audk/SourceLevelDebugPkg/Library/DebugAgent/SmmDebugAgentLib.inf

88 lines
2.7 KiB
INI
Raw Normal View History

## @file
# Debug Agent library instance for SMM modules.
#
# Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#
##
[Defines]
INF_VERSION = 0x00010005
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
BASE_NAME = SmmDebugAgentLib
MODULE_UNI_FILE = SmmDebugAgentLib.uni
FILE_GUID = CB07D74C-598F-4268-A5D1-644FB4A481E8
MODULE_TYPE = DXE_SMM_DRIVER
VERSION_STRING = 0.8
LIBRARY_CLASS = DebugAgentLib|DXE_SMM_DRIVER
#
# The following information is for reference only and not required by the build tools.
#
# VALID_ARCHITECTURES = IA32 X64
#
[Sources.common]
SmmDebugAgent/SmmDebugAgentLib.c
SmmDebugAgent/SmmDebugAgentLib.h
DebugAgentCommon/DebugAgent.c
DebugAgentCommon/DebugAgent.h
DebugAgentCommon/DebugTimer.c
DebugAgentCommon/DebugTimer.h
DebugAgentCommon/DebugMp.c
DebugAgentCommon/DebugMp.h
[Sources.Ia32]
DebugAgentCommon/Ia32/AsmFuncs.S | GCC
DebugAgentCommon/Ia32/AsmFuncs.asm
DebugAgentCommon/Ia32/ArchDebugSupport.h
DebugAgentCommon/Ia32/ArchDebugSupport.c
DebugAgentCommon/Ia32/DebugException.h
[Sources.X64]
DebugAgentCommon/X64/AsmFuncs.S | GCC
DebugAgentCommon/X64/AsmFuncs.asm
DebugAgentCommon/X64/ArchDebugSupport.h
DebugAgentCommon/X64/ArchDebugSupport.c
DebugAgentCommon/X64/DebugException.h
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
SourceLevelDebugPkg/SourceLevelDebugPkg.dec
[LibraryClasses]
BaseLib
BaseMemoryLib
ResetSystemLib
IoLib
DebugCommunicationLib
UefiLib
PcdLib
SynchronizationLib
LocalApicLib
TimerLib
This revision can only work with Intel(c) UDK Debugger Tool version 1.2 or greater. Detailed change log is as below: 1. Define the transfer protocol revision mechanism. Increase the revision number to 0.2 and inform user to use the latest one when the HOST software is too old. New HOST software will implement logic to handle all other revision mismatch cases. 2. Define new debug message packet to print the debug agent trace information by debug port channel. 3. Add check sum mechanism in the communication protocol between TARGET/HOST. 4. Introduced one "try" mechanism to avoid Debug Agent crashed by some invalid HOST command. 5. Enable the late-attach feature: Change the break in from "!" to "\xFC". Add a new short symbol "\xFA" for attach and a new debug command for detach. 6. Support Terminal work on debug port by install EFI Serial IO protocol upon Debug Communication Library. 7. Enable CPUID feature. 8. Enable the hardware data breakpoint. 9. add handshake to improve usb debug cable identify stability issue. 10.Refine all the communication protocol packet to improve extensibility and debugging performance. a. Use 64bit for IO port address. b. Add additional Width field to READ_MEMORY/WRITE_MEMORY. c. Add SEARCH_SIGNATURE support to speed the symbol finding for late attach. d. Remove READ_GROUP register. e. Add READ_ALL_REGISTERS support (WinDbg always requests to read all registers). 11.Move AcquireDebugPortControl () in advance to fix resource collision on IpiSentByApFlag. 12.Fix IO break point does not work issue in PEI phase. 13.Avoid BSP/APs collision when they met break point at the same time. 14.Solve a bug of calculating debug handle in sec phase. 15.Use mailbox content at Dxe phase but not clear it and reinitialize again. 16.Fix FP/MMX/XMM/IO/MSR access issue in both Gdb and WinDbg. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13437 6f19259b-4bc3-4df7-8a09-765794883524
2012-06-11 04:15:11 +02:00
PrintLib
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below: 1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase. Add DebugAgentDxe driver to initialize Debug Agent in DXE phase. DebugAgentDxe driver could be loaded and unloaded in shell. 2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE. 3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel. 4. Clear DR7 register in exception handler. 5. Set the default serial port parameter to 0 instead of PCDs. 6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function. 7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c. 8. Add one spin lock for accessing Mailbox when MP debugging supported. 9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell. 10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory. 11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase. 12.Add supporting on mode switch code debugging. 13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack. 14.Fix debug timer interrupt missing issue after back from legacy code. Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-25 03:36:18 +01:00
PeCoffExtraActionLib
PeCoffGetEntryPointLib
SmmServicesTableLib
[Guids]
## CONSUMES ## SystemTable
## CONSUMES ## HOB
gEfiDebugAgentGuid
gEfiVectorHandoffTableGuid ## PRODUCES ## GUID # SMM Configuration Table
[Pcd]
gEfiMdePkgTokenSpaceGuid.PcdFSBClock ## SOMETIMES_CONSUMES
# Skip Page Fault exception (14) by default in SMM
gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdExceptionsIgnoredByDebugger|0x00004000 ## SOMETIMES_CONSUMES