Module semantics: declaration instantiation
Files whose name ends in `_.js` are not themselves valid Test262 tests
and should not be interpreted as such by test runners.
---
Because the tests in this patch concern declaration *instantiation*,
care has been taken to avoid asserting binding values following
evaluation. Because a given module's dependencies are evaluated prior to
the module itself, this is only observable in modules which import their
own bindings.
A separate patch dedicated to the evaluation of module code asserts the
behavior of bindings following evaluation.
---
For tests that concern the creation of a module namespace object, this
patch relies on the semantics of the `in` operator. The `in` operator
uses the [[HasProperty]] internal method and avoids testing unrelated
semantics concerning binding resolution. Those semantics should be
explicitly asserted with a separate set of tests dedicated to that
purpose.
---
One test case which is notably missing is error resulting from a cycle
due to an `import` declaration (under the current file naming scheme,
such a test might be named `instn-named-err-circular.js`). Due to the
recursive nature of ModuleDeclarationInstantiation, it is not
technically possible for a circular request to be found in step 12.c.i.
Cycles rely on at least 2 `export` declarations, and because these are
resolved *before* imports, any cycle would trigger failure prior to step
12.c.
---
One aspect of *module* resolution that makes ordering observable is the
fact that resolution can fail in two distinct ways (i.e. with a
SyntaxError or with a ReferenceError). This patch includes tests that
leverage this detail in order to assert that modules are resolved in the
correct sequence.
However, from the perspective of the ECMA-262 specification, the
ordering of *export* (e.g. binding) resolution is not observable. This
is due to restrictions on the grammar, where each export is independent.
When *export* resolution fails, it does so with instances of SyntaxError
alone, precluding the above strategy.
So while ModuleDeclarationInstantiation resolves the exports of the
module's dependencies in the following order:
1. "Indirect" exports, e.g.
- `export { x } from './y.js';`
- `export { x as z } from './y.js';`
- `import { x } from './y.js'; export { x };`
2. "Star" imports
- `import * as ns from './y.js';`
3. "Named" (my word) imports
- `import x from './y.js';`
- `import { x } from './y.js';`
- `import { x as z } from './y.js';`
Intentional failures cannot be used to discern resolution ordering.
2016-03-29 17:50:15 +02:00
|
|
|
// Copyright (C) 2016 the V8 project authors. All rights reserved.
|
|
|
|
// This code is governed by the BSD license found in the LICENSE file.
|
|
|
|
/*---
|
|
|
|
description: >
|
2017-03-01 22:59:53 +01:00
|
|
|
Modules can be visited more than once when resolving bindings through
|
|
|
|
"star" exports as long as the exportName is different each time.
|
Module semantics: declaration instantiation
Files whose name ends in `_.js` are not themselves valid Test262 tests
and should not be interpreted as such by test runners.
---
Because the tests in this patch concern declaration *instantiation*,
care has been taken to avoid asserting binding values following
evaluation. Because a given module's dependencies are evaluated prior to
the module itself, this is only observable in modules which import their
own bindings.
A separate patch dedicated to the evaluation of module code asserts the
behavior of bindings following evaluation.
---
For tests that concern the creation of a module namespace object, this
patch relies on the semantics of the `in` operator. The `in` operator
uses the [[HasProperty]] internal method and avoids testing unrelated
semantics concerning binding resolution. Those semantics should be
explicitly asserted with a separate set of tests dedicated to that
purpose.
---
One test case which is notably missing is error resulting from a cycle
due to an `import` declaration (under the current file naming scheme,
such a test might be named `instn-named-err-circular.js`). Due to the
recursive nature of ModuleDeclarationInstantiation, it is not
technically possible for a circular request to be found in step 12.c.i.
Cycles rely on at least 2 `export` declarations, and because these are
resolved *before* imports, any cycle would trigger failure prior to step
12.c.
---
One aspect of *module* resolution that makes ordering observable is the
fact that resolution can fail in two distinct ways (i.e. with a
SyntaxError or with a ReferenceError). This patch includes tests that
leverage this detail in order to assert that modules are resolved in the
correct sequence.
However, from the perspective of the ECMA-262 specification, the
ordering of *export* (e.g. binding) resolution is not observable. This
is due to restrictions on the grammar, where each export is independent.
When *export* resolution fails, it does so with instances of SyntaxError
alone, precluding the above strategy.
So while ModuleDeclarationInstantiation resolves the exports of the
module's dependencies in the following order:
1. "Indirect" exports, e.g.
- `export { x } from './y.js';`
- `export { x as z } from './y.js';`
- `import { x } from './y.js'; export { x };`
2. "Star" imports
- `import * as ns from './y.js';`
3. "Named" (my word) imports
- `import x from './y.js';`
- `import { x } from './y.js';`
- `import { x as z } from './y.js';`
Intentional failures cannot be used to discern resolution ordering.
2016-03-29 17:50:15 +02:00
|
|
|
esid: sec-moduledeclarationinstantiation
|
|
|
|
info: |
|
|
|
|
[...]
|
|
|
|
12. For each ImportEntry Record in in module.[[ImportEntries]], do
|
|
|
|
a. Let importedModule be ? HostResolveImportedModule(module,
|
|
|
|
in.[[ModuleRequest]]).
|
|
|
|
b. If in.[[ImportName]] is "*", then
|
|
|
|
i. Let namespace be ? GetModuleNamespace(importedModule).
|
|
|
|
ii. Perform ! envRec.CreateImmutableBinding(in.[[LocalName]], true).
|
|
|
|
iii. Call envRec.InitializeBinding(in.[[LocalName]], namespace).
|
|
|
|
[...]
|
|
|
|
|
2017-03-01 22:59:53 +01:00
|
|
|
15.2.1.16.3 ResolveExport( exportName, resolveSet )
|
Module semantics: declaration instantiation
Files whose name ends in `_.js` are not themselves valid Test262 tests
and should not be interpreted as such by test runners.
---
Because the tests in this patch concern declaration *instantiation*,
care has been taken to avoid asserting binding values following
evaluation. Because a given module's dependencies are evaluated prior to
the module itself, this is only observable in modules which import their
own bindings.
A separate patch dedicated to the evaluation of module code asserts the
behavior of bindings following evaluation.
---
For tests that concern the creation of a module namespace object, this
patch relies on the semantics of the `in` operator. The `in` operator
uses the [[HasProperty]] internal method and avoids testing unrelated
semantics concerning binding resolution. Those semantics should be
explicitly asserted with a separate set of tests dedicated to that
purpose.
---
One test case which is notably missing is error resulting from a cycle
due to an `import` declaration (under the current file naming scheme,
such a test might be named `instn-named-err-circular.js`). Due to the
recursive nature of ModuleDeclarationInstantiation, it is not
technically possible for a circular request to be found in step 12.c.i.
Cycles rely on at least 2 `export` declarations, and because these are
resolved *before* imports, any cycle would trigger failure prior to step
12.c.
---
One aspect of *module* resolution that makes ordering observable is the
fact that resolution can fail in two distinct ways (i.e. with a
SyntaxError or with a ReferenceError). This patch includes tests that
leverage this detail in order to assert that modules are resolved in the
correct sequence.
However, from the perspective of the ECMA-262 specification, the
ordering of *export* (e.g. binding) resolution is not observable. This
is due to restrictions on the grammar, where each export is independent.
When *export* resolution fails, it does so with instances of SyntaxError
alone, precluding the above strategy.
So while ModuleDeclarationInstantiation resolves the exports of the
module's dependencies in the following order:
1. "Indirect" exports, e.g.
- `export { x } from './y.js';`
- `export { x as z } from './y.js';`
- `import { x } from './y.js'; export { x };`
2. "Star" imports
- `import * as ns from './y.js';`
3. "Named" (my word) imports
- `import x from './y.js';`
- `import { x } from './y.js';`
- `import { x as z } from './y.js';`
Intentional failures cannot be used to discern resolution ordering.
2016-03-29 17:50:15 +02:00
|
|
|
|
|
|
|
[...]
|
2017-03-01 22:59:53 +01:00
|
|
|
3. Append the Record {[[Module]]: module, [[ExportName]]: exportName} to resolveSet.
|
|
|
|
4. For each ExportEntry Record e in module.[[LocalExportEntries]], do
|
|
|
|
a. If SameValue(exportName, e.[[ExportName]]) is true, then
|
|
|
|
i. Assert: module provides the direct binding for this export.
|
|
|
|
ii. Return Record{[[Module]]: module, [[BindingName]]: e.[[LocalName]]}.
|
|
|
|
5. For each ExportEntry Record e in module.[[IndirectExportEntries]], do
|
|
|
|
a. If SameValue(exportName, e.[[ExportName]]) is true, then
|
|
|
|
i. Assert: module imports a specific binding for this export.
|
|
|
|
ii. Let importedModule be ? HostResolveImportedModule(module, e.[[ModuleRequest]]).
|
|
|
|
iii. Return ? importedModule.ResolveExport(e.[[ImportName]], resolveSet).
|
Module semantics: declaration instantiation
Files whose name ends in `_.js` are not themselves valid Test262 tests
and should not be interpreted as such by test runners.
---
Because the tests in this patch concern declaration *instantiation*,
care has been taken to avoid asserting binding values following
evaluation. Because a given module's dependencies are evaluated prior to
the module itself, this is only observable in modules which import their
own bindings.
A separate patch dedicated to the evaluation of module code asserts the
behavior of bindings following evaluation.
---
For tests that concern the creation of a module namespace object, this
patch relies on the semantics of the `in` operator. The `in` operator
uses the [[HasProperty]] internal method and avoids testing unrelated
semantics concerning binding resolution. Those semantics should be
explicitly asserted with a separate set of tests dedicated to that
purpose.
---
One test case which is notably missing is error resulting from a cycle
due to an `import` declaration (under the current file naming scheme,
such a test might be named `instn-named-err-circular.js`). Due to the
recursive nature of ModuleDeclarationInstantiation, it is not
technically possible for a circular request to be found in step 12.c.i.
Cycles rely on at least 2 `export` declarations, and because these are
resolved *before* imports, any cycle would trigger failure prior to step
12.c.
---
One aspect of *module* resolution that makes ordering observable is the
fact that resolution can fail in two distinct ways (i.e. with a
SyntaxError or with a ReferenceError). This patch includes tests that
leverage this detail in order to assert that modules are resolved in the
correct sequence.
However, from the perspective of the ECMA-262 specification, the
ordering of *export* (e.g. binding) resolution is not observable. This
is due to restrictions on the grammar, where each export is independent.
When *export* resolution fails, it does so with instances of SyntaxError
alone, precluding the above strategy.
So while ModuleDeclarationInstantiation resolves the exports of the
module's dependencies in the following order:
1. "Indirect" exports, e.g.
- `export { x } from './y.js';`
- `export { x as z } from './y.js';`
- `import { x } from './y.js'; export { x };`
2. "Star" imports
- `import * as ns from './y.js';`
3. "Named" (my word) imports
- `import x from './y.js';`
- `import { x } from './y.js';`
- `import { x as z } from './y.js';`
Intentional failures cannot be used to discern resolution ordering.
2016-03-29 17:50:15 +02:00
|
|
|
[...]
|
2017-03-01 22:59:53 +01:00
|
|
|
8. For each ExportEntry Record e in module.[[StarExportEntries]], do
|
|
|
|
a. Let importedModule be ? HostResolveImportedModule(module, e.[[ModuleRequest]]).
|
|
|
|
b. Let resolution be ? importedModule.ResolveExport(exportName, resolveSet).
|
|
|
|
[...]
|
|
|
|
d. If resolution is not null, then
|
|
|
|
i. If starResolution is null, let starResolution be resolution.
|
|
|
|
[...]
|
|
|
|
9. Return starResolution.
|
Module semantics: declaration instantiation
Files whose name ends in `_.js` are not themselves valid Test262 tests
and should not be interpreted as such by test runners.
---
Because the tests in this patch concern declaration *instantiation*,
care has been taken to avoid asserting binding values following
evaluation. Because a given module's dependencies are evaluated prior to
the module itself, this is only observable in modules which import their
own bindings.
A separate patch dedicated to the evaluation of module code asserts the
behavior of bindings following evaluation.
---
For tests that concern the creation of a module namespace object, this
patch relies on the semantics of the `in` operator. The `in` operator
uses the [[HasProperty]] internal method and avoids testing unrelated
semantics concerning binding resolution. Those semantics should be
explicitly asserted with a separate set of tests dedicated to that
purpose.
---
One test case which is notably missing is error resulting from a cycle
due to an `import` declaration (under the current file naming scheme,
such a test might be named `instn-named-err-circular.js`). Due to the
recursive nature of ModuleDeclarationInstantiation, it is not
technically possible for a circular request to be found in step 12.c.i.
Cycles rely on at least 2 `export` declarations, and because these are
resolved *before* imports, any cycle would trigger failure prior to step
12.c.
---
One aspect of *module* resolution that makes ordering observable is the
fact that resolution can fail in two distinct ways (i.e. with a
SyntaxError or with a ReferenceError). This patch includes tests that
leverage this detail in order to assert that modules are resolved in the
correct sequence.
However, from the perspective of the ECMA-262 specification, the
ordering of *export* (e.g. binding) resolution is not observable. This
is due to restrictions on the grammar, where each export is independent.
When *export* resolution fails, it does so with instances of SyntaxError
alone, precluding the above strategy.
So while ModuleDeclarationInstantiation resolves the exports of the
module's dependencies in the following order:
1. "Indirect" exports, e.g.
- `export { x } from './y.js';`
- `export { x as z } from './y.js';`
- `import { x } from './y.js'; export { x };`
2. "Star" imports
- `import * as ns from './y.js';`
3. "Named" (my word) imports
- `import x from './y.js';`
- `import { x } from './y.js';`
- `import { x as z } from './y.js';`
Intentional failures cannot be used to discern resolution ordering.
2016-03-29 17:50:15 +02:00
|
|
|
flags: [module]
|
|
|
|
---*/
|
|
|
|
|
2016-04-22 22:21:55 +02:00
|
|
|
import * as ns from './instn-star-star-cycle-2_FIXTURE.js';
|
2017-03-01 22:59:53 +01:00
|
|
|
|
|
|
|
assert.sameValue(ns.x, 45);
|
|
|
|
assert.sameValue(ns.y, 45);
|