2d9e759f41
Make sure that check_group actually tests presense of some group
...
It was not much useful actually: e.g. it skipped the fact that warning:regular
highlight group was not defined.
2015-03-01 14:26:27 +03:00
d797a25fa8
Merge pull request #1319 from ZyX-I/zsh-resource
...
Use special function for appending to precmd_functions
2015-02-27 00:41:16 +03:00
76f73687cf
Use special function for appending to precmd_functions
...
This way there appear no duplicates.
2015-02-23 15:59:21 +03:00
ca6797055a
Merge pull request #1317 from ZyX-I/gentoo-tests
...
Add some fixes for testing from ebuild
2015-02-21 20:33:05 +03:00
3bf484de25
Break on self.quitting line
...
This may also cause python-3.2 pdb test to error out.
2015-02-21 19:55:39 +03:00
68b43c59be
Disable pdb PyPy tests completely
...
They currently fail for the reason that does not seem related to powerline
(though this problem did not occur before porting tests to pexpect, so this
should be somewhat related (somewhat: PyPy fails on code `return br'\u%04x'
% ord(c)` which is no a valid Python code (`%` can no longer be used with
`bytes()` obects), the whole situation only means that before using pexpect bug
in PyPy was not hit)).
2015-02-21 19:55:39 +03:00
0058919c2b
Remove blank lines from pdb output
...
It is the problem that causes python-3.2 pdb tests to fail on travis.
2015-02-21 19:55:39 +03:00
9a89d4defa
Do not special-case PyPy+ipython
2015-02-21 19:55:39 +03:00
74e81bf788
Restore the timeout
...
There may be a reason for a test to take 3 minutes long, but there is no reason
for the test to take even half a minute long *without any output*.
2015-02-21 19:55:39 +03:00
678faed4c2
Force destroying child after everything was done
...
Normally this line should not do anything useful.
2015-02-21 19:55:39 +03:00
b7c7d29aa0
Use “non-blocking” read and stop on TIMEOUT and EOF
2015-02-21 19:55:39 +03:00
deee40505d
Do not repeat `if` more times then needed
2015-02-21 19:55:39 +03:00
38a05b34d7
Do not use “which ipython” in echo since it is no longer relevant
2015-02-21 19:55:38 +03:00
6a6991bcb4
Use 3 minutes for timeout
2015-02-21 19:55:38 +03:00
7d98218b64
Do not wait, just .read()
...
.read() without arguments should read until EOF is received.
2015-02-21 19:55:38 +03:00
0a87b558d9
Do not use child.wait(), it hangs
2015-02-21 19:55:38 +03:00
0710f2760f
Open log as binary file for writing
...
Child output is binary.
2015-02-21 16:11:04 +03:00
d5361337c1
Use script to test whether python zsh uses matches $PYTHON
2015-02-21 16:08:50 +03:00
0f86bbf819
In place of running ipython executable run IPython module
...
This should fix the problem with using wrong ipython for tests.
2015-02-21 15:59:10 +03:00
b2ecb8ca84
Do not append PYTHON to *_REPO paths
...
$PYTHON variable is sometimes a full path which makes everything fail. It is
also useless move since directories are destroyed after tests and running two
test.sh scripts in parallel is not supported in any case.
2015-02-21 15:59:10 +03:00
bb6342c12a
Tell tmux correct path to shell to use
2015-02-21 15:59:10 +03:00
d53c780071
Do not use absolute path for tmux socket
...
Absolute path is too long when using tests in ebuild.
2015-02-21 15:59:10 +03:00
1e85f5df15
Disable vterm tests for PyPy completely
2015-02-21 15:59:10 +03:00
22162a9656
Replace screen-based tests with pexpect-based tests
...
Currently works for all tests, but dash ones. Not much of a problem since dash
tests were disabled for being unstable.
2015-02-21 15:59:10 +03:00
8524ee35e7
Ignore stderr from printf and env
...
socat may close pipe before they succeed to write something which results in
env: write error: Broken pipe
(according to my experience leading printf’s always succeeds to write before
socat closes pipe).
2015-02-21 13:56:58 +03:00
838a7c3b15
Fix the case when $0 is a path
...
I.e. something like /home/zyx/.vam/powerline/tests/shell/path/mksh.
2015-02-21 13:46:35 +03:00
e6b3bff50a
Rerun main() only after running finally block
2015-02-21 04:35:56 +03:00
5ecf50b4d8
Use different $HOME
2015-02-21 04:35:56 +03:00
683691931d
Make sure that there is at least one blank line after full log
2015-02-21 02:38:17 +03:00
fb0fba6c6d
Do not modify $PATH and $LD_LIBRARY_PATH unless on travis
2015-02-21 02:38:17 +03:00
e7c381a63f
Make sure USER and HOME variables are defined
2015-02-21 02:38:17 +03:00
be3fd917a9
Limit maximum amount of attempts to set register a
2015-02-21 02:38:16 +03:00
6343ff0d8f
Merge pull request #1316 from ZyX-I/full-non-travis-tests
...
Make it possible to run the whole test suite outside of travis
2015-02-21 00:59:25 +03:00
75c5295a8c
Adjust fish version tests for bot-ci-compiled fish
2015-02-21 00:08:12 +03:00
0a0af212ad
Allow specifying path to libvterm from environment
...
Uses POWERLINE_LIBVTERM environment variable.
2015-02-20 23:48:26 +03:00
8629999379
Make sure that it is possible to use “system” libvterm.so
2015-02-20 23:47:18 +03:00
02b31f36bd
Only run fish tests for development version or for 2.1.2 and higher
...
Currently tests also test Vi key bindings support, but it is not in any release
yet.
2015-02-20 23:37:13 +03:00
b349d6e390
Make sure that fish tests are not run for old fishes
2015-02-20 23:16:01 +03:00
4d09f4fdb0
Do not run Vim tests if Vim is not available, fallback to system Vim
2015-02-20 22:39:50 +03:00
8fff21d77b
Set the default value for POWERLINE_TMUX_EXE
2015-02-20 22:36:39 +03:00
1445b5a655
Merge branch 'update-qtile' into develop
2015-02-20 22:11:06 +03:00
6cad7b0aae
Add information about supported versions to documentation
2015-02-20 22:10:34 +03:00
479e6afb2a
Do not recreate layout if not needed
2015-02-20 22:09:59 +03:00
5ee860ba8a
Rename timeout to update_interval
2015-02-20 16:40:19 +03:00
1742571b63
Use .timer_setup() to setup timer, fix error from cffi markup renderer
...
1. In qtile-0.9.1 .timeout_add() must be run after ._configure(). In qtile-0.8.0
.timer_setup() is not run automatically.
2. New pango markup renderer (qtile-0.9.1) is not accepting unicode() objects,
only str() ones as it converts them to cffi `char *`.
Fixes #1313
2015-02-20 16:39:50 +03:00
86bb1616b4
Use new name and two sides in example configuration in documentation
2015-02-20 16:19:04 +03:00
bf228943ed
Allow it to configure side
2015-02-20 16:15:21 +03:00
eda9d0d607
Move the closing parenthesis to the next line
2015-02-20 16:14:19 +03:00
83e459c5f8
Do not use private classes for qtile, do not rename Powerline class
2015-02-20 16:09:06 +03:00
6c966811af
Update documentation
2015-02-20 16:07:52 +03:00
Foo