diff --git a/adlists.default b/adlists.default new file mode 100644 index 00000000..dd391357 --- /dev/null +++ b/adlists.default @@ -0,0 +1,8 @@ +https://adaway.org/hosts.txt +http://adblock.gjtech.net/?format=unix-hosts +http://hosts-file.net/ad_servers.txt +http://www.malwaredomainlist.com/hostslist/hosts.txt +http://pgl.yoyo.org/adservers/serverlist.php? +http://someonewhocares.org/hosts/hosts +http://winhelp2002.mvps.org/hosts.txt +http://mirror1.malwaredomains.com/files/justdomains diff --git a/advanced/dnsmasq.conf b/advanced/01-pihole.conf similarity index 98% rename from advanced/dnsmasq.conf rename to advanced/01-pihole.conf index a0b77a5e..339bbf90 100644 --- a/advanced/dnsmasq.conf +++ b/advanced/01-pihole.conf @@ -31,8 +31,8 @@ no-resolv # Add other name servers here, with domain specs if they are for # non-public domains. -server=8.8.8.8 -server=8.8.4.4 +server=@DNS1@ +server=@DNS2@ # If you want dnsmasq to listen for DHCP and DNS requests only on # specified interfaces (and the loopback) give the name of the diff --git a/advanced/dnsmasq.conf.original b/advanced/dnsmasq.conf.original new file mode 100644 index 00000000..598d6390 --- /dev/null +++ b/advanced/dnsmasq.conf.original @@ -0,0 +1,648 @@ +# Configuration file for dnsmasq. +# +# Format is one option per line, legal options are the same +# as the long options legal on the command line. See +# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. + +# Listen on this specific port instead of the standard DNS port +# (53). Setting this to zero completely disables DNS function, +# leaving only DHCP and/or TFTP. +#port=5353 + +# The following two options make you a better netizen, since they +# tell dnsmasq to filter out queries which the public DNS cannot +# answer, and which load the servers (especially the root servers) +# unnecessarily. If you have a dial-on-demand link they also stop +# these requests from bringing up the link unnecessarily. + +# Never forward plain names (without a dot or domain part) +#domain-needed +# Never forward addresses in the non-routed address spaces. +#bogus-priv + +# Uncomment these to enable DNSSEC validation and caching: +# (Requires dnsmasq to be built with DNSSEC option.) +#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf +#dnssec + +# Replies which are not DNSSEC signed may be legitimate, because the domain +# is unsigned, or may be forgeries. Setting this option tells dnsmasq to +# check that an unsigned reply is OK, by finding a secure proof that a DS +# record somewhere between the root and the domain does not exist. +# The cost of setting this is that even queries in unsigned domains will need +# one or more extra DNS queries to verify. +#dnssec-check-unsigned + +# Uncomment this to filter useless windows-originated DNS requests +# which can trigger dial-on-demand links needlessly. +# Note that (amongst other things) this blocks all SRV requests, +# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. +# This option only affects forwarding, SRV records originating for +# dnsmasq (via srv-host= lines) are not suppressed by it. +#filterwin2k + +# Change this line if you want dns to get its upstream servers from +# somewhere other that /etc/resolv.conf +#resolv-file= + +# By default, dnsmasq will send queries to any of the upstream +# servers it knows about and tries to favour servers to are known +# to be up. Uncommenting this forces dnsmasq to try each query +# with each server strictly in the order they appear in +# /etc/resolv.conf +#strict-order + +# If you don't want dnsmasq to read /etc/resolv.conf or any other +# file, getting its servers from this file instead (see below), then +# uncomment this. +#no-resolv + +# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv +# files for changes and re-read them then uncomment this. +#no-poll + +# Add other name servers here, with domain specs if they are for +# non-public domains. +#server=/localnet/192.168.0.1 + +# Example of routing PTR queries to nameservers: this will send all +# address->name queries for 192.168.3/24 to nameserver 10.1.2.3 +#server=/3.168.192.in-addr.arpa/10.1.2.3 + +# Add local-only domains here, queries in these domains are answered +# from /etc/hosts or DHCP only. +#local=/localnet/ + +# Add domains which you want to force to an IP address here. +# The example below send any host in double-click.net to a local +# web-server. +#address=/double-click.net/127.0.0.1 + +# --address (and --server) work with IPv6 addresses too. +#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83 + +# Add the IPs of all queries to yahoo.com, google.com, and their +# subdomains to the vpn and search ipsets: +#ipset=/yahoo.com/google.com/vpn,search + +# You can control how dnsmasq talks to a server: this forces +# queries to 10.1.2.3 to be routed via eth1 +# server=10.1.2.3@eth1 + +# and this sets the source (ie local) address used to talk to +# 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that +# IP on the machine, obviously). +# server=10.1.2.3@192.168.1.1#55 + +# If you want dnsmasq to change uid and gid to something other +# than the default, edit the following lines. +#user= +#group= + +# If you want dnsmasq to listen for DHCP and DNS requests only on +# specified interfaces (and the loopback) give the name of the +# interface (eg eth0) here. +# Repeat the line for more than one interface. +#interface= +# Or you can specify which interface _not_ to listen on +#except-interface= +# Or which to listen on by address (remember to include 127.0.0.1 if +# you use this.) +#listen-address= +# If you want dnsmasq to provide only DNS service on an interface, +# configure it as shown above, and then use the following line to +# disable DHCP and TFTP on it. +#no-dhcp-interface= + +# On systems which support it, dnsmasq binds the wildcard address, +# even when it is listening on only some interfaces. It then discards +# requests that it shouldn't reply to. This has the advantage of +# working even when interfaces come and go and change address. If you +# want dnsmasq to really bind only the interfaces it is listening on, +# uncomment this option. About the only time you may need this is when +# running another nameserver on the same machine. +#bind-interfaces + +# If you don't want dnsmasq to read /etc/hosts, uncomment the +# following line. +#no-hosts +# or if you want it to read another file, as well as /etc/hosts, use +# this. +#addn-hosts=/etc/banner_add_hosts + +# Set this (and domain: see below) if you want to have a domain +# automatically added to simple names in a hosts-file. +#expand-hosts + +# Set the domain for dnsmasq. this is optional, but if it is set, it +# does the following things. +# 1) Allows DHCP hosts to have fully qualified domain names, as long +# as the domain part matches this setting. +# 2) Sets the "domain" DHCP option thereby potentially setting the +# domain of all systems configured by DHCP +# 3) Provides the domain part for "expand-hosts" +#domain=thekelleys.org.uk + +# Set a different domain for a particular subnet +#domain=wireless.thekelleys.org.uk,192.168.2.0/24 + +# Same idea, but range rather then subnet +#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200 + +# Uncomment this to enable the integrated DHCP server, you need +# to supply the range of addresses available for lease and optionally +# a lease time. If you have more than one network, you will need to +# repeat this for each network on which you want to supply DHCP +# service. +#dhcp-range=192.168.0.50,192.168.0.150,12h + +# This is an example of a DHCP range where the netmask is given. This +# is needed for networks we reach the dnsmasq DHCP server via a relay +# agent. If you don't know what a DHCP relay agent is, you probably +# don't need to worry about this. +#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h + +# This is an example of a DHCP range which sets a tag, so that +# some DHCP options may be set only for this network. +#dhcp-range=set:red,192.168.0.50,192.168.0.150 + +# Use this DHCP range only when the tag "green" is set. +#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h + +# Specify a subnet which can't be used for dynamic address allocation, +# is available for hosts with matching --dhcp-host lines. Note that +# dhcp-host declarations will be ignored unless there is a dhcp-range +# of some type for the subnet in question. +# In this case the netmask is implied (it comes from the network +# configuration on the machine running dnsmasq) it is possible to give +# an explicit netmask instead. +#dhcp-range=192.168.0.0,static + +# Enable DHCPv6. Note that the prefix-length does not need to be specified +# and defaults to 64 if missing/ +#dhcp-range=1234::2, 1234::500, 64, 12h + +# Do Router Advertisements, BUT NOT DHCP for this subnet. +#dhcp-range=1234::, ra-only + +# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and +# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack +# hosts. Use the DHCPv4 lease to derive the name, network segment and +# MAC address and assume that the host will also have an +# IPv6 address calculated using the SLAAC alogrithm. +#dhcp-range=1234::, ra-names + +# Do Router Advertisements, BUT NOT DHCP for this subnet. +# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.) +#dhcp-range=1234::, ra-only, 48h + +# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA +# so that clients can use SLAAC addresses as well as DHCP ones. +#dhcp-range=1234::2, 1234::500, slaac + +# Do Router Advertisements and stateless DHCP for this subnet. Clients will +# not get addresses from DHCP, but they will get other configuration information. +# They will use SLAAC for addresses. +#dhcp-range=1234::, ra-stateless + +# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses +# from DHCPv4 leases. +#dhcp-range=1234::, ra-stateless, ra-names + +# Do router advertisements for all subnets where we're doing DHCPv6 +# Unless overriden by ra-stateless, ra-names, et al, the router +# advertisements will have the M and O bits set, so that the clients +# get addresses and configuration from DHCPv6, and the A bit reset, so the +# clients don't use SLAAC addresses. +#enable-ra + +# Supply parameters for specified hosts using DHCP. There are lots +# of valid alternatives, so we will give examples of each. Note that +# IP addresses DO NOT have to be in the range given above, they just +# need to be on the same network. The order of the parameters in these +# do not matter, it's permissible to give name, address and MAC in any +# order. + +# Always allocate the host with Ethernet address 11:22:33:44:55:66 +# The IP address 192.168.0.60 +#dhcp-host=11:22:33:44:55:66,192.168.0.60 + +# Always set the name of the host with hardware address +# 11:22:33:44:55:66 to be "fred" +#dhcp-host=11:22:33:44:55:66,fred + +# Always give the host with Ethernet address 11:22:33:44:55:66 +# the name fred and IP address 192.168.0.60 and lease time 45 minutes +#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m + +# Give a host with Ethernet address 11:22:33:44:55:66 or +# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume +# that these two Ethernet interfaces will never be in use at the same +# time, and give the IP address to the second, even if it is already +# in use by the first. Useful for laptops with wired and wireless +# addresses. +#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60 + +# Give the machine which says its name is "bert" IP address +# 192.168.0.70 and an infinite lease +#dhcp-host=bert,192.168.0.70,infinite + +# Always give the host with client identifier 01:02:02:04 +# the IP address 192.168.0.60 +#dhcp-host=id:01:02:02:04,192.168.0.60 + +# Always give the host with client identifier "marjorie" +# the IP address 192.168.0.60 +#dhcp-host=id:marjorie,192.168.0.60 + +# Enable the address given for "judge" in /etc/hosts +# to be given to a machine presenting the name "judge" when +# it asks for a DHCP lease. +#dhcp-host=judge + +# Never offer DHCP service to a machine whose Ethernet +# address is 11:22:33:44:55:66 +#dhcp-host=11:22:33:44:55:66,ignore + +# Ignore any client-id presented by the machine with Ethernet +# address 11:22:33:44:55:66. This is useful to prevent a machine +# being treated differently when running under different OS's or +# between PXE boot and OS boot. +#dhcp-host=11:22:33:44:55:66,id:* + +# Send extra options which are tagged as "red" to +# the machine with Ethernet address 11:22:33:44:55:66 +#dhcp-host=11:22:33:44:55:66,set:red + +# Send extra options which are tagged as "red" to +# any machine with Ethernet address starting 11:22:33: +#dhcp-host=11:22:33:*:*:*,set:red + +# Give a fixed IPv6 address and name to client with +# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2 +# Note the MAC addresses CANNOT be used to identify DHCPv6 clients. +# Note also the they [] around the IPv6 address are obilgatory. +#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] + +# Ignore any clients which are not specified in dhcp-host lines +# or /etc/ethers. Equivalent to ISC "deny unknown-clients". +# This relies on the special "known" tag which is set when +# a host is matched. +#dhcp-ignore=tag:!known + +# Send extra options which are tagged as "red" to any machine whose +# DHCP vendorclass string includes the substring "Linux" +#dhcp-vendorclass=set:red,Linux + +# Send extra options which are tagged as "red" to any machine one +# of whose DHCP userclass strings includes the substring "accounts" +#dhcp-userclass=set:red,accounts + +# Send extra options which are tagged as "red" to any machine whose +# MAC address matches the pattern. +#dhcp-mac=set:red,00:60:8C:*:*:* + +# If this line is uncommented, dnsmasq will read /etc/ethers and act +# on the ethernet-address/IP pairs found there just as if they had +# been given as --dhcp-host options. Useful if you keep +# MAC-address/host mappings there for other purposes. +#read-ethers + +# Send options to hosts which ask for a DHCP lease. +# See RFC 2132 for details of available options. +# Common options can be given to dnsmasq by name: +# run "dnsmasq --help dhcp" to get a list. +# Note that all the common settings, such as netmask and +# broadcast address, DNS server and default route, are given +# sane defaults by dnsmasq. You very likely will not need +# any dhcp-options. If you use Windows clients and Samba, there +# are some options which are recommended, they are detailed at the +# end of this section. + +# Override the default route supplied by dnsmasq, which assumes the +# router is the same machine as the one running dnsmasq. +#dhcp-option=3,1.2.3.4 + +# Do the same thing, but using the option name +#dhcp-option=option:router,1.2.3.4 + +# Override the default route supplied by dnsmasq and send no default +# route at all. Note that this only works for the options sent by +# default (1, 3, 6, 12, 28) the same line will send a zero-length option +# for all other option numbers. +#dhcp-option=3 + +# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 +#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 + +# Send DHCPv6 option. Note [] around IPv6 addresses. +#dhcp-option=option6:dns-server,[1234::77],[1234::88] + +# Send DHCPv6 option for namservers as the machine running +# dnsmasq and another. +#dhcp-option=option6:dns-server,[::],[1234::88] + +# Ask client to poll for option changes every six hours. (RFC4242) +#dhcp-option=option6:information-refresh-time,6h + +# Set the NTP time server address to be the same machine as +# is running dnsmasq +#dhcp-option=42,0.0.0.0 + +# Set the NIS domain name to "welly" +#dhcp-option=40,welly + +# Set the default time-to-live to 50 +#dhcp-option=23,50 + +# Set the "all subnets are local" flag +#dhcp-option=27,1 + +# Send the etherboot magic flag and then etherboot options (a string). +#dhcp-option=128,e4:45:74:68:00:00 +#dhcp-option=129,NIC=eepro100 + +# Specify an option which will only be sent to the "red" network +# (see dhcp-range for the declaration of the "red" network) +# Note that the tag: part must precede the option: part. +#dhcp-option = tag:red, option:ntp-server, 192.168.1.1 + +# The following DHCP options set up dnsmasq in the same way as is specified +# for the ISC dhcpcd in +# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt +# adapted for a typical dnsmasq installation where the host running +# dnsmasq is also the host running samba. +# you may want to uncomment some or all of them if you use +# Windows clients and Samba. +#dhcp-option=19,0 # option ip-forwarding off +#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) +#dhcp-option=45,0.0.0.0 # netbios datagram distribution server +#dhcp-option=46,8 # netbios node type + +# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave. +#dhcp-option=252,"\n" + +# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client +# probably doesn't support this...... +#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com + +# Send RFC-3442 classless static routes (note the netmask encoding) +#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 + +# Send vendor-class specific options encapsulated in DHCP option 43. +# The meaning of the options is defined by the vendor-class so +# options are sent only when the client supplied vendor class +# matches the class given here. (A substring match is OK, so "MSFT" +# matches "MSFT" and "MSFT 5.0"). This example sets the +# mtftp address to 0.0.0.0 for PXEClients. +#dhcp-option=vendor:PXEClient,1,0.0.0.0 + +# Send microsoft-specific option to tell windows to release the DHCP lease +# when it shuts down. Note the "i" flag, to tell dnsmasq to send the +# value as a four-byte integer - that's what microsoft wants. See +# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true +#dhcp-option=vendor:MSFT,2,1i + +# Send the Encapsulated-vendor-class ID needed by some configurations of +# Etherboot to allow is to recognise the DHCP server. +#dhcp-option=vendor:Etherboot,60,"Etherboot" + +# Send options to PXELinux. Note that we need to send the options even +# though they don't appear in the parameter request list, so we need +# to use dhcp-option-force here. +# See http://syslinux.zytor.com/pxe.php#special for details. +# Magic number - needed before anything else is recognised +#dhcp-option-force=208,f1:00:74:7e +# Configuration file name +#dhcp-option-force=209,configs/common +# Path prefix +#dhcp-option-force=210,/tftpboot/pxelinux/files/ +# Reboot time. (Note 'i' to send 32-bit value) +#dhcp-option-force=211,30i + +# Set the boot filename for netboot/PXE. You will only need +# this is you want to boot machines over the network and you will need +# a TFTP server; either dnsmasq's built in TFTP server or an +# external one. (See below for how to enable the TFTP server.) +#dhcp-boot=pxelinux.0 + +# The same as above, but use custom tftp-server instead machine running dnsmasq +#dhcp-boot=pxelinux,server.name,192.168.1.100 + +# Boot for Etherboot gPXE. The idea is to send two different +# filenames, the first loads gPXE, and the second tells gPXE what to +# load. The dhcp-match sets the gpxe tag for requests from gPXE. +#dhcp-match=set:gpxe,175 # gPXE sends a 175 option. +#dhcp-boot=tag:!gpxe,undionly.kpxe +#dhcp-boot=mybootimage + +# Encapsulated options for Etherboot gPXE. All the options are +# encapsulated within option 175 +#dhcp-option=encap:175, 1, 5b # priority code +#dhcp-option=encap:175, 176, 1b # no-proxydhcp +#dhcp-option=encap:175, 177, string # bus-id +#dhcp-option=encap:175, 189, 1b # BIOS drive code +#dhcp-option=encap:175, 190, user # iSCSI username +#dhcp-option=encap:175, 191, pass # iSCSI password + +# Test for the architecture of a netboot client. PXE clients are +# supposed to send their architecture as option 93. (See RFC 4578) +#dhcp-match=peecees, option:client-arch, 0 #x86-32 +#dhcp-match=itanics, option:client-arch, 2 #IA64 +#dhcp-match=hammers, option:client-arch, 6 #x86-64 +#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64 + +# Do real PXE, rather than just booting a single file, this is an +# alternative to dhcp-boot. +#pxe-prompt="What system shall I netboot?" +# or with timeout before first available action is taken: +#pxe-prompt="Press F8 for menu.", 60 + +# Available boot services. for PXE. +#pxe-service=x86PC, "Boot from local disk" + +# Loads /pxelinux.0 from dnsmasq TFTP server. +#pxe-service=x86PC, "Install Linux", pxelinux + +# Loads /pxelinux.0 from TFTP server at 1.2.3.4. +# Beware this fails on old PXE ROMS. +#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4 + +# Use bootserver on network, found my multicast or broadcast. +#pxe-service=x86PC, "Install windows from RIS server", 1 + +# Use bootserver at a known IP address. +#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4 + +# If you have multicast-FTP available, +# information for that can be passed in a similar way using options 1 +# to 5. See page 19 of +# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf + + +# Enable dnsmasq's built-in TFTP server +#enable-tftp + +# Set the root directory for files available via FTP. +#tftp-root=/var/ftpd + +# Make the TFTP server more secure: with this set, only files owned by +# the user dnsmasq is running as will be send over the net. +#tftp-secure + +# This option stops dnsmasq from negotiating a larger blocksize for TFTP +# transfers. It will slow things down, but may rescue some broken TFTP +# clients. +#tftp-no-blocksize + +# Set the boot file name only when the "red" tag is set. +#dhcp-boot=tag:red,pxelinux.red-net + +# An example of dhcp-boot with an external TFTP server: the name and IP +# address of the server are given after the filename. +# Can fail with old PXE ROMS. Overridden by --pxe-service. +#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3 + +# If there are multiple external tftp servers having a same name +# (using /etc/hosts) then that name can be specified as the +# tftp_servername (the third option to dhcp-boot) and in that +# case dnsmasq resolves this name and returns the resultant IP +# addresses in round robin fasion. This facility can be used to +# load balance the tftp load among a set of servers. +#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name + +# Set the limit on DHCP leases, the default is 150 +#dhcp-lease-max=150 + +# The DHCP server needs somewhere on disk to keep its lease database. +# This defaults to a sane location, but if you want to change it, use +# the line below. +#dhcp-leasefile=/var/lib/misc/dnsmasq.leases + +# Set the DHCP server to authoritative mode. In this mode it will barge in +# and take over the lease for any client which broadcasts on the network, +# whether it has a record of the lease or not. This avoids long timeouts +# when a machine wakes up on a new network. DO NOT enable this if there's +# the slightest chance that you might end up accidentally configuring a DHCP +# server for your campus/company accidentally. The ISC server uses +# the same option, and this URL provides more information: +# http://www.isc.org/files/auth.html +#dhcp-authoritative + +# Run an executable when a DHCP lease is created or destroyed. +# The arguments sent to the script are "add" or "del", +# then the MAC address, the IP address and finally the hostname +# if there is one. +#dhcp-script=/bin/echo + +# Set the cachesize here. +#cache-size=150 + +# If you want to disable negative caching, uncomment this. +#no-negcache + +# Normally responses which come from /etc/hosts and the DHCP lease +# file have Time-To-Live set as zero, which conventionally means +# do not cache further. If you are happy to trade lower load on the +# server for potentially stale date, you can set a time-to-live (in +# seconds) here. +#local-ttl= + +# If you want dnsmasq to detect attempts by Verisign to send queries +# to unregistered .com and .net hosts to its sitefinder service and +# have dnsmasq instead return the correct NXDOMAIN response, uncomment +# this line. You can add similar lines to do the same for other +# registries which have implemented wildcard A records. +#bogus-nxdomain=64.94.110.11 + +# If you want to fix up DNS results from upstream servers, use the +# alias option. This only works for IPv4. +# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 +#alias=1.2.3.4,5.6.7.8 +# and this maps 1.2.3.x to 5.6.7.x +#alias=1.2.3.0,5.6.7.0,255.255.255.0 +# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40 +#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0 + +# Change these lines if you want dnsmasq to serve MX records. + +# Return an MX record named "maildomain.com" with target +# servermachine.com and preference 50 +#mx-host=maildomain.com,servermachine.com,50 + +# Set the default target for MX records created using the localmx option. +#mx-target=servermachine.com + +# Return an MX record pointing to the mx-target for all local +# machines. +#localmx + +# Return an MX record pointing to itself for all local machines. +#selfmx + +# Change the following lines if you want dnsmasq to serve SRV +# records. These are useful if you want to serve ldap requests for +# Active Directory and other windows-originated DNS requests. +# See RFC 2782. +# You may add multiple srv-host lines. +# The fields are ,,,, +# If the domain part if missing from the name (so that is just has the +# service and protocol sections) then the domain given by the domain= +# config option is used. (Note that expand-hosts does not need to be +# set for this to work.) + +# A SRV record sending LDAP for the example.com domain to +# ldapserver.example.com port 389 +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 + +# A SRV record sending LDAP for the example.com domain to +# ldapserver.example.com port 389 (using domain=) +#domain=example.com +#srv-host=_ldap._tcp,ldapserver.example.com,389 + +# Two SRV records for LDAP, each with different priorities +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 +#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 + +# A SRV record indicating that there is no LDAP server for the domain +# example.com +#srv-host=_ldap._tcp.example.com + +# The following line shows how to make dnsmasq serve an arbitrary PTR +# record. This is useful for DNS-SD. (Note that the +# domain-name expansion done for SRV records _does_not +# occur for PTR records.) +#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" + +# Change the following lines to enable dnsmasq to serve TXT records. +# These are used for things like SPF and zeroconf. (Note that the +# domain-name expansion done for SRV records _does_not +# occur for TXT records.) + +#Example SPF. +#txt-record=example.com,"v=spf1 a -all" + +#Example zeroconf +#txt-record=_http._tcp.example.com,name=value,paper=A4 + +# Provide an alias for a "local" DNS name. Note that this _only_ works +# for targets which are names from DHCP or /etc/hosts. Give host +# "bert" another name, bertrand +#cname=bertand,bert + +# For debugging purposes, log each DNS query as it passes through +# dnsmasq. +#log-queries + +# Log lots of extra information about DHCP transactions. +#log-dhcp + +# Include another lot of configuration options. +#conf-file=/etc/dnsmasq.more.conf +#conf-dir=/etc/dnsmasq.d + +# Include all the files in a directory except those ending in .bak +#conf-dir=/etc/dnsmasq.d,.bak + +# Include all files in a directory which end in .conf +#conf-dir=/etc/dnsmasq.d/*.conf diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh index 8569d00b..3992665d 100755 --- a/automated install/basic-install.sh +++ b/automated install/basic-install.sh @@ -90,7 +90,7 @@ spinner() { backupLegacyPihole() { # This function detects and backups the pi-hole v1 files. It will not do anything to the current version files. if [[ -f /etc/dnsmasq.d/adList.conf ]];then - echo "Original Pi-hole detected. Initiating sub space transport" + echo "::: Original Pi-hole detected. Initiating sub space transport" $SUDO mkdir -p /etc/pihole/original/ $SUDO mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d") $SUDO mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d") @@ -134,13 +134,18 @@ chooseInterface() { interfaceCount=$(echo "$availableInterfaces" | wc -l) chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount) chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) - - for desiredInterface in $chooseInterfaceOptions - do + if [[ $? = 0 ]];then + for desiredInterface in $chooseInterfaceOptions + do piholeInterface=$desiredInterface echo "::: Using interface: $piholeInterface" echo ${piholeInterface} > /tmp/piholeINT - done + done + else + echo "::: Cancel selected, exiting...." + exit 1 + fi + } @@ -150,34 +155,40 @@ use4andor6() { options=(IPv4 "Block ads over IPv4" on IPv6 "Block ads over IPv6" off) choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty) - for choice in $choices - do - case $choice in - IPv4 ) useIPv4=true;; - IPv6 ) useIPv6=true;; - esac - done - if [ $useIPv4 ] && [ ! $useIPv6 ]; then - getStaticIPv4Settings - setStaticIPv4 - echo "::: Using IPv4 on $IPv4addr" - echo "::: IPv6 will NOT be used." - fi - if [ ! $useIPv4 ] && [ $useIPv6 ]; then - useIPv6dialog - echo "::: IPv4 will NOT be used." - echo "::: Using IPv6 on $piholeIPv6" - fi - if [ $useIPv4 ] && [ $useIPv6 ]; then - getStaticIPv4Settings - setStaticIPv4 - useIPv6dialog - echo "::: Using IPv4 on $IPv4addr" - echo "::: Using IPv6 on $piholeIPv6" - fi - if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then - echo "::: Cannot continue, neither IPv4 or IPv6 selected" - echo "::: Exiting" + if [[ $? = 0 ]];then + for choice in $choices + do + case $choice in + IPv4 ) useIPv4=true;; + IPv6 ) useIPv6=true;; + esac + done + + if [ $useIPv4 ] && [ ! $useIPv6 ]; then + getStaticIPv4Settings + setStaticIPv4 + echo "::: Using IPv4 on $IPv4addr" + echo "::: IPv6 will NOT be used." + fi + if [ ! $useIPv4 ] && [ $useIPv6 ]; then + useIPv6dialog + echo "::: IPv4 will NOT be used." + echo "::: Using IPv6 on $piholeIPv6" + fi + if [ $useIPv4 ] && [ $useIPv6 ]; then + getStaticIPv4Settings + setStaticIPv4 + useIPv6dialog + echo "::: Using IPv4 on $IPv4addr" + echo "::: Using IPv6 on $piholeIPv6" + fi + if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then + echo "::: Cannot continue, neither IPv4 or IPv6 selected" + echo "::: Exiting" + exit 1 + fi + else + echo "::: Cancel selected. Exiting..." exit 1 fi } @@ -209,11 +220,11 @@ getStaticIPv4Settings() { # Ask for the IPv4 address IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then - echo "Your static IPv4 address: $IPv4addr" + echo "::: Your static IPv4 address: $IPv4addr" # Ask for the gateway IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then - echo "Your static IPv4 gateway: $IPv4gw" + echo "::: Your static IPv4 gateway: $IPv4gw" # Give the user a chance to review their settings before moving on if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct? IP address: $IPv4addr @@ -231,14 +242,14 @@ getStaticIPv4Settings() { else # Cancelling gateway settings window ipSettingsCorrect=False - echo "User canceled." - exit + echo "::: Cancel selected. Exiting..." + exit 1 fi else # Cancelling IPv4 settings window ipSettingsCorrect=False - echo "User canceled." - exit + echo "::: Cancel selected. Exiting..." + exit 1 fi done # End the if statement for DHCP vs. static @@ -247,7 +258,7 @@ getStaticIPv4Settings() { setDHCPCD() { # Append these lines to dhcpcd.conf to enable a static IP - echo "interface $piholeInterface + echo "::: interface $piholeInterface static ip_address=$IPv4addr static routers=$IPv4gw static domain_name_servers=$IPv4gw" | $SUDO tee -a $dhcpcdFile >/dev/null @@ -267,6 +278,62 @@ setStaticIPv4() { fi } +setDNS(){ + DNSChoseCmd=(whiptail --separate-output --radiolist "Select DNS Servers" $r $c 2) + DNSChooseOptions=(Google "Use Google's DNS Servers" on + DynDNS "Use DynDNS's DNS Servers" off) + DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty) + if [[ $? = 0 ]];then + case $DNSchoices in + Google) + echo "::: Using Google DNS servers." + piholeDNS1="8.8.8.8" + piholeDNS2="8.8.4.4" + ;; + DynDNS) + echo "::: Using DynDNS servers." + piholeDNS1="208.67.222.222" + piholeDNS2="208.67.220.220" + ;; + esac + else + echo "::: Cancel selected. Exiting..." + exit 1 + fi +} + +versionCheckDNSmasq(){ + # Check if /etc/dnsmasq.conf is from pihole. If so replace with an original and install new in .d directory + dnsFile1="/etc/dnsmasq.conf" + dnsFile2="/etc/dnsmasq.conf.orig" + dnsSearch="addn-hosts=/etc/pihole/gravity.list" + + # Check if /etc/dnsmasq.conf exists + if [ -d "/etc/dnsmasq.conf" ]; then + # If true, Check dnsmasq.conf for pihole magic + if grep -q $dnsSearch $dnsFile1; then + # If true, Check dnsmasq.conf.orig for pihole magic + if grep -q $dnsSearch $dnsFile2; then + # If true, use advanced/dnsmasq.conf.original + $SUDO mv -f /etc/dnsmasq.conf /etc/dnsmasq.conf.orig + $SUDO cp /etc/.pihole/advanced/dnsmasq.conf.original /etc/dnsmasq.conf + else + # If false, mv original file back + $SUDO mv -f /etc/dnsmasq.conf.orig /etc/dnsmasq.conf + fi + # If false, This is a fresh install + fi + else + # If false, use advanced/dnsmasq.conf.original + $SUDO cp /etc/.pihole/advanced/dnsmasq.conf.original /etc/dnsmasq.conf + fi + + $SUDO cp /etc/.pihole/advanced/01-pihole.conf /etc/dnsmasq.d/01-pihole.conf + $SUDO sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.d/01-pihole.conf + $SUDO sed -i "s/@DNS1@/$piholeDNS1/" /etc/dnsmasq.d/01-pihole.conf + $SUDO sed -i "s/@DNS2@/$piholeDNS2/" /etc/dnsmasq.d/01-pihole.conf +} + installScripts() { # Install the scripts from /etc/.pihole to their various locations $SUDO echo ":::" @@ -285,11 +352,9 @@ installConfigs() { # Install the configs from /etc/.pihole to their various locations $SUDO echo ":::" $SUDO echo -n "::: Installing configs..." - $SUDO mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig + versionCheckDNSmasq $SUDO mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig - $SUDO cp /etc/.pihole/advanced/dnsmasq.conf /etc/dnsmasq.conf $SUDO cp /etc/.pihole/advanced/lighttpd.conf /etc/lighttpd/lighttpd.conf - $SUDO sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.conf $SUDO echo " done." } @@ -438,9 +503,9 @@ installCron() { runGravity() { # Rub gravity.sh to build blacklists $SUDO echo ":::" - $SUDO echo "::: Preparing to run gravity.sh to refresh hosts..." + $SUDO echo "::: Preparing to run gravity.sh to refresh hosts..." if ls /etc/pihole/list* 1> /dev/null 2>&1; then - echo "::: Cleaning up previous install (preserving whitelist/blacklist)" + echo "::: Cleaning up previous install (preserving whitelist/blacklist)" $SUDO rm /etc/pihole/list.* fi #Don't run as SUDO, this was causing issues @@ -495,6 +560,9 @@ chooseInterface # Let the user decide if they want to block ads over IPv4 and/or IPv6 use4andor6 +# Decide what upstream DNS Servers to use +setDNS + # Install and log everything to a file installPihole | tee $tmpLog diff --git a/gravity.sh b/gravity.sh index 5097e050..3004b8a2 100755 --- a/gravity.sh +++ b/gravity.sh @@ -29,6 +29,9 @@ fi piholeIPfile=/tmp/piholeIP piholeIPv6file=/etc/pihole/.useIPv6 +adListFile=/etc/pihole/adlists.list +adListDefault=/etc/pihole/adlists.default + if [[ -f $piholeIPfile ]];then # If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script piholeIP=$(cat $piholeIPfile) @@ -45,18 +48,8 @@ if [[ -f $piholeIPv6file ]];then piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }') fi -# Ad-list sources--one per line in single quotes -# The mahakala source is commented out due to many users having issues with it blocking legitimate domains. -# Uncomment at your own risk -sources=('https://adaway.org/hosts.txt' -'http://adblock.gjtech.net/?format=unix-hosts' -#'http://adblock.mahakala.is/' -'http://hosts-file.net/ad_servers.txt' -'http://www.malwaredomainlist.com/hostslist/hosts.txt' -'http://pgl.yoyo.org/adservers/serverlist.php?' -'http://someonewhocares.org/hosts/hosts' -'http://winhelp2002.mvps.org/hosts.txt' -'http://mirror1.malwaredomains.com/files/justdomains') + + # Variables for various stages of downloading and formatting the list basename=pihole @@ -97,7 +90,26 @@ spinner(){ ########################### # collapse - begin formation of pihole function gravity_collapse() { - echo -n "::: Neutrino emissions detected..." + echo "::: Neutrino emissions detected..." + echo ":::" + #Decide if we're using a custom ad block list, or defaults. + if [ -f $adListFile ]; then + #custom file found, use this instead of default + echo -n "::: Custom adList file detected. Reading..." + sources=() + while read -a line; do + sources+=($line) + done < $adListFile + echo " done!" + else + #no custom file found, use defaults! + echo -n "::: No custom adlist file detected, reading from default file..." + sources=() + while read -a line; do + sources+=($line) + done < $adListDefault + echo " done!" + fi # Create the pihole resource directory if it doesn't exist. Future files will be stored here if [[ -d $piholeDir ]];then @@ -319,7 +331,7 @@ function gravity_reload() { echo " done!" } - +$SUDO cp /etc/.pihole/adlists.default /etc/pihole/adlists.default gravity_collapse gravity_spinup gravity_Schwarzchild diff --git a/version.txt b/version.txt new file mode 100644 index 00000000..7208c218 --- /dev/null +++ b/version.txt @@ -0,0 +1 @@ +2.4 \ No newline at end of file