audk/OvmfPkg/OvmfPkgX64.fdf

534 lines
18 KiB
Plaintext
Raw Normal View History

## @file
# Open Virtual Machine Firmware: FDF
#
# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
OvmfPkg: use StatusCode Router and Handler from MdeModulePkg In the Platform Init v1.4a spec, - Volume 1 "4.7 Status Code Service" defines the EFI_PEI_SERVICES.ReportStatusCode() service, - Volume 1 "6.3.5 Status Code PPI (Optional)" defines the EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above), - Volume 2 "14.2 Status Code Runtime Protocol" defines the EFI_STATUS_CODE_PROTOCOL. These allow PEIMs and DXE (and later) modules to report status codes. Currently OvmfPkg uses modules from under "IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above abstractions (PPI and PROTOCOL) directly, and write the status codes, as they are reported, to the serial port or to a memory buffer. This is called "handling" the status codes. In the Platform Init v1.4a spec, - Volume 3 "7.2.2 Report Status Code Handler PPI" defines EFI_PEI_RSC_HANDLER_PPI, - Volume 3 "7.2.1 Report Status Code Handler Protocol" defines EFI_RSC_HANDLER_PROTOCOL. These allow several PEIMs and runtime DXE drivers to register callbacks for status code handling. MdeModulePkg offers a PEIM under "MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe" that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL. MdeModulePkg also offers status code handler modules under MdeModulePkg/Universal/StatusCodeHandler/ that depend on EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively. The StatusCodeHandler modules register themselves with ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI / EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches the phase-matching ReportStatusCodeRouter module first, which in turn passes the status code to the pre-registered, phase-matching StatusCodeHandler module. The status code handling in the StatusCodeHandler modules is identical to the one currently provided by the IntelFrameworkModulePkg modules. Replace the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can decrease our dependency on IntelFrameworkModulePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com> Suggested-by: Liming Gao <liming.gao@intel.com> Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63 [jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos] Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2016-08-02 19:25:10 +02:00
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
################################################################################
[Defines]
!include OvmfPkg.fdf.inc
#
# Build the variable store and the firmware code as one unified flash device
# image.
#
[FD.OVMF]
BaseAddress = $(FW_BASE_ADDRESS)
Size = $(FW_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(FW_BLOCKS)
!include VarStore.fdf.inc
$(VARS_SIZE)|$(FVMAIN_SIZE)
FV = FVMAIN_COMPACT
$(SECFV_OFFSET)|$(SECFV_SIZE)
FV = SECFV
#
# Build the variable store and the firmware code as separate flash device
# images.
#
[FD.OVMF_VARS]
BaseAddress = $(FW_BASE_ADDRESS)
Size = $(VARS_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(VARS_BLOCKS)
!include VarStore.fdf.inc
[FD.OVMF_CODE]
BaseAddress = $(CODE_BASE_ADDRESS)
Size = $(CODE_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(CODE_BLOCKS)
0x00000000|$(FVMAIN_SIZE)
FV = FVMAIN_COMPACT
$(FVMAIN_SIZE)|$(SECFV_SIZE)
FV = SECFV
################################################################################
[FD.MEMFD]
BaseAddress = $(MEMFD_BASE_ADDRESS)
Size = 0xB00000
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0xB0
0x000000|0x006000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
0x006000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageSize
OvmfPkg: PlatformPei: protect SEC's GUIDed section handler table thru S3 OVMF's SecMain is unique in the sense that it links against the following two libraries *in combination*: - IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/ LzmaCustomDecompressLib.inf - MdePkg/Library/BaseExtractGuidedSectionLib/ BaseExtractGuidedSectionLib.inf The ExtractGuidedSectionLib library class allows decompressor modules to register themselves (keyed by GUID) with it, and it allows clients to decompress file sections with a registered decompressor module that matches the section's GUID. BaseExtractGuidedSectionLib is a library instance (of type BASE) for this library class. It has no constructor function. LzmaCustomDecompressLib is a compatible decompressor module (of type BASE). Its section type GUID is gLzmaCustomDecompressGuid == EE4E5898-3914-4259-9D6E-DC7BD79403CF When OVMF's SecMain module starts, the LzmaCustomDecompressLib constructor function is executed, which registers its LZMA decompressor with the above GUID, by calling into BaseExtractGuidedSectionLib: LzmaDecompressLibConstructor() [GuidedSectionExtraction.c] ExtractGuidedSectionRegisterHandlers() [BaseExtractGuidedSectionLib.c] GetExtractGuidedSectionHandlerInfo() PcdGet64 (PcdGuidedExtractHandlerTableAddress) -- NOTE THIS Later, during a normal (non-S3) boot, SecMain utilizes this decompressor to get information about, and to decompress, sections of the OVMF firmware image: SecCoreStartupWithStack() [OvmfPkg/Sec/SecMain.c] SecStartupPhase2() FindAndReportEntryPoints() FindPeiCoreImageBase() DecompressMemFvs() ExtractGuidedSectionGetInfo() [BaseExtractGuidedSectionLib.c] ExtractGuidedSectionDecode() [BaseExtractGuidedSectionLib.c] Notably, only the extraction depends on full-config-boot; the registration of LzmaCustomDecompressLib occurs unconditionally in the SecMain EFI binary, triggered by the library constructor function. This is where the bug happens. BaseExtractGuidedSectionLib maintains the table of GUIDed decompressors (section handlers) at a fixed memory location; selected by PcdGuidedExtractHandlerTableAddress (declared in MdePkg.dec). The default value of this PCD is 0x1000000 (16 MB). This causes SecMain to corrupt guest OS memory during S3, leading to random crashes. Compare the following two memory dumps, the first taken right before suspending, the second taken right after resuming a RHEL-7 guest: crash> rd -8 -p 1000000 0x50 1000000: c0 00 08 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 1000010: d0 33 0c 00 00 c9 ff ff c0 10 00 01 00 88 ff ff .3.............. 1000020: 0a 6d 57 32 0f 00 00 00 38 00 00 01 00 88 ff ff .mW2....8....... 1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo 1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so......... vs. crash> rd -8 -p 1000000 0x50 1000000: 45 47 53 49 01 00 00 00 20 00 00 01 00 00 00 00 EGSI.... ....... 1000010: 20 01 00 01 00 00 00 00 a0 01 00 01 00 00 00 00 ............... 1000020: 98 58 4e ee 14 39 59 42 9d 6e dc 7b d7 94 03 cf .XN..9YB.n.{.... 1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo 1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so......... The "EGSI" signature corresponds to EXTRACT_HANDLER_INFO_SIGNATURE declared in MdePkg/Library/BaseExtractGuidedSectionLib/BaseExtractGuidedSectionLib.c. Additionally, the gLzmaCustomDecompressGuid (quoted above) is visible at guest-phys offset 0x1000020. Fix the problem as follows: - Carve out 4KB from the 36KB gap that we currently have between PcdOvmfLockBoxStorageBase + PcdOvmfLockBoxStorageSize == 8220 KB and PcdOvmfSecPeiTempRamBase == 8256 KB. - Point PcdGuidedExtractHandlerTableAddress to 8220 KB (0x00807000). - Cover the area with an EfiACPIMemoryNVS type memalloc HOB, if S3 is supported and we're not currently resuming. The 4KB size that we pick is an upper estimate for BaseExtractGuidedSectionLib's internal storage size. The latter is calculated as follows (see GetExtractGuidedSectionHandlerInfo()): sizeof(EXTRACT_GUIDED_SECTION_HANDLER_INFO) + // 32 PcdMaximumGuidedExtractHandler * ( sizeof(GUID) + // 16 sizeof(EXTRACT_GUIDED_SECTION_DECODE_HANDLER) + // 8 sizeof(EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER) // 8 ) OVMF sets PcdMaximumGuidedExtractHandler to 16 decimal (which is the MdePkg default too), yielding 32 + 16 * (16 + 8 + 8) == 544 bytes. Regarding the lifecycle of the new area: (a) when and how it is initialized after first boot of the VM The library linked into SecMain finds that the area lacks the signature. It initializes the signature, plus the rest of the structure. This is independent of S3 support. Consumption of the area is also limited to SEC (but consumption does depend on full-config-boot). (b) how it is protected from memory allocations during DXE It is not, in the general case; and we don't need to. Nothing else links against BaseExtractGuidedSectionLib; it's OK if DXE overwrites the area. (c) how it is protected from the OS When S3 is enabled, we cover it with AcpiNVS in InitializeRamRegions(). When S3 is not supported, the range is not protected. (d) how it is accessed on the S3 resume path Examined by the library linked into SecMain. Registrations update the table in-place (based on GUID matches). (e) how it is accessed on the warm reset path If S3 is enabled, then the OS won't damage the table (due to (c)), hence see (d). If S3 is unsupported, then the OS may or may not overwrite the signature. (It likely will.) This is identical to the pre-patch status. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15433 6f19259b-4bc3-4df7-8a09-765794883524
2014-04-05 23:26:09 +02:00
0x007000|0x001000
gEfiMdePkgTokenSpaceGuid.PcdGuidedExtractHandlerTableAddress|gUefiOvmfPkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
OvmfPkg: restore temporary SEC/PEI RAM size to 64KB (1) In the PEI phase, the PCD database is maintained in a GUID HOB. In OVMF, we load the PCD PEIM before any other PEIMs (using APRIORI PEI), so that all other PEIMs can use dynamic PCDs. Consequently, - the PCD GUID HOB is initially allocated from the temporary SEC/PEI heap, - whenever we introduce a dynamic PCD to a PEIM built into OVMF such that the PCD is new to OVMF's whole PEI phase, the PCD GUID HOB (and its temporary heap footprint) grow. I've noticed that, if we add just one more dynamic PCD to the PEI phase, then in the X64 build, - we get very close to the half of the temporary heap (i.e., 8192 bytes), - obscure PEI phase hangs or DXE core initialization failures (ASSERTs) occur. The symptoms vary between the FD_SIZE_2MB and FD_SIZE_4MB builds of X64 OVMF. (2) I've found that commit 2bbd7e2fbd4b ("UefiCpuPkg/MtrrLib: Update algorithm to calculate optimal settings", 2017-09-27) introduced a large (16KB) stack allocation: > The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and > MtrrSetMemoryAttribute() to use the 4-page stack buffer for calculation. > ... > +#define SCRATCH_BUFFER_SIZE (4 * SIZE_4KB) > ... > @@ -2207,17 +2462,66 @@ MtrrSetMemoryAttributeInMtrrSettings ( > ... > + UINT8 Scratch[SCRATCH_BUFFER_SIZE]; (3) OVMF's temp SEC/PEI RAM size has been 32KB ever since commit 7cb6b0e06809 ("OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to 0x810000", 2014-01-21) Of that, the upper 16KB half is stack (growing down), and the lower 16KB half is heap. Thus, OvmfPkg/PlatformPei's calls to "UefiCpuPkg/Library/MtrrLib", in QemuInitializeRam(), cause the Scratch array to overflow the entire stack (heading towards lower addresses), and corrupt the heap below the stack. It turns out that the total stack demand is about 24KB, so the overflow is able to corrupt the upper 8KB of the heap. If that part of the heap is actually used (for example because we grow the PCD GUID HOB sufficiently), mayhem ensues. (4) Right after commit 7cb6b0e06809 (see above), there would be no room left above the 32KB temp SEC/PEI RAM. However, given more recent commits 45d870815156 ("OvmfPkg/PlatformPei: rebase and resize the permanent PEI memory for S3", 2016-07-13) 6b04cca4d697 ("OvmfPkg: remove PcdS3AcpiReservedMemoryBase, PcdS3AcpiReservedMemorySize", 2016-07-12) we can now restore the temp SEC/PEI RAM size to the original (pre-7cb6b0e06809) 64KB. This will allow for a 32KB temp SEC/PEI stack, which accommodates the ~24KB demand mentioned in (3). (Prior patches in this series will let us monitor the stack usage in the future.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747 Ref: http://mid.mail-archive.com/a49cc089-12ae-a887-a4d6-4dc509233a74@redhat.com Ref: http://mid.mail-archive.com/03e369bb-77c4-0134-258f-bdae62cbc8c5@redhat.com Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-10-24 17:21:25 +02:00
0x010000|0x010000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
0x020000|0x0E0000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
FV = PEIFV
0x100000|0xA00000
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
FV = DXEFV
################################################################################
[FV.SECFV]
OvmfPkg: add a Name GUID to each Firmware Volume The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but the detailed description can be found in Volume 3 of the Platform Init spec (which is at 1.4a currently). Adding an FvNameGuid statement to [FV.xxx] has the following effects (implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"): - The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not directly, see below). - An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to address. This object is not followed by any EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only specifies the Name GUID for the firmware volume. The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found in the Build directory as a separate file (20 bytes in size): Build/Ovmf*/*_GCC*/FV/*.ext - The new data consume 48 bytes in the following volumes: SECFV, FVMAIN_COMPACT, DXEFV. They comprise: - 16 padding bytes, - EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize fields, and Type=EFI_FV_FILETYPE_FFS_PAD), - EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above), - 4 padding bytes. (The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point immediately past EFI_FIRMWARE_VOLUME_HEADER.) The sizes of the firmware volumes don't change, only their internal usages grow by 48 bytes. I verified that the statements and calculations in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid. - The new data consume 0 bytes in PEIFV. This is because PEIFV has enough internal padding at the moment to accomodate the above structures without a growth in usage. In the future, firmware volumes can be identified by Name GUID (Fv(...) device path nodes), rather than memory location (MemoryMapped(...) device path nodes). This is supposed to improve stability for persistent device paths that refer to FFS files; for example, UEFI boot options. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-12 16:48:47 +02:00
FvNameGuid = 763BED0D-DE9F-48F5-81F1-3E90E1B1A015
BlockSize = 0x1000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# SEC Phase modules
#
# The code in this FV handles the initial firmware startup, and
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.
#
INF OvmfPkg/Sec/SecMain.inf
INF RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/ResetVector.inf
################################################################################
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
[FV.PEIFV]
OvmfPkg: add a Name GUID to each Firmware Volume The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but the detailed description can be found in Volume 3 of the Platform Init spec (which is at 1.4a currently). Adding an FvNameGuid statement to [FV.xxx] has the following effects (implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"): - The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not directly, see below). - An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to address. This object is not followed by any EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only specifies the Name GUID for the firmware volume. The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found in the Build directory as a separate file (20 bytes in size): Build/Ovmf*/*_GCC*/FV/*.ext - The new data consume 48 bytes in the following volumes: SECFV, FVMAIN_COMPACT, DXEFV. They comprise: - 16 padding bytes, - EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize fields, and Type=EFI_FV_FILETYPE_FFS_PAD), - EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above), - 4 padding bytes. (The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point immediately past EFI_FIRMWARE_VOLUME_HEADER.) The sizes of the firmware volumes don't change, only their internal usages grow by 48 bytes. I verified that the statements and calculations in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid. - The new data consume 0 bytes in PEIFV. This is because PEIFV has enough internal padding at the moment to accomodate the above structures without a growth in usage. In the future, firmware volumes can be identified by Name GUID (Fv(...) device path nodes), rather than memory location (MemoryMapped(...) device path nodes). This is supposed to improve stability for persistent device paths that refer to FFS files; for example, UEFI boot options. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-12 16:48:47 +02:00
FvNameGuid = 6938079B-B503-4E3D-9D24-B28337A25806
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
#
# PEI Phase modules
#
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
OvmfPkg: use StatusCode Router and Handler from MdeModulePkg In the Platform Init v1.4a spec, - Volume 1 "4.7 Status Code Service" defines the EFI_PEI_SERVICES.ReportStatusCode() service, - Volume 1 "6.3.5 Status Code PPI (Optional)" defines the EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above), - Volume 2 "14.2 Status Code Runtime Protocol" defines the EFI_STATUS_CODE_PROTOCOL. These allow PEIMs and DXE (and later) modules to report status codes. Currently OvmfPkg uses modules from under "IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above abstractions (PPI and PROTOCOL) directly, and write the status codes, as they are reported, to the serial port or to a memory buffer. This is called "handling" the status codes. In the Platform Init v1.4a spec, - Volume 3 "7.2.2 Report Status Code Handler PPI" defines EFI_PEI_RSC_HANDLER_PPI, - Volume 3 "7.2.1 Report Status Code Handler Protocol" defines EFI_RSC_HANDLER_PROTOCOL. These allow several PEIMs and runtime DXE drivers to register callbacks for status code handling. MdeModulePkg offers a PEIM under "MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe" that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL. MdeModulePkg also offers status code handler modules under MdeModulePkg/Universal/StatusCodeHandler/ that depend on EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively. The StatusCodeHandler modules register themselves with ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI / EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches the phase-matching ReportStatusCodeRouter module first, which in turn passes the status code to the pre-registered, phase-matching StatusCodeHandler module. The status code handling in the StatusCodeHandler modules is identical to the one currently provided by the IntelFrameworkModulePkg modules. Replace the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can decrease our dependency on IntelFrameworkModulePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com> Suggested-by: Liming Gao <liming.gao@intel.com> Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63 [jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos] Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2016-08-02 19:25:10 +02:00
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
INF OvmfPkg/PlatformPei/PlatformPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
OvmfPkg: add PEIM for providing TSEG-as-SMRAM during PEI "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" is the LockBoxLib instance with SMRAM access for the PEI phase. Said library instance must, and can, access the LockBox data in SMRAM directly if it is invoked before SMBASE relocation / SMI handler installation. In that case, it only needs PEI_SMM_ACCESS_PPI from the platform, and it doesn't depend on EFI_PEI_SMM_COMMUNICATION_PPI. OVMF satisfies the description in SVN r18823 ("MdeModulePkg: SmmLockBoxPeiLib: work without EFI_PEI_SMM_COMMUNICATION_PPI"): in OVMF, only S3Resume2Pei links against SmmLockBoxPeiLib. Therefore, introduce a PEIM that produces the PEI_SMM_ACCESS_PPI interface, enabling SmmLockBoxPeiLib to work; we can omit including "UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf". The load / installation order of S3Resume2Pei and SmmAccessPei is indifferent. SmmAccessPei produces the gEfiAcpiVariableGuid HOB during its installation (which happens during PEI), but S3Resume2Pei accesses the HOB only when the DXE IPL calls its S3RestoreConfig2 PPI member, as last act of PEI. MCH_SMRAM_D_LCK and MCH_ESMRAMC_T_EN are masked out the way they are, in SmmAccessPeiEntryPoint() and SmramAccessOpen() respectively, in order to prevent VS20xx from warning about the (otherwise fully intentional) truncation in the UINT8 casts. (Warnings reported by Michael Kinney.) Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19040 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30 19:41:38 +01:00
!if $(SMM_REQUIRE) == TRUE
INF OvmfPkg/SmmAccess/SmmAccessPei.inf
!endif
OvmfPkg: include UefiCpuPkg/CpuMpPei In the next patch we're going to put EFI_PEI_MP_SERVICES_PPI to use. CpuMpPei uses the following PCDs from gUefiCpuPkgTokenSpaceGuid, beyond those already used by CpuDxe: - PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize: these control whether CpuMpPei performs microcode update. If the region size is zero, then the microcode update is skipped. UefiCpuPkg.dec sets the region size to zero by default, which is appropriate for OVMF. - PcdCpuApLoopMode and PcdCpuApTargetCstate: the former controls how CpuMpPei puts the APs to sleep: 1 -- HLT, 2 -- MWAIT, 3 -- busy wait (with PAUSE). The latter PCD is only relevant if the former PCD is 2 (MWAIT). In order to be consistent with SeaBIOS and with CpuDxe itself, we choose HLT. That's the default set by UefiCpuPkg.dec. Furthermore, although CpuMpPei could consume SecPeiCpuExceptionHandlerLib technically, it is supposed to consume PeiCpuExceptionHandlerLib. See: - http://thread.gmane.org/gmane.comp.bios.edk2.devel/12703 - git commit a81abf161666 ("UefiCpuPkg/ExceptionLib: Import PeiCpuExceptionHandlerLib module"), part of the series linked above. Jeff recommended to resolve CpuExceptionHandlerLib to PeiCpuExceptionHandlerLib for all PEIMs: - http://thread.gmane.org/gmane.comp.bios.edk2.devel/14471/focus=14477 Since at the moment we have no resolution in place that would cover this for PEIMs (from either [LibraryClasses] or [LibraryClasses.common.PEIM]), it's easy to do. Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-06 18:09:16 +02:00
INF UefiCpuPkg/CpuMpPei/CpuMpPei.inf
################################################################################
[FV.DXEFV]
OvmfPkg: disable build-time relocation for DXEFV modules When the GenFv utility from BaseTools composes a firmware volume, it checks whether modules in the firmware volume are subject to build-time relocation. The primary indication for relocation is whether the firmware volume has a nonzero base address, according to the [FD] section(s) in the FDF file that refer to the firmware volume. The idea behind build-time relocation is that XIP (execute in place) modules will not be relocated at boot-time: - Pre-DXE phase modules generally execute in place. (OVMF is no exception, despite the fact that we have writeable memory even in SEC: PEI_CORE and PEIMs run in-place from PEIFV, after SEC decompresses PEIFV and DXEFV from FVMAIN_COMPACT (flash) to RAM. PEI_CORE and the PEIMs are relocated at boot-time only after PlatformPei installs the permanent PEI RAM, and the RAM migration occurs.) - Modules dispatched by the DXE Core are generally relocated at boot-time. However, this is not necessarily so. Quoting Liming from <https://lists.01.org/pipermail/edk2-devel/2017-July/012053.html>: > PI spec has no limitation that XIP is for PEIM only. DXE driver may be > built as XIP for other purpose. For example, if DXE driver image address > is not zero, DxeCore will try allocating the preferred address and load > it. In another case, once DXE driver is relocated at build time, DxeCore > will dispatch it and start it directly without loading, it may save boot > performance. Therefore GenFv relocates even DXE and UEFI driver modules if the containing firmware volume has a nonzero base address. In OVMF, this is the case for both PEIV and DXEFV: > [FD.MEMFD] > BaseAddress = $(MEMFD_BASE_ADDRESS) > Size = 0xB00000 > ErasePolarity = 1 > BlockSize = 0x10000 > NumBlocks = 0xB0 > ... > 0x020000|0x0E0000 > gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize > FV = PEIFV > > 0x100000|0xA00000 > gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize > FV = DXEFV While the build-time relocation certainly makes sense for PEIFV (see above), the reasons for which we specify DXEFV under [FD.MEMFD] are weaker: - we set the PcdOvmfDxeMemFvBase and PcdOvmfDxeMemFvSize PCDs here, - and we ascertain that DXEFV, when decompressed by SEC from FVMAIN_COMPACT, will fit into the area allotted here, at build time. In other words, the build-time relocation of the modules in DXEFV is a waste of resources. But, it gets worse: Build-time relocation of an executable is only possible if the on-disk and in-memory layouts are identical, i.e., if the sections of the PE/COFF image adhere to the same alignment on disk and in memory. Put differently, the FileAlignment and SectionAlignment headers must be equal. For boot-time modules that we build as part of edk2, both alignment values are 0x20 bytes. For runtime modules that we build as part of edk2, both alignment values are 0x1000 bytes. This is why the DXEFV relocation, albeit wasteful, is also successful every time. Unfortunately, if we try to include a PE/COFF binary in DXEFV that originates from outside of edk2, the DXEFV relocation can fail due to the binary having unmatched FileAlignment and SectionAlignment headers. This is precisely the case with the E3522X2.EFI network driver for the e1000 NIC, from Intel's BootUtil / PREBOOT.EXE distribution. The solution is to use the FvForceRebase=FALSE override under [FV.DXEFV]. This tells GenFv not to perform build-time relocation on the firmware volume, despite the FV having a nonzero base address. In DXEFV we also have SMM drivers. Those are relocated at boot-time (into SMRAM) unconditionally; SMRAM is always discovered at boot-time. Kudos to Ard and Liming for the PE/COFF sections & relocations explanation, and for the FvForceRebase=FALSE tip. I regression-tested this change in the following configurations (all with normal boot and S3 suspend/resume): IA32, q35, SMM, Linux IA32X64, q35, SMM, Linux IA32X64, q35, SMM, Windows-8.1 X64, i440fx, no-SMM, Linux Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Liming Gao <liming.gao@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=613 Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=615 Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com>
2017-06-28 20:20:17 +02:00
FvForceRebase = FALSE
OvmfPkg: add a Name GUID to each Firmware Volume The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but the detailed description can be found in Volume 3 of the Platform Init spec (which is at 1.4a currently). Adding an FvNameGuid statement to [FV.xxx] has the following effects (implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"): - The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not directly, see below). - An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to address. This object is not followed by any EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only specifies the Name GUID for the firmware volume. The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found in the Build directory as a separate file (20 bytes in size): Build/Ovmf*/*_GCC*/FV/*.ext - The new data consume 48 bytes in the following volumes: SECFV, FVMAIN_COMPACT, DXEFV. They comprise: - 16 padding bytes, - EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize fields, and Type=EFI_FV_FILETYPE_FFS_PAD), - EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above), - 4 padding bytes. (The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point immediately past EFI_FIRMWARE_VOLUME_HEADER.) The sizes of the firmware volumes don't change, only their internal usages grow by 48 bytes. I verified that the statements and calculations in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid. - The new data consume 0 bytes in PEIFV. This is because PEIFV has enough internal padding at the moment to accomodate the above structures without a growth in usage. In the future, firmware volumes can be identified by Name GUID (Fv(...) device path nodes), rather than memory location (MemoryMapped(...) device path nodes). This is supposed to improve stability for persistent device paths that refer to FFS files; for example, UEFI boot options. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-12 16:48:47 +02:00
FvNameGuid = 7CB8BDC9-F8EB-4F34-AAEA-3EE4AF6516A1
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI DXE {
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF OvmfPkg/AmdSevDxe/AmdSevDxe.inf
!if $(SMM_REQUIRE) == FALSE
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
!endif
}
#
# DXE Phase modules
#
INF MdeModulePkg/Core/Dxe/DxeMain.inf
OvmfPkg: use StatusCode Router and Handler from MdeModulePkg In the Platform Init v1.4a spec, - Volume 1 "4.7 Status Code Service" defines the EFI_PEI_SERVICES.ReportStatusCode() service, - Volume 1 "6.3.5 Status Code PPI (Optional)" defines the EFI_PEI_PROGRESS_CODE_PPI (equivalent to the above), - Volume 2 "14.2 Status Code Runtime Protocol" defines the EFI_STATUS_CODE_PROTOCOL. These allow PEIMs and DXE (and later) modules to report status codes. Currently OvmfPkg uses modules from under "IntelFrameworkModulePkg/Universal/StatusCode/", which produce the above abstractions (PPI and PROTOCOL) directly, and write the status codes, as they are reported, to the serial port or to a memory buffer. This is called "handling" the status codes. In the Platform Init v1.4a spec, - Volume 3 "7.2.2 Report Status Code Handler PPI" defines EFI_PEI_RSC_HANDLER_PPI, - Volume 3 "7.2.1 Report Status Code Handler Protocol" defines EFI_RSC_HANDLER_PROTOCOL. These allow several PEIMs and runtime DXE drivers to register callbacks for status code handling. MdeModulePkg offers a PEIM under "MdeModulePkg/Universal/ReportStatusCodeRouter/Pei" that produces both EFI_PEI_PROGRESS_CODE_PPI and EFI_PEI_RSC_HANDLER_PPI, and a runtime DXE driver under "MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe" that produces both EFI_STATUS_CODE_PROTOCOL and EFI_RSC_HANDLER_PROTOCOL. MdeModulePkg also offers status code handler modules under MdeModulePkg/Universal/StatusCodeHandler/ that depend on EFI_PEI_RSC_HANDLER_PPI and EFI_RSC_HANDLER_PROTOCOL, respectively. The StatusCodeHandler modules register themselves with ReportStatusCodeRouter through EFI_PEI_RSC_HANDLER_PPI / EFI_RSC_HANDLER_PROTOCOL. When another module reports a status code through EFI_PEI_PROGRESS_CODE_PPI / EFI_STATUS_CODE_PROTOCOL, it reaches the phase-matching ReportStatusCodeRouter module first, which in turn passes the status code to the pre-registered, phase-matching StatusCodeHandler module. The status code handling in the StatusCodeHandler modules is identical to the one currently provided by the IntelFrameworkModulePkg modules. Replace the IntelFrameworkModulePkg modules with the MdeModulePkg ones, so we can decrease our dependency on IntelFrameworkModulePkg. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com> Suggested-by: Liming Gao <liming.gao@intel.com> Fixes: https://tianocore.acgmultimedia.com/show_bug.cgi?id=63 [jordan.l.justen@intel.com: point out IntelFareworkModulePkg typos] Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> [lersek@redhat.com: rewrap to 74 cols; fix IntelFareworkModulePkg typos] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2016-08-02 19:25:10 +02:00
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
OvmfPkg: prevent 64-bit MMIO BAR degradation if there is no CSM According to edk2 commit "MdeModulePkg/PciBus: do not improperly degrade resource" and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the Platform Init 1.4a specification, a platform can provide such a protocol in order to influence the PCI resource allocation performed by the PCI Bus driver. In particular it is possible instruct the PCI Bus driver, with a "wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit address space, regardless of whether the device features an option ROM. (By default, the PCI Bus driver considers an option ROM reason enough for allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS binary from a combined option ROM could be dispatched, and fail to access MMIO BARs in 64-bit address space.) In platform code we can ascertain whether a CSM is present or not. If not, then legacy BIOS binaries in option ROMs can't be dispatched, hence the BAR degradation is detrimental, and we should prevent it. This is expected to conserve the 32-bit address space for 32-bit MMIO BARs. The driver added in this patch could be simplified based on the following facts: - In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence the driver will exit immediately. Therefore the driver could be omitted from the Ia32 build. - In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE was defined (because in that case the degradation would be justified). On the other hand, if CSM_ENABLE was undefined, then the driver could be included, and it could provide the hint unconditionally (without looking for the Legacy BIOS protocol). These short-cuts are not taken because they would increase the differences between the OVMF DSC/FDF files. If we can manage without extreme complexity, we should use dynamic logic (vs. build time configuration), plus keep conditional compilation to a minimum. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-05-18 20:13:41 +02:00
INF OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
OvmfPkg: add PciHotPlugInitDxe After IncompatiblePciDeviceSupportDxe, this is another small driver / protocol implementation that tweaks the behavior of the PCI bus driver in edk2. The protocol is specified in the Platform Init Spec v1.4a, Volume 5, Chapter 12.6 "PCI Hot Plug PCI Initialization Protocol". This implementation steers the PCI bus driver to reserve the following resources ("padding") for each PCI bus, in addition to the BARs of the devices on that PCI bus: - 2MB of 64-bit non-prefetchable MMIO aperture, - 512B of IO port space. The goal is to reserve room for devices hot-plugged at runtime even if the bridge receiving the device is empty at boot time. The 2MB MMIO size is inspired by SeaBIOS. The 512B IO port size is actually only 1/8th of the PCI spec mandated reservation, but the specified size of 4096 has proved wasteful (given the limited size of our IO port space -- see commit bba734ab4c7c). Especially on Q35, where every PCIe root port and downstream port qualifies as a separate bridge (capable of accepting a single device). Test results for this patch: - regardless of our request for 64-bit MMIO reservation, it is downgraded to 32-bit, - although we request 512B alignment for the IO port space reservation, the next upstream bridge rounds it up to 4096B. Cc: "Johnson, Brian J." <bjohnson@sgi.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrew Fish <afish@apple.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Suggested-by: Andrew Fish <afish@apple.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
2016-06-30 20:16:06 +02:00
INF OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF OvmfPkg/BlockMmioToBlockIoDxe/BlockIo.inf
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer. It means these drivers can be used on PCI and MMIO transport layer. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> v5: - VirtioFlush(): update comment block in VirtioLib.[hc]; error code is propagated from VirtIo->SetQueueNotify(). - VirtioBlkInit(): jump to Failed label if SetPageSize() fails - VirtioBlkInit(): fixup comment, and add error handling, near SetQueueNum() call - VirtioBlkDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE; VirtioBlkDriverBindingSupported() handles it already - VirtioNetGetFeatures(): update stale comment block - VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded loop) - VirtioNetDriverBindingStart(): remove redundant (always false) check for a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD; VirtioNetDriverBindingSupported() handles it already - VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation - VirtioNetInitialize(): fix destination error label for when SetPageSize() fails - VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ() - VirtioScsiInit(): fix destination error label for when SetPageSize() fails - VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO operation Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
2013-12-11 17:58:22 +01:00
INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
INF OvmfPkg/Virtio10Dxe/Virtio10.inf
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
INF OvmfPkg/XenIoPciDxe/XenIoPciDxe.inf
INF OvmfPkg/XenBusDxe/XenBusDxe.inf
INF OvmfPkg/XenPvBlkDxe/XenPvBlkDxe.inf
!if $(SECURE_BOOT_ENABLE) == TRUE
OvmfPkg: disable stale fork of SecureBootConfigDxe OvmfPkg forked SecureBootConfigDxe from SecurityPkg in SVN r13635 (git commit 8c71ec8f). Since then, the original (in "SecurityPkg/VariableAuthenticated/SecureBootConfigDxe") has diverged significantly. The initial diff between the original and the fork, when the fork was made (ie. at SVN r13635), reads as follows: > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr 2014-09-30 23:35:28.598067147 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr 2014-08-09 02:40:35.824851626 +0200 > @@ -51,7 +51,7 @@ > questionid = KEY_SECURE_BOOT_ENABLE, > prompt = STRING_TOKEN(STR_SECURE_BOOT_PROMPT), > help = STRING_TOKEN(STR_SECURE_BOOT_HELP), > - flags = INTERACTIVE | RESET_REQUIRED, > + flags = INTERACTIVE, > endcheckbox; > endif; > > @@ -158,7 +158,7 @@ > questionid = KEY_SECURE_BOOT_DELETE_PK, > prompt = STRING_TOKEN(STR_DELETE_PK), > help = STRING_TOKEN(STR_DELETE_PK_HELP), > - flags = INTERACTIVE | RESET_REQUIRED, > + flags = INTERACTIVE, > endcheckbox; > endif; > endform; > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.598067147 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.577067027 +0200 > @@ -1,5 +1,8 @@ > ## @file > -# Component name for SecureBoot configuration module. > +# Component name for SecureBoot configuration module for OVMF. > +# > +# Need custom SecureBootConfigDxe for OVMF that does not force > +# resets after PK changes since OVMF doesn't have persistent variables > # > # Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR> > # This program and the accompanying materials > diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c > --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.599067153 +0200 > +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.578067033 +0200 > @@ -2559,7 +2559,7 @@ > NULL > ); > } else { > - *ActionRequest = EFI_BROWSER_ACTION_REQUEST_RESET; > + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT; > } > break; The commit message is not overly verbose: OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset We don't force a platform reset for OVMF when PK is changed in custom mode setup. But the INF file hunk is telling: Need custom SecureBootConfigDxe for OVMF that does not force resets after PK changes since OVMF doesn't have persistent variables We do have persistent variables now. Let's disable the (now obsolete) OvmfPkg fork, and revert to the (well maintained) SecurityPkg-provided config driver. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Gary Lin <glin@suse.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16191 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-02 10:08:05 +02:00
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Application/UiApp/UiApp.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
OvmfPkg: enable SATA controller In this patch, we replace the traditional IDE driver stack that comes from PcAtChipsetPkg and IntelFrameworkModulePkg with more featureful drivers from OvmfPkg and MdeModulePkg. The resultant driver stack is compatible with the previous one, but provides more protocols, on more kinds of virtual hardware. Remove: - PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf (removing EFI_IDE_CONTROLLER_INIT_PROTOCOL [1]) Remove the dependent: - IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf (removing EFI_DISK_INFO_PROTOCOL [2], EFI_BLOCK_IO_PROTOCOL [3]) As replacement, add: - OvmfPkg/SataControllerDxe/SataControllerDxe.inf (supplying EFI_IDE_CONTROLLER_INIT_PROTOCOL [1]) On top of which, add the dependent: - MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf (providing EFI_ATA_PASS_THRU_PROTOCOL, EFI_EXT_SCSI_PASS_THRU_PROTOCOL) On top of which, add the dependent: - MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf (supplying EFI_DISK_INFO_PROTOCOL [2], EFI_BLOCK_IO_PROTOCOL [3], providing EFI_BLOCK_IO2PROTOCOL, EFI_STORAGE_SECURITY_COMMAND_PROTOCOL) Cc: Alexander Graf <agraf@suse.de> Cc: Reza Jelveh <reza.jelveh@tuhh.de> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Gabriel L. Somlo <somlo@cmu.edu> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de> [lersek@redhat.com: rewrote commit message] Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18532 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-22 13:18:45 +02:00
INF OvmfPkg/SataControllerDxe/SataControllerDxe.inf
INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
INF MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
!ifndef $(SOURCE_DEBUG_ENABLE)
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
!endif
INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf
INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
OvmfPkg: S3 Suspend: enable creation/saving of an S3 Boot Script "MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3 Boot Script, to be replayed in PEI during S3 Resume. The script contains opcodes and opcode arguments to configure CPU, PCI and IO resources. S3SaveStateDxe relies on the S3BootScriptLib library. The Null implementation is not useful for actually saving the boot script, we need the PiDxeS3BootScriptLib instance. The PiDxeS3BootScriptLib library instance depends on LockBoxLib, implemented for OVMF in one of the previous patches. PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null instance of the latter. It means that SMBus commands in the boot script will have no effect when interpreted during S3 Resume. This should be fine for OvmfPkg and QEMU. EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe] S3BootScriptLib [PiDxeS3BootScriptLib] SmbusLib [BaseSmbusLibNull] LockBoxLib [OvmfPkg/Library/LockBoxLib] When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely as a form of notification), the S3SaveStateDxe driver saves the boot script to EfiACPIMemoryNVS, and links it into the LockBox. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524
2014-03-04 09:03:50 +01:00
INF MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
OvmfPkg: Install BGRT ACPI table While debugging OS for ACPI BGRT support (especially on VMs), it is very useful to have the EFI firmware (OVMF in most cases which use Tianocore) to export the ACPI BGRT table. This patch tries to add this support in OvmfPkg. Tested this patch in the following environments: 1. On both RHEL7.3 and Fedora-25 VM guests running on a Fedora-24 Host: - Ensured that the BGRT logo is properly prepared and can be viewed with user-space tools (like 'Gwenview' on KDE, for example): $ file /sys/firmware/acpi/bgrt/image /sys/firmware/acpi/bgrt/image: PC bitmap, Windows 3.x format, 193 x 58 x 24 2. On a Windows-10 VM Guest running on a Fedora-24 Host: - Ensured that the BGRT ACPI table is properly prepared and can be read with freeware tool like FirmwareTablesView: ================================================== Signature : BGRT Firmware Provider : ACPI Length : 56 Revision : 1 Checksum : 129 OEM ID : INTEL OEM Table ID : EDK2 OEM Revision : 0x00000002 Creator ID : 0x20202020 Creator Revision : 0x01000013 Description : ================================================== Note from Laszlo Ersek <lersek@redhat.com>: without the BGRT ACPI table, Windows 8 and Windows 10 first clear the screen, then display a blue, slanted Windows picture above the rotating white boot animation. With the BGRT ACPI table, Windows 8 and Windows 10 don't clear the screen, the blue Windows image is not displayed, and the rotating white boot animation is shown between the firmware's original TianoCore boot splash and (optional) "Start boot option" progress bar. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> [lersek@redhat.com: cover effect on Windows 8/10 boot anim. in commit msg] Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2017-01-06 10:47:15 +01:00
INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
INF FatPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
!ifndef $(USE_OLD_SHELL)
INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
INF ShellPkg/Application/Shell/Shell.inf
!else
INF RuleOverride = BINARY EdkShellBinPkg/FullShell/FullShell.inf
!endif
INF MdeModulePkg/Logo/LogoDxe.inf
#
# Network modules
#
!if $(E1000_ENABLE)
FILE DRIVER = 5D695E11-9B3F-4b83-B25F-4A8D5D69BE07 {
SECTION PE32 = Intel3.5/EFIX64/E3522X2.EFI
}
!endif
INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
!if $(NETWORK_IP6_ENABLE) == TRUE
INF NetworkPkg/Ip6Dxe/Ip6Dxe.inf
INF NetworkPkg/TcpDxe/TcpDxe.inf
INF NetworkPkg/Udp6Dxe/Udp6Dxe.inf
INF NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
INF NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF NetworkPkg/IScsiDxe/IScsiDxe.inf
!else
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
!endif
!if $(HTTP_BOOT_ENABLE) == TRUE
INF NetworkPkg/DnsDxe/DnsDxe.inf
INF NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe.inf
INF NetworkPkg/HttpDxe/HttpDxe.inf
INF NetworkPkg/HttpBootDxe/HttpBootDxe.inf
!endif
!if $(TLS_ENABLE) == TRUE
INF NetworkPkg/TlsDxe/TlsDxe.inf
INF NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe.inf
!endif
INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
#
# Usb Support
#
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
!ifdef $(CSM_ENABLE)
INF IntelFrameworkModulePkg/Csm/BiosThunk/VideoDxe/VideoDxe.inf
INF IntelFrameworkModulePkg/Csm/LegacyBiosDxe/LegacyBiosDxe.inf
INF RuleOverride=CSM OvmfPkg/Csm/Csm16/Csm16.inf
!endif
INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
INF OvmfPkg/VirtioGpuDxe/VirtioGpu.inf
INF OvmfPkg/PlatformDxe/Platform.inf
INF OvmfPkg/AmdSevDxe/AmdSevDxe.inf
INF OvmfPkg/IoMmuDxe/IoMmuDxe.inf
!if $(SMM_REQUIRE) == TRUE
INF OvmfPkg/SmmAccess/SmmAccess2Dxe.inf
INF OvmfPkg/SmmControl2Dxe/SmmControl2Dxe.inf
2015-11-30 19:46:55 +01:00
INF UefiCpuPkg/CpuS3DataDxe/CpuS3DataDxe.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
OvmfPkg: LockBox: use SMM stack with -D SMM_REQUIRE During DXE, drivers save data in the LockBox. A save operation is layered as follows: - The unprivileged driver wishing to store data in the LockBox links against the "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf" library instance. The library allows the unprivileged driver to format requests for the privileged SMM LockBox driver (see below), and to parse responses. We apply this resolution for DXE_DRIVER modules. - The privileged SMM LockBox driver is built from "MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf". This driver has module type DXE_SMM_DRIVER and can access SMRAM. The driver delegates command parsing and response formatting to "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf". Therefore we include this DXE_SMM_DRIVER in the build, and apply said resolution specifically to it. (Including the driver requires us to resolve a few of other library classes for DXE_SMM_DRIVER modules.) - In PEI, the S3 Resume PEIM (UefiCpuPkg/Universal/Acpi/S3Resume2Pei) retrieves data from the LockBox. It is capable of searching SMRAM itself. We resolve LockBoxLib to "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" specifically for this one PEIM. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19048 6f19259b-4bc3-4df7-8a09-765794883524
2015-11-30 19:42:15 +01:00
INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
#
# Variable driver stack (SMM)
#
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
!else
#
# Variable driver stack (non-SMM)
#
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
!endif
################################################################################
[FV.FVMAIN_COMPACT]
OvmfPkg: add a Name GUID to each Firmware Volume The FDF spec mentions the FvNameGuid statement for [FV.xxxx] sections, but the detailed description can be found in Volume 3 of the Platform Init spec (which is at 1.4a currently). Adding an FvNameGuid statement to [FV.xxx] has the following effects (implemented by "BaseTools/Source/C/GenFv/GenFvInternalLib.c"): - The EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset field is set to a nonzero value, pointing after EFI_FIRMWARE_VOLUME_HEADER itself (although not directly, see below). - An EFI_FIRMWARE_VOLUME_EXT_HEADER object is created at the pointed-to address. This object is not followed by any EFI_FIRMWARE_VOLUME_EXT_ENTRY (= extension) entries, so it only specifies the Name GUID for the firmware volume. The EFI_FIRMWARE_VOLUME_EXT_HEADER for each firmware volume can be found in the Build directory as a separate file (20 bytes in size): Build/Ovmf*/*_GCC*/FV/*.ext - The new data consume 48 bytes in the following volumes: SECFV, FVMAIN_COMPACT, DXEFV. They comprise: - 16 padding bytes, - EFI_FFS_FILE_HEADER2 (8 bytes in total: no Name and ExtendedSize fields, and Type=EFI_FV_FILETYPE_FFS_PAD), - EFI_FIRMWARE_VOLUME_EXT_HEADER (20 bytes, see above), - 4 padding bytes. (The initial 16 padding bytes and the EFI_FFS_FILE_HEADER2 structure are the reason why EFI_FIRMWARE_VOLUME_HEADER.ExtHeaderOffset does not point immediately past EFI_FIRMWARE_VOLUME_HEADER.) The sizes of the firmware volumes don't change, only their internal usages grow by 48 bytes. I verified that the statements and calculations in "OvmfPkg/DecomprScratchEnd.fdf.inc" are unaffected and remain valid. - The new data consume 0 bytes in PEIFV. This is because PEIFV has enough internal padding at the moment to accomodate the above structures without a growth in usage. In the future, firmware volumes can be identified by Name GUID (Fv(...) device path nodes), rather than memory location (MemoryMapped(...) device path nodes). This is supposed to improve stability for persistent device paths that refer to FFS files; for example, UEFI boot options. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-07-12 16:48:47 +02:00
FvNameGuid = 48DB5E17-707C-472D-91CD-1613E7EF51B0
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
OvmfPkg: Split MAINFV into a separate PEI and DXE FVs By splitting the PEI and DXE phases into separate FVs, we can only reserve the PEI FV for ACPI S3 support. This should save about 7MB. Unfortunately, this all has to happen in a single commit. DEC: * Remove PcdOvmfMemFv(Base|Size) * Add PcdOvmfPeiMemFv(Base|Size) * Add PcdOvmfDxeMemFv(Base|Size) FDF: * Add new PEIFV. Move PEI modules here. * Remove MAINFV * Add PEIFV and DXEFV into FVMAIN_COMPACT - They are added as 2 sections of a file, and compressed together so they should retain good compression * PcdOvmf(Pei|Dxe)MemFv(Base|Size) are set SEC: * Find both the PEI and DXE FVs after decompression. - Copy them separately to their memory locations. Platform PEI driver: * Fv.c: Publish both FVs as appropriate * MemDetect.c: PcdOvmfMemFv(Base|Size) => PcdOvmfDxeMemFv(Base|Size) OVMF.fd before: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed MAINFV uncompressed individual PEI modules uncompressed FV FFS file compressed with PI_NONE DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed OVMF.fd after: Non-volatile data storage FVMAIN_COMPACT uncompressed FV FFS file LZMA compressed PEIFV uncompressed individual PEI modules uncompressed DXEFV uncompressed individual DXE modules uncompressed SECFV uncompressed Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15151 6f19259b-4bc3-4df7-8a09-765794883524
2014-01-21 20:39:13 +01:00
#
# These firmware volumes will have files placed in them uncompressed,
# and then both firmware volumes will be compressed in a single
# compression operation in order to achieve better overall compression.
#
SECTION FV_IMAGE = PEIFV
SECTION FV_IMAGE = DXEFV
}
}
!include DecomprScratchEnd.fdf.inc
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
}
[Rule.Common.USER_DEFINED.CSM]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.bin
}
[Rule.Common.SEC.RESET_VECTOR]
FILE RAW = $(NAMED_GUID) {
RAW BIN Align = 16 |.bin
}
[Rule.Common.SMM_CORE]
FILE SMM_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER]
FILE SMM = $(NAMED_GUID) {
SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}