audk/SourceLevelDebugPkg/Include/TransferProtocol.h

378 lines
14 KiB
C
Raw Normal View History

/** @file
Transfer protocol defintions used by debug agent and host. It is only
intended to be used by Debug related module implementation.
Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __TRANSFER_PROTOCOL_H__
#define __TRANSFER_PROTOCOL_H__
#include "ProcessorContext.h"
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Current revision of transfer protocol
// 0.4: Packet compression and decompression.
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
#define DEBUG_AGENT_REVISION_03 ((0 << 16) | 03)
#define DEBUG_AGENT_REVISION_04 ((0 << 16) | 04)
#define DEBUG_AGENT_REVISION DEBUG_AGENT_REVISION_04
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
#define DEBUG_AGENT_CAPABILITIES 0
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Definitions for the (A)ttach command
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
#define DEBUG_STARTING_SYMBOL_ATTACH (0xFA)
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Definition for starting symbol of a normal debug packet. Choose a non-ASCII to avoid conflict with other serial output.
//
#define DEBUG_STARTING_SYMBOL_NORMAL (0xFE)
//
// Definition for starting symbol of a (C)ompressed debug packet. Choose a non-ASCII to avoid conflict with other serial output.
//
#define DEBUG_STARTING_SYMBOL_COMPRESS (0xFC)
#pragma pack(1)
//
// Definition for debug packet header for debug packets (not including attach command)
//
typedef struct {
UINT8 StartSymbol;
UINT8 Command;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Length; // Length of Debug Packet including header and payload in byte
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
UINT8 SequenceNo;
UINT16 Crc;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
} DEBUG_PACKET_HEADER;
//
// Definition for Command field for debug packets
//
#define DEBUG_COMMAND_REQUEST (0 << 7)
#define DEBUG_COMMAND_RESPONSE (1 << 7)
#define IS_REQUEST(x) (((x)->Command & DEBUG_COMMAND_RESPONSE) == 0)
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// HOST initiated commands
//
#define DEBUG_COMMAND_RESET (DEBUG_COMMAND_REQUEST | 0x00)
#define DEBUG_COMMAND_GO (DEBUG_COMMAND_REQUEST | 0x01)
#define DEBUG_COMMAND_BREAK_CAUSE (DEBUG_COMMAND_REQUEST | 0x02)
#define DEBUG_COMMAND_SET_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x03)
#define DEBUG_COMMAND_CLEAR_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x04)
#define DEBUG_COMMAND_SINGLE_STEPPING (DEBUG_COMMAND_REQUEST | 0x05)
#define DEBUG_COMMAND_SET_SW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x06)
#define DEBUG_COMMAND_READ_MEMORY (DEBUG_COMMAND_REQUEST | 0x07)
#define DEBUG_COMMAND_WRITE_MEMORY (DEBUG_COMMAND_REQUEST | 0x08)
#define DEBUG_COMMAND_READ_IO (DEBUG_COMMAND_REQUEST | 0x09)
#define DEBUG_COMMAND_WRITE_IO (DEBUG_COMMAND_REQUEST | 0x0A)
#define DEBUG_COMMAND_READ_REGISTER (DEBUG_COMMAND_REQUEST | 0x0B)
#define DEBUG_COMMAND_WRITE_REGISTER (DEBUG_COMMAND_REQUEST | 0x0C)
#define DEBUG_COMMAND_READ_ALL_REGISTERS (DEBUG_COMMAND_REQUEST | 0x0D)
#define DEBUG_COMMAND_ARCH_MODE (DEBUG_COMMAND_REQUEST | 0x0E)
#define DEBUG_COMMAND_READ_MSR (DEBUG_COMMAND_REQUEST | 0x0F)
#define DEBUG_COMMAND_WRITE_MSR (DEBUG_COMMAND_REQUEST | 0x10)
#define DEBUG_COMMAND_SET_DEBUG_SETTING (DEBUG_COMMAND_REQUEST | 0x11)
#define DEBUG_COMMAND_GET_REVISION (DEBUG_COMMAND_REQUEST | 0x12)
#define DEBUG_COMMAND_GET_EXCEPTION (DEBUG_COMMAND_REQUEST | 0x13)
#define DEBUG_COMMAND_SET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 0x14)
#define DEBUG_COMMAND_GET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 0x15)
#define DEBUG_COMMAND_DETACH (DEBUG_COMMAND_REQUEST | 0x16)
#define DEBUG_COMMAND_CPUID (DEBUG_COMMAND_REQUEST | 0x17)
#define DEBUG_COMMAND_SEARCH_SIGNATURE (DEBUG_COMMAND_REQUEST | 0x18)
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
#define DEBUG_COMMAND_HALT (DEBUG_COMMAND_REQUEST | 0x19)
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// TARGET initiated commands
//
#define DEBUG_COMMAND_INIT_BREAK (DEBUG_COMMAND_REQUEST | 0x3F)
#define DEBUG_COMMAND_BREAK_POINT (DEBUG_COMMAND_REQUEST | 0x3E)
#define DEBUG_COMMAND_MEMORY_READY (DEBUG_COMMAND_REQUEST | 0x3D)
#define DEBUG_COMMAND_PRINT_MESSAGE (DEBUG_COMMAND_REQUEST | 0x3C)
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
#define DEBUG_COMMAND_ATTACH_BREAK (DEBUG_COMMAND_REQUEST | 0x3B)
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Response commands
//
#define DEBUG_COMMAND_OK (DEBUG_COMMAND_RESPONSE | 0x00)
#define DEBUG_COMMAND_RESEND (DEBUG_COMMAND_RESPONSE | 0x01)
#define DEBUG_COMMAND_ABORT (DEBUG_COMMAND_RESPONSE | 0x02)
//
// The below 2 commands are used when transferring big data (like > ~250 bytes).
// The sequence is:
// HOST TARGET
// Request =>
// <= IN_PROGRESS with partial data
// CONTINUE =>
// (could have multiple IN_PROGRESS and CONTINUE interactions)
// <= OK with the last part of data
// OK (no data as ACK) =>
//
#define DEBUG_COMMAND_IN_PROGRESS (DEBUG_COMMAND_RESPONSE | 0x03)
#define DEBUG_COMMAND_CONTINUE (DEBUG_COMMAND_RESPONSE | 0x04)
//
// The below 2 commands are used to support deferred halt:
// TARGET returns HALT_DEFERRED when it receives a HALT request in inter-active mode.
// TARGET returns HALT_PROCESSED when it receives a GO request and has a pending HALT request.
//
#define DEBUG_COMMAND_HALT_DEFERRED (DEBUG_COMMAND_RESPONSE | 0x05)
#define DEBUG_COMMAND_HALT_PROCESSED (DEBUG_COMMAND_RESPONSE | 0x06)
#define DEBUG_COMMAND_TIMEOUT (DEBUG_COMMAND_RESPONSE | 0x07)
#define DEBUG_COMMAND_NOT_SUPPORTED (DEBUG_COMMAND_RESPONSE | 0x0F)
//
// Definition for data field for debug packets
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
#define DEBUG_DATA_UPPER_LIMIT 0xff // Upper limit for the data size, by the limit of the packet header definition.
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
#define DEBUG_DATA_MAXIMUM_REAL_DATA (DEBUG_DATA_UPPER_LIMIT - sizeof (DEBUG_PACKET_HEADER))
//
// Response data for DEBUG_COMMAND_BREAK_CAUSE
//
typedef struct {
UINT8 Cause;
UINT64 StopAddress;
} DEBUG_DATA_RESPONSE_BREAK_CAUSE;
//
// Break type defintions for DEBUG_DATA_BREAK_CAUSE
//
#define DEBUG_DATA_BREAK_CAUSE_UNKNOWN 0
#define DEBUG_DATA_BREAK_CAUSE_HW_BREAKPOINT 1
#define DEBUG_DATA_BREAK_CAUSE_STEPPING 2
#define DEBUG_DATA_BREAK_CAUSE_SW_BREAKPOINT 3
#define DEBUG_DATA_BREAK_CAUSE_USER_HALT 4
#define DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD 5
#define DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD 6
#define DEBUG_DATA_BREAK_CAUSE_SYSTEM_RESET 7
#define DEBUG_DATA_BREAK_CAUSE_EXCEPTION 8
#define DEBUG_DATA_BREAK_CAUSE_MEMORY_READY 9
//
// Response data for DEBUG_COMMAND_ARCH_MODE, defined as SOFT_DEBUGGER_PROCESSOR_...
//
typedef struct {
UINT8 CpuMode;
} DEBUG_DATA_RESPONSE_ARCH_MODE;
//
// Cpu architecture defintions for DEBUG_DATA_RESPONSE_ARCH_MODE
//
#define DEBUG_DATA_BREAK_CPU_ARCH_IA16 0
#define DEBUG_DATA_BREAK_CPU_ARCH_IA32 1
#define DEBUG_DATA_BREAK_CPU_ARCH_X64 2
typedef struct {
UINT8 Length:2; // Refer to below DEBUG_DATA_BREAKPOINT_LENGTH_XX macros
UINT8 Access:2; // Refer to below DEBUG_DATA_BREAKPOINT_ACCESS_XX macros
UINT8 Index:2; // Index of debug register
UINT8 Reserved:2;
} DEBUG_DATA_BREAKPOINT_TYPE;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
#define DEBUG_DATA_BREAKPOINT_MEMORY_ACCESS (0x3)
#define DEBUG_DATA_BREAKPOINT_IO_ACCESS (0x2)
#define DEBUG_DATA_BREAKPOINT_MEMORY_WRITE (0x1)
#define DEBUG_DATA_BREAKPOINT_MEMORY_EXECUTE (0x0)
#define DEBUG_DATA_BREAKPOINT_LENGTH_32 (0x3)
#define DEBUG_DATA_BREAKPOINT_LENGTH_64 (0x2)
#define DEBUG_DATA_BREAKPOINT_LENGTH_16 (0x1)
#define DEBUG_DATA_BREAKPOINT_LENGTH_8 (0x0)
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_SET_HW_BREAKPOINT
//
typedef struct {
DEBUG_DATA_BREAKPOINT_TYPE Type;
UINT64 Address;
} DEBUG_DATA_SET_HW_BREAKPOINT;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_CLEAR_HW_BREAKPOINT
//
typedef struct {
UINT8 IndexMask; // 0x0f will clear all hw breakpoints
} DEBUG_DATA_CLEAR_HW_BREAKPOINT;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request and response data for DEBUG_COMMAND_SET_SW_BREAKPOINT
//
typedef struct {
UINT64 Address;
} DEBUG_DATA_SET_SW_BREAKPOINT;
typedef struct {
UINT8 OriginalData;
} DEBUG_DATA_RESPONSE_SET_SW_BREAKPOINT;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_READ_MEMORY
//
typedef struct {
UINT64 Address;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Width;
UINT16 Count;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
} DEBUG_DATA_READ_MEMORY;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_WRITE_MEMORY
//
typedef struct {
UINT64 Address;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Width;
UINT16 Count;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Data[1]; // The actual length is (Width * Count)
} DEBUG_DATA_WRITE_MEMORY;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request and response data for DEBUG_COMMAND_READ_IO
//
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT64 Port;
UINT8 Width;
} DEBUG_DATA_READ_IO;
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Data[1]; // The actual length depends on the packet header
} DEBUG_DATA_RESPONSE_READ_IO;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_WRITE_IO
//
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT64 Port;
UINT8 Width;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Data[1]; // The actual length is Width
} DEBUG_DATA_WRITE_IO;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_READ_REGISTER
//
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Index; // defined as SOFT_DEBUGGER_REGISTER_XX
} DEBUG_DATA_READ_REGISTER;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_WRITE_REGISTER
//
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Index; // defined as SOFT_DEBUGGER_REGISTER_XX
UINT8 Length;
UINT8 Data[1]; // The actual length is Length
} DEBUG_DATA_WRITE_REGISTER;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request and response data for DEBUG_COMMAND_READ_MSR
//
typedef struct {
UINT32 Index;
} DEBUG_DATA_READ_MSR;
typedef struct {
UINT64 Value;
} DEBUG_DATA_RESPONSE_READ_MSR;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_WRITE_MSR
//
typedef struct {
UINT32 Index;
UINT64 Value;
} DEBUG_DATA_WRITE_MSR;
//
// Response data for DEBUG_COMMAND_GET_REVISION
//
typedef struct {
UINT32 Revision;
UINT32 Capabilities;
} DEBUG_DATA_RESPONSE_GET_REVISION;
//
// Response data for DEBUG_COMMAND_GET_EXCEPTION
//
typedef struct {
UINT8 ExceptionNum;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT32 ExceptionData;
} DEBUG_DATA_RESPONSE_GET_EXCEPTION;
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_DATA_SET_DEBUG_SETTING
//
typedef struct {
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
UINT8 Key;
UINT8 Value;
} DEBUG_DATA_SET_DEBUG_SETTING;
//
// Supported keys
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
#define DEBUG_AGENT_SETTING_SMM_ENTRY_BREAK 1
#define DEBUG_AGENT_SETTING_PRINT_ERROR_LEVEL 2
#define DEBUG_AGENT_SETTING_BOOT_SCRIPT_ENTRY_BREAK 3
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Bitmask of print error level for debug message
//
#define DEBUG_AGENT_ERROR BIT0
#define DEBUG_AGENT_WARNING BIT1
#define DEBUG_AGENT_INFO BIT2
#define DEBUG_AGENT_VERBOSE BIT3
//
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
// Request data for DEBUG_COMMAND_SET_VIEWPOINT
//
typedef struct {
UINT32 ViewPoint; // The index of viewpoint will be set
} DEBUG_DATA_SET_VIEWPOINT;
//
// Response data for DEBUG_COMMAND_GET_VIEWPOINT
//
typedef struct {
UINT32 ViewPoint; // The index of viewpoint will be returned
} DEBUG_DATA_RESPONSE_GET_VIEWPOINT;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Request and response data for DEBUG_COMMAND_CPUID
//
typedef struct {
UINT32 Eax; // The value of EAX prior to invoking the CPUID instruction
UINT32 Ecx; // The value of ECX prior to invoking the CPUID instruction
} DEBUG_DATA_CPUID;
typedef struct {
UINT32 Eax; // The value of EAX returned by the CPUID instruction
UINT32 Ebx; // The value of EBX returned by the CPUID instruction
UINT32 Ecx; // The value of ECX returned by the CPUID instruction
UINT32 Edx; // The value of EDX returned by the CPUID instruction
} DEBUG_DATA_RESPONSE_CPUID;
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
//
// Request and response data for DEBUG_COMMAND_SEARCH_SIGNATURE
//
typedef struct {
UINT64 Start;
UINT32 Count;
UINT32 Alignment;
BOOLEAN Positive; // TRUE to search in higher address memory
UINT8 DataLength;
UINT8 Data[1];
} DEBUG_DATA_SEARCH_SIGNATURE;
typedef struct {
UINT64 Address; // -1 indicates not found
} DEBUG_DATA_RESPONSE_SEARCH_SIGNATURE;
#pragma pack()
#endif