783 lines
25 KiB
Plaintext
783 lines
25 KiB
Plaintext
NOTIFICATION-LOG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32,
|
|
TimeTicks, Counter32, Counter64,
|
|
IpAddress, Opaque, mib-2 FROM SNMPv2-SMI
|
|
TimeStamp, DateAndTime,
|
|
StorageType, RowStatus,
|
|
TAddress, TDomain FROM SNMPv2-TC
|
|
SnmpAdminString, SnmpEngineID FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF;
|
|
|
|
notificationLogMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200011270000Z" -- 27 November 2000
|
|
ORGANIZATION "IETF Distributed Management Working Group"
|
|
CONTACT-INFO "Ramanathan Kavasseri
|
|
Cisco Systems, Inc.
|
|
170 West Tasman Drive,
|
|
San Jose CA 95134-1706.
|
|
Phone: +1 408 527 2446
|
|
Email: ramk@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module for logging SNMP Notifications, that is, Traps
|
|
|
|
|
|
and Informs."
|
|
-- Revision History
|
|
|
|
REVISION "200011270000Z" -- 27 November 2000
|
|
DESCRIPTION "This is the initial version of this MIB.
|
|
Published as RFC 3014"
|
|
::= { mib-2 92 }
|
|
|
|
|
|
notificationLogMIBObjects OBJECT IDENTIFIER ::= { notificationLogMIB 1 }
|
|
|
|
nlmConfig OBJECT IDENTIFIER ::= { notificationLogMIBObjects 1 }
|
|
nlmStats OBJECT IDENTIFIER ::= { notificationLogMIBObjects 2 }
|
|
nlmLog OBJECT IDENTIFIER ::= { notificationLogMIBObjects 3 }
|
|
|
|
--
|
|
-- Configuration Section
|
|
--
|
|
|
|
nlmConfigGlobalEntryLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of notification entries that may be held
|
|
in nlmLogTable for all nlmLogNames added together. A particular
|
|
setting does not guarantee that much data can be held.
|
|
|
|
If an application changes the limit while there are
|
|
Notifications in the log, the oldest Notifications MUST be
|
|
discarded to bring the log down to the new limit - thus the
|
|
value of nlmConfigGlobalEntryLimit MUST take precedence over
|
|
the values of nlmConfigGlobalAgeOut and nlmConfigLogEntryLimit,
|
|
even if the Notification being discarded has been present for
|
|
fewer minutes than the value of nlmConfigGlobalAgeOut, or if
|
|
the named log has fewer entries than that specified in
|
|
nlmConfigLogEntryLimit.
|
|
|
|
A value of 0 means no limit.
|
|
|
|
Please be aware that contention between multiple managers
|
|
trying to set this object to different values MAY affect the
|
|
reliability and completeness of data seen by each manager."
|
|
DEFVAL { 0 }
|
|
::= { nlmConfig 1 }
|
|
|
|
nlmConfigGlobalAgeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
|
|
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of minutes a Notification SHOULD be kept in a log
|
|
before it is automatically removed.
|
|
|
|
If an application changes the value of nlmConfigGlobalAgeOut,
|
|
Notifications older than the new time MAY be discarded to meet the
|
|
new time.
|
|
|
|
A value of 0 means no age out.
|
|
|
|
Please be aware that contention between multiple managers
|
|
trying to set this object to different values MAY affect the
|
|
reliability and completeness of data seen by each manager."
|
|
DEFVAL { 1440 } -- 24 hours
|
|
::= { nlmConfig 2 }
|
|
|
|
|
|
--
|
|
-- Basic Log Configuration Table
|
|
--
|
|
|
|
nlmConfigLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlmConfigLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of logging control entries."
|
|
::= { nlmConfig 3 }
|
|
|
|
nlmConfigLogEntry OBJECT-TYPE
|
|
SYNTAX NlmConfigLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A logging control entry. Depending on the entry's storage type
|
|
entries may be supplied by the system or created and deleted by
|
|
applications using nlmConfigLogEntryStatus."
|
|
INDEX { nlmLogName }
|
|
::= { nlmConfigLogTable 1 }
|
|
|
|
NlmConfigLogEntry ::= SEQUENCE {
|
|
nlmLogName SnmpAdminString,
|
|
nlmConfigLogFilterName SnmpAdminString,
|
|
nlmConfigLogEntryLimit Unsigned32,
|
|
nlmConfigLogAdminStatus INTEGER,
|
|
|
|
|
|
nlmConfigLogOperStatus INTEGER,
|
|
nlmConfigLogStorageType StorageType,
|
|
nlmConfigLogEntryStatus RowStatus
|
|
}
|
|
|
|
nlmLogName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the log.
|
|
|
|
An implementation may allow multiple named logs, up to some
|
|
implementation-specific limit (which may be none). A
|
|
zero-length log name is reserved for creation and deletion by
|
|
the managed system, and MUST be used as the default log name by
|
|
systems that do not support named logs."
|
|
::= { nlmConfigLogEntry 1 }
|
|
|
|
nlmConfigLogFilterName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value of snmpNotifyFilterProfileName as used as an index
|
|
into the snmpNotifyFilterTable in the SNMP Notification MIB,
|
|
specifying the locally or remotely originated Notifications
|
|
to be filtered out and not logged in this log.
|
|
|
|
A zero-length value or a name that does not identify an
|
|
existing entry in snmpNotifyFilterTable indicate no
|
|
Notifications are to be logged in this log."
|
|
DEFVAL { ''H }
|
|
::= { nlmConfigLogEntry 2 }
|
|
|
|
nlmConfigLogEntryLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of notification entries that can be held in
|
|
nlmLogTable for this named log. A particular setting does not
|
|
guarantee that that much data can be held.
|
|
|
|
If an application changes the limit while there are
|
|
Notifications in the log, the oldest Notifications are discarded
|
|
to bring the log down to the new limit.
|
|
|
|
|
|
|
|
A value of 0 indicates no limit.
|
|
|
|
Please be aware that contention between multiple managers
|
|
trying to set this object to different values MAY affect the
|
|
reliability and completeness of data seen by each manager."
|
|
DEFVAL { 0 }
|
|
::= { nlmConfigLogEntry 3 }
|
|
|
|
nlmConfigLogAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control to enable or disable the log without otherwise
|
|
disturbing the log's entry.
|
|
|
|
Please be aware that contention between multiple managers
|
|
trying to set this object to different values MAY affect the
|
|
reliability and completeness of data seen by each manager."
|
|
DEFVAL { enabled }
|
|
::= { nlmConfigLogEntry 4 }
|
|
|
|
nlmConfigLogOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(1), operational(2), noFilter(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of this log:
|
|
|
|
disabled administratively disabled
|
|
|
|
operational administratively enabled and working
|
|
|
|
noFilter administratively enabled but either
|
|
nlmConfigLogFilterName is zero length
|
|
or does not name an existing entry in
|
|
snmpNotifyFilterTable"
|
|
::= { nlmConfigLogEntry 5 }
|
|
|
|
nlmConfigLogStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type of this conceptual row."
|
|
::= { nlmConfigLogEntry 6 }
|
|
|
|
nlmConfigLogEntryStatus OBJECT-TYPE
|
|
|
|
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Control for creating and deleting entries. Entries may be
|
|
modified while active.
|
|
|
|
For non-null-named logs, the managed system records the security
|
|
credentials from the request that sets nlmConfigLogStatus
|
|
to 'active' and uses that identity to apply access control to
|
|
the objects in the Notification to decide if that Notification
|
|
may be logged."
|
|
::= { nlmConfigLogEntry 7 }
|
|
|
|
--
|
|
-- Statistics Section
|
|
--
|
|
|
|
nlmStatsGlobalNotificationsLogged OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "notifications"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Notifications put into the nlmLogTable. This
|
|
counts a Notification once for each log entry, so a Notification
|
|
put into multiple logs is counted multiple times."
|
|
::= { nlmStats 1 }
|
|
|
|
nlmStatsGlobalNotificationsBumped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "notifications"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of log entries discarded to make room for a new entry
|
|
due to lack of resources or the value of nlmConfigGlobalEntryLimit
|
|
or nlmConfigLogEntryLimit. This does not include entries discarded
|
|
due to the value of nlmConfigGlobalAgeOut."
|
|
::= { nlmStats 2 }
|
|
|
|
--
|
|
-- Log Statistics Table
|
|
--
|
|
|
|
nlmStatsLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlmStatsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Notification log statistics entries."
|
|
::= { nlmStats 3 }
|
|
|
|
nlmStatsLogEntry OBJECT-TYPE
|
|
SYNTAX NlmStatsLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Notification log statistics entry."
|
|
AUGMENTS { nlmConfigLogEntry }
|
|
::= { nlmStatsLogTable 1 }
|
|
|
|
NlmStatsLogEntry ::= SEQUENCE {
|
|
nlmStatsLogNotificationsLogged Counter32,
|
|
nlmStatsLogNotificationsBumped Counter32
|
|
}
|
|
|
|
nlmStatsLogNotificationsLogged OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "notifications"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of Notifications put in this named log."
|
|
::= { nlmStatsLogEntry 1 }
|
|
|
|
nlmStatsLogNotificationsBumped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "notifications"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of log entries discarded from this named log to make
|
|
room for a new entry due to lack of resources or the value of
|
|
nlmConfigGlobalEntryLimit or nlmConfigLogEntryLimit. This does not
|
|
include entries discarded due to the value of
|
|
nlmConfigGlobalAgeOut."
|
|
::= { nlmStatsLogEntry 2 }
|
|
|
|
|
|
--
|
|
-- Log Section
|
|
--
|
|
|
|
--
|
|
-- Log Table
|
|
--
|
|
|
|
nlmLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlmLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of Notification log entries.
|
|
|
|
It is an implementation-specific matter whether entries in this
|
|
table are preserved across initializations of the management
|
|
system. In general one would expect that they are not.
|
|
|
|
Note that keeping entries across initializations of the
|
|
management system leads to some confusion with counters and
|
|
TimeStamps, since both of those are based on sysUpTime, which
|
|
resets on management initialization. In this situation,
|
|
counters apply only after the reset and nlmLogTime for entries
|
|
made before the reset MUST be set to 0."
|
|
::= { nlmLog 1 }
|
|
|
|
nlmLogEntry OBJECT-TYPE
|
|
SYNTAX NlmLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Notification log entry.
|
|
|
|
Entries appear in this table when Notifications occur and pass
|
|
filtering by nlmConfigLogFilterName and access control. They are
|
|
removed to make way for new entries due to lack of resources or
|
|
the values of nlmConfigGlobalEntryLimit, nlmConfigGlobalAgeOut, or
|
|
nlmConfigLogEntryLimit.
|
|
|
|
If adding an entry would exceed nlmConfigGlobalEntryLimit or system
|
|
resources in general, the oldest entry in any log SHOULD be removed
|
|
to make room for the new one.
|
|
|
|
If adding an entry would exceed nlmConfigLogEntryLimit the oldest
|
|
entry in that log SHOULD be removed to make room for the new one.
|
|
|
|
Before the managed system puts a locally-generated Notification
|
|
into a non-null-named log it assures that the creator of the log
|
|
has access to the information in the Notification. If not it
|
|
does not log that Notification in that log."
|
|
INDEX { nlmLogName, nlmLogIndex }
|
|
::= { nlmLogTable 1 }
|
|
|
|
|
|
|
|
NlmLogEntry ::= SEQUENCE {
|
|
nlmLogIndex Unsigned32,
|
|
nlmLogTime TimeStamp,
|
|
nlmLogDateAndTime DateAndTime,
|
|
nlmLogEngineID SnmpEngineID,
|
|
nlmLogEngineTAddress TAddress,
|
|
nlmLogEngineTDomain TDomain,
|
|
nlmLogContextEngineID SnmpEngineID,
|
|
nlmLogContextName SnmpAdminString,
|
|
nlmLogNotificationID OBJECT IDENTIFIER
|
|
}
|
|
|
|
nlmLogIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A monotonically increasing integer for the sole purpose of
|
|
indexing entries within the named log. When it reaches the
|
|
maximum value, an extremely unlikely event, the agent wraps the
|
|
value back to 1."
|
|
::= { nlmLogEntry 1 }
|
|
|
|
nlmLogTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the entry was placed in the log. If
|
|
the entry occurred before the most recent management system
|
|
initialization this object value MUST be set to zero."
|
|
::= { nlmLogEntry 2 }
|
|
|
|
nlmLogDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local date and time when the entry was logged, instantiated
|
|
only by systems that have date and time capability."
|
|
::= { nlmLogEntry 3 }
|
|
|
|
nlmLogEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identification of the SNMP engine at which the Notification
|
|
|
|
|
|
originated.
|
|
|
|
If the log can contain Notifications from only one engine
|
|
or the Trap is in SNMPv1 format, this object is a zero-length
|
|
string."
|
|
::= { nlmLogEntry 4 }
|
|
|
|
nlmLogEngineTAddress OBJECT-TYPE
|
|
SYNTAX TAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transport service address of the SNMP engine from which the
|
|
Notification was received, formatted according to the corresponding
|
|
value of nlmLogEngineTDomain. This is used to identify the source
|
|
of an SNMPv1 trap, since an nlmLogEngineId cannot be extracted
|
|
from the SNMPv1 trap pdu.
|
|
|
|
This object MUST always be instantiated, even if the log
|
|
can contain Notifications from only one engine.
|
|
|
|
Please be aware that the nlmLogEngineTAddress may not uniquely
|
|
identify the SNMP engine from which the Notification was received.
|
|
For example, if an SNMP engine uses DHCP or NAT to obtain
|
|
ip addresses, the address it uses may be shared with other
|
|
network devices, and hence will not uniquely identify the
|
|
SNMP engine."
|
|
::= { nlmLogEntry 5 }
|
|
|
|
nlmLogEngineTDomain OBJECT-TYPE
|
|
SYNTAX TDomain
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the kind of transport service by which a Notification
|
|
was received from an SNMP engine. nlmLogEngineTAddress contains
|
|
the transport service address of the SNMP engine from which
|
|
this Notification was received.
|
|
|
|
Possible values for this object are presently found in the
|
|
Transport Mappings for SNMPv2 document (RFC 1906 [8])."
|
|
::= { nlmLogEntry 6 }
|
|
|
|
nlmLogContextEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"If the Notification was received in a protocol which has a
|
|
contextEngineID element like SNMPv3, this object has that value.
|
|
Otherwise its value is a zero-length string."
|
|
::= { nlmLogEntry 7 }
|
|
|
|
nlmLogContextName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the SNMP MIB context from which the Notification came.
|
|
For SNMPv1 Traps this is the community string from the Trap."
|
|
::= { nlmLogEntry 8 }
|
|
|
|
nlmLogNotificationID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NOTIFICATION-TYPE object identifier of the Notification that
|
|
occurred."
|
|
::= { nlmLogEntry 9 }
|
|
|
|
--
|
|
-- Log Variable Table
|
|
--
|
|
|
|
nlmLogVariableTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlmLogVariableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of variables to go with Notification log entries."
|
|
::= { nlmLog 2 }
|
|
|
|
nlmLogVariableEntry OBJECT-TYPE
|
|
SYNTAX NlmLogVariableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Notification log entry variable.
|
|
|
|
Entries appear in this table when there are variables in
|
|
the varbind list of a Notification in nlmLogTable."
|
|
INDEX { nlmLogName, nlmLogIndex, nlmLogVariableIndex }
|
|
::= { nlmLogVariableTable 1 }
|
|
|
|
NlmLogVariableEntry ::= SEQUENCE {
|
|
|
|
|
|
nlmLogVariableIndex Unsigned32,
|
|
nlmLogVariableID OBJECT IDENTIFIER,
|
|
nlmLogVariableValueType INTEGER,
|
|
nlmLogVariableCounter32Val Counter32,
|
|
nlmLogVariableUnsigned32Val Unsigned32,
|
|
nlmLogVariableTimeTicksVal TimeTicks,
|
|
nlmLogVariableInteger32Val Integer32,
|
|
nlmLogVariableOctetStringVal OCTET STRING,
|
|
nlmLogVariableIpAddressVal IpAddress,
|
|
nlmLogVariableOidVal OBJECT IDENTIFIER,
|
|
nlmLogVariableCounter64Val Counter64,
|
|
nlmLogVariableOpaqueVal Opaque
|
|
}
|
|
|
|
nlmLogVariableIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A monotonically increasing integer, starting at 1 for a given
|
|
nlmLogIndex, for indexing variables within the logged
|
|
Notification."
|
|
::= { nlmLogVariableEntry 1 }
|
|
|
|
nlmLogVariableID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The variable's object identifier."
|
|
::= { nlmLogVariableEntry 2 }
|
|
|
|
nlmLogVariableValueType OBJECT-TYPE
|
|
SYNTAX INTEGER { counter32(1), unsigned32(2), timeTicks(3),
|
|
integer32(4), ipAddress(5), octetString(6),
|
|
objectId(7), counter64(8), opaque(9) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the value. One and only one of the value
|
|
objects that follow must be instantiated, based on this type."
|
|
::= { nlmLogVariableEntry 3 }
|
|
|
|
nlmLogVariableCounter32Val OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
"The value when nlmLogVariableType is 'counter32'."
|
|
::= { nlmLogVariableEntry 4 }
|
|
|
|
nlmLogVariableUnsigned32Val OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'unsigned32'."
|
|
::= { nlmLogVariableEntry 5 }
|
|
|
|
nlmLogVariableTimeTicksVal OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'timeTicks'."
|
|
::= { nlmLogVariableEntry 6 }
|
|
|
|
nlmLogVariableInteger32Val OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'integer32'."
|
|
::= { nlmLogVariableEntry 7 }
|
|
|
|
nlmLogVariableOctetStringVal OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'octetString'."
|
|
::= { nlmLogVariableEntry 8 }
|
|
|
|
nlmLogVariableIpAddressVal OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'ipAddress'.
|
|
Although this seems to be unfriendly for IPv6, we
|
|
have to recognize that there are a number of older
|
|
MIBs that do contain an IPv4 format address, known
|
|
as IpAddress.
|
|
|
|
IPv6 addresses are represented using TAddress or
|
|
InetAddress, and so the underlying datatype is
|
|
|
|
|
|
OCTET STRING, and their value would be stored in
|
|
the nlmLogVariableOctetStringVal column."
|
|
::= { nlmLogVariableEntry 9 }
|
|
|
|
nlmLogVariableOidVal OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'objectId'."
|
|
::= { nlmLogVariableEntry 10 }
|
|
|
|
nlmLogVariableCounter64Val OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'counter64'."
|
|
::= { nlmLogVariableEntry 11 }
|
|
|
|
nlmLogVariableOpaqueVal OBJECT-TYPE
|
|
SYNTAX Opaque
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value when nlmLogVariableType is 'opaque'."
|
|
::= { nlmLogVariableEntry 12 }
|
|
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
|
|
notificationLogMIBConformance OBJECT IDENTIFIER ::=
|
|
{ notificationLogMIB 3 }
|
|
notificationLogMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ notificationLogMIBConformance 1 }
|
|
notificationLogMIBGroups OBJECT IDENTIFIER ::=
|
|
{ notificationLogMIBConformance 2 }
|
|
|
|
-- Compliance
|
|
|
|
notificationLogMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the Notification Log MIB."
|
|
MODULE -- this module
|
|
|
|
|
|
MANDATORY-GROUPS {
|
|
notificationLogConfigGroup,
|
|
notificationLogStatsGroup,
|
|
notificationLogLogGroup
|
|
}
|
|
|
|
OBJECT nlmConfigGlobalEntryLimit
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Implementations may choose a limit and not allow it to be
|
|
changed or may enforce an upper or lower bound on the
|
|
limit."
|
|
|
|
OBJECT nlmConfigLogEntryLimit
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Implementations may choose a limit and not allow it to be
|
|
changed or may enforce an upper or lower bound on the
|
|
limit."
|
|
|
|
OBJECT nlmConfigLogEntryStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Implementations may disallow the creation of named logs."
|
|
|
|
GROUP notificationLogDateGroup
|
|
DESCRIPTION
|
|
"This group is mandatory on systems that keep wall clock
|
|
date and time and should not be implemented on systems that
|
|
do not have a wall clock date."
|
|
|
|
::= { notificationLogMIBCompliances 1 }
|
|
|
|
-- Units of Conformance
|
|
|
|
notificationLogConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nlmConfigGlobalEntryLimit,
|
|
nlmConfigGlobalAgeOut,
|
|
nlmConfigLogFilterName,
|
|
nlmConfigLogEntryLimit,
|
|
nlmConfigLogAdminStatus,
|
|
nlmConfigLogOperStatus,
|
|
nlmConfigLogStorageType,
|
|
nlmConfigLogEntryStatus
|
|
}
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification log configuration management."
|
|
::= { notificationLogMIBGroups 1 }
|
|
|
|
notificationLogStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nlmStatsGlobalNotificationsLogged,
|
|
nlmStatsGlobalNotificationsBumped,
|
|
nlmStatsLogNotificationsLogged,
|
|
nlmStatsLogNotificationsBumped
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification log statistics."
|
|
::= { notificationLogMIBGroups 2 }
|
|
|
|
notificationLogLogGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nlmLogTime,
|
|
nlmLogEngineID,
|
|
nlmLogEngineTAddress,
|
|
nlmLogEngineTDomain,
|
|
nlmLogContextEngineID,
|
|
nlmLogContextName,
|
|
nlmLogNotificationID,
|
|
nlmLogVariableID,
|
|
nlmLogVariableValueType,
|
|
nlmLogVariableCounter32Val,
|
|
nlmLogVariableUnsigned32Val,
|
|
nlmLogVariableTimeTicksVal,
|
|
nlmLogVariableInteger32Val,
|
|
nlmLogVariableOctetStringVal,
|
|
nlmLogVariableIpAddressVal,
|
|
nlmLogVariableOidVal,
|
|
nlmLogVariableCounter64Val,
|
|
nlmLogVariableOpaqueVal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification log data."
|
|
::= { notificationLogMIBGroups 3 }
|
|
|
|
notificationLogDateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
nlmLogDateAndTime
|
|
}
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION
|
|
"Conditionally mandatory notification log data.
|
|
This group is mandatory on systems that keep wall
|
|
clock date and time and should not be implemented
|
|
on systems that do not have a wall clock date."
|
|
::= { notificationLogMIBGroups 4 }
|
|
|
|
END
|