708 lines
32 KiB
Plaintext
708 lines
32 KiB
Plaintext
-- Changes for RFC 1461 (Multiprotocol Interconnect over X.25)
|
|
-- ** No changes needed. **
|
|
-- dperkins@scruznet.com
|
|
|
|
MIOX25-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter,
|
|
TimeTicks
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString, transmission,
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
InstancePointer
|
|
FROM RFC1316-MIB
|
|
X121Address
|
|
FROM RFC1382-MIB
|
|
PositiveInteger
|
|
FROM RFC1381-MIB;
|
|
|
|
-- IP over X.25 MIB
|
|
|
|
miox OBJECT IDENTIFIER ::= { transmission 38 }
|
|
|
|
mioxPle OBJECT IDENTIFIER ::= { miox 1 }
|
|
mioxPeer OBJECT IDENTIFIER ::= { miox 2 }
|
|
|
|
-- ###########################################################
|
|
-- Ple Table
|
|
-- ###########################################################
|
|
|
|
-- Systems that implement RFC 1356 must also implement
|
|
-- all objects in this group.
|
|
|
|
mioxPleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MioxPleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information relative to
|
|
an interface to an X.25 Packet Level Entity
|
|
(PLE)."
|
|
::= { mioxPle 1 }
|
|
|
|
mioxPleEntry OBJECT-TYPE
|
|
SYNTAX MioxPleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"These objects manage the encapsulation of
|
|
other protocols within X.25."
|
|
INDEX { ifIndex }
|
|
::= { mioxPleTable 1 }
|
|
|
|
MioxPleEntry ::= SEQUENCE {
|
|
mioxPleMaxCircuits
|
|
INTEGER,
|
|
mioxPleRefusedConnections
|
|
Counter,
|
|
mioxPleEnAddrToX121LkupFlrs
|
|
Counter,
|
|
mioxPleLastFailedEnAddr
|
|
OCTET STRING,
|
|
mioxPleEnAddrToX121LkupFlrTime
|
|
TimeTicks,
|
|
mioxPleX121ToEnAddrLkupFlrs
|
|
Counter,
|
|
mioxPleLastFailedX121Address
|
|
X121Address,
|
|
mioxPleX121ToEnAddrLkupFlrTime
|
|
TimeTicks,
|
|
mioxPleQbitFailures
|
|
Counter,
|
|
mioxPleQbitFailureRemoteAddress
|
|
X121Address,
|
|
mioxPleQbitFailureTime
|
|
TimeTicks,
|
|
mioxPleMinimumOpenTimer
|
|
PositiveInteger,
|
|
mioxPleInactivityTimer
|
|
PositiveInteger,
|
|
mioxPleHoldDownTimer
|
|
PositiveInteger,
|
|
mioxPleCollisionRetryTimer
|
|
PositiveInteger,
|
|
mioxPleDefaultPeerId
|
|
InstancePointer
|
|
}
|
|
|
|
mioxPleMaxCircuits OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of X.25 circuits that
|
|
can be open at one time for this interface.
|
|
A value of zero indicates the interface will
|
|
not allow any additional circuits (as it may
|
|
soon be shutdown). A value of 2147483647
|
|
allows an unlimited number of circuits."
|
|
::= { mioxPleEntry 1 }
|
|
|
|
mioxPleRefusedConnections OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of X.25 calls from a remote
|
|
systems to this system that were cleared by
|
|
this system. The interface instance should
|
|
identify the X.25 interface the call came in
|
|
on."
|
|
::= { mioxPleEntry 2 }
|
|
|
|
mioxPleEnAddrToX121LkupFlrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times a translation from an
|
|
Encapsulated Address to an X.121 address
|
|
failed to find a corresponding X.121
|
|
address. Encapsulated addresses can be
|
|
looked up in the mioxPeerTable or translated
|
|
via an algorithm as for the DDN. Addresses
|
|
that are successfully recognized do not
|
|
increment this counter. Addresses that are
|
|
not recognized (reflecting an abnormal
|
|
packet delivery condition) increment this
|
|
counter.
|
|
|
|
If an address translation fails, it may be
|
|
difficult to determine which PLE entry
|
|
should count the failure. In such cases the
|
|
first likely entry in this table should be
|
|
selected. Agents should record the failure
|
|
even if they are unsure which PLE should be
|
|
associated with the failure."
|
|
::= { mioxPleEntry 3 }
|
|
|
|
mioxPleLastFailedEnAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(2..128))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last Encapsulated address that failed
|
|
to find a corresponding X.121 address and
|
|
caused mioxPleEnAddrToX121LkupFlrs to be
|
|
incremented. The first octet of this object
|
|
contains the encapsulation type, the
|
|
remaining octets contain the address of that
|
|
type that failed. Thus for an IP address,
|
|
the length will be five octets, the first
|
|
octet will contain 204 (hex CC), and the
|
|
last four octets will contain the IP
|
|
address. For a snap encapsulation, the
|
|
first byte would be 128 (hex 80) and the
|
|
rest of the octet string would have the snap
|
|
header."
|
|
::= { mioxPleEntry 4 }
|
|
|
|
mioxPleEnAddrToX121LkupFlrTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The most recent value of sysUpTime when the
|
|
translation from an Encapsulated Address to
|
|
X.121 address failed to find a corresponding
|
|
X.121 address."
|
|
::= { mioxPleEntry 5 }
|
|
|
|
mioxPleX121ToEnAddrLkupFlrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the translation from an
|
|
X.121 address to an Encapsulated Address
|
|
failed to find a corresponding Encapsulated
|
|
Address. Addresses successfully recognized
|
|
by an algorithm do not increment this
|
|
counter. This counter reflects the number
|
|
of times call acceptance encountered the
|
|
abnormal condition of not recognizing the
|
|
peer."
|
|
::= { mioxPleEntry 6 }
|
|
|
|
mioxPleLastFailedX121Address OBJECT-TYPE
|
|
SYNTAX X121Address
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last X.121 address that caused
|
|
mioxPleX121ToEnAddrLkupFlrs to increase."
|
|
::= { mioxPleEntry 7 }
|
|
|
|
mioxPleX121ToEnAddrLkupFlrTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The most recent value of sysUpTime when the
|
|
translation from an X.121 address to an
|
|
Encapsulated Address failed to find a
|
|
corresponding Encapsulated Address."
|
|
::= { mioxPleEntry 8 }
|
|
|
|
mioxPleQbitFailures OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times a connection was closed
|
|
because of a Q-bit failure."
|
|
::= { mioxPleEntry 9 }
|
|
|
|
mioxPleQbitFailureRemoteAddress OBJECT-TYPE
|
|
SYNTAX X121Address
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The remote address of the most recent
|
|
(last) connection that was closed because of
|
|
a Q-bit failure."
|
|
::= { mioxPleEntry 10 }
|
|
|
|
mioxPleQbitFailureTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The most recent value of sysUpTime when a
|
|
connection was closed because of a Q-bit
|
|
failure. This will also be the last time
|
|
that mioxPleQbitFailures was incremented."
|
|
::= { mioxPleEntry 11 }
|
|
|
|
mioxPleMinimumOpenTimer OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The minimum time in milliseconds this
|
|
interface will keep a connection open before
|
|
allowing it to be closed. A value of zero
|
|
indicates no timer."
|
|
DEFVAL { 0 }
|
|
::= { mioxPleEntry 12 }
|
|
|
|
mioxPleInactivityTimer OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time time in milliseconds
|
|
this interface will keep an idle connection
|
|
open before closing it. A value of
|
|
2147483647 indicates no timer."
|
|
DEFVAL { 10000 }
|
|
::= { mioxPleEntry 13 }
|
|
|
|
mioxPleHoldDownTimer OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hold down timer in milliseconds. This
|
|
is the minimum amount of time to wait before
|
|
trying another call to a host that was
|
|
previously unsuccessful. A value of
|
|
2147483647 indicates the host will not be
|
|
retried."
|
|
DEFVAL { 0 }
|
|
::= { mioxPleEntry 14 }
|
|
|
|
mioxPleCollisionRetryTimer OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Collision Retry Timer in milliseconds.
|
|
The time to delay between call attempts when
|
|
the maximum number of circuits is exceeded
|
|
in a call attempt."
|
|
DEFVAL { 0 }
|
|
::= { mioxPleEntry 15 }
|
|
|
|
mioxPleDefaultPeerId OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This identifies the instance of the index
|
|
in the mioxPeerTable for the default
|
|
parameters to use with this interface.
|
|
|
|
The entry identified by this object may have
|
|
a zero length Encapsulation address and a
|
|
zero length X.121 address.
|
|
|
|
These default parameters are used with
|
|
connections to hosts that do not have
|
|
entries in the mioxPeerTable. Such
|
|
connections occur when using ddn-x25 IP-X.25
|
|
address mapping or when accepting
|
|
connections from other hosts not in the
|
|
mioxPeerTable.
|
|
|
|
The mioxPeerEncTable entry with the same
|
|
index as the mioxPeerTable entry specifies
|
|
the call encapsulation types this PLE will
|
|
accept for peers not in the mioxPeerTable.
|
|
If the mioxPeerEncTable doesn't contain any
|
|
entries, this PLE will not accept calls from
|
|
entries not in the mioxPeerTable."
|
|
::= { mioxPleEntry 16 }
|
|
|
|
-- ###########################################################
|
|
-- Peer Table
|
|
-- ###########################################################
|
|
|
|
|
|
-- Systems that implement RFC 1356 must also implement
|
|
-- all objects in this group.
|
|
|
|
mioxPeerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MioxPeerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains information about the
|
|
possible peers this machine may exchange
|
|
packets with."
|
|
::= { mioxPeer 1 }
|
|
|
|
mioxPeerEntry OBJECT-TYPE
|
|
SYNTAX MioxPeerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Per peer information."
|
|
INDEX { mioxPeerIndex }
|
|
::= { mioxPeerTable 1 }
|
|
|
|
MioxPeerEntry ::= SEQUENCE {
|
|
mioxPeerIndex
|
|
PositiveInteger,
|
|
mioxPeerStatus
|
|
INTEGER,
|
|
mioxPeerMaxCircuits
|
|
PositiveInteger,
|
|
mioxPeerIfIndex
|
|
PositiveInteger,
|
|
mioxPeerConnectSeconds
|
|
Counter,
|
|
mioxPeerX25CallParamId
|
|
InstancePointer,
|
|
mioxPeerEnAddr
|
|
OCTET STRING,
|
|
mioxPeerX121Address
|
|
X121Address,
|
|
mioxPeerX25CircuitId
|
|
InstancePointer,
|
|
mioxPeerDescr
|
|
DisplayString
|
|
}
|
|
|
|
mioxPeerIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index value that distinguished one entry
|
|
from another. This index is independent of
|
|
any other index."
|
|
::= { mioxPeerEntry 1 }
|
|
|
|
-- Systems can claim conformance with this MIB without
|
|
-- implementing sets to mioxPeerStatus with a value of
|
|
-- clearCall or makeCall.
|
|
-- All other defined values must be accepted.
|
|
-- Implementors should realize that allowing these values
|
|
-- provides richer management, and implementations
|
|
-- are encouraged to accept these values.
|
|
|
|
mioxPeerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid (1),
|
|
createRequest (2),
|
|
underCreation (3),
|
|
invalid (4),
|
|
clearCall (5),
|
|
makeCall (6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This reports the status of a peer entry.
|
|
A value of valid indicates a normal entry
|
|
that is in use by the agent. A value of
|
|
underCreation indicates a newly created
|
|
entry which isn't yet in use because the
|
|
creating management station is still setting
|
|
values.
|
|
|
|
The value of invalid indicates the entry is
|
|
no longer in use and the agent is free to
|
|
delete the entry at any time. A management
|
|
station is also free to use an entry in the
|
|
invalid state.
|
|
|
|
Entries are created by setting a value of
|
|
createRequest. Only non-existent or invalid
|
|
entries can be set to createRequest. Upon
|
|
receiving a valid createRequest, the agent
|
|
will create an entry in the underCreation
|
|
state. This object can not be set to a
|
|
value of underCreation directly, entries can
|
|
only be created by setting a value of
|
|
createRequest. Entries that exist in other
|
|
than the invalid state can not be set to
|
|
createRequest.
|
|
|
|
Entries with a value of underCreation are
|
|
not used by the system and the management
|
|
station can change the values of other
|
|
objects in the table entry. Management
|
|
stations should also remember to configure
|
|
values in the mioxPeerEncTable with the same
|
|
peer index value as this peer entry.
|
|
|
|
An entry in the underCreation state can be
|
|
set to valid or invalid. Entries in the
|
|
underCreation state will stay in that state
|
|
until 1) the agent times them out, 2) they
|
|
are set to valid, 3) they are set to
|
|
invalid. If an agent notices an entry has
|
|
been in the underCreation state for an
|
|
abnormally long time, it may decide the
|
|
management station has failed and invalidate
|
|
the entry. A prudent agent will understand
|
|
that the management station may need to wait
|
|
for human input and will allow for that
|
|
possibility in its determination of this
|
|
abnormally long period.
|
|
|
|
Once a management station has completed all
|
|
fields of an entry, it will set a value of
|
|
valid. This causes the entry to be
|
|
activated.
|
|
|
|
Entries in the valid state may also be set
|
|
to makeCall or clearCall to make or clear
|
|
X.25 calls to the peer. After such a set
|
|
request the entry will still be in the valid
|
|
state. Setting a value of makeCall causes
|
|
the agent to initiate an X.25 call request
|
|
to the peer specified by the entry. Setting
|
|
a value of clearCall causes the agent to
|
|
initiate clearing one X.25 call present to
|
|
the peer. Each set request will initiate
|
|
another call or clear request (up to the
|
|
maximum allowed); this means that management
|
|
stations that fail to get a response to a
|
|
set request should query to see if a call
|
|
was in fact placed or cleared before
|
|
retrying the request. Entries not in the
|
|
valid state can not be set to makeCall or
|
|
clearCall.
|
|
|
|
The values of makeCall and clearCall provide
|
|
for circuit control on devices which perform
|
|
Ethernet Bridging using static circuit
|
|
assignment without address recognition;
|
|
other devices which dynamically place calls
|
|
based on destination addresses may reject
|
|
such requests.
|
|
|
|
An agent that (re)creates a new entry
|
|
because of a set with createRequest, should
|
|
also (re)create a mioxPeerEncTable entry
|
|
with a mioxPeerEncIndex of 1, and a
|
|
mioxPeerEncType of 204 (hex CC)."
|
|
::= { mioxPeerEntry 2 }
|
|
|
|
mioxPeerMaxCircuits OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of X.25 circuits allowed
|
|
to this peer."
|
|
DEFVAL { 1 }
|
|
::= { mioxPeerEntry 3 }
|
|
|
|
mioxPeerIfIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the ifIndex object for the
|
|
interface to X.25 to use to call the peer."
|
|
DEFVAL { 1 }
|
|
::= { mioxPeerEntry 4 }
|
|
|
|
mioxPeerConnectSeconds OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of seconds a call to this peer
|
|
was active. This counter will be
|
|
incremented by one for every second a
|
|
connection to a peer was open. If two calls
|
|
are open at the same time, one second of
|
|
elapsed real time will results in two
|
|
seconds of connect time."
|
|
::= { mioxPeerEntry 5 }
|
|
|
|
mioxPeerX25CallParamId OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The instance of the index object in the
|
|
x25CallParmTable from RFC 1382 for the X.25
|
|
call parameters used to communicate with the
|
|
remote host. The well known value {0 0}
|
|
indicates no call parameters specified."
|
|
DEFVAL { {0 0} }
|
|
::= { mioxPeerEntry 6 }
|
|
|
|
mioxPeerEnAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Encapsulation address of the remote
|
|
host mapped by this table entry. A length
|
|
of zero indicates the remote IP address is
|
|
unknown or unspecified for use as a PLE
|
|
default.
|
|
|
|
The first octet of this object contains the
|
|
encapsulation type, the remaining octets
|
|
contain an address of that type. Thus for
|
|
an IP address, the length will be five
|
|
octets, the first octet will contain 204
|
|
(hex CC), and the last four octets will
|
|
contain the IP address. For a snap
|
|
encapsulation, the first byte would be 128
|
|
(hex 80) and the rest of the octet string
|
|
would have the snap header."
|
|
DEFVAL { ''h }
|
|
::= { mioxPeerEntry 7 }
|
|
|
|
mioxPeerX121Address OBJECT-TYPE
|
|
SYNTAX X121Address
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The X.25 address of the remote host mapped
|
|
by this table entry. A zero length string
|
|
indicates the X.25 address is unspecified
|
|
for use as the PLE default."
|
|
DEFVAL { ''h }
|
|
::= { mioxPeerEntry 8 }
|
|
|
|
-- Systems can claim conformance to this MIB without
|
|
-- implementing sets to mioxPeerX25CircuitId.
|
|
-- However systems that use PVCs with RFC1356
|
|
-- are encouraged to implement sets.
|
|
mioxPeerX25CircuitId OBJECT-TYPE
|
|
SYNTAX InstancePointer
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the instance of the
|
|
index for the X.25 circuit open to the peer
|
|
mapped by this table entry. The well known
|
|
value {0 0} indicates no connection
|
|
currently active. For multiple connections,
|
|
this identifies the index of a multiplexing
|
|
table entry for the connections. This can
|
|
only be written to configure use of PVCs
|
|
which means the identified circuit table
|
|
entry for a write must be a PVC."
|
|
DEFVAL { {0 0} }
|
|
::= { mioxPeerEntry 9 }
|
|
|
|
mioxPeerDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns any identification
|
|
information about the peer. An agent may
|
|
supply the comment information found in the
|
|
configuration file entry for this peer. A
|
|
zero length string indicates no information
|
|
available."
|
|
DEFVAL { ''h }
|
|
::= { mioxPeerEntry 10 }
|
|
|
|
-- ###########################################################
|
|
-- Peer Encapsulation Table
|
|
-- ###########################################################
|
|
|
|
mioxPeerEncTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MioxPeerEncEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the list of
|
|
encapsulations used to communicate with a
|
|
peer. This table has two indexes, the first
|
|
identifies the peer, the second
|
|
distinguishes encapsulation types.
|
|
|
|
The first index identifies the corresponding
|
|
entry in the mioxPeerTable. The second
|
|
index gives the priority of the different
|
|
encapsulations.
|
|
|
|
The encapsulation types are ordered in
|
|
priority order. For calling a peer, the
|
|
first entry (mioxPeerEncIndex of 1) is tried
|
|
first. If the call doesn't succeed because
|
|
the remote host clears the call due to
|
|
incompatible call user data, the next entry
|
|
in the list is tried. Each entry is tried
|
|
until the list is exhausted.
|
|
|
|
For answering a call, the encapsulation type
|
|
requested by the peer must be found the list
|
|
or the call will be refused. If there are
|
|
no entries in this table for a peer, all
|
|
call requests from the peer will be refused.
|
|
|
|
Objects in this table can only be set when
|
|
the mioxPeerStatus object with the same
|
|
index has a value of underCreation. When
|
|
that status object is set to invalid and
|
|
deleted, the entry in this table with that
|
|
peer index must also be deleted."
|
|
::= { mioxPeer 2 }
|
|
|
|
mioxPeerEncEntry OBJECT-TYPE
|
|
SYNTAX MioxPeerEncEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Per connection information."
|
|
INDEX { mioxPeerIndex, mioxPeerEncIndex}
|
|
::= { mioxPeerEncTable 1 }
|
|
|
|
MioxPeerEncEntry ::= SEQUENCE {
|
|
mioxPeerEncIndex
|
|
PositiveInteger,
|
|
mioxPeerEncType
|
|
INTEGER
|
|
}
|
|
|
|
mioxPeerEncIndex OBJECT-TYPE
|
|
SYNTAX PositiveInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second index in the table which
|
|
distinguishes different encapsulation
|
|
types."
|
|
::= { mioxPeerEncEntry 1 }
|
|
|
|
mioxPeerEncType OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the encapsulation type. For
|
|
IP encapsulation this will have a value of
|
|
204 (hex CC). For SNAP encapsulated
|
|
packets, this will have a value of 128 (hex
|
|
80). For CLNP, ISO 8473, this will have a
|
|
value of 129 (hex 81). For ES-ES, ISO 9542,
|
|
this will have a value of 130 (hex 82). A
|
|
value of 197 (hex C5) identifies the Blacker
|
|
X.25 encapsulation. A value of 0,
|
|
identifies the Null encapsulation.
|
|
|
|
This value can only be written when the
|
|
mioxPeerStatus object with the same
|
|
mioxPeerIndex has a value of underCreation.
|
|
Setting this object to a value of 256
|
|
deletes the entry. When deleting an entry,
|
|
all other entries in the mioxPeerEncTable
|
|
with the same mioxPeerIndex and with an
|
|
mioxPeerEncIndex higher then the deleted
|
|
entry, will all have their mioxPeerEncIndex
|
|
values decremented by one."
|
|
::= { mioxPeerEncEntry 2 }
|
|
|
|
-- ###########################################################
|
|
|
|
END
|