audk/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c

/** @file  PL111Lcd.c

  Copyright (c) 2011-2012, ARM Ltd. All rights reserved.<BR>

  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <Library/IoLib.h>
#include <Library/MemoryAllocationLib.h>

#include <Drivers/PL111Lcd.h>

#include "LcdGraphicsOutputDxe.h"

/**********************************************************************
 *
 *  This file contains all the bits of the PL111 that are
 *  platform independent.
 *
 **********************************************************************/

EFI_STATUS
LcdInitialize (
  IN EFI_PHYSICAL_ADDRESS   VramBaseAddress
  )
{
  // Define start of the VRAM. This never changes for any graphics mode
  MmioWrite32(PL111_REG_LCD_UP_BASE, (UINT32) VramBaseAddress);
  MmioWrite32(PL111_REG_LCD_LP_BASE, 0); // We are not using a double buffer

  // Disable all interrupts from the PL111
  MmioWrite32(PL111_REG_LCD_IMSC, 0);

  return EFI_SUCCESS;
}

EFI_STATUS
LcdSetMode (
  IN UINT32  ModeNumber
  )
{
  EFI_STATUS        Status;
  UINT32            HRes;
  UINT32            HSync;
  UINT32            HBackPorch;
  UINT32            HFrontPorch;
  UINT32            VRes;
  UINT32            VSync;
  UINT32            VBackPorch;
  UINT32            VFrontPorch;
  UINT32            LcdControl;
  LCD_BPP           LcdBpp;

  // Set the video mode timings and other relevant information
  Status = LcdPlatformGetTimings (ModeNumber,
                                  &HRes,&HSync,&HBackPorch,&HFrontPorch,
                                  &VRes,&VSync,&VBackPorch,&VFrontPorch);
  ASSERT_EFI_ERROR (Status);
  if (EFI_ERROR( Status )) {
    return EFI_DEVICE_ERROR;
  }

  Status = LcdPlatformGetBpp (ModeNumber,&LcdBpp);
  ASSERT_EFI_ERROR (Status);
  if (EFI_ERROR( Status )) {
    return EFI_DEVICE_ERROR;
  }

  // Disable the CLCD_LcdEn bit
  LcdControl = MmioRead32( PL111_REG_LCD_CONTROL);
  MmioWrite32(PL111_REG_LCD_CONTROL,  LcdControl & ~1);

  // Set Timings
  MmioWrite32 (PL111_REG_LCD_TIMING_0, HOR_AXIS_PANEL(HBackPorch, HFrontPorch, HSync, HRes));
  MmioWrite32 (PL111_REG_LCD_TIMING_1, VER_AXIS_PANEL(VBackPorch, VFrontPorch, VSync, VRes));
  MmioWrite32 (PL111_REG_LCD_TIMING_2, CLK_SIG_POLARITY(HRes));
  MmioWrite32 (PL111_REG_LCD_TIMING_3, 0);

  // PL111_REG_LCD_CONTROL
  LcdControl = PL111_CTRL_LCD_EN | PL111_CTRL_LCD_BPP(LcdBpp) | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR;
  MmioWrite32(PL111_REG_LCD_CONTROL,  LcdControl);

  // Turn on power to the LCD Panel
  LcdControl |= PL111_CTRL_LCD_PWR;
  MmioWrite32(PL111_REG_LCD_CONTROL,  LcdControl);

  return EFI_SUCCESS;
}

VOID
LcdShutdown (
  VOID
  )
{
  // Nothing to do in terms of hardware.
  // We could switch off the monitor display if required

  //TODO: ImplementMe
}