audk/Omap35xxPkg/Library/DebugAgentTimerLib/DebugAgentTimerLib.c

166 lines
3.8 KiB
C
Raw Normal View History

/** @file
Debug Agent timer lib for OMAP 35xx.
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Library/BaseLib.h>
#include <Library/IoLib.h>
#include <Library/OmapLib.h>
#include <Library/ArmLib.h>
#include <Library/PcdLib.h>
#include <Omap3530/Omap3530.h>
volatile UINT32 gVector;
// Cached registers
volatile UINT32 gTISR;
volatile UINT32 gTCLR;
volatile UINT32 gTLDR;
volatile UINT32 gTCRR;
volatile UINT32 gTIER;
VOID
EnableInterruptSource (
VOID
)
{
UINTN Bank;
UINTN Bit;
// Map vector to FIQ, IRQ is default
MmioWrite32 (INTCPS_ILR (gVector), 1);
Bank = gVector / 32;
Bit = 1UL << (gVector % 32);
MmioWrite32 (INTCPS_MIR_CLEAR(Bank), Bit);
}
VOID
DisableInterruptSource (
VOID
)
{
UINTN Bank;
UINTN Bit;
Bank = gVector / 32;
Bit = 1UL << (gVector % 32);
MmioWrite32 (INTCPS_MIR_SET(Bank), Bit);
}
/**
Setup all the hardware needed for the debug agents timer.
This function is used to set up debug enviroment. It may enable interrupts.
**/
VOID
EFIAPI
DebugAgentTimerIntialize (
VOID
)
{
UINT32 TimerBaseAddress;
UINT32 TimerNumber;
TimerNumber = PcdGet32(PcdOmap35xxDebugAgentTimer);
gVector = InterruptVectorForTimer (TimerNumber);
// Set up the timer registers
TimerBaseAddress = TimerBase (TimerNumber);
gTISR = TimerBaseAddress + GPTIMER_TISR;
gTCLR = TimerBaseAddress + GPTIMER_TCLR;
gTLDR = TimerBaseAddress + GPTIMER_TLDR;
gTCRR = TimerBaseAddress + GPTIMER_TCRR;
gTIER = TimerBaseAddress + GPTIMER_TIER;
if ((TimerNumber < 2) || (TimerNumber > 9)) {
// This code assumes one the General Purpose timers is used
// GPT2 - GPT9
CpuDeadLoop ();
}
// Set source clock for GPT2 - GPT9 to SYS_CLK
MmioOr32 (CM_CLKSEL_PER, 1 << (TimerNumber - 2));
}
/**
Set the period for the debug agent timer. Zero means disable the timer.
@param[in] TimerPeriodMilliseconds Frequency of the debug agent timer.
**/
VOID
EFIAPI
DebugAgentTimerSetPeriod (
IN UINT32 TimerPeriodMilliseconds
)
{
UINT64 TimerCount;
INT32 LoadValue;
if (TimerPeriodMilliseconds == 0) {
// Turn off GPTIMER3
MmioWrite32 (gTCLR, TCLR_ST_OFF);
DisableInterruptSource ();
} else {
// Calculate required timer count
TimerCount = DivU64x32(TimerPeriodMilliseconds * 1000000, PcdGet32(PcdDebugAgentTimerFreqNanoSeconds));
// Set GPTIMER5 Load register
LoadValue = (INT32) -TimerCount;
MmioWrite32 (gTLDR, LoadValue);
MmioWrite32 (gTCRR, LoadValue);
// Enable Overflow interrupt
MmioWrite32 (gTIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE);
// Turn on GPTIMER3, it will reload at overflow
MmioWrite32 (gTCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);
EnableInterruptSource ();
}
}
/**
Perform End Of Interrupt for the debug agent timer. This is called in the
interrupt handler after the interrupt has been processed.
**/
VOID
EFIAPI
DebugAgentTimerEndOfInterrupt (
VOID
)
{
// Clear all timer interrupts
MmioWrite32 (gTISR, TISR_CLEAR_ALL);
// Poll interrupt status bits to ensure clearing
while ((MmioRead32 (gTISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);
MmioWrite32 (INTCPS_CONTROL, INTCPS_CONTROL_NEWFIQAGR);
ArmDataSynchronizationBarrier ();
}