1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
After commit 20ddbc133f
* MdeModulePkg/ConSplitter: ReadKeyStrokeEx always return key state
When one physical console supports to report the shift key state,
the key data returned from ConSplitter driver at least carries
the shift key valid bit.
The patch fixes the edit/hexedit to accept Unicode (1) when
the no shift key is pressed or reported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=682
Edit and HexEdit commands assume that SimpleTxtIn translates
Ctrl+<Alpha-Key> key combinations into Unicode control characters
(0x1-0x1A).
Such translation does not seem to be required by the UEFI spec.
Shell should not rely on implementation specific behavior.
It should instead use SimpleTextInEx to read Ctrl+<Alpha-Key> key
combinations.
The patch changes edit and hexedit to only consumes SimpleTextInEx
so that the implementation specific behavior dependency is removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Felix <felixp@mail.ru>
Cc: Felix <felixp@mail.ru>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
HDiskImageSetDiskNameOffsetSize() and HFileImageSetFileName()
may be called using the current disk name or file name.
When this happens, today's implementation firstly frees the memory
and then accesses the just-freed memory.
The patch fixes this issue by doing nothing when the disk or file
name is the current one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The original code uses PciRootBridgeIo for memory access.
It worked before MdeModulePkg/PciHostBridgeDxe driver was checked in.
But MdeModulePkg/PciHostBridgeDxe adds checks to ensure the MMIO
access request is in the scope of the current RootBridgeIo instance.
It causes "hexeditor -m 0 2" reports error because memory address 0
surely is not in the scope of any RootBridgeIo instance.
In fact only accessing the MMIO space occupied by the RootBridgeIo
can work.
The patch changes hexeditor to use CpuIo for memory access.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
As the shell inverts foreground and background it needs to be sure that it properly masks off the reserved bits and this is important since the foreground and background are not the same numbers of bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15681 6f19259b-4bc3-4df7-8a09-765794883524
Currently hexedit thinks all files that are non-existent (i.e. new) or empty must be a memory error since the pointer is checked, but the file size is not referenced.
Signed-off-by: jcarsey
Reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12797 6f19259b-4bc3-4df7-8a09-765794883524
This adds lots of pointer verification with ASSERTs only used when the condition should be impossible and never for memory allocation.
signed-off-by: jcarsey
reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12524 6f19259b-4bc3-4df7-8a09-765794883524
This adds lots of pointer verification with ASSERTs only used when the condition should be impossible and never for memory allocation.
signed-off-by: jcarsey
reviewed-by: geekboy15a
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12523 6f19259b-4bc3-4df7-8a09-765794883524
* Add Ctrl based hotkey alternatives to function hotkeys.
* Update help menu for hexedit.
Signed-off-by: kidzyoung
Reviewed-by: jljusten
Reviewed-by: jcarsey
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12082 6f19259b-4bc3-4df7-8a09-765794883524
* Add Ctrl-E hotkey for help
* Add Ctrl based hotkey alternatives to function hotkeys
* Don't show hotkey help on the main screen
* Change the file buffer's row count for display to adjust the new screen format
* Change the edit status bar location, the new edit status bar is in the last line
* Change the location of the edit bar, the new edit input bar is in the last line
Signed-off-by: kidzyoung
reviewed-by: jcarsey
reviewed-by: jljusten
reviewed-by: jiang
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12036 6f19259b-4bc3-4df7-8a09-765794883524
update connect and reconnect to account for ignoring the child handle in the connect operation.
update disconnect to output correctly.
hexedit corrected to properly display status bar and title bar and refresh when required.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11525 6f19259b-4bc3-4df7-8a09-765794883524
Michael D Kinney
Liming Gao
Ruiyu Ni
Hao Wu
Chen A Chen
Jordan Justen
Tapan Shah
Qiu Shumin
jcarsey
Samer El-Haj-Mahmoud elhaj
Jaben Carsey
Tian, Hot
jcarsey
lzeng14
ydong10
hhtian
jljusten
andrewfish