REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2416
Replaces the hardcoded value of 0xB2 with a PCD for the SMI port access
operation region. This allows platforms to customize the IO port value if
necessary.
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Fix various typos in documentation, comments and debug strings.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-66-philmd@redhat.com>
[lersek@redhat.com: replace EFI_D_xxx w/ DEBUG_xxx to shut up PatchCheck]
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
Use EV_EFI_PLATFORM_FIRMWARE_BLOB2 if the TCG PFP revision is >= 105.
Use FvName as the description for the FV.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
The TCG2 DXE supports to parse the 800-155 event GUID from PEI
and puts to the beginning of the TCG2 event.
The TCG2 DXE also supports a DXE driver produces 800-155 event
and let TCG2 DXE driver record.
The 800-155 is a NO-ACTION event which does not need extend
anything to TPM2. The TCG2 DXE also supports that.
Multiple 800-155 events are supported. All of them will be put
to the beginning of the TCG2 event, just after the SpecId event.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1940
According to TCG PFP specification: the ACPI table must be
measured prior to any modification, and the measurement
must be same cross every boot cycle.
There is a fix 3a63c17ebc
for the HID data. However that is not enough.
The LAML/LASA and PCD configuration change may also cause
similar problem.
We need measure the table before any update.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
We have discussed in this thread.
https://edk2.groups.io/g/devel/topic/32205028
Before the change, TPM FW upgrade will impact TPM2 ACPI PCR value because
TPM2 ACPI HID include FW version.
This change make the measurement before TPM2 HID fixup. So, after TPM FW
upgrade, the ACPI PCR record remains the same.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2265
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update DEBUG() macro to use DEBUG_INFO to address PatchCheck.py error.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
commit a7e2d20193 introduces the code to
get PcdTpm2AcpiTableRev in the driver entry point. This PCD is designed as
DynamicHii or DynamicHiiEx PCD. So, this PCD depends on Variable service.
To make sure PcdTpm2AcpiTableRev value be got, add Variable service as Depex.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: jiewen Yao <jiewen.yao@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are all in Unload() functions, which are probably exercised
infrequently. Fix the UninstallMultipleProtocolInterfaces() calls.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Common definitions are not consumed by VFR. They are not required to be
defined in Tcg2ConfigNvData.h with WA way. New shared internal header
file is added to include those common definitions.
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1801
Add a PCD for skipping password prompt in device unlocked status.
Previous change only support if storage device is in locked status.
This change is added to support the case that security status of the
storage device is unlocked.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
After change behavior to send BlockSid command at EndOfDxe point,
check device ownership command will return un-authority error, it
finally caused opal driver can't show "Enable Feature" menu.
Update the code logic to send detect device ownership command
before send BlockSID command.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
Change Send BlockSID command time from ReadyToBoot to
EndOfDxe.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1753
Add pop-up warning messages before secure erase action.
In order to notify user the secure erase action will take a longer time.
This change also fix some pop-up windows are unable to show up
complete message due to some strings are too long.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1511
Currently the TCG config setup form defaults the physical presence action to
PHYSICAL_PRESENCE_ENABLE, this prevents the action from being called. When a TPM
1.2 device is in Disabled and Activated state it is not possible to issue the
PHYSICAL_PRESENCE_ENABLE using the menu action.
By having the form default to PHYSICAL_PRESENCE_NO_ACTION, the user is now able
to select PHYSICAL_PRESENCE_ENABLE and toggle the TPM 1.2 device enable state.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1503
A pointer variable should be checked if it is NULL or Valid before
using it.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1506
Updated some descriptions on SETUP page to avoid user confusion.
Currently it shows "1.0 UEFI Opal Driver", however it may be mislead user to think
it is only for Opal drive but not for Pyrite drive.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1484
Add a PCD for skipping password prompt and device unlock flow.
so that other pre-OS applications are able to take over Opal
devices unlock flow.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1421
"revert action will take long time..." warning should be removed
from pop up message when keep user data selected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Addressed warnings and remarks reported by IASL.EXE. Some methods had
unused arguments. A method was returning a value when it should not.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Rydman <thomas.j.rydman@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Now that Itanium support has been dropped, we can remove the various
occurrences of the ELILO on Itanium PE/COFF header workaround.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=816
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Add an example case for the usage of
PERF_CALLBACK_BEGIN/PERF_CALLBACK_END
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang<chao.b.zhang@intel.com>
Add more logic to filter invalid function parameter in MOR Control SMI handler
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
"Triggle" is a typo. Replace it with "Trigger"
Cc: Long Qin <qin.long@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
When user input error password exceed the max allowed times, opal device
will return Invalid type error code even user input the correct password.
In this case, opal driver needs to force user shutdown the system before
let user input new password.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cache TPM interface type info to avoid excessive interface ID register read
Cc: Long Qin <qin.long@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Update package format info in _PRS to TcgNvs after memory is allocated.
Change-Id: Icfadb350e60d3ed2df332e92c257ce13309c0018
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Long Qin <qin.long@intel.com>
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
For no warning message when do the PSID revert action, the
message in the popup dialog is not enough. The error use
of NULL for CreatePopUp function caused this regression.
This change fixed it.
Passed Unit Test:
1. Check PSID revert with/without warning message cases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
According to UEFI spec, the RouteConfig protocol function should populate
the Progress pointer with an address inside Configuration. This patch
ensures that these functions are compliant when EFI_NOT_FOUND is returned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current code uses string length as BufferSize input to UnicodeSPrint,
it is wrong and makes the pop up string trimmed. The BufferSize input
to UnicodeSPrint should be the size, in bytes, of the output buffer.
This is to use sizeof (mPopUpString) as the BufferSize input to
UnicodeSPrint, it also updates array size of mPopUpString from 256 to
100 that is enough, otherwise the pop up string may be too long.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Michael Kubacki
GuoMinJ
Antoine Coeur
Jiewen Yao
Derek Lin
Chu, Maggie
Sean Brogan
Michael D Kinney
Liming Gao
Laszlo Ersek
Chu, Maggie
Joe Richey
Eric Dong
Zhichao Gao
Hao Wu
Gonzalez Del Cueto, Rodrigo
Bret Barkelew
Zhang, Chao B
Star Zeng
Chen A Chen
shenglei
Ard Biesheuvel
Dandan Bi
Thomas Palmer