audk/ArmVirtPkg/ArmVirtQemu.dsc

401 lines
15 KiB
Plaintext
Raw Normal View History

#
# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
# Copyright (c) 2014, Linaro Limited. All rights reserved.
# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
################################################################################
#
# Defines Section - statements that will be processed to create a Makefile.
#
################################################################################
[Defines]
PLATFORM_NAME = ArmVirtQemu
PLATFORM_GUID = 37d7e986-f7e9-45c2-8067-e371421a626c
PLATFORM_VERSION = 0.1
DSC_SPECIFICATION = 0x00010005
OUTPUT_DIRECTORY = Build/ArmVirtQemu-$(ARCH)
SUPPORTED_ARCHITECTURES = AARCH64|ARM
BUILD_TARGETS = DEBUG|RELEASE
SKUID_IDENTIFIER = DEFAULT
FLASH_DEFINITION = ArmVirtPkg/ArmVirtQemu.fdf
#
# Defines for default states. These can be changed on the command line.
# -D FLAG=VALUE
#
DEFINE SECURE_BOOT_ENABLE = FALSE
DEFINE PURE_ACPI_BOOT_ENABLE = FALSE
!include ArmVirtPkg/ArmVirt.dsc.inc
[LibraryClasses.AARCH64]
ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64Lib.inf
ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexAEMv8Lib/ArmCortexAEMv8Lib.inf
[LibraryClasses.ARM]
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf
ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA15Lib/ArmCortexA15Lib.inf
[LibraryClasses.common]
# Virtio Support
VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
QemuFwCfgLib|ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.inf
ArmPlatformLib|ArmVirtPkg/Library/ArmVirtPlatformLib/ArmVirtPlatformLib.inf
ArmPlatformSysConfigLib|ArmPlatformPkg/Library/ArmPlatformSysConfigLibNull/ArmPlatformSysConfigLibNull.inf
TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS Based on OvmfPkg commit 79c098b6d25d. Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that ArmVirtPkg is less widely used by non-developers than OvmfPkg. ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from ArmPlatformPkg. About this patch: - DxeServicesLib and SortLib are resolved generally (they have broad client module type lists). - ReportStatusCodeLib is resolved for UEFI_APPLICATION modules. - GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib and PlatformBootManagerLib, and resolved from under MdeModulePkg and ArmVirtPkg, respectively. - QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance. - FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by BootMaintenanceManagerUiLib, which we link into UiApp. - PcdBootManagerMenuFile carries the FILE_GUID of "MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from "MdeModulePkg/MdeModulePkg.dec" points to "MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf", which, according to the commit that introduced it (a382952f8255), only 'provides a very simple UI showing all the boot options recorded by "BootOrder" and user can select any of them to boot'. - Include the new core BDS driver, and include the boot manager application, with the usual main menu entries. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Fixes: https://github.com/tianocore/edk2/issues/83 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
2016-05-05 19:12:09 +02:00
UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
ImageDecoderLib|MdeModulePkg/Library/ImageDecoderLib/ImageDecoderLib.inf
ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS Based on OvmfPkg commit 79c098b6d25d. Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that ArmVirtPkg is less widely used by non-developers than OvmfPkg. ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from ArmPlatformPkg. About this patch: - DxeServicesLib and SortLib are resolved generally (they have broad client module type lists). - ReportStatusCodeLib is resolved for UEFI_APPLICATION modules. - GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib and PlatformBootManagerLib, and resolved from under MdeModulePkg and ArmVirtPkg, respectively. - QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance. - FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by BootMaintenanceManagerUiLib, which we link into UiApp. - PcdBootManagerMenuFile carries the FILE_GUID of "MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from "MdeModulePkg/MdeModulePkg.dec" points to "MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf", which, according to the commit that introduced it (a382952f8255), only 'provides a very simple UI showing all the boot options recorded by "BootOrder" and user can select any of them to boot'. - Include the new core BDS driver, and include the boot manager application, with the usual main menu entries. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Fixes: https://github.com/tianocore/edk2/issues/83 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
2016-05-05 19:12:09 +02:00
PlatformBootManagerLib|ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
QemuBootOrderLib|OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
PciPcdProducerLib|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
[LibraryClasses.common.UEFI_DRIVER]
UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
[LibraryClasses.AARCH64.SEC]
ArmLib|ArmPkg/Library/ArmLib/AArch64/AArch64LibSec.inf
[LibraryClasses.ARM.SEC]
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7LibSec.inf
[BuildOptions]
RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A15 -I$(WORKSPACE)/ArmVirtPkg/Include
GCC:*_*_ARM_PLATFORM_FLAGS == -mcpu=cortex-a15 -I$(WORKSPACE)/ArmVirtPkg/Include
*_*_AARCH64_PLATFORM_FLAGS == -I$(WORKSPACE)/ArmVirtPkg/Include
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
#
################################################################################
[PcdsFeatureFlag.common]
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderPciTranslation|TRUE
gUefiOvmfPkgTokenSpaceGuid.PcdQemuBootOrderMmioTranslation|TRUE
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
# It could be set FALSE to save size.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
# Activate KVM workaround for now.
gArmVirtTokenSpaceGuid.PcdKludgeMapPciMmioAsCached|TRUE
!if $(PURE_ACPI_BOOT_ENABLE) == TRUE
gArmVirtTokenSpaceGuid.PcdPureAcpiBoot|TRUE
!endif
[PcdsFixedAtBuild.common]
gArmPlatformTokenSpaceGuid.PcdCoreCount|1
!if $(ARCH) == AARCH64
gArmTokenSpaceGuid.PcdVFPEnabled|1
!endif
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x4007c000
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
# Size of the region used by UEFI in permanent memory (Reserved 64MB)
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
#
# ARM Pcds
#
gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000
## Trustzone enable (to make the transition from EL3 to EL2 in ArmPlatformPkg/Sec)
gArmTokenSpaceGuid.PcdTrustzoneSupport|FALSE
#
# ARM PrimeCell
#
## PL011 - Serial Terminal
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|38400
## Default Terminal Type
## 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
!if $(TTY_TERMINAL) == TRUE
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
!else
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|1
!endif
#
ArmVirtualizationQemu: ask the hardware for the timer frequency Roughly, there are two ways to "measure ticks" in UEFI: - the SetTimer() boot service, which sets up a one-shot or periodic event callback, and takes the interval length in units of 100ns, - the Stall() boot service, which stalls the caller (but does not yield the CPU) for the interval specified. The interval is taken as a number of microseconds. If the platform in question also follows the PI (Platform Init) specification, then it is recommended to implement the above UEFI services on top of the following DXE Architectural Protocols (described in PI Volume 2): - Timer Architectural Protocol: "Used to set up a periodic timer interrupt using a platform specific timer, and a processor-specific interrupt vector. This protocol enables the use of the SetTimer() Boot Service. [...]" - Metronome Architectural Protocol: "Used to wait for ticks from a known time source in a platform. This protocol may be used to implement a simple version of the Stall() Boot Service. [...]" Edk2 in general, and ArmVirtualizationQemu in particular, follow the above pattern. SetTimer() works correctly. The underlying Timer Architectural Protocol is provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency. Ultimately it boils down to reading the CNTFRQ_EL0 register. The correct behavior of SetTimer() can be observed for example: - in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"), - in the Intel BDS front page countdown ("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c"). However, Stall() doesn't work correctly. The underlying Metronome Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which further delegates the job to the TimerLib library class. That in turn is resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which (finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz". In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas, that's incorect for: - both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in "target-arm/internals.h"), - and KVM (where the host's virtualized timer can tick at 50 MHz, for example). Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as well. The change can be tested with eg. the following callers of Stall(): - the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on Stall(), - the UEFI shell command "stall" also uses Stall(). (Time it with a stopwatch.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 13:01:58 +01:00
# ARM Virtual Architectural Timer -- fetch frequency from QEMU (TCG) or KVM
#
ArmVirtualizationQemu: ask the hardware for the timer frequency Roughly, there are two ways to "measure ticks" in UEFI: - the SetTimer() boot service, which sets up a one-shot or periodic event callback, and takes the interval length in units of 100ns, - the Stall() boot service, which stalls the caller (but does not yield the CPU) for the interval specified. The interval is taken as a number of microseconds. If the platform in question also follows the PI (Platform Init) specification, then it is recommended to implement the above UEFI services on top of the following DXE Architectural Protocols (described in PI Volume 2): - Timer Architectural Protocol: "Used to set up a periodic timer interrupt using a platform specific timer, and a processor-specific interrupt vector. This protocol enables the use of the SetTimer() Boot Service. [...]" - Metronome Architectural Protocol: "Used to wait for ticks from a known time source in a platform. This protocol may be used to implement a simple version of the Stall() Boot Service. [...]" Edk2 in general, and ArmVirtualizationQemu in particular, follow the above pattern. SetTimer() works correctly. The underlying Timer Architectural Protocol is provided by "ArmPkg/Drivers/TimerDxe", and that driver calls the internal function ArmGenericTimerGetTimerFreq() to retrieve the timer frequency. Ultimately it boils down to reading the CNTFRQ_EL0 register. The correct behavior of SetTimer() can be observed for example: - in the grub-efi countdown ("grub-core/kern/arm/efi/init.c"), - in the Intel BDS front page countdown ("IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c"). However, Stall() doesn't work correctly. The underlying Metronome Architectural Protocol is provided by "EmbeddedPkg/MetronomeDxe", which further delegates the job to the TimerLib library class. That in turn is resolved to the "ArmPkg/Library/ArmArchTimerLib" instance, which (finally!) takes the timer frequency from "PcdArmArchTimerFreqInHz". In ArmVirtualizationQemu we currently specify 100MHz for this PCD. Alas, that's incorect for: - both QEMU/TCG (which emulates 62.5MHz, see GTIMER_SCALE in "target-arm/internals.h"), - and KVM (where the host's virtualized timer can tick at 50 MHz, for example). Set the PCD to 0, asking ArmArchTimerLib to interrogate CNTFRQ_EL0 as well. The change can be tested with eg. the following callers of Stall(): - the UEFI Shell's countdown -- before it runs "startup.nsh" -- relies on Stall(), - the UEFI shell command "stall" also uses Stall(). (Time it with a stopwatch.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16692 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 13:01:58 +01:00
gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
# System Memory Base -- fixed at 0x4000_0000
gArmTokenSpaceGuid.PcdSystemMemoryBase|0x40000000
# initial location of the device tree blob passed by QEMU -- base of DRAM
gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x40000000
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS Based on OvmfPkg commit 79c098b6d25d. Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that ArmVirtPkg is less widely used by non-developers than OvmfPkg. ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from ArmPlatformPkg. About this patch: - DxeServicesLib and SortLib are resolved generally (they have broad client module type lists). - ReportStatusCodeLib is resolved for UEFI_APPLICATION modules. - GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib and PlatformBootManagerLib, and resolved from under MdeModulePkg and ArmVirtPkg, respectively. - QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance. - FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by BootMaintenanceManagerUiLib, which we link into UiApp. - PcdBootManagerMenuFile carries the FILE_GUID of "MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from "MdeModulePkg/MdeModulePkg.dec" points to "MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf", which, according to the commit that introduced it (a382952f8255), only 'provides a very simple UI showing all the boot options recorded by "BootOrder" and user can select any of them to boot'. - Include the new core BDS driver, and include the boot manager application, with the usual main menu entries. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Fixes: https://github.com/tianocore/edk2/issues/83 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
2016-05-05 19:12:09 +02:00
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
#
# The maximum physical I/O addressability of the processor, set with
# BuildCpuHob().
#
gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
[PcdsFixedAtBuild.AARCH64]
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|TRUE
# KVM limits it IPA space to 40 bits (1 TB), so there is no need to
# support anything bigger, even if the host hardware does
gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|40
# Clearing BIT0 in this PCD prevents installing a 32-bit SMBIOS entry point,
# if the entry point version is >= 3.0. AARCH64 OSes cannot assume the
# presence of the 32-bit entry point anyway (because many AARCH64 systems
# don't have 32-bit addressable physical RAM), and the additional allocations
# below 4 GB needlessly fragment the memory map. So expose the 64-bit entry
# point only, for entry point versions >= 3.0.
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x2
# ACPI predates the AARCH64 architecture by 5 versions, so
# we only target OSes that support ACPI v5.0 or later
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x20
ArmVirtualizationPkg/VirtFdtDxe: parse "pci-host-ecam-generic" properties In the Linux kernel tree, "Documentation/devicetree/bindings/pci/host-generic-pci.txt" describes the device tree bindings of a Generic PCI host controller. Recent QEMU patches from Alexander Graf implement such a controller on the "virt" machine type of qemu-system-(aarch64|arm): pcie@10000000 { // // (devfn<<8, 0, 0) PCI irq // ---------------- ------- interrupt-map-mask = <0x1800 0x0 0x0 0x7>; // gic irq // (devfn<<8, 0, 0) pin+1 phandle (type, nr, level) // ---------------- ----- -------- ----------------- interrupt-map = < 0x0 0x0 0x0 0x1 0x8001 0x0 0x3 0x4 0x0 0x0 0x0 0x2 0x8001 0x0 0x4 0x4 0x0 0x0 0x0 0x3 0x8001 0x0 0x5 0x4 0x0 0x0 0x0 0x4 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x1 0x8001 0x0 0x4 0x4 0x800 0x0 0x0 0x2 0x8001 0x0 0x5 0x4 0x800 0x0 0x0 0x3 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x4 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x1 0x8001 0x0 0x5 0x4 0x1000 0x0 0x0 0x2 0x8001 0x0 0x6 0x4 0x1000 0x0 0x0 0x3 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x4 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x1 0x8001 0x0 0x6 0x4 0x1800 0x0 0x0 0x2 0x8001 0x0 0x3 0x4 0x1800 0x0 0x0 0x3 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x4 0x8001 0x0 0x5 0x4>; #interrupt-cells = <0x1>; // // child base cpu base // type address address size // --------- -------------- -------------- -------------- ranges = <0x1000000 0x0 0x0 0x0 0x3eff0000 0x0 0x10000 0x2000000 0x0 0x10000000 0x0 0x10000000 0x0 0x2eff0000>; // // PCIe config PCIe config // space base space size // -------------- ------------- reg = <0x0 0x3f000000 0x0 0x1000000>; // // allowed bus numbers; inclusive range // bus-range = <0x0 0xf>; #size-cells = <0x2>; #address-cells = <0x3>; device_type = "pci"; compatible = "pci-host-ecam-generic"; }; Parse those properties of the compatible="pci-host-ecam-generic" node into PCDs that are relevant for PCI enumeration in edk2: - gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress controls MdePkg/Library/BasePciExpressLib, - gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration controls OvmfPkg/AcpiPlatformDxe at this point, - the rest have been introduced earlier in this patchset, and will control PCI range checks and translation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16894 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:02:50 +01:00
[PcdsDynamicDefault.common]
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
## If TRUE, OvmfPkg/AcpiPlatformDxe will not wait for PCI
# enumeration to complete before installing ACPI tables.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|TRUE
# System Memory Size -- 1 MB initially, actual size will be fetched from DT
gArmTokenSpaceGuid.PcdSystemMemorySize|0x00100000
gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
#
# ARM General Interrupt Controller
#
gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
## PL031 RealTimeClock
gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x0
# set PcdPciExpressBaseAddress to MAX_UINT64, which signifies that this
# PCD and PcdPciDisableBusEnumeration above have not been assigned yet
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xFFFFFFFFFFFFFFFF
ArmVirtualizationPkg/VirtFdtDxe: parse "pci-host-ecam-generic" properties In the Linux kernel tree, "Documentation/devicetree/bindings/pci/host-generic-pci.txt" describes the device tree bindings of a Generic PCI host controller. Recent QEMU patches from Alexander Graf implement such a controller on the "virt" machine type of qemu-system-(aarch64|arm): pcie@10000000 { // // (devfn<<8, 0, 0) PCI irq // ---------------- ------- interrupt-map-mask = <0x1800 0x0 0x0 0x7>; // gic irq // (devfn<<8, 0, 0) pin+1 phandle (type, nr, level) // ---------------- ----- -------- ----------------- interrupt-map = < 0x0 0x0 0x0 0x1 0x8001 0x0 0x3 0x4 0x0 0x0 0x0 0x2 0x8001 0x0 0x4 0x4 0x0 0x0 0x0 0x3 0x8001 0x0 0x5 0x4 0x0 0x0 0x0 0x4 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x1 0x8001 0x0 0x4 0x4 0x800 0x0 0x0 0x2 0x8001 0x0 0x5 0x4 0x800 0x0 0x0 0x3 0x8001 0x0 0x6 0x4 0x800 0x0 0x0 0x4 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x1 0x8001 0x0 0x5 0x4 0x1000 0x0 0x0 0x2 0x8001 0x0 0x6 0x4 0x1000 0x0 0x0 0x3 0x8001 0x0 0x3 0x4 0x1000 0x0 0x0 0x4 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x1 0x8001 0x0 0x6 0x4 0x1800 0x0 0x0 0x2 0x8001 0x0 0x3 0x4 0x1800 0x0 0x0 0x3 0x8001 0x0 0x4 0x4 0x1800 0x0 0x0 0x4 0x8001 0x0 0x5 0x4>; #interrupt-cells = <0x1>; // // child base cpu base // type address address size // --------- -------------- -------------- -------------- ranges = <0x1000000 0x0 0x0 0x0 0x3eff0000 0x0 0x10000 0x2000000 0x0 0x10000000 0x0 0x10000000 0x0 0x2eff0000>; // // PCIe config PCIe config // space base space size // -------------- ------------- reg = <0x0 0x3f000000 0x0 0x1000000>; // // allowed bus numbers; inclusive range // bus-range = <0x0 0xf>; #size-cells = <0x2>; #address-cells = <0x3>; device_type = "pci"; compatible = "pci-host-ecam-generic"; }; Parse those properties of the compatible="pci-host-ecam-generic" node into PCDs that are relevant for PCI enumeration in edk2: - gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress controls MdePkg/Library/BasePciExpressLib, - gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration controls OvmfPkg/AcpiPlatformDxe at this point, - the rest have been introduced earlier in this patchset, and will control PCI range checks and translation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16894 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:02:50 +01:00
#
# Set video resolution for boot options and for text setup.
# PlatformDxe can set the former at runtime.
#
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
#
# SMBIOS entry point version
#
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0
gUefiOvmfPkgTokenSpaceGuid.PcdQemuSmbiosValidated|FALSE
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
#
################################################################################
[Components.common]
#
# PEI Phase modules
#
ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
ArmPlatformPkg/PlatformPei/PlatformPeim.inf
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
ArmPkg/Drivers/CpuPei/CpuPei.inf
MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
}
#
# DXE
#
MdeModulePkg/Core/Dxe/DxeMain.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
}
MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
#
# Architectural Protocols
#
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
}
!if $(SECURE_BOOT_ENABLE) == TRUE
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
<LibraryClasses>
NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
}
SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!else
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
!endif
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/ArmVirtPL031FdtClientLib/ArmVirtPL031FdtClientLib.inf
}
EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
}
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
# Platform Driver
#
ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
ArmVirtPkg/HighMemDxe/HighMemDxe.inf
OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
OvmfPkg/VirtioNetDxe/VirtioNet.inf
OvmfPkg/VirtioRngDxe/VirtioRng.inf
#
# FAT filesystem + GPT/MBR partitioning
#
MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
FatPkg/EnhancedFatDxe/Fat.inf
#
# Bds
#
MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
MdeModulePkg/Universal/BdsDxe/BdsDxe.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/BmpImageDecoderLib/BmpImageDecoderLib.inf
}
ArmVirtPkg/ArmVirtQemu: use MdeModulePkg/BDS Based on OvmfPkg commit 79c098b6d25d. Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that ArmVirtPkg is less widely used by non-developers than OvmfPkg. ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from ArmPlatformPkg. About this patch: - DxeServicesLib and SortLib are resolved generally (they have broad client module type lists). - ReportStatusCodeLib is resolved for UEFI_APPLICATION modules. - GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib and PlatformBootManagerLib, and resolved from under MdeModulePkg and ArmVirtPkg, respectively. - QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance. - FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by BootMaintenanceManagerUiLib, which we link into UiApp. - PcdBootManagerMenuFile carries the FILE_GUID of "MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from "MdeModulePkg/MdeModulePkg.dec" points to "MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf", which, according to the commit that introduced it (a382952f8255), only 'provides a very simple UI showing all the boot options recorded by "BootOrder" and user can select any of them to boot'. - Include the new core BDS driver, and include the boot manager application, with the usual main menu entries. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Fixes: https://github.com/tianocore/edk2/issues/83 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
2016-05-05 19:12:09 +02:00
MdeModulePkg/Application/UiApp/UiApp.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
}
#
# SCSI Bus and Disk Driver
#
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
#
# SMBIOS Support
#
MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf {
<LibraryClasses>
NULL|OvmfPkg/Library/SmbiosVersionLib/DetectSmbiosVersionLib.inf
}
OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
#
# PCI support
#
ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
}
OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
OvmfPkg/Virtio10Dxe/Virtio10.inf
#
# Video support
#
OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf {
<LibraryClasses>
BltLib|OptionRomPkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
}
OvmfPkg/PlatformDxe/Platform.inf
#
# USB Support
#
MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: include XHCI driver The "virt" machine type of qemu-system-(arm|aarch64) had no PCIe support prior to qemu commit 4ab29b82 arm: Add PCIe host bridge in virt machine With that commit, the "virt" board acquired the capability to expose an XHCI controller. Using a USB keyboard as example, the command line options were -device nec-usb-xhci -device usb-kbd However, due to a slight XHCI emulation bug in QEMU -- dating back to several years earlier -- edk2's XHCI driver would encounter a failed ASSERT(). This emulation problem has been fixed in QEMU commit aa685789 xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set and now edk2's XHCI driver works well on QEMU's "nec-usb-xhci" device. Let's enable the driver in ArmVirtualizationQemu, as XHCI emulation is reportedly more virtualization-friendly than EHCI, consuming less CPU. (ArmVirtualizationXen is not modified because it includes no USB-related drivers at all.) This patch should not regress existing QEMU command lines (ie. expose the failed ASSERT()) because QEMU's "-device nec-usb-xhci" has never before resulted in USB devices that worked with edk2 firmware builds, hence users have never had a reason to add that option. Now that they learn about XHCI support in ArmVirtualizationQemu by reading this commit message, they (or their packagers) will also know to update qemu to aa685789 or later (in practice that means the upcoming 2.3 release), at least if they want to use '-device nec-usb-xhci' with edk2, for the first time ever. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Alexander Graf <agraf@suse.de> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17053 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:57:06 +01:00
MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
[Components.AARCH64]
#
# ACPI Support
#
MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf {
<LibraryClasses>
NULL|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
}