { ready(1), execute(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A control to terminate the session. In response to
|
|
a get-request or get-next-request, the agent always
|
|
returns 'ready' as the value. Setting the value to
|
|
'execute' causes termination."
|
|
::= { charSessEntry 3 }
|
|
|
|
charSessState OBJECT-TYPE
|
|
SYNTAX INTEGER { connecting(1), connected(2),
|
|
disconnecting(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of the session,
|
|
disregarding flow control. 'connected' indicates
|
|
that character data could flow on the network side
|
|
of session. 'connecting' indicates moving from
|
|
nonexistent toward 'connected'. 'disconnecting'
|
|
indicates moving from 'connected' or 'connecting' to
|
|
nonexistent."
|
|
::= { charSessEntry 4 }
|
|
|
|
charSessProtocol OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network protocol over which the session is
|
|
running. Other OBJECT IDENTIFIER values may be
|
|
defined elsewhere, in association with specific
|
|
protocols. However, this document assigns those of
|
|
known interest as of this writing."
|
|
::= { charSessEntry 5 }
|
|
|
|
wellKnownProtocols OBJECT IDENTIFIER ::= { char 4 }
|
|
|
|
protocolOther OBJECT IDENTIFIER ::= { wellKnownProtocols 1 }
|
|
protocolTelnet OBJECT IDENTIFIER ::= { wellKnownProtocols 2 }
|
|
protocolRlogin OBJECT IDENTIFIER ::= { wellKnownProtocols 3 }
|
|
protocolLat OBJECT IDENTIFIER ::= { wellKnownProtocols 4 }
|
|
protocolX29 OBJECT IDENTIFIER ::= { wellKnownProtocols 5 }
|
|
protocolVtp OBJECT IDENTIFIER ::= { wellKnownProtocols 6 }
|
|
|
|
|
|
charSessOperOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER { unknown(1), network(2), local(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The session's source of establishment."
|
|
::= { charSessEntry 6 }
|
|
|
|
charSessInCharacters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This session's subset of charPortInCharacters."
|
|
::= { charSessEntry 7 }
|
|
|
|
charSessOutCharacters OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This session's subset of charPortOutCharacters."
|
|
::= { charSessEntry 8 }
|
|
|
|
charSessConnectionId OBJECT-TYPE
|
|
-- SYNTAX InstancePointer
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to additional local MIB information.
|
|
This should be the highest available related MIB,
|
|
corresponding to charSessProtocol, such as Telnet.
|
|
For example, the value for a TCP connection (in the
|
|
absence of a Telnet MIB) is the object identifier of
|
|
tcpConnState. If an agent is not configured to have
|
|
such values, the agent returns the object
|
|
identifier:
|
|
|
|
nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }
|
|
"
|
|
::= { charSessEntry 9 }
|
|
|
|
charSessStartTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime in MIB-2 when the session
|
|
entered connecting state."
|
|
::= { charSessEntry 10 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
charConformance OBJECT IDENTIFIER ::= { char 5 }
|
|
|
|
charGroups OBJECT IDENTIFIER ::= { charConformance 1 }
|
|
charCompliances OBJECT IDENTIFIER ::= { charConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
charCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMPv2 entities
|
|
which have Character hardware interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { charGroup }
|
|
::= { charCompliances 1 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
charGroup OBJECT-GROUP
|
|
OBJECTS { charNumber, charPortIndex, charPortName,
|
|
charPortType, charPortHardware, charPortReset,
|
|
charPortAdminStatus, charPortOperStatus,
|
|
charPortLastChange,
|
|
charPortInFlowState, charPortOutFlowState,
|
|
charPortAdminOrigin, charPortSessionMaximum,
|
|
charPortInFlowTypes, charPortOutFlowTypes,
|
|
charPortInCharacters, charPortOutCharacters,
|
|
charPortSessionNumber, charPortSessionIndex,
|
|
charPortLowerIfIndex,
|
|
charSessPortIndex, charSessIndex,
|
|
charSessKill, charSessState,
|
|
charSessProtocol, charSessOperOrigin,
|
|
charSessInCharacters, charSessOutCharacters,
|
|
charSessConnectionId, charSessStartTime }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
applicable to all Character interfaces."
|
|
::= { charGroups 1 }
|
|
|
|
END
|
|
|