audk/IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdCtrller.c

2036 lines
42 KiB
C
Raw Normal View History

/**@file
PS/2 Keyboard driver
Routines that access 8042 keyboard controller
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Ps2Keyboard.h"
//
// Function declarations
//
UINT8
KeyReadDataRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
);
VOID
KeyWriteDataRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
);
VOID
KeyWriteCommandRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
);
VOID
KeyboardError (
IN KEYBOARD_CONSOLE_IN_DEV*ConsoleIn,
IN CHAR16 *ErrMsg // should be a unicode string
);
EFI_STATUS
GetScancodeBufHead (
KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT32 Count,
OUT UINT8 *Buf
);
EFI_STATUS
PopScancodeBufHead (
KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT32 Count,
OUT UINT8 *Buf
);
EFI_STATUS
KeyboardWrite (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
);
EFI_STATUS
KeyboardCommand (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
);
EFI_STATUS
KeyboardWaitForValue (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Value
);
struct {
UINT8 ScanCode;
UINT16 EfiScanCode;
CHAR16 UnicodeChar;
CHAR16 ShiftUnicodeChar;
}
ConvertKeyboardScanCodeToEfiKey[] = {
{
0x01, // Escape
SCAN_ESC,
0x00,
0x00
},
{
0x02,
SCAN_NULL,
'1',
'!'
},
{
0x03,
SCAN_NULL,
'2',
'@'
},
{
0x04,
SCAN_NULL,
'3',
'#'
},
{
0x05,
SCAN_NULL,
'4',
'$'
},
{
0x06,
SCAN_NULL,
'5',
'%'
},
{
0x07,
SCAN_NULL,
'6',
'^'
},
{
0x08,
SCAN_NULL,
'7',
'&'
},
{
0x09,
SCAN_NULL,
'8',
'*'
},
{
0x0A,
SCAN_NULL,
'9',
'('
},
{
0x0B,
SCAN_NULL,
'0',
')'
},
{
0x0C,
SCAN_NULL,
'-',
'_'
},
{
0x0D,
SCAN_NULL,
'=',
'+'
},
{
0x0E, // BackSpace
SCAN_NULL,
0x08,
0x08
},
{
0x0F, // Tab
SCAN_NULL,
0x09,
0x09
},
{
0x10,
SCAN_NULL,
'q',
'Q'
},
{
0x11,
SCAN_NULL,
'w',
'W'
},
{
0x12,
SCAN_NULL,
'e',
'E'
},
{
0x13,
SCAN_NULL,
'r',
'R'
},
{
0x14,
SCAN_NULL,
't',
'T'
},
{
0x15,
SCAN_NULL,
'y',
'Y'
},
{
0x16,
SCAN_NULL,
'u',
'U'
},
{
0x17,
SCAN_NULL,
'i',
'I'
},
{
0x18,
SCAN_NULL,
'o',
'O'
},
{
0x19,
SCAN_NULL,
'p',
'P'
},
{
0x1a,
SCAN_NULL,
'[',
'{'
},
{
0x1b,
SCAN_NULL,
']',
'}'
},
{
0x1c, // Enter
SCAN_NULL,
0x0d,
0x0d
},
{
0x1d,
SCAN_NULL,
0x00,
0x00
},
{
0x1e,
SCAN_NULL,
'a',
'A'
},
{
0x1f,
SCAN_NULL,
's',
'S'
},
{
0x20,
SCAN_NULL,
'd',
'D'
},
{
0x21,
SCAN_NULL,
'f',
'F'
},
{
0x22,
SCAN_NULL,
'g',
'G'
},
{
0x23,
SCAN_NULL,
'h',
'H'
},
{
0x24,
SCAN_NULL,
'j',
'J'
},
{
0x25,
SCAN_NULL,
'k',
'K'
},
{
0x26,
SCAN_NULL,
'l',
'L'
},
{
0x27,
SCAN_NULL,
';',
':'
},
{
0x28,
SCAN_NULL,
'\'',
'"'
},
{
0x29,
SCAN_NULL,
'`',
'~'
},
{
0x2a, // Left Shift
SCAN_NULL,
0x00,
0x00
},
{
0x2b,
SCAN_NULL,
'\\',
'|'
},
{
0x2c,
SCAN_NULL,
'z',
'Z'
},
{
0x2d,
SCAN_NULL,
'x',
'X'
},
{
0x2e,
SCAN_NULL,
'c',
'C'
},
{
0x2f,
SCAN_NULL,
'v',
'V'
},
{
0x30,
SCAN_NULL,
'b',
'B'
},
{
0x31,
SCAN_NULL,
'n',
'N'
},
{
0x32,
SCAN_NULL,
'm',
'M'
},
{
0x33,
SCAN_NULL,
',',
'<'
},
{
0x34,
SCAN_NULL,
'.',
'>'
},
{
0x35,
SCAN_NULL,
'/',
'?'
},
{
0x36, //Right Shift
SCAN_NULL,
0x00,
0x00
},
{
0x37, // Numeric Keypad *
SCAN_NULL,
'*',
'*'
},
{
0x38, //Left Alt/Extended Right Alt
SCAN_NULL,
0x00,
0x00
},
{
0x39,
SCAN_NULL,
' ',
' '
},
{
0x3A, //CapsLock
SCAN_NULL,
0x00,
0x00
},
{
0x3B,
SCAN_F1,
0x00,
0x00
},
{
0x3C,
SCAN_F2,
0x00,
0x00
},
{
0x3D,
SCAN_F3,
0x00,
0x00
},
{
0x3E,
SCAN_F4,
0x00,
0x00
},
{
0x3F,
SCAN_F5,
0x00,
0x00
},
{
0x40,
SCAN_F6,
0x00,
0x00
},
{
0x41,
SCAN_F7,
0x00,
0x00
},
{
0x42,
SCAN_F8,
0x00,
0x00
},
{
0x43,
SCAN_F9,
0x00,
0x00
},
{
0x44,
SCAN_F10,
0x00,
0x00
},
{
0x45, // NumLock
SCAN_NULL,
0x00,
0x00
},
{
0x46, // ScrollLock
SCAN_NULL,
0x00,
0x00
},
{
0x47,
SCAN_HOME,
'7',
'7'
},
{
0x48,
SCAN_UP,
'8',
'8'
},
{
0x49,
SCAN_PAGE_UP,
'9',
'9'
},
{
0x4a,
SCAN_NULL,
'-',
'-'
},
{
0x4b,
SCAN_LEFT,
'4',
'4'
},
{
0x4c, // Numeric Keypad 5
SCAN_NULL,
'5',
'5'
},
{
0x4d,
SCAN_RIGHT,
'6',
'6'
},
{
0x4e,
SCAN_NULL,
'+',
'+'
},
{
0x4f,
SCAN_END,
'1',
'1'
},
{
0x50,
SCAN_DOWN,
'2',
'2'
},
{
0x51,
SCAN_PAGE_DOWN,
'3',
'3'
},
{
0x52,
SCAN_INSERT,
'0',
'0'
},
{
0x53,
SCAN_DELETE,
'.',
'.'
},
{
0x57,
SCAN_F11,
0x00,
0x00
},
{
0x58,
SCAN_F12,
0x00,
0x00
},
{
0x5B, //Left LOGO
SCAN_NULL,
0x00,
0x00
},
{
0x5C, //Right LOGO
SCAN_NULL,
0x00,
0x00
},
{
0x5D, //Menu key
SCAN_NULL,
0x00,
0x00
},
{
TABLE_END,
TABLE_END,
SCAN_NULL,
SCAN_NULL
},
};
//
// The WaitForValue time out
//
UINTN mWaitForValueTimeOut = KEYBOARD_WAITFORVALUE_TIMEOUT;
BOOLEAN mEnableMouseInterface;
/**
Read data register
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@return return the value
**/
UINT8
KeyReadDataRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_ISA_IO_PROTOCOL *IsaIo;
UINT8 Data;
//
// Use IsaIo protocol to perform IO operations
//
IsaIo = ConsoleIn->IsaIo;
IsaIo->Io.Read (
IsaIo,
EfiIsaIoWidthUint8,
ConsoleIn->DataRegisterAddress,
1,
&Data
);
return Data;
}
/**
Write data register
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Data value wanted to be written
**/
VOID
KeyWriteDataRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
)
{
EFI_ISA_IO_PROTOCOL *IsaIo;
//
// Use IsaIo protocol to perform IO operations
//
IsaIo = ConsoleIn->IsaIo;
IsaIo->Io.Write (
IsaIo,
EfiIsaIoWidthUint8,
ConsoleIn->DataRegisterAddress,
1,
&Data
);
//
// outp(ConsoleIn->DataRegisterAddress, Data);
//
}
/**
Read status register
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@return value in status register
**/
UINT8
KeyReadStatusRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_ISA_IO_PROTOCOL *IsaIo;
UINT8 Data;
//
// Use IsaIo protocol to perform IO operations
//
IsaIo = ConsoleIn->IsaIo;
IsaIo->Io.Read (
IsaIo,
EfiIsaIoWidthUint8,
ConsoleIn->StatusRegisterAddress,
1,
&Data
);
return Data;
}
/**
Write command register
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Data The value wanted to be written
**/
VOID
KeyWriteCommandRegister (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
)
{
EFI_ISA_IO_PROTOCOL *IsaIo;
//
// Use IsaIo protocol to perform IO operations
//
IsaIo = ConsoleIn->IsaIo;
IsaIo->Io.Write (
IsaIo,
EfiIsaIoWidthUint8,
ConsoleIn->CommandRegisterAddress,
1,
&Data
);
}
/**
Display error message
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param ErrMsg Unicode string of error message
**/
VOID
KeyboardError (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN CHAR16 *ErrMsg
)
{
ConsoleIn->KeyboardErr = TRUE;
//
// gST -> ConOut -> OutputString (gST -> ConOut, L"Keyboard Driver: ");
// gST -> ConOut -> OutputString (gST -> ConOut, ErrMsg);
//
}
/**
Timer event handler: read a series of scancodes from 8042
and put them into memory scancode buffer.
it read as much scancodes to either fill
the memory buffer or empty the keyboard buffer.
It is registered as running under TPL_NOTIFY
@param Event - The timer event
@param Context - A KEYBOARD_CONSOLE_IN_DEV pointer
**/
VOID
EFIAPI
KeyboardTimerHandler (
IN EFI_EVENT Event,
IN VOID *Context
)
{
UINT8 Data;
EFI_TPL OldTpl;
KEYBOARD_CONSOLE_IN_DEV *ConsoleIn;
ConsoleIn = Context;
//
// Enter critical section
//
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
if (((KEYBOARD_CONSOLE_IN_DEV *) Context)->KeyboardErr) {
//
// Leave critical section and return
//
gBS->RestoreTPL (OldTpl);
return ;
}
//
// To let KB driver support Hot plug, here should skip the 'resend' command for the case that
// KB is not connected to system. If KB is not connected to system, driver will find there's something
// error in the following code and wait for the input buffer empty, this waiting time shoulb be short enough since
// this is a NOTIFY TPL period function, or the system performance will degrade hardly when KB is not connected.
// Just skip the 'resend' process simply.
//
Data = 0;
//
// if there is no key present, just return
//
if ((KeyReadStatusRegister (Context) & 0x21) != 0x1) {
//
// Leave critical section and return
//
gBS->RestoreTPL (OldTpl);
return ;
}
//
// Read one byte of the scan code and store it into the memory buffer
//
if (ConsoleIn->ScancodeBufCount < KEYBOARD_BUFFER_MAX_COUNT) {
Data = KeyReadDataRegister (Context);
//
// put the scancode into the memory scancode buffer
//
ConsoleIn->ScancodeBufCount++;
ConsoleIn->ScancodeBufEndPos++;
if (ConsoleIn->ScancodeBufEndPos >= KEYBOARD_BUFFER_MAX_COUNT) {
ConsoleIn->ScancodeBufEndPos = 0;
}
ConsoleIn->ScancodeBuf[ConsoleIn->ScancodeBufEndPos] = Data;
//
// Handle Alt+Ctrl+Del Key combination
//
switch (Data) {
case SCANCODE_CTRL_MAKE:
ConsoleIn->Ctrled = TRUE;
break;
case SCANCODE_CTRL_BREAK:
ConsoleIn->Ctrled = FALSE;
break;
case SCANCODE_ALT_MAKE:
ConsoleIn->Alted = TRUE;
break;
case SCANCODE_ALT_BREAK:
ConsoleIn->Alted = FALSE;
break;
}
//
// if Alt+Ctrl+Del, Reboot the System
//
if (ConsoleIn->Ctrled && ConsoleIn->Alted && Data == 0x53) {
gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);
}
}
//
// Leave critical section and return
//
gBS->RestoreTPL (OldTpl);
return ;
}
/**
Read several bytes from the scancode buffer without removing them.
This function is called to see if there are enough bytes of scancode
representing a single key.
@param Count - Number of bytes to be read
@param Buf - Store the results
@retval EFI_SUCCESS success to scan the keyboard code
@retval EFI_NOT_READY invalid parameter
**/
EFI_STATUS
GetScancodeBufHead (
KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT32 Count,
OUT UINT8 *Buf
)
{
UINT32 Index;
UINT32 Pos;
Index = 0;
Pos = 0;
//
// check the valid range of parameter 'Count'
//
if (Count <= 0 || ConsoleIn->ScancodeBufCount < Count) {
return EFI_NOT_READY;
}
//
// retrieve the values
//
for (Index = 0; Index < Count; Index++) {
if (Index == 0) {
Pos = ConsoleIn->ScancodeBufStartPos;
} else {
Pos = Pos + 1;
if (Pos >= KEYBOARD_BUFFER_MAX_COUNT) {
Pos = 0;
}
}
Buf[Index] = ConsoleIn->ScancodeBuf[Pos];
}
return EFI_SUCCESS;
}
/**
Read & remove several bytes from the scancode buffer.
This function is usually called after GetScancodeBufHead()
@param Count - Number of bytes to be read
@param Buf - Store the results
@retval EFI_SUCCESS success to scan the keyboard code
@retval EFI_NOT_READY invalid parameter
**/
EFI_STATUS
PopScancodeBufHead (
KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT32 Count,
OUT UINT8 *Buf
)
{
UINT32 Index;
Index = 0;
//
// Check the valid range of parameter 'Count'
//
if (Count <= 0 || ConsoleIn->ScancodeBufCount < Count) {
return EFI_NOT_READY;
}
//
// Retrieve and remove the values
//
for (Index = 0; Index < Count; Index++) {
if (Index != 0) {
ConsoleIn->ScancodeBufStartPos++;
if (ConsoleIn->ScancodeBufStartPos >= KEYBOARD_BUFFER_MAX_COUNT) {
ConsoleIn->ScancodeBufStartPos = 0;
}
}
Buf[Index] = ConsoleIn->ScancodeBuf[ConsoleIn->ScancodeBufStartPos];
ConsoleIn->ScancodeBufCount--;
}
ConsoleIn->ScancodeBufStartPos++;
if (ConsoleIn->ScancodeBufStartPos >= KEYBOARD_BUFFER_MAX_COUNT) {
ConsoleIn->ScancodeBufStartPos = 0;
}
return EFI_SUCCESS;
}
/**
Read key value
@param ConsoleIn - Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Data - Pointer to outof buffer for keeping key value
@retval EFI_TIMEOUT Status resigter time out
@retval EFI_SUCCESS Success to read keyboard
**/
EFI_STATUS
KeyboardRead (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
OUT UINT8 *Data
)
{
UINT32 TimeOut;
UINT32 RegFilled;
TimeOut = 0;
RegFilled = 0;
//
// wait till output buffer full then perform the read
//
for (TimeOut = 0; TimeOut < KEYBOARD_TIMEOUT; TimeOut += 30) {
if (KeyReadStatusRegister (ConsoleIn) & 0x01) {
RegFilled = 1;
*Data = KeyReadDataRegister (ConsoleIn);
break;
}
gBS->Stall (30);
}
if (!RegFilled) {
return EFI_TIMEOUT;
}
return EFI_SUCCESS;
}
/**
write key to keyboard
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Data value wanted to be written
@retval EFI_TIMEOUT - GC_TODO: Add description for return value
@retval EFI_SUCCESS - GC_TODO: Add description for return value
**/
EFI_STATUS
KeyboardWrite (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
)
{
UINT32 TimeOut;
UINT32 RegEmptied;
TimeOut = 0;
RegEmptied = 0;
//
// wait for input buffer empty
//
for (TimeOut = 0; TimeOut < KEYBOARD_TIMEOUT; TimeOut += 30) {
if (!(KeyReadStatusRegister (ConsoleIn) & 0x02)) {
RegEmptied = 1;
break;
}
gBS->Stall (30);
}
if (!RegEmptied) {
return EFI_TIMEOUT;
}
//
// Write it
//
KeyWriteDataRegister (ConsoleIn, Data);
return EFI_SUCCESS;
}
/**
Issue keyboard command
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Data The buff holding the command
@retval EFI_TIMEOUT Keyboard is not ready to issuing
@retval EFI_SUCCESS Success to issue keyboard command
**/
EFI_STATUS
KeyboardCommand (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Data
)
{
UINT32 TimeOut;
UINT32 RegEmptied;
TimeOut = 0;
RegEmptied = 0;
//
// Wait For Input Buffer Empty
//
for (TimeOut = 0; TimeOut < KEYBOARD_TIMEOUT; TimeOut += 30) {
if (!(KeyReadStatusRegister (ConsoleIn) & 0x02)) {
RegEmptied = 1;
break;
}
gBS->Stall (30);
}
if (!RegEmptied) {
return EFI_TIMEOUT;
}
//
// issue the command
//
KeyWriteCommandRegister (ConsoleIn, Data);
//
// Wait For Input Buffer Empty again
//
RegEmptied = 0;
for (TimeOut = 0; TimeOut < KEYBOARD_TIMEOUT; TimeOut += 30) {
if (!(KeyReadStatusRegister (ConsoleIn) & 0x02)) {
RegEmptied = 1;
break;
}
gBS->Stall (30);
}
if (!RegEmptied) {
return EFI_TIMEOUT;
}
return EFI_SUCCESS;
}
/**
wait for a specific value to be presented on
8042 Data register by keyboard and then read it,
used in keyboard commands ack
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@param Value the value wanted to be waited.
@retval EFI_TIMEOUT Fail to get specific value in given time
@retval EFI_SUCCESS Success to get specific value in given time.
**/
EFI_STATUS
KeyboardWaitForValue (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN UINT8 Value
)
{
UINT8 Data;
UINT32 TimeOut;
UINT32 SumTimeOut;
UINT32 GotIt;
GotIt = 0;
TimeOut = 0;
SumTimeOut = 0;
//
// Make sure the initial value of 'Data' is different from 'Value'
//
Data = 0;
if (Data == Value) {
Data = 1;
}
//
// Read from 8042 (multiple times if needed)
// until the expected value appears
// use SumTimeOut to control the iteration
//
while (1) {
//
// Perform a read
//
for (TimeOut = 0; TimeOut < KEYBOARD_TIMEOUT; TimeOut += 30) {
if (KeyReadStatusRegister (ConsoleIn) & 0x01) {
Data = KeyReadDataRegister (ConsoleIn);
break;
}
gBS->Stall (30);
}
SumTimeOut += TimeOut;
if (Data == Value) {
GotIt = 1;
break;
}
if (SumTimeOut >= mWaitForValueTimeOut) {
break;
}
}
//
// Check results
//
if (GotIt) {
return EFI_SUCCESS;
} else {
return EFI_TIMEOUT;
}
}
/**
Show keyboard status lights according to
indicators in ConsoleIn.
@param ConsoleIn Pointer to instance of KEYBOARD_CONSOLE_IN_DEV
@return status
**/
EFI_STATUS
UpdateStatusLights (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_STATUS Status;
UINT8 Command;
//
// Send keyboard command
//
Status = KeyboardWrite (ConsoleIn, 0xed);
if (EFI_ERROR (Status)) {
return Status;
}
KeyboardWaitForValue (ConsoleIn, 0xfa);
//
// Light configuration
//
Command = 0;
if (ConsoleIn->CapsLock) {
Command |= 4;
}
if (ConsoleIn->NumLock) {
Command |= 2;
}
if (ConsoleIn->ScrollLock) {
Command |= 1;
}
Status = KeyboardWrite (ConsoleIn, Command);
if (EFI_ERROR (Status)) {
return Status;
}
KeyboardWaitForValue (ConsoleIn, 0xfa);
return Status;
}
/**
Get scancode from scancode buffer
and translate into EFI-scancode and unicode defined by EFI spec
The function is always called in TPL_NOTIFY
@param ConsoleIn KEYBOARD_CONSOLE_IN_DEV instance pointer
@retval EFI_NOT_READY - Input from console not ready yet.
@retval EFI_SUCCESS - Function executed successfully.
**/
EFI_STATUS
KeyGetchar (
IN OUT KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_STATUS Status;
UINT8 ScanCode;
UINT8 Readed;
BOOLEAN Extended;
UINT8 ScancodeArr[4];
UINTN Index;
//
// 4 bytes most
//
UINT32 ScancodeArrPos;
//
// point to the current position in ScancodeArr
//
Readed = 0;
Extended = FALSE;
ScancodeArrPos = 0;
//
// Read one byte of the scan code and store it into the memory buffer
// This block of code is added to insert an action that is equivalent to
// the timer event handling function, so as to increase the frequency of
// detecting the availability of keys. Timer event has a max frequency of
// 18Hz which is insufficient
//
//
// To let KB driver support Hot plug, here should skip the 'resend' command for the case that
// KB is not connected to system. If KB is not connected to system, driver will find there's something
// error in the following code and wait for the input buffer empty, this waiting time shoulb be short enough since
// this is a NOTIFY TPL period function, or the system performance will degrade hardly when KB is not connected.
// Just skip the 'resend' process simply.
//
if (((KeyReadStatusRegister (ConsoleIn) & 0x21) == 0x1) && (ConsoleIn->ScancodeBufCount < KEYBOARD_BUFFER_MAX_COUNT)) {
Readed = KeyReadDataRegister (ConsoleIn);
//
// put the scancode into the memory scancode buffer
//
ConsoleIn->ScancodeBufCount++;
ConsoleIn->ScancodeBufEndPos++;
if (ConsoleIn->ScancodeBufEndPos >= KEYBOARD_BUFFER_MAX_COUNT) {
ConsoleIn->ScancodeBufEndPos = 0;
}
ConsoleIn->ScancodeBuf[ConsoleIn->ScancodeBufEndPos] = Readed;
//
// Handle Alt+Ctrl+Del Key combination
//
switch (Readed) {
case SCANCODE_CTRL_MAKE:
ConsoleIn->Ctrled = TRUE;
break;
case SCANCODE_CTRL_BREAK:
ConsoleIn->Ctrled = FALSE;
break;
case SCANCODE_ALT_MAKE:
ConsoleIn->Alted = TRUE;
break;
case SCANCODE_ALT_BREAK:
ConsoleIn->Alted = FALSE;
break;
}
//
// if Alt+Ctrl+Del, Reboot the System
//
if (ConsoleIn->Ctrled && ConsoleIn->Alted && Readed == 0x53) {
gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);
}
}
//
// Check if there are enough bytes of scancode representing a single key
// available in the buffer
//
while (1) {
Status = GetScancodeBufHead (ConsoleIn, 1, ScancodeArr);
ScancodeArrPos = 0;
if (EFI_ERROR (Status)) {
return EFI_NOT_READY;
}
if (ScancodeArr[ScancodeArrPos] == SCANCODE_EXTENDED) {
Extended = TRUE;
Status = GetScancodeBufHead (ConsoleIn, 2, ScancodeArr);
ScancodeArrPos = 1;
if (EFI_ERROR (Status)) {
return EFI_NOT_READY;
}
}
//
// Checks for key scancode for PAUSE:E1-1D/45-E1/9D-C5
// if present, ignore them
//
if (ScancodeArr[ScancodeArrPos] == SCANCODE_EXTENDED1) {
Status = GetScancodeBufHead (ConsoleIn, 2, ScancodeArr);
ScancodeArrPos = 1;
if (EFI_ERROR (Status)) {
return EFI_NOT_READY;
}
Status = GetScancodeBufHead (ConsoleIn, 3, ScancodeArr);
ScancodeArrPos = 2;
if (EFI_ERROR (Status)) {
return EFI_NOT_READY;
}
PopScancodeBufHead (ConsoleIn, 3, ScancodeArr);
return EFI_NOT_READY;
}
//
// if we reach this position, scancodes for a key is in buffer now,pop them
//
Status = PopScancodeBufHead (ConsoleIn, ScancodeArrPos + 1, ScancodeArr);
if (EFI_ERROR (Status)) {
return EFI_NOT_READY;
}
//
// store the last available byte, this byte of scancode will be checked
//
ScanCode = ScancodeArr[ScancodeArrPos];
//
// Check for special keys and update the driver state.
//
switch (ScanCode) {
case SCANCODE_CTRL_MAKE:
ConsoleIn->Ctrl = TRUE;
break;
case SCANCODE_CTRL_BREAK:
ConsoleIn->Ctrl = FALSE;
break;
case SCANCODE_ALT_MAKE:
ConsoleIn->Alt = TRUE;
break;
case SCANCODE_ALT_BREAK:
ConsoleIn->Alt = FALSE;
break;
case SCANCODE_LEFT_SHIFT_MAKE:
if (!Extended) {
ConsoleIn->Shift = TRUE;
ConsoleIn->LeftShift = TRUE;
}
break;
case SCANCODE_RIGHT_SHIFT_MAKE:
if (!Extended) {
ConsoleIn->Shift = TRUE;
ConsoleIn->RightShift = TRUE;
}
break;
case SCANCODE_LEFT_SHIFT_BREAK:
if (!Extended) {
ConsoleIn->Shift = FALSE;
ConsoleIn->LeftShift = FALSE;
} else {
ConsoleIn->SysReq = FALSE;
}
break;
case SCANCODE_RIGHT_SHIFT_BREAK:
if (!Extended) {
ConsoleIn->Shift = FALSE;
ConsoleIn->RightShift = FALSE;
}
break;
case SCANCODE_LEFT_LOGO_MAKE:
ConsoleIn->LeftLogo = TRUE;
break;
case SCANCODE_LEFT_LOGO_BREAK:
ConsoleIn->LeftLogo = FALSE;
break;
case SCANCODE_RIGHT_LOGO_MAKE:
ConsoleIn->RightLogo = TRUE;
break;
case SCANCODE_RIGHT_LOGO_BREAK:
ConsoleIn->RightLogo = FALSE;
break;
case SCANCODE_MENU_MAKE:
ConsoleIn->Menu = TRUE;
break;
case SCANCODE_MENU_BREAK:
ConsoleIn->Menu = FALSE;
break;
case SCANCODE_SYS_REQ_MAKE:
if (Extended) {
ConsoleIn->SysReq = TRUE;
}
case SCANCODE_CAPS_LOCK_MAKE:
ConsoleIn->CapsLock = (BOOLEAN)!ConsoleIn->CapsLock;
UpdateStatusLights (ConsoleIn);
break;
case SCANCODE_NUM_LOCK_MAKE:
ConsoleIn->NumLock = (BOOLEAN)!ConsoleIn->NumLock;
UpdateStatusLights (ConsoleIn);
break;
case SCANCODE_SCROLL_LOCK_MAKE:
ConsoleIn->ScrollLock = (BOOLEAN)!ConsoleIn->ScrollLock;
UpdateStatusLights (ConsoleIn);
break;
}
//
// If this is a BREAK Key or above the valid range, ignore it
//
if (ScanCode >= SCANCODE_MAX_MAKE) {
continue;
} else {
break;
}
}
//
// Treat Numeric Key Pad "/" specially
//
if (Extended && ScanCode == 0x35) {
ConsoleIn->Key.ScanCode = SCAN_NULL;
ConsoleIn->Key.UnicodeChar = '/';
return EFI_SUCCESS;
}
//
// Convert Keyboard ScanCode into an EFI Key
//
for (Index = 0; ConvertKeyboardScanCodeToEfiKey[Index].ScanCode != TABLE_END; Index += 1) {
if (ScanCode == ConvertKeyboardScanCodeToEfiKey[Index].ScanCode) {
ConsoleIn->Key.ScanCode = ConvertKeyboardScanCodeToEfiKey[Index].EfiScanCode;
if (ConsoleIn->Shift) {
ConsoleIn->Key.UnicodeChar = ConvertKeyboardScanCodeToEfiKey[Index].ShiftUnicodeChar;
//
// Need not return associated shift state if a class of printable characters that
// are normally adjusted by shift modifiers. e.g. Shift Key + 'f' key = 'F'
//
if (ConsoleIn->Key.UnicodeChar >= 'A' && ConsoleIn->Key.UnicodeChar <= 'Z') {
ConsoleIn->LeftShift = FALSE;
ConsoleIn->RightShift = FALSE;
}
} else {
ConsoleIn->Key.UnicodeChar = ConvertKeyboardScanCodeToEfiKey[Index].UnicodeChar;
}
//
// alphabetic key is affected by CapsLock State
//
if (ConsoleIn->CapsLock) {
if (ConsoleIn->Key.UnicodeChar >= 'a' && ConsoleIn->Key.UnicodeChar <= 'z') {
ConsoleIn->Key.UnicodeChar = ConvertKeyboardScanCodeToEfiKey[Index].ShiftUnicodeChar;
} else if (ConsoleIn->Key.UnicodeChar >= 'A' && ConsoleIn->Key.UnicodeChar <= 'Z') {
ConsoleIn->Key.UnicodeChar = ConvertKeyboardScanCodeToEfiKey[Index].UnicodeChar;
}
}
//
// Translate the CTRL-Alpha characters to their corresponding control value (ctrl-a = 0x0001 through ctrl-Z = 0x001A)
//
if (ConsoleIn->Ctrled) {
if (ConsoleIn->Key.UnicodeChar >= 'a' && ConsoleIn->Key.UnicodeChar <= 'z') {
ConsoleIn->Key.UnicodeChar = (UINT16) (ConsoleIn->Key.UnicodeChar - 'a' + 1);
} else if (ConsoleIn->Key.UnicodeChar >= 'A' && ConsoleIn->Key.UnicodeChar <= 'Z') {
ConsoleIn->Key.UnicodeChar = (UINT16) (ConsoleIn->Key.UnicodeChar - 'A' + 1);
}
}
break;
}
}
//
// distinguish numeric key pad keys' 'up symbol' and 'down symbol'
//
if (ScanCode >= 0x47 && ScanCode <= 0x53) {
if (ConsoleIn->NumLock && !ConsoleIn->Shift && !Extended) {
ConsoleIn->Key.ScanCode = SCAN_NULL;
} else if (ScanCode != 0x4a && ScanCode != 0x4e) {
ConsoleIn->Key.UnicodeChar = 0x00;
}
}
//
// If the key can not be converted then just return.
//
if (ConsoleIn->Key.ScanCode == SCAN_NULL && ConsoleIn->Key.UnicodeChar == 0x00) {
return EFI_NOT_READY;
}
//
// Save the Shift/Toggle state
//
if (ConsoleIn->Ctrl) {
ConsoleIn->KeyState.KeyShiftState |= (Extended == TRUE) ? EFI_RIGHT_CONTROL_PRESSED : EFI_LEFT_CONTROL_PRESSED;
}
if (ConsoleIn->Alt) {
ConsoleIn->KeyState.KeyShiftState |= (Extended == TRUE) ? EFI_RIGHT_ALT_PRESSED : EFI_LEFT_ALT_PRESSED;
}
if (ConsoleIn->LeftShift) {
ConsoleIn->KeyState.KeyShiftState |= EFI_LEFT_SHIFT_PRESSED;
}
if (ConsoleIn->RightShift) {
ConsoleIn->KeyState.KeyShiftState |= EFI_RIGHT_SHIFT_PRESSED;
}
if (ConsoleIn->LeftLogo) {
ConsoleIn->KeyState.KeyShiftState |= EFI_LEFT_LOGO_PRESSED;
}
if (ConsoleIn->RightLogo) {
ConsoleIn->KeyState.KeyShiftState |= EFI_RIGHT_LOGO_PRESSED;
}
if (ConsoleIn->Menu) {
ConsoleIn->KeyState.KeyShiftState |= EFI_MENU_KEY_PRESSED;
}
if (ConsoleIn->SysReq) {
ConsoleIn->KeyState.KeyShiftState |= EFI_SYS_REQ_PRESSED;
}
if (ConsoleIn->CapsLock) {
ConsoleIn->KeyState.KeyToggleState |= EFI_CAPS_LOCK_ACTIVE;
}
if (ConsoleIn->NumLock) {
ConsoleIn->KeyState.KeyToggleState |= EFI_NUM_LOCK_ACTIVE;
}
if (ConsoleIn->ScrollLock) {
ConsoleIn->KeyState.KeyToggleState |= EFI_SCROLL_LOCK_ACTIVE;
}
return EFI_SUCCESS;
}
/**
Perform 8042 controller and keyboard Initialization
If ExtendedVerification is TRUE, do additional test for
the keyboard interface
@param ConsoleIn - KEYBOARD_CONSOLE_IN_DEV instance pointer
@param ExtendedVerification - indicates a thorough initialization
@retval EFI_DEVICE_ERROR Fail to init keyboard
@retval EFI_SUCCESS Success to init keyboard
**/
EFI_STATUS
InitKeyboard (
IN OUT KEYBOARD_CONSOLE_IN_DEV *ConsoleIn,
IN BOOLEAN ExtendedVerification
)
{
EFI_STATUS Status;
EFI_STATUS Status1;
UINT8 CommandByte;
EFI_PS2_POLICY_PROTOCOL *Ps2Policy;
Status = EFI_SUCCESS;
mEnableMouseInterface = TRUE;
//
// Get Ps2 policy to set this
//
Status = gBS->LocateProtocol (
&gEfiPs2PolicyProtocolGuid,
NULL,
(VOID **) &Ps2Policy
);
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_PERIPHERAL_KEYBOARD | EFI_P_KEYBOARD_PC_CLEAR_BUFFER,
ConsoleIn->DevicePath
);
//
// Perform a read to cleanup the Status Register's
// output buffer full bits
//
while (!EFI_ERROR (Status)) {
Status = KeyboardRead (ConsoleIn, &CommandByte);
}
//
// We should disable mouse interface during the initialization process
// since mouse device output could block keyboard device output in the
// 60H port of 8042 controller.
//
// So if we are not initializing 8042 controller for the
// first time, we have to remember the previous mouse interface
// enabling state
//
// Test the system flag in to determine whether this is the first
// time initialization
//
if ((KeyReadStatusRegister (ConsoleIn) & 0x04)) {
//
// 8042 controller is already setup (by myself or by mouse driver):
// See whether mouse interface is already enabled
// which determines whether we should enable it later
//
//
// Read the command byte of 8042 controller
//
Status = KeyboardCommand (ConsoleIn, 0x20);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"\n\r");
goto Done;
}
Status = KeyboardRead (ConsoleIn, &CommandByte);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"\n\r");
goto Done;
}
//
// Test the mouse enabling bit
//
if (CommandByte & 0x20) {
mEnableMouseInterface = FALSE;
} else {
mEnableMouseInterface = TRUE;
}
} else {
//
// 8042 controller is not setup yet:
// 8042 controller selftest;
// Don't enable mouse interface later.
//
//
// Disable keyboard and mouse interfaces
//
Status = KeyboardCommand (ConsoleIn, 0xad);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"\n\r");
goto Done;
}
Status = KeyboardCommand (ConsoleIn, 0xa7);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"\n\r");
goto Done;
}
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_PERIPHERAL_KEYBOARD | EFI_P_KEYBOARD_PC_SELF_TEST,
ConsoleIn->DevicePath
);
//
// 8042 Controller Self Test
//
Status = KeyboardCommand (ConsoleIn, 0xaa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller command write error!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0x55);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller self test failed!\n\r");
goto Done;
}
//
// Don't enable mouse interface later
//
mEnableMouseInterface = FALSE;
}
if (Ps2Policy != NULL) {
Ps2Policy->Ps2InitHardware (ConsoleIn->Handle);
}
//
// Write 8042 Command Byte, set System Flag
// While at the same time:
// 1. disable mouse interface,
// 2. enable kbd interface,
// 3. enable PC/XT kbd translation mode
// 4. enable mouse and kbd interrupts
//
// ( Command Byte bits:
// 7: Reserved
// 6: PC/XT translation mode
// 5: Disable Auxiliary device interface
// 4: Disable keyboard interface
// 3: Reserved
// 2: System Flag
// 1: Enable Auxiliary device interrupt
// 0: Enable Keyboard interrupt )
//
Status = KeyboardCommand (ConsoleIn, 0x60);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller command write error!\n\r");
goto Done;
}
Status = KeyboardWrite (ConsoleIn, 0x67);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller data write error!\n\r");
goto Done;
}
//
// Clear Memory Scancode Buffer
//
ConsoleIn->ScancodeBufStartPos = 0;
ConsoleIn->ScancodeBufEndPos = KEYBOARD_BUFFER_MAX_COUNT - 1;
ConsoleIn->ScancodeBufCount = 0;
ConsoleIn->Ctrled = FALSE;
ConsoleIn->Alted = FALSE;
//
// Reset the status indicators
//
ConsoleIn->Ctrl = FALSE;
ConsoleIn->Alt = FALSE;
ConsoleIn->Shift = FALSE;
ConsoleIn->CapsLock = FALSE;
ConsoleIn->NumLock = FALSE;
ConsoleIn->ScrollLock = FALSE;
ConsoleIn->LeftShift = FALSE;
ConsoleIn->RightShift = FALSE;
ConsoleIn->LeftLogo = FALSE;
ConsoleIn->RightLogo = FALSE;
ConsoleIn->Menu = FALSE;
ConsoleIn->SysReq = FALSE;
//
// For reseting keyboard is not mandatory before booting OS and sometimes keyboard responses very slow,
// and to support KB hot plug, we need to let the InitKB succeed no matter whether there is a KB device connected
// to system. So we only do the real reseting for keyboard when user asks and there is a real KB connected t system,
// and normally during booting an OS, it's skipped.
//
if (ExtendedVerification && CheckKeyboardConnect (ConsoleIn)) {
//
// Additional verifications for keyboard interface
//
//
// Keyboard Interface Test
//
Status = KeyboardCommand (ConsoleIn, 0xab);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller command write error!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0x00);
if (EFI_ERROR (Status)) {
KeyboardError (
ConsoleIn,
L"Some specific value not aquired from 8042 controller!\n\r"
);
goto Done;
}
//
// Keyboard reset with a BAT(Basic Assurance Test)
//
Status = KeyboardWrite (ConsoleIn, 0xff);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller data write error!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0xfa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Some specific value not aquired from 8042 controller!\n\r");
goto Done;
}
//
// wait for BAT completion code
//
mWaitForValueTimeOut = KEYBOARD_BAT_TIMEOUT;
Status = KeyboardWaitForValue (ConsoleIn, 0xaa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Keyboard self test failed!\n\r");
goto Done;
}
mWaitForValueTimeOut = KEYBOARD_WAITFORVALUE_TIMEOUT;
//
// Set Keyboard to use Scan Code Set 2
//
Status = KeyboardWrite (ConsoleIn, 0xf0);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller data write error!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0xfa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Some specific value not aquired from 8042 controller!\n\r");
goto Done;
}
Status = KeyboardWrite (ConsoleIn, 0x02);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller data write error!!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0xfa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Some specific value not aquired from 8042 controller!\n\r");
goto Done;
}
//
// Clear Keyboard Scancode Buffer
//
Status = KeyboardWrite (ConsoleIn, 0xf4);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"8042 controller data write error!\n\r");
goto Done;
}
Status = KeyboardWaitForValue (ConsoleIn, 0xfa);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Some specific value not aquired from 8042 controller!\n\r");
goto Done;
}
//
if (Ps2Policy != NULL) {
if ((Ps2Policy->KeyboardLight & EFI_KEYBOARD_CAPSLOCK) == EFI_KEYBOARD_CAPSLOCK) {
ConsoleIn->CapsLock = TRUE;
}
if ((Ps2Policy->KeyboardLight & EFI_KEYBOARD_NUMLOCK) == EFI_KEYBOARD_NUMLOCK) {
ConsoleIn->NumLock = TRUE;
}
if ((Ps2Policy->KeyboardLight & EFI_KEYBOARD_SCROLLLOCK) == EFI_KEYBOARD_SCROLLLOCK) {
ConsoleIn->ScrollLock = TRUE;
}
}
//
// Update Keyboard Lights
//
Status = UpdateStatusLights (ConsoleIn);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"Update keyboard status lights error!\n\r");
goto Done;
}
}
//
// At last, we can now enable the mouse interface if appropriate
//
Done:
if (mEnableMouseInterface) {
//
// Enable mouse interface
//
Status1 = KeyboardCommand (ConsoleIn, 0xa8);
if (EFI_ERROR (Status1)) {
KeyboardError (ConsoleIn, L"8042 controller command write error!\n\r");
return EFI_DEVICE_ERROR;
}
}
if (!EFI_ERROR (Status)) {
return EFI_SUCCESS;
} else {
return EFI_DEVICE_ERROR;
}
}
/**
Disable the keyboard interface of the 8042 controller
@param ConsoleIn - the device instance
@return status of issuing disable command
**/
EFI_STATUS
DisableKeyboard (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_STATUS Status;
//
// Disable keyboard interface
//
Status = KeyboardCommand (ConsoleIn, 0xad);
if (EFI_ERROR (Status)) {
KeyboardError (ConsoleIn, L"\n\r");
return EFI_DEVICE_ERROR;
}
return Status;
}
/**
Check whether there is Ps/2 Keyboard device in system by 0xF4 Keyboard Command
If Keyboard receives 0xF4, it will respond with 'ACK'. If it doesn't respond, the device
should not be in system.
@param[in] ConsoleIn Keyboard Private Data Structure
@retval TRUE Keyboard in System.
@retval FALSE Keyboard not in System.
**/
BOOLEAN
EFIAPI
CheckKeyboardConnect (
IN KEYBOARD_CONSOLE_IN_DEV *ConsoleIn
)
{
EFI_STATUS Status;
UINTN WaitForValueTimeOutBcakup;
Status = EFI_SUCCESS;
//
// enable keyboard itself and wait for its ack
// If can't receive ack, Keyboard should not be connected.
//
Status = KeyboardWrite (
ConsoleIn,
KEYBOARD_KBEN
);
if (EFI_ERROR (Status)) {
return FALSE;
}
//
// wait for 1s
//
WaitForValueTimeOutBcakup = mWaitForValueTimeOut;
mWaitForValueTimeOut = KEYBOARD_WAITFORVALUE_TIMEOUT;
Status = KeyboardWaitForValue (
ConsoleIn,
KEYBOARD_CMDECHO_ACK
);
mWaitForValueTimeOut = WaitForValueTimeOutBcakup;
if (EFI_ERROR (Status)) {
return FALSE;
}
return TRUE;
}