499 lines
15 KiB
Plaintext
499 lines
15 KiB
Plaintext
APPLICATION-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, Counter32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
mib-2
|
|
FROM RFC1213-MIB
|
|
DisplayString, TimeStamp
|
|
FROM SNMPv2-TC;
|
|
|
|
|
|
-- Textual conventions
|
|
|
|
-- DistinguishedName [5] is used to refer to objects in the
|
|
-- directory.
|
|
|
|
DistinguishedName ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Distinguished Name represented in accordance with
|
|
RFC1485."
|
|
SYNTAX DisplayString
|
|
|
|
application MODULE-IDENTITY
|
|
LAST-UPDATED "9311280000Z"
|
|
ORGANIZATION "IETF Mail and Directory Management Working Group"
|
|
CONTACT-INFO
|
|
" Ned Freed
|
|
|
|
Postal: Innosoft International, Inc.
|
|
250 West First Street, Suite 240
|
|
Claremont, CA 91711
|
|
US
|
|
|
|
Tel: +1 909 624 7907
|
|
Fax: +1 909 621 5319
|
|
|
|
E-Mail: ned@innosoft.com"
|
|
DESCRIPTION
|
|
"The MIB module describing network service applications"
|
|
::= { mib-2 27 }
|
|
|
|
-- The basic applTable contains a list of the application
|
|
-- entities.
|
|
|
|
|
|
|
|
|
|
|
|
applTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ApplEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table holding objects which apply to all different
|
|
kinds of applications providing network services."
|
|
::= {application 1}
|
|
|
|
applEntry OBJECT-TYPE
|
|
SYNTAX ApplEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry associated with a network service application."
|
|
INDEX {applIndex}
|
|
::= {applTable 1}
|
|
|
|
ApplEntry ::= SEQUENCE {
|
|
applIndex
|
|
INTEGER,
|
|
applName
|
|
DisplayString,
|
|
applDirectoryName
|
|
DistinguishedName,
|
|
applVersion
|
|
DisplayString,
|
|
applUptime
|
|
TimeStamp,
|
|
applOperStatus
|
|
INTEGER,
|
|
applLastChange
|
|
TimeStamp,
|
|
applInboundAssociations
|
|
Gauge32,
|
|
applOutboundAssociations
|
|
Gauge32,
|
|
applAccumulatedInboundAssociations
|
|
Counter32,
|
|
applAccumulatedOutboundAssociations
|
|
Counter32,
|
|
applLastInboundActivity
|
|
TimeStamp,
|
|
applLastOutboundActivity
|
|
TimeStamp,
|
|
applRejectedInboundAssociations
|
|
Counter32,
|
|
applFailedOutboundAssociations
|
|
|
|
|
|
|
|
|
|
Counter32
|
|
}
|
|
|
|
applIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to uniquely identify the network service
|
|
application."
|
|
::= {applEntry 1}
|
|
|
|
applName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name the network service application chooses to be
|
|
known by."
|
|
::= {applEntry 2}
|
|
|
|
applDirectoryName OBJECT-TYPE
|
|
SYNTAX DistinguishedName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Distinguished Name of the directory entry where
|
|
static information about this application is stored.
|
|
An empty string indicates that no information about
|
|
the application is available in the directory."
|
|
::= {applEntry 3}
|
|
|
|
applVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of network service application software."
|
|
::= {applEntry 4}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
applUptime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the network service
|
|
application was last initialized. If the application was
|
|
last initialized prior to the last initialization of the
|
|
network management subsystem, then this object contains
|
|
a zero value."
|
|
::= {applEntry 5}
|
|
|
|
applOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
halted(3),
|
|
congested(4),
|
|
restarting(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the operational status of the network service
|
|
application. 'down' indicates that the network service is
|
|
not available. 'running' indicates that the network service
|
|
is operational and available. 'halted' indicates that the
|
|
service is operational but not available. 'congested'
|
|
indicates that the service is operational but no additional
|
|
inbound associations can be accomodated. 'restarting'
|
|
indicates that the service is currently unavailable but is
|
|
in the process of restarting and will be available soon."
|
|
::= {applEntry 6}
|
|
|
|
applLastChange OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the network service
|
|
application entered its current operational state. If
|
|
the current state was entered prior to the last
|
|
initialization of the local network management subsystem,
|
|
then this object contains a zero value."
|
|
::= {applEntry 7}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
applInboundAssociations OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of current associations to the network service
|
|
application, where it is the responder. For dynamic single
|
|
threaded processes, this will be the number of application
|
|
instances."
|
|
::= {applEntry 8}
|
|
|
|
applOutboundAssociations OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of current associations to the network service
|
|
application, where it is the initiator. For dynamic single
|
|
threaded processes, this will be the number of application
|
|
instances."
|
|
::= {applEntry 9}
|
|
|
|
applAccumulatedInboundAssociations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of associations to the application entity
|
|
since application initialization, where it was the responder.
|
|
For dynamic single threaded processes, this will be the
|
|
number of application instances."
|
|
::= {applEntry 10}
|
|
|
|
applAccumulatedOutboundAssociations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of associations to the application entity
|
|
since application initialization, where it was the initiator.
|
|
For dynamic single threaded processes, this will be the
|
|
number of application instances."
|
|
::= {applEntry 11}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
applLastInboundActivity OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this application last
|
|
had an inbound association. If the last association
|
|
occurred prior to the last initialization of the network
|
|
subsystem, then this object contains a zero value."
|
|
::= {applEntry 12}
|
|
|
|
applLastOutboundActivity OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this application last
|
|
had an outbound association. If the last association
|
|
occurred prior to the last initialization of the network
|
|
subsystem, then this object contains a zero value."
|
|
::= {applEntry 13}
|
|
|
|
applRejectedInboundAssociations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of inbound associations the application
|
|
entity has rejected, since application initialization."
|
|
::= {applEntry 14}
|
|
|
|
applFailedOutboundAssociations OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number associations where the application entity
|
|
is initiator and association establishment has failed,
|
|
since application initialization."
|
|
::= {applEntry 15}
|
|
|
|
|
|
-- The assocTable augments the information in the applTable
|
|
-- with information about associations. Note that two levels
|
|
-- of compliance are specified below, depending on whether
|
|
-- association monitoring is mandated.
|
|
|
|
|
|
|
|
|
|
|
|
assocTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AssocEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table holding a set of all active application
|
|
associations."
|
|
::= {application 2}
|
|
|
|
assocEntry OBJECT-TYPE
|
|
SYNTAX AssocEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry associated with an association for a network
|
|
service application."
|
|
INDEX {applIndex, assocIndex}
|
|
::= {assocTable 1}
|
|
|
|
AssocEntry ::= SEQUENCE {
|
|
assocIndex
|
|
INTEGER,
|
|
assocRemoteApplication
|
|
DisplayString,
|
|
assocApplicationProtocol
|
|
OBJECT IDENTIFIER,
|
|
assocApplicationType
|
|
INTEGER,
|
|
assocDuration
|
|
TimeStamp
|
|
}
|
|
|
|
assocIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to uniquely identify each association for a network
|
|
service application."
|
|
::= {assocEntry 1}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
assocRemoteApplication OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the system running remote network service
|
|
application. For an IP-based application this should be
|
|
either a domain name or IP address. For an OSI application
|
|
it should be the string encoded distinguished name of the
|
|
managed object. For X.400(84) MTAs which do not have a
|
|
Distinguished Name, the RFC1327 [6] syntax
|
|
'mta in globalid' should be used."
|
|
::= {assocEntry 2}
|
|
|
|
assocApplicationProtocol OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identification of the protocol being used for the
|
|
application. For an OSI Application, this will be the
|
|
Application Context. For Internet applications, the IANA
|
|
maintains a registry of the OIDs which correspond to
|
|
well-known applications. If the application protocol is
|
|
not listed in the registry, an OID value of the form
|
|
{applTCPProtoID port} or {applUDProtoID port} are used for
|
|
TCP-based and UDP-based protocols, respectively. In either
|
|
case 'port' corresponds to the primary port number being
|
|
used by the protocol."
|
|
::= {assocEntry 3}
|
|
|
|
assocApplicationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ua-initiator(1),
|
|
ua-responder(2),
|
|
peer-initiator(3),
|
|
peer-responder(4)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates whether the remote application is some type of
|
|
client making use of this network service (e.g. a User Agent)
|
|
or a server acting as a peer. Also indicated is whether the
|
|
remote end initiated an incoming connection to the network
|
|
service or responded to an outgoing connection made by the
|
|
local application."
|
|
::= {assocEntry 4}
|
|
|
|
|
|
|
|
|
|
assocDuration OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this association was
|
|
started. If this association started prior to the last
|
|
initialization of the network subsystem, then this
|
|
object contains a zero value."
|
|
::= {assocEntry 5}
|
|
|
|
|
|
-- Conformance information
|
|
|
|
applConformance OBJECT IDENTIFIER ::= {application 3}
|
|
|
|
applGroups OBJECT IDENTIFIER ::= {applConformance 1}
|
|
applCompliances OBJECT IDENTIFIER ::= {applConformance 2}
|
|
|
|
|
|
-- Compliance statements
|
|
|
|
applCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMPv2 entities
|
|
which implement the Network Services Monitoring MIB
|
|
for basic monitoring of network service applications."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {applGroup}
|
|
::= {applCompliances 1}
|
|
|
|
assocCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMPv2 entities which
|
|
implement the Network Services Monitoring MIB for basic
|
|
monitoring of network service applications and their
|
|
associations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {applGroup, assocGroup}
|
|
::= {applCompliances 2}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- Units of conformance
|
|
|
|
applGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
applName, applVersion, applUptime, applOperStatus,
|
|
applLastChange, applInboundAssociations,
|
|
applOutboundAssociations, applAccumulatedInboundAssociations,
|
|
applAccumulatedOutboundAssociations, applLastInboundActivity,
|
|
applLastOutboundActivity, applRejectedInboundAssociations,
|
|
applFailedOutboundAssociations}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing basic monitoring of
|
|
network service applications."
|
|
::= {applGroups 1}
|
|
|
|
assocGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
assocRemoteApplication, assocApplicationProtocol,
|
|
assocApplicationType, assocDuration}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing basic monitoring of
|
|
network service applications' associations."
|
|
::= {applGroups 2}
|
|
|
|
|
|
-- OIDs of the form {applTCPProtoID port} are intended to be used
|
|
-- for TCP-based protocols that don't have OIDs assigned by other
|
|
-- means. {applUDPProtoID port} serves the same purpose for
|
|
-- UDP-based protocols. In either case 'port' corresponds to
|
|
-- the primary port number being used by the protocol. For example,
|
|
-- assuming no other OID is assigned for SMTP, an OID of
|
|
-- {applTCPProtoID 25} could be used, since SMTP is a TCP-based
|
|
-- protocol that uses port 25 as its primary port.
|
|
|
|
applTCPProtoID OBJECT IDENTIFIER ::= {application 4}
|
|
applUDPProtoID OBJECT IDENTIFIER ::= {application 5}
|
|
|
|
END
|