Added SMBIOS 3.0 support in dmdem Shell command since SMBIOS 3.0 uses a different GUID in the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18506 6f19259b-4bc3-4df7-8a09-765794883524
Take the range in the resource descriptor HOB for the memory region described
by the PHIT as higher priority if it is big enough. It can make the memory bin
allocated to be at the same memory region with PHIT that has more better compatibility
to avoid memory fragmentation for some code practices assume and allocate <4G ACPI memory.
Also let the minimal memory size needed include the total memory bin size needed to
make sure memory bin could be allocated successfully.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18503 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix GCC build fail.
2. It's not correct to cast away constness to allow TrimSpaces() to modify 'commandline'.
This patch makes a copy of 'commandLine' and work with that in the remainder of the function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18500 6f19259b-4bc3-4df7-8a09-765794883524
The HOB List relocation should be at after all the tested memory resources added
(except the memory space that covers HOB List) to the memory services,
because the memory resource found in CoreInitializeMemoryServices()
may have not enough remaining resource for HOB List.
And the memory space that covers HOB List should be processed
after HOB List relocation to avoid the resources allocated by others
to corrupt HOB List before its relocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18499 6f19259b-4bc3-4df7-8a09-765794883524
The pointer to the destination string changed,the max length also changed.Previous change neglect this point.
And base on the code logic,we can use StrCatS to replace StrCpyS.Now this patch is to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18497 6f19259b-4bc3-4df7-8a09-765794883524
SmmServicesTableLib instance only supports DXE_SMM_DRIVER type drivers that
will be loaded into SMM range. InSmm() could return TRUE directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18495 6f19259b-4bc3-4df7-8a09-765794883524
When execute a command with tailing blank spaces in ShellProtocol.Execute() Shell will fail.
This patch move the TrimSpaces operation into ParseCommandLineToArgs function to fix the problem.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yang Jadis <jadis.yang@intel.com>
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18491 6f19259b-4bc3-4df7-8a09-765794883524
This patch is used to fix connection failure issue after correct the SPD
and re-enable IPsec. The driver should not update the SadEntry's SpdSelector
when doing SpdEntry modification. SadEntry's SpdSelector may not equal to
this edited SpdEntry’s Selector.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18484 6f19259b-4bc3-4df7-8a09-765794883524
Fix a bug that the TrafficDirection field is not saved in IPsecConfig.SetData.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18483 6f19259b-4bc3-4df7-8a09-765794883524
This patch enhances the NULL pointer check of the HttpInstance->RemoteHost
pointer before dereference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18482 6f19259b-4bc3-4df7-8a09-765794883524
Fix the code to use PcdShellFile instead of using hard code GUID
which always points to new UEFI shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18478 6f19259b-4bc3-4df7-8a09-765794883524
Some of the TPM/TPM2 DEBUG messages are at EFI_D_INFO level,
even though they are simply tracing functions that run on every boot even
if there is no TPM installed. Changed verbosity to EFI_D_VERBOSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: "Jiewen Yao" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18476 6f19259b-4bc3-4df7-8a09-765794883524
Certain PCI device may have capability pointing to itself.
Update LocateCapabilityRegBlock() to break when detecting such loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18473 6f19259b-4bc3-4df7-8a09-765794883524
(PcdSetNxForStack == TRUE) breaks a number of GRUB versions that, it turns
out, are still widely in use. Disable PcdSetNxForStack by default for now.
QEMU users can enable it dynamically using the micro-feature added in the
previous patch.
Reported-by: Anthony Perard <anthony.perard@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18472 6f19259b-4bc3-4df7-8a09-765794883524
Control them with:
-fw_cfg name=opt/ovmf/PcdPropertiesTableEnable,file=no.txt \
-fw_cfg name=opt/ovmf/PcdSetNxForStack,file=yes.txt
where the contents of the text files can be
[0nN1yY](\n|\r\n)?
The macro trickery is not optimal, but it is caused by PcdSetBool(), which
is itself a macro, and can only take open-coded PCD names (ie. no
variables, like function parameters).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18471 6f19259b-4bc3-4df7-8a09-765794883524
Since PcdPropertiesTableEnable is used by the DXE Core (in the
InstallPropertiesTable() function, which runs at End-of-Dxe), we must also
change the PcdLib class resolution for that module, from the default
BasePcdLibNull to DxePcdLib.
Traditionally we've considered the DXE Core to be incapable of accessing
dynamic PCDs -- the PCD PPI is not available any longer to the DXE Core,
and the PCD Protocol is not available to it *yet*. There are exceptions
however: if the DXE Core can ensure, by whatever means, that the PCD
Protocol *is* available, then DxePcdLib will just work (the latter even
lists DXE_CORE as an allowed client module type). Namely, DxePcdLib looks
up the PCD Protocol dynamically, on the first library call that actually
needs it (for accessing a dynamic PCD); the lookup doesn't occur in a
library constructor.
And because the DXE Core fetches PcdPropertiesTableEnable at End-of-Dxe,
the PCD Protocol is definitely available then.
In addition, we change the default value of PcdPropertiesTableEnable from
the inherited TRUE to FALSE. It makes no difference at this point (our
runtime DXE drivers are not built with the required 4KB section alignment
anyway), but it's better to be clear about this. The properties table
feature requires OS compatibility, and it breaks Windows 7 minimally.
Therefore the default should be FALSE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18470 6f19259b-4bc3-4df7-8a09-765794883524
Plus, because PcdSetNxForStack is used by the DXE IPL PEIM (in the
HandOffToDxeCore() function, and in the CreateIdentityMappingPageTables()
function called by the former), we must change the PcdLib class resolution
for that module, from the default BasePcdLibNull to PeiPcdLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18469 6f19259b-4bc3-4df7-8a09-765794883524
Allow platforms to instantiate this PCD as PcdsDynamic and PcdsDynamicEx
too, not just PcdsFixedAtBuild and PcdsPatchableInModule.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18468 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Remove a hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback".
1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record
AtRuntime flag.
1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot
script data to handle potential INSERT boot script at runtime in SMM.
2. Do not depend on OS to help restore ACPINvs data and use
EfiReservedMemoryType instead of EfiACPIMemoryNVS.
2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script
SMM private data with BackFromS3 = TRUE at runtime. S3 resume
will help restore it to tell the Library the system is back
from S3.
Why to do:
1. The hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback" will cause confusion to
the library's consumer and block the usage of "SMM driver writes
BootScript after SmmReadyToLock". So Remove the assumption.
2. In original code, there might be a corner case that malicious
code patch ACPINvs boot TableLength field same as SMM boot script.
So that it can skip the table restore. The impact is that BootScript
in SMM may be overridden by malicious code.
--------------------
CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS
......
//
// NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length.
//
mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped.
--------------------
So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code
has been updated to not depend on OS to help restore ACPINvs data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
There are other libraries with similarly named functions that could be linked with the Shell
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18456 6f19259b-4bc3-4df7-8a09-765794883524
The driver binding start function in SNP.c goes through all the BARs and get
the last BAR index for use. Theoretically it should work with all valid BARs,
but we got reports some device did always use the first valid BAR, so we change
the logic in SNP to use the first found BAR index instead of the last one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18455 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
The fix r18449 missed 1 line which will cause Http.Request() ASSERT. This patch
will correct this error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18453 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the HttpDxe driver to use the DPC mechanism to avoid long
time delay when single event.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18451 6f19259b-4bc3-4df7-8a09-765794883524
This patch contains a bug fix in HTTP driver that the RxToken is not closed,
this is one of the main reasons which lower the HTTP download speed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18450 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the HTTP driver to use a shared buffer for URL parsing to
avoid memory allocation for each HTTP request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18449 6f19259b-4bc3-4df7-8a09-765794883524
The original HTTP boot driver always save the received message body in its cache,
it bring a large of memory allocation during HTTP download. This patch updates
the HTTP boot driver to only cache data when caller doesn't provide a buffer for
download (which is usually used when caller want to get the required buffer size).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18448 6f19259b-4bc3-4df7-8a09-765794883524
HTTP boot driver uses block size of 1024 when receiving HTTP message body,
but typically the MTU of Ethernet is 1500 bytes so it makes 1 TCP segment data
split into 2 Http.Response call. This patch enlarges the block size to avoid
this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18447 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix a bug of removing the checkpoint for STATIC modifier
2. Fix a bug of parsing CONST variable
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: YangX Li <yangx.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18446 6f19259b-4bc3-4df7-8a09-765794883524
SVN commit r18077 ("BaseTools/GenFw: move .debug contents to .data to
save space") removed the separate .debug section after moving its
contents into .text or .data. However, this change does not take into
account that some of these contents need to appear at a 32-bit aligned
offset. So align the debug data RVA to 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18443 6f19259b-4bc3-4df7-8a09-765794883524
The specification of the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()
function documents the EFI_BAD_BUFFER_SIZE return status, and the
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN host adapter
status.
These allow an EFI_EXT_SCSI_PASS_THRU_PROTOCOL implementation to request
higher layers in the stack (in this instance, UefiScsiLib and ScsiDiskDxe)
to break up the transfer into smaller pieces.
These conditions percolate up the stack correctly: the retry loops in
ScsiDiskDxe's ScsiDiskReadSectors() and ScsiDiskWriteSectors() functions
correctly and transparently update the transfer size (ByteCount),
accommodating any shortening requested by lower levels of the stack. After
the loop -- if the request ultimately succeeds -- SectorCount is even
recalculated from the final ByteCount, to see how many sectors the outer
loop should advance.
However, the inner (ie. retry) loops both have the same error: when the
underlying protocols request the transfer to be shortened, the decrease in
transfer size (ie. ByteCount) should immediately be reflected in
SectorCount. Otherwise the sector count encoded in the CDB will exceed the
transfer size, which is a permanent error.
This issue has been witnessed while booting
en_windows_8.1_pro_n_vl_with_update_x86_dvd_6051127.iso
on the 32-bit build of OVMF, from a virtio-scsi CD-ROM:
(1) "cdboot.efi" correctly requested (from far atop) a long read:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=134215680
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | number of 2KB sectors to read,
| | corresponding to 2048 * 65535 = 134215680 bytes
| | (see InTransferLength above)
| |
| LBA to read from
|
READ (10)
(2) In turn, the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() function
provided by "OvmfPkg/VirtioScsiDxe/VirtioScsi.c" asked for the request
to be shortened:
InTransferLength=16776704
OutTransferLength=16776704
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_BAD_BUFFER_SIZE
(3) Then ScsiDiskReadSectors() in
"MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c" retried the request
with correctly shortened transfer length, but incorrectly unchanged
sector count:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=16776704 <--- updated as requested
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | not changed!
| |
| LBA to read from
|
READ (10)
(4) Since 65535 sectors of 2KB each wouldn't fit in a buffer of approx.
16MB, QEMU's virtio-scsi controller unconditionally rejected this
request with VIRTIO_SCSI_S_OVERRUN, which VirtioScsiDxe then mapped
to:
InTransferLength=16776704
OutTransferLength=0
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_DEVICE_ERROR
(5) After two more tries of the same, ScsiDiskDxe passed up the error,
which ultimately caused "cdboot.efi" to BSOD.
Many thanks to Larry Cleeton from Microsoft for helping debug
"cdboot.efi".
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18438 6f19259b-4bc3-4df7-8a09-765794883524
Acting specifically upon this error condition from UefiScsiLib (and
ultimately from EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()) in the
- ScsiDiskRead10(),
- ScsiDiskWrite10(),
- ScsiDiskRead16(),
- ScsiDiskWrite16()
functions allows us to retry these operations from ScsiDiskReadSectors()
and ScsiDiskWriteSectors(), with adjusted transfer sizes, without
investigating further error details like Host Adapter Status, Target
Status, and Sense Data.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18437 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18436 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18435 6f19259b-4bc3-4df7-8a09-765794883524
EFI_SCSI_IO_PROTOCOL has alignment requirement on any data buffer
used in SCSI data transfer. As a wrap of this protocol, UefiScsiLib
have same request. Adding EFI_INVALID_PARAMETER return status in
function comments to ask the caller to guarantee this alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18434 6f19259b-4bc3-4df7-8a09-765794883524
When boot from Shell we can use '-delay [num]' as optional data. If blank space exist after '[num]' Shell will fail. This patch add error handling to avoid this failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18431 6f19259b-4bc3-4df7-8a09-765794883524
For 32-bit ARM platforms, it is essential that system memory starts
below the 4 GB limit, since that is the only memory we can address
using the UEFI spec mandated 1:1 mapping. So assert that this is the
case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18429 6f19259b-4bc3-4df7-8a09-765794883524
When executing on a LPAE capable 32-bit ARM platform, we support
up to 40 bits of physical address space so set PcdPrePiCpuMemorySize
accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18428 6f19259b-4bc3-4df7-8a09-765794883524
On 32-bit ARM, split system memory into a region below (and up to) 4 GB
and a region above 4 GB. This is necessary to get the DXE core to consider
the former as the resource descriptor that describes the primary memory
region that also covers the PHIT region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18427 6f19259b-4bc3-4df7-8a09-765794883524
Make sure that the PEI memory region is carved out of memory that is
32-bit addressable, by taking MAX_ADDRESS into account (which is
defined as '4 GB - 1' on ARM)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18426 6f19259b-4bc3-4df7-8a09-765794883524
During page entry attribute update, if there are table entries
between starting BlockEntry and LastBlockEntry, table entries will be
set as block entries and the allocated memory of the tables will be
leaked.
So instead, we break the inner loop when we find a table entry and run
outer loop again to step into the table by the same logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
[ardb: move termination condition check inside the loop]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18425 6f19259b-4bc3-4df7-8a09-765794883524
Samer El-Haj-Mahmoud
Star Zeng
Qiu Shumin
Dandan Bi
Jeff Fan
Yang Jadis
Eric Dong
Jiaxin Wu
Fu Siyuan
Ruiyu Ni
Laszlo Ersek
Hess Chen
Liming Gao
Ard Biesheuvel
Zhang Lubo
Feng Tian
Heyi Guo