The RamDiskDxe now will report RAM disks with reserved memory type to NFIT
in the ACPI table.
This commit will also make sure that an NVDIMM root device exists in the
\SB scope before reporting any RAM disk to NFIT.
To properly report the NVDIMM root device, one will need to append the
following content in the [Rule.Common.DXE_DRIVER] field in platform FDF
files:
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This adds a partial stack dump (256 bytes at either side of the stack
pointer) to the CPU state dumping routine that is invoked when taking an
unexpected exception. Since dereferencing the stack pointer may itself
fault, ensure that we don't enter the dumping routine recursively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
The default exception handler, which is essentially the one that is invoked
for unexpected exceptions, ends with an ASSERT (FALSE), to ensure that
execution halts after dumping the CPU state. However, ASSERTs are compiled
out in RELEASE builds, and since we simply return to wherever the ELR is
pointing, we will not make any progress in case of synchronous aborts, and
the same exception will be taken again immediately, resulting in the string
'Exception at 0x....' to be printed over and over again.
So use an explicit deadloop instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
when there's no volume label 'Info' can be NULL
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For Pyrite SSC device, it may not supports Active Key, So
add check logic before enable it.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch is used to cleanup unused structure
definition.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Before switch to a bus mode, we need check if the SD device supports
this bus mode.
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
The original code is using ADMA mode to do clock tuning procedure. It
may have problem on some SD/MMC host controllers as there is no way to
know when to send next tuning cmd.
Update it to PIO mode to strictly follow SD Host Controller Simplified
Specification 3.0 Figure 2-29. By this way, if the Buffer Read Ready
interrupt is set, we could know it's ok to send the next clock tuning
cmd.
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
The original code has a bug to calculate which clock freq should be
used when the target clock freq is larger than the BaseClock Freq
provided by the system.
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Check if the card is identified/initialized correctly. if not, break
the following cmd execution through PassThru()/ResetDevice().
Cc: Wu, Hao A <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Based on OvmfPkg commit 79c098b6d2.
Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that
ArmVirtPkg is less widely used by non-developers than OvmfPkg.
ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg.
About this patch:
- DxeServicesLib and SortLib are resolved generally (they have broad
client module type lists).
- ReportStatusCodeLib is resolved for UEFI_APPLICATION modules.
- GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib
and PlatformBootManagerLib, and resolved from under MdeModulePkg and
ArmVirtPkg, respectively.
- QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance.
- FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by
BootMaintenanceManagerUiLib, which we link into UiApp.
- PcdBootManagerMenuFile carries the FILE_GUID of
"MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from
"MdeModulePkg/MdeModulePkg.dec" points to
"MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf",
which, according to the commit that introduced it (a382952f82), only
'provides a very simple UI showing all the boot options recorded by
"BootOrder" and user can select any of them to boot'.
- Include the new core BDS driver, and include the boot manager
application, with the usual main menu entries.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: https://github.com/tianocore/edk2/issues/83
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
UefiBootManagerLib does not provide these functions, we have to implement
them. (EnableQuietBoot() puts up the nice TianoCore logo.)
OvmfPkg commits 817fb3ac2a and 8e8fd30377 have extracted these
functions already,
- from "IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c"
- to "OvmfPkg/Library/PlatformBootManagerLib/QuietBoot.c".
Copy the latter file, with minimal changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
QemuBootOrderLib can only filter out and reorder boot options; it cannot
create boot options. It relies on Platform BDS to auto-generate all
possible boot options first (for example, for new virtual devices that
have been configured since the last run of the virtual machine). Then it
will decide, case-by-case, whether each of those auto-generated boot
options should be preserved (and at what position), or removed.
Thus far, the only implementation of SetBootOrderFromQemu(), used in
connection with IntelFrameworkModulePkg BDS, has expected said complete
boot option list as an input parameter:
BdsEntry() [IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c]
// create empty list
InitializeListHead (
&BootOptionList
)
PlatformBdsPolicyBehavior( [ArmVirtPkg/Library/PlatformIntelBdsLib/IntelBdsPlatform.c]
BootOptionList
)
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(
BootOptionList
)
// at this point, BootOptionList starts with the preexistent boot
// options, and ends with the auto-generated options
SetBootOrderFromQemu( [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
BootOptionList
)
// write out changed boot order to UEFI variables
// The "BootOrder" variable may have changed. Refresh BootOptionList
// from it, and return it to BdsEntry().
With MdeModulePkg BDS, a BootOptionList is not propagated from BdsEntry()
to SetBootOrderFromQemu() and back. All processing is based directly on
the underlying "BootOrder" and "Boot####" variables.
In OvmfPkg, commit d27ec22d11 introduced a new instance of
QemuBootOrderLib, called QemuNewBootOrderLib. It is based on
UefiBootManagerLib, and rather than taking a complete BootOptionList as a
parameter, it expects that the "BootOrder" and "Boot####" variables are
complete in the above sense.
Rebase the boot order manipulation to UefiBootManagerLib and
QemuNewBootOrderLib, while keeping the requirement satisfied, like this:
BdsEntry() [MdeModulePkg/Universal/BdsDxe/BdsEntry.c]
PlatformBootManagerAfterConsole() [ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c]
EfiBootManagerConnectAll()
EfiBootManagerRefreshAllBootOption()
// at this point all auto-generated options exist at the end of
// "BootOrder"
SetBootOrderFromQemu() [OvmfPkg/Library/QemuNewBootOrderLib/QemuBootOrderLib.c]
// read boot options from "BootOrder" and "Boot####", then
// manipulate them
This patch parallels OvmfPkg commit 04fe914ba5.
Once the USE_OLD_BDS fallback is removed from OvmfPkg, the parameter list
of the SetBootOrderFromQemu() prototype can be updated to VOID.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Register the Enter key as the continue key (hot key to skip the boot
timeout). Map the F2 and ESC keys to the UI. Register the memory-mapped
Shell boot option.
The patch parallels OvmfPkg commit 07dd96e820. The
PlatformRegisterFvBootOption() and PlatformRegisterOptionsAndKeys()
functions are copied almost verbatim. The only changes are: internal
linkage for these functions (i.e., STATIC), and mentioning the ESC key in
the comments.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
MdeModulePkg/BDS doesn't launch the UI (Boot Manager Menu) from the
platform side. The platform is expected to store the boot timeout only, in
PcdPlatformBootTimeOut. This is usually done in
PlatformBootManagerBeforeConsole().
(ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg, not ArmVirtPkg.)
The patch parallels OvmfPkg commit 8dc0f0a6aa.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
With IntelFrameworkModulePkg BDS, the platform code is responsible for
updating console variables (e.g., with BdsLibUpdateConsoleVariable()), and
then connecting them (e.g., with BdsLibConnectAllDefaultConsoles()). This
is usually (although not necessarily) done in PlatformBdsPolicyBehavior().
With MdeModulePkg BDS, the platform is responsible for updating the
console variables in PlatformBootManagerBeforeConsole(). When that
function returns, BdsEntry() will automatically connect the consoles; the
platform is not responsible for the connection.
IntelFrameworkModulePkg MdeModulePkg
BdsEntry BdsEntry
PlatformBdsInit PlatformBootManagerBeforeConsole
+----> EfiBootManagerUpdateConsoleVariable
|
dispatch Driver#### | dispatch Driver####
| +> connect consoles
| |
PlatformBdsPolicyBehavior | | PlatformBootManagerAfterConsole
BdsLibUpdateConsoleVariable <--+ |
BdsLibConnectAllDefaultConsoles <+
display splash screen display splash screen
Thus, move the console variable massaging from the beginning of
PlatformBootManagerAfterConsole() (originally PlatformBdsPolicyBehavior())
to the end of PlatformBootManagerBeforeConsole(), and drop the explicit
BdsLibConnectAllDefaultConsoles() call.
This patch parallels OvmfPkg commit e9e9ad644f.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
The general BDS helper functions are now provided by MdeModulePkg's
UefiBootManagerLib, and no longer by IntelFrameworkModulePkg's
GenericBdsLib.
This patch parallels OvmfPkg commit 2b23b8d45b.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
In this rather mechanical patch, we replace the calls to GenericBdsLib's
BdsLibUpdateConsoleVariable() with calls to UefiBootManagerLib's
EfiBootManagerUpdateConsoleVariable(), which has the same purpose.
The latter uses CONSOLE_TYPE enum constants from
"MdeModulePkg/Include/Library/UefiBootManagerLib.h", for identifying the
console type / underlying UEFI variable in the first parameter.
This patch parallels OvmfPkg commit 9dc08ec657.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
"IntelFrameworkModulePkg/Include/Library/PlatformBdsLib.h" declares the
following interfaces:
- PlatformBdsInit
- PlatformBdsPolicyBehavior
- PlatformBdsBootFail
- PlatformBdsBootSuccess
- PlatformBdsLockNonUpdatableFlash
- LockKeyboards
From these, we've been using PlatformBdsInit() and
PlatformBdsPolicyBehavior().
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h" declares the three
interfaces below:
- PlatformBootManagerBeforeConsole
- PlatformBootManagerAfterConsole
- PlatformBootManagerWaitCallback
Comparing the BdsEntry() functions between
- "IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" and
- "MdeModulePkg/Universal/BdsDxe/BdsEntry.c",
we can establish the following mapping:
IntelFrameworkModulePkg MdeModulePkg
BdsEntry() BdsEntry()
PlatformBdsInit() <--------------> PlatformBootManagerBeforeConsole()
dispatch Driver#### <--------------> dispatch Driver####
connect consoles
PlatformBdsPolicyBehavior() <------> PlatformBootManagerAfterConsole()
The difference in connecting the consoles will be addressed in a later
patch, now we just rename the functions according to the mapping above,
and copy the call site comments from MdeModulePkg's BdsEntry().
For the third interface, PlatformBootManagerWaitCallback(), add an empty
implementation (and copy the comment from the library class header).
Platform BDS can use this callback to draw a progress bar, for example.
This patch parallels OvmfPkg commit a7566234e9.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Create a copy of PlatformIntelBdsLib under the name
PlatformBootManagerLib, with the following initial changes:
- replace PlatformBdsLib references with PlatformBootManagerLib in
comments,
- replace "IntelBdsPlatform" with "PlatformBm" in file names and their
references,
- generate a new FILE_GUID.
PlatformBootManagerLib will be linked into the BDS driver from
MdeModulePkg.
This patch parallels OvmfPkg commit 3054188189.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
The binaries of ShellBinPkg are generated with ShellPkg project d454c18a31.
The binaries are built with no debug information by building with "RELEASE" target.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Make sure "File" field is not overloaded to carry other DHCP options before use
it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Make sure "File" field is not overloaded to carry other DHCP options before use
it in HTTP boot driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Make sure "BootFileName" is not overloaded before use it in PXE driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenzhihui <chenzhihui4@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
We always need to call EfiBootManagerFreeLoadOption because the memory allocated
for NewOption (description and device path) is no longer needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
In current code will always call submit callback function,
but we should call submit callback function when has no failure
in the submit action. This patch to fix this issues.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When RouteConfig function fail in SubmitForForm or SubmitForFormSet
function, we should restore the question value base on the failure
information, should not restore all the question.
This patch to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This issue can be reproduced by the following steps:
1. Boot to HTTP boot option and the boot file is a ISO file like Ubuntu PE image.
2. Exit from boot option (GRUB) and then back to boot manager menu.
3. Boot to the same HTTP boot option again or a HTTP boot option pointing to the same HTTP ISO file. It will fail to boot.
Root cause:
When booting a HTTP boot option, the HTTP boot driver will save the Boot File's information in its private data as cache data for skipping the Boot file discovery from next time boot. However, the cache data doesn't include ImageType data, which would cause HTTP boot driver using the invalid ImageType (ImageTypeMax) and then fail to boot the cached boot file. In other words, for the second time boot, the HttpBootLoadFile() doesn't update ImageType (it returns a valid ImageType), which causes that the HttpBootDxeLoadFile() skips to Register a RAM Disk for downloaded HTTP ISO file and then BDS code can't find the RAM disk to boot.
Solution:
Save ImageType to private data for next time HTTP boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The "IoAlign" field in EFI_BLOCK_IO_MEDIA of an NVMe device is not
initialized properly, leading to a zero value for this field.
It should be initialized from the "IoAlign" field in the
EFI_NVM_EXPRESS_PASS_THRU_MODE structure maintained by the NVMe
controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some UNDI drivers may not support the cable detect in UNDI INITIALIZE command,
but support the media present check in UNDI GET_STATUS command. Current SNP
driver will set the MediaPresentSupported field to FALSE in EFI_SIMPLE_NETWORK_MODE
for such case, which forbid the media detect from the callers.
This patch updates the SNP driver to support such kind of UNDIs for media detect.
MediaPresentSupported will be set to TRUE, and a GET_STATUS command will be issued
immediately after INITIALIZE command in SNP->Initialize() function, to refresh
the value of MediaPresent in SNP mode data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Use the serial drivers which update the serial PCDs from
PlatformHookLib.
Change-Id: Ie6a3526d56332ee1cf07edb24ff39634a981183f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Copy the driver from MdeModulePkg/Universal/SerialDxe. Add
PlatformHookLib to the Library section of the .inf file to adjust the
PCDs for the UART.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Copy the driver from MdeModulePkg/Bus/Pci/PciSioSerialDxe. Add
PlatformHookLib to the Library section of the .inf file to adjust the
PCDs for the UART.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add a define and use it with MaxLogicalProcessorNumber to enable this
PCD to be changed via the command line. Quark needs to set this value
to one during the builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Allow the serial port configuration to be overriden from the command
line.
Make the debug serial PCDs patchable in module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add all of the shell options from ShellBinPkg including building the
shell from source.
Enable link time optimization for GCC debug builds to keep the size
under 0x3e0000.
Test: Use -DSHELL_TYPE=BUILD_SHELL command line options to build the
shell from source. Run the result on Galileo Gen2.
Change-Id: I1e12adb57960ac5e75e682073540a9322aa03081
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove the PlatformFlashEraseWrite function which is not used within
CorebootPayloadPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
The USB flash drive with Vendor ID 0x1516 (CompUSA) and Product ID 0x6221
returns a broken "Supported VPD Pages" VPD page. In particular, the
PageLength field has the invalid value 0x0602 (decimal 1538).
This prevents the loop from terminating that scans for the Block Limits
VPD page code in ScsiDiskInquiryDevice():
for (Index = 0; Index < PageLength; Index++) {
because the Index variable has type UINT8, and it wraps from 255 to 0,
without ever reaching PageLength (1538), and because
EFI_SCSI_PAGE_CODE_BLOCK_LIMITS_VPD does not occur at offsets 0 through
255.
* The fix is not to change the type of Index to UINT16 or a wider type.
Namely, section
7.8.14 Supported VPD Pages VPD page
in the "SCSI Primary Commands - 4" (SPC-4) specification names the
following requirement:
The supported VPD page list shall contain a list of all VPD page codes
(see 7.8) implemented by the logical unit in ascending order beginning
with page code 00h.
Since page codes are 8-bit unsigned quantities, it follows that the
maximum size for the Supported VPD Pages VPD page is 0x100 bytes, in
which every possible page code (0x00 through 0xFF) will be found, before
the UINT8 offset wraps around.
(EFI_SCSI_SUPPORTED_VPD_PAGES_VPD_PAGE.SupportedVpdPageList is correctly
sized as well, in "MdePkg/Include/IndustryStandard/Scsi.h".)
* Instead, add sanity checks that enforce the above requirement. If the
device breaks the spec, simply fall back to the "Block Limits page
absent" case.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1330955
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The BlockSid feature is not depend on lock status,
so move the send BlockSid command out of unlock process.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
BlockSid feature can be retrieve from the header info.
Update the logic, check BlockSid capability before use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Hao Wu
Ard Biesheuvel
Feng Tian
Michael Zimmermann
Dong, Eric
Jiaxin Wu
Laszlo Ersek
Qiu Shumin
Fu Siyuan
Heyi Guo
Dandan Bi
Yonghong Zhu
Sunny Wang
Leahy, Leroy P