from DynamicPcds: PcdCpuMaxLogicalProcessorNumber,
PcdCpuBootLogicalProcessorNumber, PcdGhcbBase,
PcdConfidentialComputingGuestAttr.
This information is now obtained from EFI_HOB_PLATFORM_INFO directly.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3223
In the current design, memory protection is not available till CpuDxe
is loaded. To resolve this, introduce CpuArchLib to move the
CPU Architectural initialization to DxeCore.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
HookAfterStubHeader is copied before execution. Thus, relative
addressing cannot safely be used for anything outside the copy range.
Fix the reference of HookAfterStubHeaderEnd to be absolute.
This change alone violates an undocumented requirement that
HookAfterStubHeader and AsmIdtVector are structurally equivalent (their
respective sizes in particular). Resolve this by treating them (and in
particular their sizes) independently.
MtrrLib does not include PcdLib.h despite explicitly using its
definitions. Add the include to fix compilation for modules that do not
utilize AutoGen.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
This change removes Xcode5ExceptionHandlerAsm and merge it's
functionality into ExceptionHandlerAsm.
Also decreases number of vectors to 32 for:
- 64-bit PeiCpuExceptionHandlerLib
- 32-bit PeiCpuExceptionHandlerLib, SecPeiCpuExceptionHandlerLib
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
For the bitfield access, MSVC apparently uses a right shift of the base type of the bitfield member. In our case, is is cased by IA32_PTE_4K and
IA32_PAGE_LEAF_ENTRY_BIG_PAGESIZE and other structures which uses uint64
bitfields and 32-bit x86 doesn't have a 64-bit integer shift (except using MMX or SSE2). With -Od (NOOPT) even for constant counts it puts
the data in EDX:EAX, the shift count in cl and calls __aullshr.
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
Add missing GDT alignment into mBuffer to prevent possible memory
corruption on ALIGN_POINTER operation on NewGdtTable
in ArchExceptionHandler
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
This reverts commit 4b7bd4c591a81a290b31e9d1a94c4b8be787989e, because it
breaks IA32 targets, at least for XCODE5, CLANGPDB and CLANGDWARF
toolchains
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
RISC-V register names do not follow the EDK2 formatting.
So, add it to ignore list for now.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This is copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe
and added the RISCV_EFI_BOOT_PROTOCOL support.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This DXE module initializes the timer interrupt handler
and installs the Arch Timer protocol.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add the RISC-V instance of the TimerLib.
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVTimerLib
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add Cpu Exception Handler library for RISC-V. This is copied
from edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVExceptionLib
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
RISC-V UEFI based platforms need to support RISCV_EFI_BOOT_PROTOCOL.
Add this protocol GUID definition and the header file required.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4246
In function InitPaging, NumberOfPml5Entries is calculated by below code
NumberOfPml5Entries = (UINTN)LShiftU64 (1, SizeOfMemorySpace - 48);
If the SizeOfMemorySpace is larger than 48, NumberOfPml5Entries will be
larger than 1. However, this doesn't make sense if the hardware doesn't
support 5 level page table.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This reverts commit 73ccde8f6d04a246377cabaed2875e69d4b6b719 since it
results in a hang of the IA32 processor and needs further clean-up.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4234
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Commit 0426115b6738 ("UefiCpuPkg: Remove unused API in
SmmCpuFeaturesLib.h", 2022-12-21) removed the declaration of the function
SmmCpuFeaturesAllocatePageTableMemory() from the "SmmCpuFeaturesLib.h"
library class header.
Remove the API's (null-)implementation from UefiCpuPkg/SmmCpuFeaturesLib
as well.
Build-tested with:
build -a IA32 -a X64 -b NOOPT -p UefiCpuPkg/UefiCpuPkg.dsc -t GCC5
Cc: Eric Dong <eric.dong@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4235
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dun Tan <dun.tan@intel.com>
When setting new page table pool to RO, only disable/enable WP when
Cr0.WP has been set to 1 to fix potential PF caused by b822be1a20
(UefiCpuPkg/PiSmmCpuDxeSmm: Introduce page table pool mechanism).
With previous code, if someone want to modify the page table and
Cr0.WP has been cleared before modify page table, Cr0.WP may be set
to 1 again since new pool may be generated during this process
Then PF fault may happens.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Simplify the code to set memory used by smm page table as RO.
Since memory used by smm page table are in PageTablePool list,
we only need to set all PageTablePool as ReadOnly in smm page
table itself. Also, we only need to flush tlb once after
setting all page table pool as Read Only.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Remove SmmCpuFeaturesAllocatePageTableMemory in this headfile.
This API is not used by PiSmmCpuDxeSmm driver any more. Also
no other files use this API.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Introduce page table pool mechanism for smm page table to simplify
page table memory management and protection. This mechanism has been
used in DxeIpl. The basic idea is to allocate a bunch of continuous
pages of memory in advance, and all future page tables consumption
will happen in those pool instead of system memory.
Since we have centralized page tables, we only need to mark all page
table pools as RO, instead of searching page table memory layer by
layer in smm page table. Once current page table pool has been used
up, another memory pool will be allocated and the new pool will also
be set as RO if current page table memory has been marked as RO.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
During the finalization of Mp initialization before booting into the OS,
depending on whether Mwait is supported or not, AsmRelocateApLoop
places Aps in MWAIT-loop or HLT-loop.
Since paging is necessary for long mode, the original implementation of
moving APs to 32-bit was to disable paging to ensure that the booting
does not crash.
The current modification creates a page table in reserved memory,
avoiding switching modes and reclaiming memory by OS. This modification
is only for 64 bit mode.
More specifically, we keep the AMD logic as the original code flow,
extract and update the Intel-related code, where the APs would stay
in 64-bit, and run in a Mwait or Hlt loop until the OS wake them up.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
AsmRelocateApLoop is replicated for future Intel Logic Extraction,
further brings AP into 64-bit, and enables paging.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=4195
1.Updated the GDT table in VTF0 to align with the one in S3Resume2Pei.
By doing so can simplify the changes to enable S3 in 64bit PEI.
2.Use SwitchStack() between PEI and SMM in S3 resume path when both
are in the same execution mode.
3.Transfer from PEI to OS waking vector by calling SwitchStack() when
both are in the same execution mode.
4.Removed the debug assertion in S3Resume.c to support 64bit PEI.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Chinni B Duggapu <chinni.b.duggapu@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
When build in DEBUG, the code asserts that 5LPage support is there
when the physical address width is larger than 48.
In a RELEASE build it will just force LA57 to 1 in CR4
even if CPUID(7).ECX[16] says it is not supported.
UefiCpuPkg: Bug fix in 5LPage handling
The hang (in the ASSERT) in DEBUG is not warranted as there are
legal configurations with CPUID(7).ECX[16](==LA57)=0
and with a physical address width of larger than 48 (like 52).
This is also supported by this code:
https://github.com/tianocore/edk2/blob/master/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c#L221
There (as long as physical address width is smaller or equal to 52)
any address width above 48 will be reduced to 48 and the
system can and will work without 5LPaging.
The forced setting of LA57 in CR4 (in the absence of LA57 in CPUID(7).ECX)
is a spec violation and should not happen.
Hence the proposed fix
a) removes the assert.
b) only returns TRUE from Is5LevelPagingNeeded if 5LPaging is actually
supported by HW.
Signed-off-by: Robert Guenzel <robert.guenzel@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4173
Due to more core count increasement, it's hard to reflect all APs
state via AP bitvector support in the register. Actually, SMM CPU
driver doesn't need to check each AP state to know all CPUs in SMI
or not, one alternative method is to check the SMM Delayed & Blocked
AP Count number:
APs in SMI + Blocked Count + Disabled Count >= All supported Aps
(code comments explained why can be > All supported Aps)
With above change, the returned value of "SmmRegSmmEnable" &
"SmmRegSmmDelayed" & "SmmRegSmmBlocked" from SmmCpuFeaturesLib
should be the AP count number within the existing CPU package.
For register that return the bitvector state, require
SmmCpuFeaturesGetSmmRegister() returns count number of all bit per
logical processor within the same package.
For register that return the AP count, require
SmmCpuFeaturesGetSmmRegister() returns the register value directly.
v3:
- Refine the coding style
v2:
- Rename "mPackageBspInfo" to "mPackageFirstThreadIndex"
- Clarify the expected value of "SmmRegSmmEnable" & "SmmRegSmmDelayed" &
"SmmRegSmmBlocked" returned from SmmCpuFeaturesLib.
- Thread: https://edk2.groups.io/g/devel/message/96722
v1:
- Thread: https://edk2.groups.io/g/devel/message/96671
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
The code changes develop UEFI application and dynamic command for
EfiMpServiceProtocol unit tests based on current UnitTestFramework.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Move the implementation of EfiMpServiceProtocol unit tests in a separate
function in preparation for developing the UEFI application and dynamic
command for the same unit tests.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
APIs which are defined in CcExitLib.h are added with the CcExit prefix.
This is to make the APIs' name more meaningful.
This change impacts OvmfPkg/UefiCpuPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
VmgExitLib once was designed to provide interfaces to support #VC handler
and issue VMGEXIT instruction. After TDVF (enable TDX feature in OVMF) is
introduced, this library is updated to support #VE as well. Now the name
of VmgExitLib cannot reflect what the lib does.
This patch renames VmgExitLib to CcExitLib (Cc means Confidential
Computing). This is a simple renaming and there is no logic changes.
After renaming all the VmgExitLib related codes are updated with
CcExitLib. These changes are in OvmfPkg/UefiCpuPkg/UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4140
Some implementations may need to keep the initial Reset code to be
separated out from rest of the code.This request is to add padding at
lower 4K region below 4 GB which will result having only few jmp
instructions and data at that region.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Duggapu Chinni B <chinni.b.duggapu@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
Remove the header files those are already included in
CpuFeatureLib.h.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
This change stripped away the code that can be
shared with other archs or vendors from Intel
implementation and put in to the common file,
leaves the Intel X86 implementation in the
IntelSmmCpuFeatureLib. Also updates the header
file and INF file.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
Rename SmmCpuFeaturesLiCommon.c to
IntelSmmCpuFeaturesLib, because it was developed
specifically for Intel implementation. The code
that can be shared by other archs or vendors
will be stripped away and put in the common
file in the next patch.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Disable/Restore HpetTimer before and after running the Dxe
CpuExceptionHandlerLib unit test module. During the UnitTest, a
new Idt is initialized for the test. There is no handler for timer
intrrupt in this new idt. After the test module, HpetTimer does
not work any more since the comparator value register and main
counter value register for timer does not match. To fix this issue,
disable/restore HpetTimer before and after Unit Test if HpetTimer
driver has been dispatched. We don't need to send Apic Eoi in this
unit test module.When disabling timer, after RaiseTPL(), if there
is a pending timer interrupt, bit64 of Interrupt Request Register
(IRR) will be set to 1 to indicate there is a pending timer
interrupt. After RestoreTPL(), CPU will handle the pending
interrupt in IRR.Then TimerInterruptHandler calls SendApicEoi().
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
The code changes add unit tests based on current UnitTestFramework.
EdkiiPeiMpServices2PpiPeiUnitTest PEI module is used to test
EdkiiPeiMpServices2Ppi and EfiMpServiceProtocolDxeUnitTest DXE driver is
used to test EfiMpServiceProtocol.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add GENERAL_REGISTER.R8/R9 etc in EccCheck ExceptionList
of UefiCpuPkg/UefiCpuPkg.ci.yaml to pass CI EccCheck.R8/R9
in structure GENERAL_REGISTER of CpuExceptionHandlerTest.h
lead to EccCheck failure since no lower case characters in
R8/R9/R10 etc.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add Pei/DxeCpuExceptionHandlerLibUnitTest module in UefiCpuPkg.dsc
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
